| [ 0.000000] Linux version 5.5.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-10)) #1 SMP Debian 5.5.17-1 (2020-04-15) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.5.0-2-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff28fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff29000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.11-2314-g1f3055aa36 04/22/2020 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2893.491 MHz processor |
| [ 0.002030] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.002032] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.002035] last_pfn = 0x47b600 max_arch_pfn = 0x400000000 |
| [ 0.002039] MTRR default type: write-back |
| [ 0.002040] MTRR fixed ranges enabled: |
| [ 0.002041] 00000-9FFFF write-back |
| [ 0.002042] A0000-BFFFF uncachable |
| [ 0.002043] C0000-FFFFF write-back |
| [ 0.002043] MTRR variable ranges enabled: |
| [ 0.002044] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.002045] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.002046] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.002047] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.002047] 4 disabled |
| [ 0.002048] 5 disabled |
| [ 0.002048] 6 disabled |
| [ 0.002048] 7 disabled |
| [ 0.002049] 8 disabled |
| [ 0.002049] 9 disabled |
| [ 0.002317] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.002660] last_pfn = 0x7ff29 max_arch_pfn = 0x400000000 |
| [ 0.012000] BRK [0x1e6c01000, 0x1e6c01fff] PGTABLE |
| [ 0.012002] BRK [0x1e6c02000, 0x1e6c02fff] PGTABLE |
| [ 0.012003] BRK [0x1e6c03000, 0x1e6c03fff] PGTABLE |
| [ 0.012034] BRK [0x1e6c04000, 0x1e6c04fff] PGTABLE |
| [ 0.012035] BRK [0x1e6c05000, 0x1e6c05fff] PGTABLE |
| [ 0.012136] BRK [0x1e6c06000, 0x1e6c06fff] PGTABLE |
| [ 0.012163] BRK [0x1e6c07000, 0x1e6c07fff] PGTABLE |
| [ 0.012356] RAMDISK: [mem 0x308d1000-0x3445ffff] |
| [ 0.012362] ACPI: Early table checksum verification disabled |
| [ 0.012365] ACPI: RSDP 0x00000000000F67B0 000024 (v02 COREv4) |
| [ 0.012368] ACPI: XSDT 0x000000007FF4F0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20200110) |
| [ 0.012373] ACPI: FACP 0x000000007FF52CC0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200110) |
| [ 0.012377] ACPI: DSDT 0x000000007FF4F280 003A39 (v02 COREv4 COREBOOT 20110725 INTL 20200110) |
| [ 0.012380] ACPI: FACS 0x000000007FF4F240 000040 |
| [ 0.012383] ACPI: FACS 0x000000007FF4F240 000040 |
| [ 0.012385] ACPI: SSDT 0x000000007FF52DE0 001AC5 (v02 COREv4 COREBOOT 0000002A CORE 20200110) |
| [ 0.012387] ACPI: MCFG 0x000000007FF548B0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200110) |
| [ 0.012390] ACPI: TCPA 0x000000007FF548F0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20200110) |
| [ 0.012393] ACPI: APIC 0x000000007FF54930 00006C (v03 COREv4 COREBOOT 00000000 CORE 20200110) |
| [ 0.012395] ACPI: DMAR 0x000000007FF549A0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20200110) |
| [ 0.012398] ACPI: HPET 0x000000007FF56A70 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200110) |
| [ 0.012404] ACPI: Local APIC address 0xfee00000 |
| [ 0.012476] No NUMA configuration found |
| [ 0.012477] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff] |
| [ 0.012480] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff] |
| [ 0.012509] Zone ranges: |
| [ 0.012510] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.012511] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.012512] Normal [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.012513] Device empty |
| [ 0.012514] Movable zone start for each node |
| [ 0.012515] Early memory node ranges |
| [ 0.012515] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.012517] node 0: [mem 0x0000000000100000-0x000000007ff28fff] |
| [ 0.012518] node 0: [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.012678] Zeroed struct page in unavailable ranges: 19257 pages |
| [ 0.012679] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff] |
| [ 0.012681] On node 0 totalpages: 4175047 |
| [ 0.012682] DMA zone: 64 pages used for memmap |
| [ 0.012682] DMA zone: 21 pages reserved |
| [ 0.012683] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.012747] DMA32 zone: 8125 pages used for memmap |
| [ 0.012748] DMA32 zone: 519977 pages, LIFO batch:63 |
| [ 0.023317] Normal zone: 57048 pages used for memmap |
| [ 0.023318] Normal zone: 3651072 pages, LIFO batch:63 |
| [ 0.023868] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.024249] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.024251] ACPI: Local APIC address 0xfee00000 |
| [ 0.024267] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.024269] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.024270] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.024272] ACPI: IRQ0 used by override. |
| [ 0.024272] ACPI: IRQ9 used by override. |
| [ 0.024274] Using ACPI (MADT) for SMP configuration information |
| [ 0.024276] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.024279] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.024290] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.024291] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.024292] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.024293] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.024294] PM: Registered nosave memory: [mem 0x7ff29000-0x829fffff] |
| [ 0.024295] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.024295] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.024296] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.024297] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.024298] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.024298] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.024299] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.024301] [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.024302] Booting paravirtualized kernel on bare hardware |
| [ 0.024304] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.112679] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.112859] percpu: Embedded 55 pages/cpu s187800 r8192 d29288 u524288 |
| [ 0.112865] pcpu-alloc: s187800 r8192 d29288 u524288 alloc=1*2097152 |
| [ 0.112866] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.112884] Built 1 zonelists, mobility grouping on. Total pages: 4109789 |
| [ 0.112885] Policy zone: Normal |
| [ 0.112887] Kernel command line: BOOT_IMAGE=/vmlinuz-5.5.0-2-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.113670] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) |
| [ 0.114044] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) |
| [ 0.114092] mem auto-init: stack:off, heap alloc:off, heap free:off |
| [ 0.126855] Memory: 2100364K/16700188K available (10243K kernel code, 1221K rwdata, 3972K rodata, 1672K init, 1980K bss, 439364K reserved, 0K cma-reserved) |
| [ 0.126861] random: get_random_u64 called from __kmem_cache_create+0x3e/0x530 with crng_init=0 |
| [ 0.126955] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.126966] Kernel/User page tables isolation: enabled |
| [ 0.126979] ftrace: allocating 34294 entries in 134 pages |
| [ 0.138603] ftrace: allocated 134 pages with 3 groups |
| [ 0.138669] rcu: Hierarchical RCU implementation. |
| [ 0.138670] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.138672] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.138672] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.141335] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.141542] random: crng done (trusting CPU's manufacturer) |
| [ 0.143078] Console: colour VGA+ 80x25 |
| [ 0.148594] printk: console [tty0] enabled |
| [ 0.148657] ACPI: Core revision 20191018 |
| [ 0.148772] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.148854] APIC: Switch to symmetric I/O mode setup |
| [ 0.148908] DMAR: Host address width 36 |
| [ 0.148962] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.149020] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.149089] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff |
| [ 0.149147] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.149202] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.149268] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.149327] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.149382] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.149830] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.149886] x2apic enabled |
| [ 0.149943] Switched APIC routing to cluster x2apic. |
| [ 0.150425] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.168855] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b53e5e924, max_idle_ns: 440795311399 ns |
| [ 0.168929] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.98 BogoMIPS (lpj=11573964) |
| [ 0.169002] pid_max: default: 32768 minimum: 301 |
| [ 0.169081] LSM: Security Framework initializing |
| [ 0.169141] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.169215] AppArmor: AppArmor initialized |
| [ 0.169268] TOMOYO Linux initialized |
| [ 0.169356] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.169449] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.169728] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.169791] process: using mwait in idle threads |
| [ 0.169847] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.169902] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.169960] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.170027] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.170082] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.170148] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.170206] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.170273] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.170329] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.170400] MDS: Mitigation: Clear CPU buffers |
| [ 0.170606] Freeing SMP alternatives memory: 32K |
| [ 0.172253] TSC deadline timer enabled |
| [ 0.172256] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.172425] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.172501] ... version: 3 |
| [ 0.172554] ... bit width: 48 |
| [ 0.172607] ... generic registers: 4 |
| [ 0.172661] ... value mask: 0000ffffffffffff |
| [ 0.172715] ... max period: 00007fffffffffff |
| [ 0.172769] ... fixed-purpose events: 3 |
| [ 0.172823] ... event mask: 000000070000000f |
| [ 0.172907] rcu: Hierarchical SRCU implementation. |
| [ 0.172927] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.172927] smp: Bringing up secondary CPUs ... |
| [ 0.172927] x86: Booting SMP configuration: |
| [ 0.172927] .... node #0, CPUs: #1 |
| [ 0.173005] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| [ 0.173174] #2 #3 |
| [ 0.179058] smp: Brought up 1 node, 4 CPUs |
| [ 0.179058] smpboot: Max logical packages: 1 |
| [ 0.179058] smpboot: Total of 4 processors activated (23147.92 BogoMIPS) |
| [ 0.224939] node 0 initialised, 3540115 pages in 48ms |
| [ 0.225263] devtmpfs: initialized |
| [ 0.225263] x86/mm: Memory block size: 128MB |
| [ 0.226431] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.228934] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| [ 0.229043] pinctrl core: initialized pinctrl subsystem |
| [ 0.229161] thermal_sys: Registered thermal governor 'fair_share' |
| [ 0.229162] thermal_sys: Registered thermal governor 'bang_bang' |
| [ 0.229217] thermal_sys: Registered thermal governor 'step_wise' |
| [ 0.229273] thermal_sys: Registered thermal governor 'user_space' |
| [ 0.229400] NET: Registered protocol family 16 |
| [ 0.230848] audit: initializing netlink subsys (disabled) |
| [ 0.230908] audit: type=2000 audit(1587590771.080:1): state=initialized audit_enabled=0 res=1 |
| [ 0.230908] cpuidle: using governor ladder |
| [ 0.230908] cpuidle: using governor menu |
| [ 0.230908] ACPI: bus type PCI registered |
| [ 0.230908] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.230908] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.230908] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.230908] PCI: Using configuration type 1 for base access |
| [ 0.230908] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.233042] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.381009] ACPI: Added _OSI(Module Device) |
| [ 0.381065] ACPI: Added _OSI(Processor Device) |
| [ 0.381119] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.381173] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.381227] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.381283] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.381337] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.381857] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.382583] ACPI: EC: EC started |
| [ 0.382636] ACPI: EC: interrupt blocked |
| [ 0.382945] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.383001] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.383069] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions |
| [ 0.383137] ACPI: Interpreter enabled |
| [ 0.383204] ACPI: (supports S0 S3 S4 S5) |
| [ 0.383259] ACPI: Using IOAPIC for interrupt routing |
| [ 0.383327] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.383508] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.387945] ACPI: Power Resource [FPWR] (off) |
| [ 0.388225] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.388284] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.388284] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.388284] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.388284] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]) |
| [ 0.388284] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff]) |
| [ 0.388284] PCI host bridge to bus 0000:00 |
| [ 0.388284] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.388284] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.388284] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.388284] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.388284] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit] |
| [ 0.388284] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.388284] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] |
| [ 0.388284] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.388284] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit] |
| [ 0.388284] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.388284] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit] |
| [ 0.388284] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.388284] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.388284] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff] |
| [ 0.388284] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff] |
| [ 0.388284] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f] |
| [ 0.388284] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.388284] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.388284] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff] |
| [ 0.388284] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.388386] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.388462] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit] |
| [ 0.388588] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.388721] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400 |
| [ 0.388930] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.389018] pci 0000:00:1c.0: Enabling MPC IRBNCE |
| [ 0.389073] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled |
| [ 0.389214] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400 |
| [ 0.389443] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.389529] pci 0000:00:1c.1: Enabling MPC IRBNCE |
| [ 0.389587] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled |
| [ 0.389724] pci 0000:00:1c.2: [8086:1e18] type 01 class 0x060400 |
| [ 0.389953] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.390040] pci 0000:00:1c.2: Enabling MPC IRBNCE |
| [ 0.390095] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled |
| [ 0.390231] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.390305] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b40000-0xe2b403ff] |
| [ 0.390440] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.390569] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.390787] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.390861] pci 0000:00:1f.2: reg 0x10: [io 0x4080-0x4087] |
| [ 0.390923] pci 0000:00:1f.2: reg 0x14: [io 0x4090-0x4093] |
| [ 0.390981] pci 0000:00:1f.2: reg 0x18: [io 0x4088-0x408f] |
| [ 0.391042] pci 0000:00:1f.2: reg 0x1c: [io 0x4094-0x4097] |
| [ 0.391104] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] |
| [ 0.391165] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3e000-0xe2b3e7ff] |
| [ 0.391260] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.391377] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.391448] pci 0000:00:1f.3: reg 0x10: [mem 0xe2b41000-0xe2b410ff 64bit] |
| [ 0.391524] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.391658] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.391737] pci 0000:00:1f.6: reg 0x10: [mem 0xe2b3d000-0xe2b3dfff 64bit] |
| [ 0.392012] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000 |
| [ 0.392160] pci 0000:01:00.0: reg 0x10: [mem 0xe2a00000-0xe2a07fff 64bit] |
| [ 0.392278] pci 0000:01:00.0: reg 0x18: [mem 0xe2800000-0xe29fffff 64bit] |
| [ 0.392580] pci 0000:01:00.0: supports D1 D2 |
| [ 0.392634] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.392990] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.393053] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| [ 0.393421] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500 |
| [ 0.393714] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.394016] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff] |
| [ 0.394589] pci 0000:02:00.0: supports D1 D2 |
| [ 0.394641] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.395290] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.395345] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.395405] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.395467] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.395604] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.395661] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.395722] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| [ 0.395787] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.395999] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.396095] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.396187] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.396278] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.396369] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.396460] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.396552] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.396642] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.400940] ACPI: EC: interrupt unblocked |
| [ 0.400940] ACPI: EC: event unblocked |
| [ 0.400940] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.400940] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events |
| [ 0.400940] iommu: Default domain type: Translated |
| [ 0.400941] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.400991] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.401062] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.401117] vgaarb: loaded |
| [ 0.401225] EDAC MC: Ver: 3.0.0 |
| [ 0.401407] PCI: Using ACPI for IRQ routing |
| [ 0.401905] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.402432] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.402433] e820: reserve RAM buffer [mem 0x7ff29000-0x7fffffff] |
| [ 0.402434] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff] |
| [ 0.403027] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.403086] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.404985] clocksource: Switched to clocksource tsc-early |
| [ 0.414034] VFS: Disk quotas dquot_6.6.0 |
| [ 0.414103] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.414254] AppArmor: AppArmor Filesystem Enabled |
| [ 0.415592] pnp: PnP ACPI init |
| [ 0.415797] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.415856] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.415912] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.415970] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.416030] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.416088] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.416146] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.416202] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.416260] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.416318] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.416380] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.416755] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.416817] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.416845] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.416902] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.416967] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.416984] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.417009] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.417028] pnp 00:05: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) |
| [ 0.417048] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.417069] pnp: PnP ACPI: found 7 devices |
| [ 0.422611] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.422713] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.422774] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| [ 0.422842] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.422898] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.422958] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.423018] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.423089] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.423145] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.423205] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| [ 0.423265] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.423340] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.423397] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.423455] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.423513] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.423569] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.423626] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.423682] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window] |
| [ 0.423740] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window] |
| [ 0.423797] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window] |
| [ 0.423854] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window] |
| [ 0.423911] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window] |
| [ 0.423969] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window] |
| [ 0.424027] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window] |
| [ 0.424084] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window] |
| [ 0.424142] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window] |
| [ 0.424200] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window] |
| [ 0.424258] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe2afffff] |
| [ 0.424315] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.424368] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff] |
| [ 0.424426] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.424494] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] |
| [ 0.424550] pci_bus 0000:03: resource 1 [mem 0xe1c00000-0xe23fffff] |
| [ 0.424608] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.424735] NET: Registered protocol family 2 |
| [ 0.424890] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) |
| [ 0.424979] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) |
| [ 0.425190] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) |
| [ 0.425353] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.425430] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.425515] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.425657] NET: Registered protocol family 1 |
| [ 0.425714] NET: Registered protocol family 44 |
| [ 0.425775] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.426577] PCI: CLS 64 bytes, default 64 |
| [ 0.426669] Trying to unpack rootfs image as initramfs... |
| [ 1.187215] Freeing initrd memory: 60988K |
| [ 1.187318] DMAR: No ATSR found |
| [ 1.187400] DMAR: dmar0: Using Queued invalidation |
| [ 1.187461] DMAR: dmar1: Using Queued invalidation |
| [ 1.255635] pci 0000:00:00.0: Adding to iommu group 0 |
| [ 1.258479] pci 0000:00:02.0: Adding to iommu group 1 |
| [ 1.258550] pci 0000:00:02.0: Using iommu direct mapping |
| [ 1.258635] pci 0000:00:04.0: Adding to iommu group 2 |
| [ 1.258726] pci 0000:00:14.0: Adding to iommu group 3 |
| [ 1.258813] pci 0000:00:19.0: Adding to iommu group 4 |
| [ 1.258907] pci 0000:00:1a.0: Adding to iommu group 5 |
| [ 1.258995] pci 0000:00:1b.0: Adding to iommu group 6 |
| [ 1.259087] pci 0000:00:1c.0: Adding to iommu group 7 |
| [ 1.259178] pci 0000:00:1c.1: Adding to iommu group 8 |
| [ 1.259262] pci 0000:00:1c.2: Adding to iommu group 9 |
| [ 1.259352] pci 0000:00:1d.0: Adding to iommu group 10 |
| [ 1.260745] pci 0000:00:1f.0: Adding to iommu group 11 |
| [ 1.260811] pci 0000:00:1f.2: Adding to iommu group 11 |
| [ 1.260878] pci 0000:00:1f.3: Adding to iommu group 11 |
| [ 1.260949] pci 0000:00:1f.6: Adding to iommu group 11 |
| [ 1.261045] pci 0000:01:00.0: Adding to iommu group 12 |
| [ 1.261135] pci 0000:02:00.0: Adding to iommu group 13 |
| [ 1.261196] DMAR: Intel(R) Virtualization Technology for Directed I/O |
| [ 1.263261] Initialise system trusted keyrings |
| [ 1.263324] Key type blacklist registered |
| [ 1.263421] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 1.264473] zbud: loaded |
| [ 1.264663] Platform Keyring initialized |
| [ 1.264721] Key type asymmetric registered |
| [ 1.264778] Asymmetric key parser 'x509' registered |
| [ 1.264841] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 1.264953] io scheduler mq-deadline registered |
| [ 1.265248] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 |
| [ 1.265511] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27 |
| [ 1.265595] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.265917] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28 |
| [ 1.266001] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.266217] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 1.266287] intel_idle: MWAIT substates: 0x21120 |
| [ 1.266287] intel_idle: v0.4.1 model 0x3A |
| [ 1.266431] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 1.267717] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.267777] ACPI: Thermal Zone [THM0] (62 C) |
| [ 1.268585] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.268644] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.268766] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.269183] Linux agpgart interface v0.103 |
| [ 1.269283] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.269343] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 1.269609] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.271356] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.271417] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.271555] mousedev: PS/2 mouse device common for all mice |
| [ 1.271646] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.271872] rtc_cmos 00:03: registered as rtc0 |
| [ 1.271944] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.272033] intel_pstate: Intel P-state driver initializing |
| [ 1.272247] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.272500] drop_monitor: Initializing network drop monitor service |
| [ 1.272906] NET: Registered protocol family 10 |
| [ 1.273062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.291783] Segment Routing with IPv6 |
| [ 1.291880] mip6: Mobile IPv6 |
| [ 1.291941] NET: Registered protocol family 17 |
| [ 1.292068] mpls_gso: MPLS GSO support |
| [ 1.292700] microcode: sig=0x306a9, pf=0x10, revision=0x21 |
| [ 1.292795] microcode: Microcode Update Driver: v2.2. |
| [ 1.292800] IPI shorthand broadcast: enabled |
| [ 1.292969] sched_clock: Marking stable (1285522404, 7411526)->(1298995960, -6062030) |
| [ 1.293393] registered taskstats version 1 |
| [ 1.293464] Loading compiled-in X.509 certificates |
| [ 1.333394] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
| [ 1.333510] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' |
| [ 1.333609] zswap: loaded using pool lzo/zbud |
| [ 1.333803] Key type ._fscrypt registered |
| [ 1.333863] Key type .fscrypt registered |
| [ 1.333942] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.334370] rtc_cmos 00:03: setting system clock to 2020-04-22T21:26:12 UTC (1587590772) |
| [ 1.335836] Freeing unused kernel image (initmem) memory: 1672K |
| [ 1.360968] Write protecting the kernel read-only data: 16384k |
| [ 1.361885] Freeing unused kernel image (text/rodata gap) memory: 2044K |
| [ 1.362142] Freeing unused kernel image (rodata/data gap) memory: 124K |
| [ 1.373684] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.373745] x86/mm: Checking user space page tables |
| [ 1.381025] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.381084] Run /init as init process |
| [ 1.487971] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/PNP0C09:00/PNP0C0E:00/input/input2 |
| [ 1.488098] ACPI: Sleep Button [SLPB] |
| [ 1.488208] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/PNP0C09:00/PNP0C0D:00/input/input3 |
| [ 1.488315] ACPI: Lid Switch [LID] |
| [ 1.488424] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| [ 1.488528] ACPI: Power Button [PWRF] |
| [ 1.504446] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.504506] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.505947] PTP clock support registered |
| [ 1.523604] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.523664] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.525023] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.530431] ACPI: bus type USB registered |
| [ 1.530507] usbcore: registered new interface driver usbfs |
| [ 1.530570] usbcore: registered new interface driver hub |
| [ 1.530649] usbcore: registered new device driver usb |
| [ 1.538143] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.539041] ehci-pci: EHCI PCI platform driver |
| [ 1.539194] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20191018/utaddress-204) |
| [ 1.539236] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.539291] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.539354] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.539367] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.539658] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20191018/utaddress-204) |
| [ 1.539793] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.539898] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20191018/utaddress-204) |
| [ 1.540036] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.540141] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20191018/utaddress-204) |
| [ 1.540278] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.540382] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 1.542139] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.543296] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.543409] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3f000 |
| [ 1.548908] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 1.549134] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 1.549500] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.549560] sdhci: Copyright(c) Pierre Ossman |
| [ 1.556810] SCSI subsystem initialized |
| [ 1.557048] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.557172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 |
| [ 1.557243] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.557313] usb usb1: Product: EHCI Host Controller |
| [ 1.557370] usb usb1: Manufacturer: Linux 5.5.0-2-amd64 ehci_hcd |
| [ 1.557430] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.557818] cryptd: max_cpu_qlen set to 1000 |
| [ 1.563714] hub 1-0:1.0: USB hub found |
| [ 1.563779] hub 1-0:1.0: 3 ports detected |
| [ 1.564133] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.564202] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 1.564605] AVX version of gcm_enc/dec engaged. |
| [ 1.564662] AES CTR mode by8 optimization enabled |
| [ 1.565358] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.565441] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.565661] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 |
| [ 1.565733] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.565803] usb usb2: Product: xHCI Host Controller |
| [ 1.565861] usb usb2: Manufacturer: Linux 5.5.0-2-amd64 xhci-hcd |
| [ 1.565919] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 1.568887] hub 2-0:1.0: USB hub found |
| [ 1.569083] hub 2-0:1.0: 4 ports detected |
| [ 1.569333] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.569396] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 1.569472] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.569550] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.569666] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05 |
| [ 1.569740] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.569814] usb usb3: Product: xHCI Host Controller |
| [ 1.569878] usb usb3: Manufacturer: Linux 5.5.0-2-amd64 xhci-hcd |
| [ 1.569939] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 1.574334] hub 3-0:1.0: USB hub found |
| [ 1.574408] hub 3-0:1.0: 4 ports detected |
| [ 1.574732] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| [ 1.574815] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.578791] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.578949] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b40000 |
| [ 1.587901] libata version 3.00 loaded. |
| [ 1.592949] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.592969] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7) |
| [ 1.593475] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.593745] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.603131] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 |
| [ 1.603212] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.603283] usb usb4: Product: EHCI Host Controller |
| [ 1.603341] usb usb4: Manufacturer: Linux 5.5.0-2-amd64 ehci_hcd |
| [ 1.603402] usb usb4: SerialNumber: 0000:00:1d.0 |
| [ 1.603604] hub 4-0:1.0: USB hub found |
| [ 1.603674] hub 4-0:1.0: 3 ports detected |
| [ 1.613323] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.614670] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA |
| [ 1.629749] ahci 0000:00:1f.2: version 3.0 |
| [ 1.629914] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.640068] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode |
| [ 1.640142] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.640885] scsi host0: ahci |
| [ 1.642991] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.643269] scsi host1: ahci |
| [ 1.643399] scsi host2: ahci |
| [ 1.643524] scsi host3: ahci |
| [ 1.643649] scsi host4: ahci |
| [ 1.643768] scsi host5: ahci |
| [ 1.643855] ata1: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e100 irq 31 |
| [ 1.643925] ata2: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e180 irq 31 |
| [ 1.643994] ata3: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e200 irq 31 |
| [ 1.644062] ata4: DUMMY |
| [ 1.644116] ata5: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e300 irq 31 |
| [ 1.644183] ata6: DUMMY |
| [ 1.692030] i915 0000:00:02.0: VT-d active for gfx access |
| [ 1.692092] i915 0000:00:02.0: vgaarb: deactivate vga console |
| [ 1.692999] Console: switching to colour dummy device 80x25 |
| [ 1.693058] i915 0000:00:02.0: DMAR active, disabling use of stolen memory |
| [ 1.743582] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 1.743592] [drm] Driver supports precise vblank timestamp query. |
| [ 1.744111] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 1.744734] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66 |
| [ 1.744740] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.744780] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.745962] e1000e 0000:00:19.0 eno0: renamed from eth0 |
| [ 1.801420] [drm] Initialized i915 1.6.0 20191101 for 0000:00:02.0 on minor 0 |
| [ 1.801647] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 1.826475] acpi device:30: registered as cooling_device5 |
| [ 1.826591] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 |
| [ 1.830527] mmc0: new SD card at address 19b3 |
| [ 1.836342] mmcblk0: mmc0:19b3 SR01G 945 MiB |
| [ 1.838227] mmcblk0: p1 |
| [ 1.904978] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.936994] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.941431] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.941435] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.941681] hub 1-1:1.0: USB hub found |
| [ 1.941772] hub 1-1:1.0: 6 ports detected |
| [ 1.959603] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.960611] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133 |
| [ 1.960620] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA |
| [ 1.960774] ata1.00: configured for UDMA/133 |
| [ 1.960996] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5 |
| [ 1.973589] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.973600] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.974193] hub 4-1:1.0: USB hub found |
| [ 1.974301] hub 4-1:1.0: 8 ports detected |
| [ 2.131640] fbcon: i915drmfb (fb0) is primary device |
| [ 2.229019] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.252810] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 2.260988] usb 4-1.5: new high-speed USB device number 3 using ehci-pci |
| [ 2.276158] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.290118] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00 |
| [ 2.290122] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.290643] hub 4-1.5:1.0: USB hub found |
| [ 2.290827] hub 4-1.5:1.0: 6 ports detected |
| [ 2.293153] tsc: Refined TSC clocksource calibration: 2893.432 MHz |
| [ 2.293165] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b506bc3f7, max_idle_ns: 440795308319 ns |
| [ 2.293189] clocksource: Switched to clocksource tsc |
| [ 2.313631] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133 |
| [ 2.313633] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 2.314866] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| [ 2.314875] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.338991] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01 |
| [ 2.338994] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.338997] usb 1-1.3: Product: Biometric Coprocessor |
| [ 2.338999] usb 1-1.3: Manufacturer: Auth |
| [ 2.354439] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 |
| [ 2.363491] ata2.00: configured for UDMA/133 |
| [ 2.372999] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5 |
| [ 2.416980] usb 1-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 2.529768] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.529771] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.529773] usb 1-1.4: Product: BCM20702A0 |
| [ 2.529775] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.529777] usb 1-1.4: SerialNumber: B8763FA9D32E |
| [ 2.581027] usb 4-1.5.1: new full-speed USB device number 4 using ehci-pci |
| [ 2.609024] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.649471] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 2.649475] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.649477] usb 1-1.6: Product: Integrated Camera |
| [ 2.649479] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 2.688092] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.688532] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.688678] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RR, max UDMA/133 |
| [ 2.688680] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.689498] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.689993] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.690936] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.690943] ata3.00: configured for UDMA/133 |
| [ 2.691392] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RR PQ: 0 ANSI: 5 |
| [ 2.697838] usb 4-1.5.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10 |
| [ 2.697841] usb 4-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.697843] usb 4-1.5.1: Product: USB Receiver |
| [ 2.697845] usb 4-1.5.1: Manufacturer: Logitech |
| [ 2.710999] hid: raw HID events driver (C) Jiri Kosina |
| [ 2.722563] usbcore: registered new interface driver usbhid |
| [ 2.722564] usbhid: USB HID core driver |
| [ 2.724704] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.0/0003:046D:C52B.0001/input/input8 |
| [ 2.742097] usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 2.777039] usb 4-1.5.3: new high-speed USB device number 5 using ehci-pci |
| [ 2.781512] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input0 |
| [ 2.782089] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input9 |
| [ 2.782280] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input10 |
| [ 2.806103] usb 4-1.5.3: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 2.806107] usb 4-1.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.806853] hub 4-1.5.3:1.0: USB hub found |
| [ 2.808856] hub 4-1.5.3:1.0: 3 ports detected |
| [ 2.841142] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input11 |
| [ 2.841550] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input1 |
| [ 2.842406] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2 |
| [ 2.886363] usb 3-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21 |
| [ 2.886366] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.886369] usb 3-3: Product: USB3.0 Hub |
| [ 2.886370] usb 3-3: Manufacturer: VIA Labs, Inc. |
| [ 2.888970] usb 4-1.5.6: new high-speed USB device number 6 using ehci-pci |
| [ 2.889418] hub 3-3:1.0: USB hub found |
| [ 2.889645] hub 3-3:1.0: 4 ports detected |
| [ 2.903908] Console: switching to colour frame buffer device 240x67 |
| [ 2.918110] usb 4-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 2.918113] usb 4-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.918620] hub 4-1.5.6:1.0: USB hub found |
| [ 2.918840] hub 4-1.5.6:1.0: 4 ports detected |
| [ 2.988954] i915 0000:00:02.0: fb0: i915drmfb frame buffer device |
| [ 2.995893] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 3.001950] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2 |
| [ 3.008813] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 3.012972] usb 2-3: new high-speed USB device number 3 using xhci_hcd |
| [ 3.026796] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) |
| [ 3.026852] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| [ 3.029069] sd 0:0:0:0: [sda] Write Protect is off |
| [ 3.031056] sd 2:0:0:0: [sdc] 4096-byte physical blocks |
| [ 3.032984] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| [ 3.032986] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| [ 3.032997] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 3.032999] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 3.033014] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.033605] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 3.033629] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.035707] sd 2:0:0:0: [sdc] Write Protect is off |
| [ 3.038941] usb 2-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21 |
| [ 3.039436] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| [ 3.040657] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.042716] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.044092] usb 2-3: Product: USB2.0 Hub |
| [ 3.044092] usb 2-3: Manufacturer: VIA Labs, Inc. |
| [ 3.044718] hub 2-3:1.0: USB hub found |
| [ 3.055126] hub 2-3:1.0: 4 ports detected |
| [ 3.058384] sda: sda1 sda2 < sda5 > |
| [ 3.059795] sdb: sdb1 |
| [ 3.060132] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.061727] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 3.069562] sdc: sdc1 sdc2 sdc3 |
| [ 3.071591] sd 2:0:0:0: [sdc] Attached SCSI disk |
| [ 3.100939] usb 4-1.5.3.3: new full-speed USB device number 7 using ehci-pci |
| [ 3.130723] input: Logitech Unifying Device. Wireless PID:1028 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input13 |
| [ 3.132987] hid-generic 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:1d.0-1.5.1/input2:1 |
| [ 3.169013] usb 3-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd |
| [ 3.172156] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input17 |
| [ 3.175973] logitech-hidpp-device 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.5.1/input2:1 |
| [ 3.189705] usb 3-2: New USB device found, idVendor=1f75, idProduct=0916, bcdDevice= 0.0d |
| [ 3.191931] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 3.193826] usb 3-2: Product: Intenso Speed Line |
| [ 3.195398] usb 3-2: Manufacturer: Innostor Technology |
| [ 3.196968] usb 3-2: SerialNumber: 13090900002035 |
| [ 3.203854] usb-storage 3-2:1.0: USB Mass Storage device detected |
| [ 3.205770] scsi host6: usb-storage 3-2:1.0 |
| [ 3.207344] usbcore: registered new interface driver usb-storage |
| [ 3.210134] usbcore: registered new interface driver uas |
| [ 3.231702] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 |
| [ 3.436934] raid6: sse2x4 gen() 14252 MB/s |
| [ 3.444943] usb 4-1.5.2: new full-speed USB device number 8 using ehci-pci |
| [ 3.504931] raid6: sse2x4 xor() 10198 MB/s |
| [ 3.556237] usb 4-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03 |
| [ 3.558231] usb 4-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.564492] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.0/0003:04B4:4042.0005/input/input18 |
| [ 3.572934] raid6: sse2x2 gen() 10128 MB/s |
| [ 3.625893] hid-generic 0003:04B4:4042.0005: input,hidraw2: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0 |
| [ 3.632702] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input19 |
| [ 3.634495] usb 4-1.5.6.1: new high-speed USB device number 9 using ehci-pci |
| [ 3.635989] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input20 |
| [ 3.640934] raid6: sse2x2 xor() 6712 MB/s |
| [ 3.665946] usb 4-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.667414] usb 4-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.669266] hub 4-1.5.6.1:1.0: USB hub found |
| [ 3.671298] hub 4-1.5.6.1:1.0: 4 ports detected |
| [ 3.696980] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input21 |
| [ 3.698576] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input22 |
| [ 3.700155] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input23 |
| [ 3.701798] hid-generic 0003:04B4:4042.0006: input,hiddev1,hidraw3: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1 |
| [ 3.708940] raid6: sse2x1 gen() 10330 MB/s |
| [ 3.761441] usb 4-1.5.3.3: New USB device found, idVendor=056d, idProduct=0002, bcdDevice=75.30 |
| [ 3.763013] usb 4-1.5.3.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0 |
| [ 3.764580] usb 4-1.5.3.3: Product: EIZO USB HID Monitor |
| [ 3.766145] usb 4-1.5.3.3: Manufacturer: EIZO |
| [ 3.776931] raid6: sse2x1 xor() 7553 MB/s |
| [ 3.778529] raid6: using algorithm sse2x4 gen() 14252 MB/s |
| [ 3.780041] raid6: .... xor() 10198 MB/s, rmw enabled |
| [ 3.781546] raid6: using ssse3x2 recovery algorithm |
| [ 3.783852] xor: automatically using best checksumming function avx |
| [ 3.786749] async_tx: api initialized (async) |
| [ 3.965072] usb 4-1.5.6.1.2: new full-speed USB device number 10 using ehci-pci |
| [ 4.036110] device-mapper: uevent: version 1.0.3 |
| [ 4.037802] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com |
| [ 4.072722] hid-generic 0003:056D:0002.0007: hiddev2,hidraw4: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:1d.0-1.5.3.3/input0 |
| [ 4.083477] usb 4-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02 |
| [ 4.085268] usb 4-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.086984] usb 4-1.5.6.1.2: Product: IEEE-1284 Controller |
| [ 4.088701] usb 4-1.5.6.1.2: Manufacturer: Prolific Technology Inc. |
| [ 4.169055] usb 4-1.5.6.1.3: new full-speed USB device number 11 using ehci-pci |
| [ 4.213524] scsi 6:0:0:0: Direct-Access Intenso Speed Line 1.00 PQ: 0 ANSI: 6 |
| [ 4.218337] sd 6:0:0:0: [sdd] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB) |
| [ 4.223316] sd 6:0:0:0: [sdd] Write Protect is off |
| [ 4.225649] sd 6:0:0:0: [sdd] Mode Sense: 03 00 00 00 |
| [ 4.226113] sd 6:0:0:0: [sdd] No Caching mode page found |
| [ 4.228412] sd 6:0:0:0: [sdd] Assuming drive cache: write through |
| [ 4.255117] sdd: sdd1 |
| [ 4.259868] sd 6:0:0:0: [sdd] Attached SCSI removable disk |
| [ 4.282944] usb 4-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 |
| [ 4.286584] usb 4-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.290035] usb 4-1.5.6.1.3: Product: USB-Serial Controller D |
| [ 4.293422] usb 4-1.5.6.1.3: Manufacturer: Prolific Technology Inc. |
| [ 614.917886] PM: Image not found (code -22) |
| [ 614.923597] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] |
| [ 614.923600] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff] |
| [ 614.923604] PM: Marking nosave pages: [mem 0x7ff29000-0xffffffff] |
| [ 614.926277] PM: Basic memory bitmaps created |
| [ 614.927196] PM: Basic memory bitmaps freed |
| [ 614.928123] video LNXVIDEO:00: Restoring backlight state |
| [ 615.037144] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 615.107710] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. |
| [ 615.288000] systemd[1]: Inserted module 'autofs4' |
| [ 615.317430] systemd[1]: systemd 245.4-4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) |
| [ 615.337275] systemd[1]: Detected architecture x86-64. |
| [ 615.371076] systemd[1]: Set hostname to <TP-T430s>. |
| [ 615.506349] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. |
| [ 615.532785] systemd[1]: /lib/systemd/system/thinkfan.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly. |
| [ 615.537097] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. |
| [ 615.561206] systemd[1]: /lib/systemd/system/fancontrol.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. |
| [ 615.564331] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly. |
| [ 615.602611] systemd[1]: Created slice system-getty.slice. |
| [ 615.604920] systemd[1]: Created slice system-modprobe.slice. |
| [ 615.609918] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 615.618769] systemd[1]: Created slice Cryptsetup Units Slice. |
| [ 615.624483] systemd[1]: Created slice system-systemd\x2dfsck.slice. |
| [ 615.628226] systemd[1]: Created slice system-tor.slice. |
| [ 615.631955] systemd[1]: Created slice User and Session Slice. |
| [ 615.635496] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 615.639364] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 615.643021] systemd[1]: Reached target User and Group Name Lookups. |
| [ 615.646775] systemd[1]: Reached target Remote File Systems. |
| [ 615.648434] systemd[1]: Reached target Slices. |
| [ 615.652331] systemd[1]: Listening on Device-mapper event daemon FIFOs. |
| [ 615.656004] systemd[1]: Listening on LVM2 poll daemon socket. |
| [ 615.660728] systemd[1]: Listening on Syslog Socket. |
| [ 615.663425] systemd[1]: Listening on fsck to fsckd communication Socket. |
| [ 615.667023] systemd[1]: Listening on initctl Compatibility Named Pipe. |
| [ 615.670726] systemd[1]: Listening on Journal Audit Socket. |
| [ 615.674260] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 615.677850] systemd[1]: Listening on Journal Socket. |
| [ 615.681435] systemd[1]: Listening on udev Control Socket. |
| [ 615.684992] systemd[1]: Listening on udev Kernel Socket. |
| [ 615.689369] systemd[1]: Mounting Huge Pages File System... |
| [ 615.693122] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 615.696886] systemd[1]: Mounting Kernel Debug File System... |
| [ 615.700498] systemd[1]: Mounting Kernel Trace File System... |
| [ 615.704282] systemd[1]: Starting Availability of block devices... |
| [ 615.708009] systemd[1]: Starting Set the console keyboard layout... |
| [ 615.711822] systemd[1]: Starting Create list of static device nodes for the current kernel... |
| [ 615.716269] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... |
| [ 615.718976] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. |
| [ 615.719753] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. |
| [ 615.723261] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. |
| [ 615.725061] systemd[1]: Starting Journal Service... |
| [ 615.730887] systemd[1]: Starting Load Kernel Modules... |
| [ 615.734805] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 615.739793] systemd[1]: Starting udev Coldplug all Devices... |
| [ 615.745511] systemd[1]: Mounted Huge Pages File System. |
| [ 615.748112] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 615.751416] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| [ 615.755193] systemd[1]: Mounted Kernel Debug File System. |
| [ 615.757966] systemd[1]: Mounted Kernel Trace File System. |
| [ 615.761877] systemd[1]: Finished Availability of block devices. |
| [ 615.765479] systemd[1]: Finished Set the console keyboard layout. |
| [ 615.769048] systemd[1]: Finished Create list of static device nodes for the current kernel. |
| [ 615.773910] systemd[1]: Finished Remount Root and Kernel File Systems. |
| [ 615.778268] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. |
| [ 615.778320] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. |
| [ 615.779460] systemd[1]: Starting Load/Save Random Seed... |
| [ 615.785521] systemd[1]: Starting Create System Users... |
| [ 615.818689] systemd[1]: Finished Load/Save Random Seed. |
| [ 615.823095] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. |
| [ 615.828433] systemd[1]: Finished Create System Users. |
| [ 615.830744] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 615.855482] systemd[1]: Finished Create Static Device Nodes in /dev. |
| [ 615.857123] systemd[1]: Reached target Local File Systems (Pre). |
| [ 615.859865] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped. |
| [ 615.859884] systemd[1]: Reached target Containers. |
| [ 615.866919] systemd[1]: Starting udev Kernel Device Manager... |
| [ 615.870480] systemd[1]: Finished udev Coldplug all Devices. |
| [ 615.874597] systemd[1]: Starting Helper to synchronize boot up for ifupdown... |
| [ 615.884780] systemd[1]: Finished Helper to synchronize boot up for ifupdown. |
| [ 615.945145] loop: module loaded |
| [ 615.959357] lp: driver loaded but no devices found |
| [ 615.964230] ppdev: user-space parallel port driver |
| [ 615.974351] systemd[1]: Finished Load Kernel Modules. |
| [ 615.976006] systemd[1]: Condition check resulted in FUSE Control File System being skipped. |
| [ 615.977565] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. |
| [ 615.979197] systemd[1]: Starting Apply Kernel Variables... |
| [ 615.990101] systemd[1]: Finished Apply Kernel Variables. |
| [ 616.001918] systemd[1]: Started udev Kernel Device Manager. |
| [ 616.005330] systemd[1]: Starting Show Plymouth Boot Screen... |
| [ 616.030511] systemd[1]: Started Show Plymouth Boot Screen. |
| [ 616.032646] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. |
| [ 616.034778] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. |
| [ 616.192663] systemd[1]: Started Journal Service. |
| [ 616.211722] systemd-journald[497]: Received client request to flush runtime journal. |
| [ 616.228381] ACPI: AC Adapter [AC] (on-line) |
| [ 616.283942] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 616.293439] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 616.296986] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 616.300623] sd 2:0:0:0: Attached scsi generic sg2 type 0 |
| [ 616.304986] sd 6:0:0:0: Attached scsi generic sg3 type 0 |
| [ 616.308549] Non-volatile memory driver v1.3 |
| [ 616.337802] input: PC Speaker as /devices/platform/pcspkr/input/input24 |
| [ 616.341751] iTCO_vendor_support: vendor-support=0 |
| [ 616.344018] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 616.345969] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 616.347899] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 616.349812] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 616.354006] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 616.355899] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 616.357801] thinkpad_acpi: ThinkPad BIOS CBET4000 4.11-2314-g1f3055aa36, EC G7HT39WW-3.22 |
| [ 616.359662] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU |
| [ 616.364254] thinkpad_acpi: radio switch found; radios are enabled |
| [ 616.366278] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 616.368337] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 616.370273] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 616.397574] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 616.403654] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| [ 616.413743] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 616.417971] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 616.420770] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 616.457893] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 616.509036] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 616.534461] cfg80211: Loading compiled-in X.509 certificates for regulatory database |
| [ 616.616559] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' |
| [ 616.618463] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 616.618471] battery: new extension: ThinkPad Battery Extension |
| [ 616.656590] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' |
| [ 616.663773] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input25 |
| [ 616.676511] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' |
| [ 616.686427] platform regulatory.0: firmware: direct-loading firmware regulatory.db |
| [ 616.686907] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s |
| [ 616.721915] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 616.758752] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 616.758754] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 616.758756] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 616.758757] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 616.758758] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 616.758759] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 616.758761] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 616.758762] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 616.771554] wl: loading out-of-tree module taints kernel. |
| [ 616.771558] wl: module license 'MIXED/Proprietary' taints kernel. |
| [ 616.771559] Disabling lock debugging due to kernel taint |
| [ 616.773184] wl: module verification failed: signature and/or required key missing - tainting kernel |
| [ 616.849087] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS |
| [ 616.855215] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 |
| [ 616.855284] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27 |
| [ 616.855343] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28 |
| [ 616.855399] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29 |
| [ 616.855457] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30 |
| [ 616.855518] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31 |
| [ 616.855579] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32 |
| [ 616.855646] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33 |
| [ 616.909372] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) |
| |
| [ 617.023819] wl 0000:01:00.0 wlp1s0: renamed from wlan0 |
| [ 617.058198] intel_rapl_common: Found RAPL domain package |
| [ 617.060053] intel_rapl_common: Found RAPL domain core |
| [ 617.061906] intel_rapl_common: Found RAPL domain uncore |
| [ 617.120518] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| [ 617.125805] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| [ 617.127659] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) |
| [ 617.212351] audit: type=1400 audit(1587591388.370:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1156 comm="apparmor_parser" |
| [ 617.214448] audit: type=1400 audit(1587591388.370:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1156 comm="apparmor_parser" |
| [ 617.216151] audit: type=1400 audit(1587591388.370:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1156 comm="apparmor_parser" |
| [ 617.220491] audit: type=1400 audit(1587591388.378:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1154 comm="apparmor_parser" |
| [ 617.222497] audit: type=1400 audit(1587591388.382:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1157 comm="apparmor_parser" |
| [ 617.227278] audit: type=1400 audit(1587591388.386:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unreal" pid=1155 comm="apparmor_parser" |
| [ 617.230959] audit: type=1400 audit(1587591388.390:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1189 comm="apparmor_parser" |
| [ 617.235369] audit: type=1400 audit(1587591388.394:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1192 comm="apparmor_parser" |
| [ 617.240515] audit: type=1400 audit(1587591388.398:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ut99" pid=1194 comm="apparmor_parser" |
| [ 617.242182] audit: type=1400 audit(1587591388.402:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1200 comm="apparmor_parser" |
| [ 617.290295] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 617.589471] Process accounting resumed |
| [ 617.603716] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input34 |
| [ 618.486949] vboxdrv: Found 4 processor cores |
| [ 618.518915] vboxdrv: TSC mode is Invariant, tentative frequency 2893431084 Hz |
| [ 618.520252] vboxdrv: Successfully loaded version 6.1.6 (interface 0x002d0001) |
| [ 618.730881] VBoxNetFlt: Successfully started. |
| [ 618.740554] VBoxNetAdp: Successfully started. |
| [ 619.114407] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| [ 619.121301] mc: Linux media interface: v0.10 |
| [ 619.142729] videodev: Linux video capture interface: v2.00 |
| [ 619.201902] Bluetooth: Core ver 2.22 |
| [ 619.203138] NET: Registered protocol family 31 |
| [ 619.204414] Bluetooth: HCI device and connection manager initialized |
| [ 619.205590] Bluetooth: HCI socket layer initialized |
| [ 619.206791] Bluetooth: L2CAP socket layer initialized |
| [ 619.207881] Bluetooth: SCO socket layer initialized |
| [ 619.231920] usbcore: registered new interface driver btusb |
| [ 619.266535] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 619.283320] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 619.285148] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 619.291694] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 619.293069] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 619.294327] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input35 |
| [ 619.296328] usbcore: registered new interface driver uvcvideo |
| [ 619.297783] USB Video Class driver (1.1.1) |
| [ 619.330507] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 619.331972] Bluetooth: BNEP filters: protocol multicast |
| [ 619.333421] Bluetooth: BNEP socket layer initialized |
| [ 619.343440] Bluetooth: hci0: BCM: chip id 63 |
| [ 619.345436] Bluetooth: hci0: BCM: features 0x07 |
| [ 619.363438] Bluetooth: hci0: TP-T430s |
| [ 619.366446] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 619.371055] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [ 619.720191] fuse: init (API version 7.31) |
| [ 620.227429] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 620.243429] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 620.549111] Bluetooth: RFCOMM TTY layer initialized |
| [ 620.549118] Bluetooth: RFCOMM socket layer initialized |
| [ 620.549123] Bluetooth: RFCOMM ver 1.11 |
| [ 621.246222] usblp 4-1.5.6.1.2:1.0: usblp3: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [ 621.246259] usbcore: registered new interface driver usblp |
| [ 621.308227] usbcore: registered new interface driver usbserial_generic |
| [ 621.309969] usbserial: USB Serial support registered for generic |
| [ 621.316034] usbcore: registered new interface driver pl2303 |
| [ 621.316048] usbserial: USB Serial support registered for pl2303 |
| [ 621.316088] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected |
| [ 621.321007] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [ 622.839537] rfkill: input handler disabled |
| [ 624.178758] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 624.178796] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready |
| [ 628.986908] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 631.993379] rfkill: input handler enabled |
| [ 633.362466] kauditd_printk_skb: 31 callbacks suppressed |
| [ 633.362467] audit: type=1400 audit(1587591404.522:43): apparmor="DENIED" operation="open" profile="/usr/bin/freshclam" name="/run/systemd/userdb/" pid=2934 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [ 633.896132] audit: type=1400 audit(1587591405.054:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3318 comm="apparmor_parser" |
| [ 634.126027] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 634.128197] Bridge firewalling registered |
| [ 634.375862] Initializing XFRM netlink socket |
| [ 635.843808] audit: type=1400 audit(1587591407.002:45): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/telepathy-*" name="/sys/devices/system/node/" pid=3749 comm="telepathy-haze" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 |
| [ 636.345866] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [ 636.663356] rfkill: input handler disabled |
| [ 640.725266] logitech-hidpp-device 0003:046D:1028.0004: HID++ 1.0 device connected. |