[    0.000000] Linux version 5.5.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-10)) #1 SMP Debian 5.5.17-1 (2020-04-15)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.5.0-2-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff28fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff29000-0x00000000829fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.11-2314-g1f3055aa36 04/22/2020
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2893.491 MHz processor
[    0.002030] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002032] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002035] last_pfn = 0x47b600 max_arch_pfn = 0x400000000
[    0.002039] MTRR default type: write-back
[    0.002040] MTRR fixed ranges enabled:
[    0.002041]   00000-9FFFF write-back
[    0.002042]   A0000-BFFFF uncachable
[    0.002043]   C0000-FFFFF write-back
[    0.002043] MTRR variable ranges enabled:
[    0.002044]   0 base 080000000 mask FC0000000 uncachable
[    0.002045]   1 base 0C0000000 mask FF0000000 uncachable
[    0.002046]   2 base 0D0000000 mask FF0000000 write-combining
[    0.002047]   3 base 0E0000000 mask FE0000000 uncachable
[    0.002047]   4 disabled
[    0.002048]   5 disabled
[    0.002048]   6 disabled
[    0.002048]   7 disabled
[    0.002049]   8 disabled
[    0.002049]   9 disabled
[    0.002317] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002660] last_pfn = 0x7ff29 max_arch_pfn = 0x400000000
[    0.012000] BRK [0x1e6c01000, 0x1e6c01fff] PGTABLE
[    0.012002] BRK [0x1e6c02000, 0x1e6c02fff] PGTABLE
[    0.012003] BRK [0x1e6c03000, 0x1e6c03fff] PGTABLE
[    0.012034] BRK [0x1e6c04000, 0x1e6c04fff] PGTABLE
[    0.012035] BRK [0x1e6c05000, 0x1e6c05fff] PGTABLE
[    0.012136] BRK [0x1e6c06000, 0x1e6c06fff] PGTABLE
[    0.012163] BRK [0x1e6c07000, 0x1e6c07fff] PGTABLE
[    0.012356] RAMDISK: [mem 0x308d1000-0x3445ffff]
[    0.012362] ACPI: Early table checksum verification disabled
[    0.012365] ACPI: RSDP 0x00000000000F67B0 000024 (v02 COREv4)
[    0.012368] ACPI: XSDT 0x000000007FF4F0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[    0.012373] ACPI: FACP 0x000000007FF52CC0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200110)
[    0.012377] ACPI: DSDT 0x000000007FF4F280 003A39 (v02 COREv4 COREBOOT 20110725 INTL 20200110)
[    0.012380] ACPI: FACS 0x000000007FF4F240 000040
[    0.012383] ACPI: FACS 0x000000007FF4F240 000040
[    0.012385] ACPI: SSDT 0x000000007FF52DE0 001AC5 (v02 COREv4 COREBOOT 0000002A CORE 20200110)
[    0.012387] ACPI: MCFG 0x000000007FF548B0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[    0.012390] ACPI: TCPA 0x000000007FF548F0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20200110)
[    0.012393] ACPI: APIC 0x000000007FF54930 00006C (v03 COREv4 COREBOOT 00000000 CORE 20200110)
[    0.012395] ACPI: DMAR 0x000000007FF549A0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[    0.012398] ACPI: HPET 0x000000007FF56A70 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[    0.012404] ACPI: Local APIC address 0xfee00000
[    0.012476] No NUMA configuration found
[    0.012477] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff]
[    0.012480] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff]
[    0.012509] Zone ranges:
[    0.012510]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012511]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.012512]   Normal   [mem 0x0000000100000000-0x000000047b5fffff]
[    0.012513]   Device   empty
[    0.012514] Movable zone start for each node
[    0.012515] Early memory node ranges
[    0.012515]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.012517]   node   0: [mem 0x0000000000100000-0x000000007ff28fff]
[    0.012518]   node   0: [mem 0x0000000100000000-0x000000047b5fffff]
[    0.012678] Zeroed struct page in unavailable ranges: 19257 pages
[    0.012679] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff]
[    0.012681] On node 0 totalpages: 4175047
[    0.012682]   DMA zone: 64 pages used for memmap
[    0.012682]   DMA zone: 21 pages reserved
[    0.012683]   DMA zone: 3998 pages, LIFO batch:0
[    0.012747]   DMA32 zone: 8125 pages used for memmap
[    0.012748]   DMA32 zone: 519977 pages, LIFO batch:63
[    0.023317]   Normal zone: 57048 pages used for memmap
[    0.023318]   Normal zone: 3651072 pages, LIFO batch:63
[    0.023868] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[    0.024249] ACPI: PM-Timer IO Port: 0x508
[    0.024251] ACPI: Local APIC address 0xfee00000
[    0.024267] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.024269] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.024270] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.024272] ACPI: IRQ0 used by override.
[    0.024272] ACPI: IRQ9 used by override.
[    0.024274] Using ACPI (MADT) for SMP configuration information
[    0.024276] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.024279] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.024290] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.024291] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.024292] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.024293] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.024294] PM: Registered nosave memory: [mem 0x7ff29000-0x829fffff]
[    0.024295] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[    0.024295] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.024296] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[    0.024297] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.024298] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.024298] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.024299] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.024301] [mem 0x82a00000-0xefffffff] available for PCI devices
[    0.024302] Booting paravirtualized kernel on bare hardware
[    0.024304] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.112679] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.112859] percpu: Embedded 55 pages/cpu s187800 r8192 d29288 u524288
[    0.112865] pcpu-alloc: s187800 r8192 d29288 u524288 alloc=1*2097152
[    0.112866] pcpu-alloc: [0] 0 1 2 3 
[    0.112884] Built 1 zonelists, mobility grouping on.  Total pages: 4109789
[    0.112885] Policy zone: Normal
[    0.112887] Kernel command line: BOOT_IMAGE=/vmlinuz-5.5.0-2-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
[    0.113670] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.114044] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.114092] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.126855] Memory: 2100364K/16700188K available (10243K kernel code, 1221K rwdata, 3972K rodata, 1672K init, 1980K bss, 439364K reserved, 0K cma-reserved)
[    0.126861] random: get_random_u64 called from __kmem_cache_create+0x3e/0x530 with crng_init=0
[    0.126955] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.126966] Kernel/User page tables isolation: enabled
[    0.126979] ftrace: allocating 34294 entries in 134 pages
[    0.138603] ftrace: allocated 134 pages with 3 groups
[    0.138669] rcu: Hierarchical RCU implementation.
[    0.138670] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.138672] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.138672] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.141335] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[    0.141542] random: crng done (trusting CPU's manufacturer)
[    0.143078] Console: colour VGA+ 80x25
[    0.148594] printk: console [tty0] enabled
[    0.148657] ACPI: Core revision 20191018
[    0.148772] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.148854] APIC: Switch to symmetric I/O mode setup
[    0.148908] DMAR: Host address width 36
[    0.148962] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.149020] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.149089] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
[    0.149147] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.149202] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.149268] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.149327] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.149382] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.149830] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.149886] x2apic enabled
[    0.149943] Switched APIC routing to cluster x2apic.
[    0.150425] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.168855] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b53e5e924, max_idle_ns: 440795311399 ns
[    0.168929] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.98 BogoMIPS (lpj=11573964)
[    0.169002] pid_max: default: 32768 minimum: 301
[    0.169081] LSM: Security Framework initializing
[    0.169141] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.169215] AppArmor: AppArmor initialized
[    0.169268] TOMOYO Linux initialized
[    0.169356] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.169449] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.169728] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.169791] process: using mwait in idle threads
[    0.169847] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.169902] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.169960] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.170027] Spectre V2 : Mitigation: Full generic retpoline
[    0.170082] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.170148] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.170206] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.170273] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.170329] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.170400] MDS: Mitigation: Clear CPU buffers
[    0.170606] Freeing SMP alternatives memory: 32K
[    0.172253] TSC deadline timer enabled
[    0.172256] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.172425] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.172501] ... version:                3
[    0.172554] ... bit width:              48
[    0.172607] ... generic registers:      4
[    0.172661] ... value mask:             0000ffffffffffff
[    0.172715] ... max period:             00007fffffffffff
[    0.172769] ... fixed-purpose events:   3
[    0.172823] ... event mask:             000000070000000f
[    0.172907] rcu: Hierarchical SRCU implementation.
[    0.172927] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.172927] smp: Bringing up secondary CPUs ...
[    0.172927] x86: Booting SMP configuration:
[    0.172927] .... node  #0, CPUs:      #1
[    0.173005] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.173174]  #2 #3
[    0.179058] smp: Brought up 1 node, 4 CPUs
[    0.179058] smpboot: Max logical packages: 1
[    0.179058] smpboot: Total of 4 processors activated (23147.92 BogoMIPS)
[    0.224939] node 0 initialised, 3540115 pages in 48ms
[    0.225263] devtmpfs: initialized
[    0.225263] x86/mm: Memory block size: 128MB
[    0.226431] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.228934] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.229043] pinctrl core: initialized pinctrl subsystem
[    0.229161] thermal_sys: Registered thermal governor 'fair_share'
[    0.229162] thermal_sys: Registered thermal governor 'bang_bang'
[    0.229217] thermal_sys: Registered thermal governor 'step_wise'
[    0.229273] thermal_sys: Registered thermal governor 'user_space'
[    0.229400] NET: Registered protocol family 16
[    0.230848] audit: initializing netlink subsys (disabled)
[    0.230908] audit: type=2000 audit(1587590771.080:1): state=initialized audit_enabled=0 res=1
[    0.230908] cpuidle: using governor ladder
[    0.230908] cpuidle: using governor menu
[    0.230908] ACPI: bus type PCI registered
[    0.230908] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.230908] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.230908] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.230908] PCI: Using configuration type 1 for base access
[    0.230908] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.233042] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.381009] ACPI: Added _OSI(Module Device)
[    0.381065] ACPI: Added _OSI(Processor Device)
[    0.381119] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.381173] ACPI: Added _OSI(Processor Aggregator Device)
[    0.381227] ACPI: Added _OSI(Linux-Dell-Video)
[    0.381283] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.381337] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.381857] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.382583] ACPI: EC: EC started
[    0.382636] ACPI: EC: interrupt blocked
[    0.382945] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.383001] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.383069] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[    0.383137] ACPI: Interpreter enabled
[    0.383204] ACPI: (supports S0 S3 S4 S5)
[    0.383259] ACPI: Using IOAPIC for interrupt routing
[    0.383327] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.383508] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.387945] ACPI: Power Resource [FPWR] (off)
[    0.388225] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.388284] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.388284] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.388284] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.388284] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[    0.388284] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff])
[    0.388284] PCI host bridge to bus 0000:00
[    0.388284] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.388284] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[    0.388284] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.388284] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.388284] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.388284] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.388284] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit]
[    0.388284] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.388284] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.388284] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[    0.388284] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit]
[    0.388284] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.388284] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit]
[    0.388284] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.388284] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.388284] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff]
[    0.388284] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff]
[    0.388284] pci 0000:00:19.0: reg 0x18: [io  0x4040-0x405f]
[    0.388284] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.388284] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.388284] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff]
[    0.388284] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.388386] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.388462] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit]
[    0.388588] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.388721] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
[    0.388930] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.389018] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    0.389073] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    0.389214] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
[    0.389443] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.389529] pci 0000:00:1c.1: Enabling MPC IRBNCE
[    0.389587] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[    0.389724] pci 0000:00:1c.2: [8086:1e18] type 01 class 0x060400
[    0.389953] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.390040] pci 0000:00:1c.2: Enabling MPC IRBNCE
[    0.390095] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[    0.390231] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.390305] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b40000-0xe2b403ff]
[    0.390440] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.390569] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.390787] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.390861] pci 0000:00:1f.2: reg 0x10: [io  0x4080-0x4087]
[    0.390923] pci 0000:00:1f.2: reg 0x14: [io  0x4090-0x4093]
[    0.390981] pci 0000:00:1f.2: reg 0x18: [io  0x4088-0x408f]
[    0.391042] pci 0000:00:1f.2: reg 0x1c: [io  0x4094-0x4097]
[    0.391104] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.391165] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3e000-0xe2b3e7ff]
[    0.391260] pci 0000:00:1f.2: PME# supported from D3hot
[    0.391377] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.391448] pci 0000:00:1f.3: reg 0x10: [mem 0xe2b41000-0xe2b410ff 64bit]
[    0.391524] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.391658] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[    0.391737] pci 0000:00:1f.6: reg 0x10: [mem 0xe2b3d000-0xe2b3dfff 64bit]
[    0.392012] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000
[    0.392160] pci 0000:01:00.0: reg 0x10: [mem 0xe2a00000-0xe2a07fff 64bit]
[    0.392278] pci 0000:01:00.0: reg 0x18: [mem 0xe2800000-0xe29fffff 64bit]
[    0.392580] pci 0000:01:00.0: supports D1 D2
[    0.392634] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.392990] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.393053] pci 0000:00:1c.0:   bridge window [mem 0xe2800000-0xe2afffff]
[    0.393421] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500
[    0.393714] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[    0.394016] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff]
[    0.394589] pci 0000:02:00.0: supports D1 D2
[    0.394641] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.395290] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.395345] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.395405] pci 0000:00:1c.1:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.395467] pci 0000:00:1c.1:   bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.395604] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.395661] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.395722] pci 0000:00:1c.2:   bridge window [mem 0xe1c00000-0xe23fffff]
[    0.395787] pci 0000:00:1c.2:   bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
[    0.395999] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.396095] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.396187] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.396278] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.396369] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.396460] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.396552] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.396642] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.400940] ACPI: EC: interrupt unblocked
[    0.400940] ACPI: EC: event unblocked
[    0.400940] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, IRQ=-1, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.400940] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[    0.400940] iommu: Default domain type: Translated 
[    0.400941] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.400991] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.401062] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.401117] vgaarb: loaded
[    0.401225] EDAC MC: Ver: 3.0.0
[    0.401407] PCI: Using ACPI for IRQ routing
[    0.401905] PCI: pci_cache_line_size set to 64 bytes
[    0.402432] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.402433] e820: reserve RAM buffer [mem 0x7ff29000-0x7fffffff]
[    0.402434] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff]
[    0.403027] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.403086] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.404985] clocksource: Switched to clocksource tsc-early
[    0.414034] VFS: Disk quotas dquot_6.6.0
[    0.414103] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.414254] AppArmor: AppArmor Filesystem Enabled
[    0.415592] pnp: PnP ACPI init
[    0.415797] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.415856] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.415912] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.415970] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.416030] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.416088] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.416146] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.416202] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.416260] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.416318] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.416380] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.416755] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.416817] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.416845] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.416902] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.416967] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.416984] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.417009] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.417028] pnp 00:05: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[    0.417048] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.417069] pnp: PnP ACPI: found 7 devices
[    0.422611] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.422713] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.422774] pci 0000:00:1c.0:   bridge window [mem 0xe2800000-0xe2afffff]
[    0.422842] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.422898] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.422958] pci 0000:00:1c.1:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.423018] pci 0000:00:1c.1:   bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.423089] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.423145] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.423205] pci 0000:00:1c.2:   bridge window [mem 0xe1c00000-0xe23fffff]
[    0.423265] pci 0000:00:1c.2:   bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
[    0.423340] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.423397] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.423455] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.423513] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.423569] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.423626] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.423682] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window]
[    0.423740] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window]
[    0.423797] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window]
[    0.423854] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window]
[    0.423911] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window]
[    0.423969] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window]
[    0.424027] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window]
[    0.424084] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window]
[    0.424142] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window]
[    0.424200] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window]
[    0.424258] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe2afffff]
[    0.424315] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.424368] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff]
[    0.424426] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.424494] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.424550] pci_bus 0000:03: resource 1 [mem 0xe1c00000-0xe23fffff]
[    0.424608] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref]
[    0.424735] NET: Registered protocol family 2
[    0.424890] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.424979] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.425190] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.425353] TCP: Hash tables configured (established 131072 bind 65536)
[    0.425430] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.425515] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.425657] NET: Registered protocol family 1
[    0.425714] NET: Registered protocol family 44
[    0.425775] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.426577] PCI: CLS 64 bytes, default 64
[    0.426669] Trying to unpack rootfs image as initramfs...
[    1.187215] Freeing initrd memory: 60988K
[    1.187318] DMAR: No ATSR found
[    1.187400] DMAR: dmar0: Using Queued invalidation
[    1.187461] DMAR: dmar1: Using Queued invalidation
[    1.255635] pci 0000:00:00.0: Adding to iommu group 0
[    1.258479] pci 0000:00:02.0: Adding to iommu group 1
[    1.258550] pci 0000:00:02.0: Using iommu direct mapping
[    1.258635] pci 0000:00:04.0: Adding to iommu group 2
[    1.258726] pci 0000:00:14.0: Adding to iommu group 3
[    1.258813] pci 0000:00:19.0: Adding to iommu group 4
[    1.258907] pci 0000:00:1a.0: Adding to iommu group 5
[    1.258995] pci 0000:00:1b.0: Adding to iommu group 6
[    1.259087] pci 0000:00:1c.0: Adding to iommu group 7
[    1.259178] pci 0000:00:1c.1: Adding to iommu group 8
[    1.259262] pci 0000:00:1c.2: Adding to iommu group 9
[    1.259352] pci 0000:00:1d.0: Adding to iommu group 10
[    1.260745] pci 0000:00:1f.0: Adding to iommu group 11
[    1.260811] pci 0000:00:1f.2: Adding to iommu group 11
[    1.260878] pci 0000:00:1f.3: Adding to iommu group 11
[    1.260949] pci 0000:00:1f.6: Adding to iommu group 11
[    1.261045] pci 0000:01:00.0: Adding to iommu group 12
[    1.261135] pci 0000:02:00.0: Adding to iommu group 13
[    1.261196] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    1.263261] Initialise system trusted keyrings
[    1.263324] Key type blacklist registered
[    1.263421] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    1.264473] zbud: loaded
[    1.264663] Platform Keyring initialized
[    1.264721] Key type asymmetric registered
[    1.264778] Asymmetric key parser 'x509' registered
[    1.264841] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.264953] io scheduler mq-deadline registered
[    1.265248] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
[    1.265511] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27
[    1.265595] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.265917] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28
[    1.266001] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.266217] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.266287] intel_idle: MWAIT substates: 0x21120
[    1.266287] intel_idle: v0.4.1 model 0x3A
[    1.266431] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.267717] thermal LNXTHERM:00: registered as thermal_zone0
[    1.267777] ACPI: Thermal Zone [THM0] (62 C)
[    1.268585] thermal LNXTHERM:01: registered as thermal_zone1
[    1.268644] ACPI: Thermal Zone [THM1] (27 C)
[    1.268766] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.269183] Linux agpgart interface v0.103
[    1.269283] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.269343] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    1.269609] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.271356] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.271417] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.271555] mousedev: PS/2 mouse device common for all mice
[    1.271646] rtc_cmos 00:03: RTC can wake from S4
[    1.271872] rtc_cmos 00:03: registered as rtc0
[    1.271944] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.272033] intel_pstate: Intel P-state driver initializing
[    1.272247] ledtrig-cpu: registered to indicate activity on CPUs
[    1.272500] drop_monitor: Initializing network drop monitor service
[    1.272906] NET: Registered protocol family 10
[    1.273062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.291783] Segment Routing with IPv6
[    1.291880] mip6: Mobile IPv6
[    1.291941] NET: Registered protocol family 17
[    1.292068] mpls_gso: MPLS GSO support
[    1.292700] microcode: sig=0x306a9, pf=0x10, revision=0x21
[    1.292795] microcode: Microcode Update Driver: v2.2.
[    1.292800] IPI shorthand broadcast: enabled
[    1.292969] sched_clock: Marking stable (1285522404, 7411526)->(1298995960, -6062030)
[    1.293393] registered taskstats version 1
[    1.293464] Loading compiled-in X.509 certificates
[    1.333394] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.333510] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[    1.333609] zswap: loaded using pool lzo/zbud
[    1.333803] Key type ._fscrypt registered
[    1.333863] Key type .fscrypt registered
[    1.333942] AppArmor: AppArmor sha1 policy hashing enabled
[    1.334370] rtc_cmos 00:03: setting system clock to 2020-04-22T21:26:12 UTC (1587590772)
[    1.335836] Freeing unused kernel image (initmem) memory: 1672K
[    1.360968] Write protecting the kernel read-only data: 16384k
[    1.361885] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    1.362142] Freeing unused kernel image (rodata/data gap) memory: 124K
[    1.373684] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.373745] x86/mm: Checking user space page tables
[    1.381025] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.381084] Run /init as init process
[    1.487971] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/PNP0C09:00/PNP0C0E:00/input/input2
[    1.488098] ACPI: Sleep Button [SLPB]
[    1.488208] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/PNP0C09:00/PNP0C0D:00/input/input3
[    1.488315] ACPI: Lid Switch [LID]
[    1.488424] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.488528] ACPI: Power Button [PWRF]
[    1.504446] pps_core: LinuxPPS API ver. 1 registered
[    1.504506] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.505947] PTP clock support registered
[    1.523604] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.523664] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.525023] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.530431] ACPI: bus type USB registered
[    1.530507] usbcore: registered new interface driver usbfs
[    1.530570] usbcore: registered new interface driver hub
[    1.530649] usbcore: registered new device driver usb
[    1.538143] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.539041] ehci-pci: EHCI PCI platform driver
[    1.539194] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20191018/utaddress-204)
[    1.539236] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.539291] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.539354] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.539367] ehci-pci 0000:00:1a.0: debug port 2
[    1.539658] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20191018/utaddress-204)
[    1.539793] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.539898] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20191018/utaddress-204)
[    1.540036] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.540141] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20191018/utaddress-204)
[    1.540278] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.540382] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.542139] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.543296] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.543409] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3f000
[    1.548908] battery: ACPI: Battery Slot [BAT0] (battery present)
[    1.549134] battery: ACPI: Battery Slot [BAT1] (battery absent)
[    1.549500] sdhci: Secure Digital Host Controller Interface driver
[    1.549560] sdhci: Copyright(c) Pierre Ossman
[    1.556810] SCSI subsystem initialized
[    1.557048] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.557172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[    1.557243] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.557313] usb usb1: Product: EHCI Host Controller
[    1.557370] usb usb1: Manufacturer: Linux 5.5.0-2-amd64 ehci_hcd
[    1.557430] usb usb1: SerialNumber: 0000:00:1a.0
[    1.557818] cryptd: max_cpu_qlen set to 1000
[    1.563714] hub 1-0:1.0: USB hub found
[    1.563779] hub 1-0:1.0: 3 ports detected
[    1.564133] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.564202] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.564605] AVX version of gcm_enc/dec engaged.
[    1.564662] AES CTR mode by8 optimization enabled
[    1.565358] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[    1.565441] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.565661] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[    1.565733] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.565803] usb usb2: Product: xHCI Host Controller
[    1.565861] usb usb2: Manufacturer: Linux 5.5.0-2-amd64 xhci-hcd
[    1.565919] usb usb2: SerialNumber: 0000:00:14.0
[    1.568887] hub 2-0:1.0: USB hub found
[    1.569083] hub 2-0:1.0: 4 ports detected
[    1.569333] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.569396] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.569472] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.569550] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.569666] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05
[    1.569740] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.569814] usb usb3: Product: xHCI Host Controller
[    1.569878] usb usb3: Manufacturer: Linux 5.5.0-2-amd64 xhci-hcd
[    1.569939] usb usb3: SerialNumber: 0000:00:14.0
[    1.574334] hub 3-0:1.0: USB hub found
[    1.574408] hub 3-0:1.0: 4 ports detected
[    1.574732] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.574815] ehci-pci 0000:00:1d.0: debug port 2
[    1.578791] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.578949] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b40000
[    1.587901] libata version 3.00 loaded.
[    1.592949] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.592969] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
[    1.593475] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.593745] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    1.603131] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[    1.603212] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.603283] usb usb4: Product: EHCI Host Controller
[    1.603341] usb usb4: Manufacturer: Linux 5.5.0-2-amd64 ehci_hcd
[    1.603402] usb usb4: SerialNumber: 0000:00:1d.0
[    1.603604] hub 4-0:1.0: USB hub found
[    1.603674] hub 4-0:1.0: 3 ports detected
[    1.613323] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.614670] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[    1.629749] ahci 0000:00:1f.2: version 3.0
[    1.629914] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.640068] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[    1.640142] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.640885] scsi host0: ahci
[    1.642991] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.643269] scsi host1: ahci
[    1.643399] scsi host2: ahci
[    1.643524] scsi host3: ahci
[    1.643649] scsi host4: ahci
[    1.643768] scsi host5: ahci
[    1.643855] ata1: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e100 irq 31
[    1.643925] ata2: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e180 irq 31
[    1.643994] ata3: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e200 irq 31
[    1.644062] ata4: DUMMY
[    1.644116] ata5: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e300 irq 31
[    1.644183] ata6: DUMMY
[    1.692030] i915 0000:00:02.0: VT-d active for gfx access
[    1.692092] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.692999] Console: switching to colour dummy device 80x25
[    1.693058] i915 0000:00:02.0: DMAR active, disabling use of stolen memory
[    1.743582] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.743592] [drm] Driver supports precise vblank timestamp query.
[    1.744111] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.744734] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66
[    1.744740] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.744780] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.745962] e1000e 0000:00:19.0 eno0: renamed from eth0
[    1.801420] [drm] Initialized i915 1.6.0 20191101 for 0000:00:02.0 on minor 0
[    1.801647] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.826475] acpi device:30: registered as cooling_device5
[    1.826591] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.830527] mmc0: new SD card at address 19b3
[    1.836342] mmcblk0: mmc0:19b3 SR01G 945 MiB 
[    1.838227]  mmcblk0: p1
[    1.904978] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.936994] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.941431] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.941435] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.941681] hub 1-1:1.0: USB hub found
[    1.941772] hub 1-1:1.0: 6 ports detected
[    1.959603] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.960611] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133
[    1.960620] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    1.960774] ata1.00: configured for UDMA/133
[    1.960996] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SKC400S 001B PQ: 0 ANSI: 5
[    1.973589] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.973600] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.974193] hub 4-1:1.0: USB hub found
[    1.974301] hub 4-1:1.0: 8 ports detected
[    2.131640] fbcon: i915drmfb (fb0) is primary device
[    2.229019] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    2.252810] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[    2.260988] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
[    2.276158] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.290118] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[    2.290122] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.290643] hub 4-1.5:1.0: USB hub found
[    2.290827] hub 4-1.5:1.0: 6 ports detected
[    2.293153] tsc: Refined TSC clocksource calibration: 2893.432 MHz
[    2.293165] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b506bc3f7, max_idle_ns: 440795308319 ns
[    2.293189] clocksource: Switched to clocksource tsc
[    2.313631] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
[    2.313633] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.314866] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[    2.314875] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.338991] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[    2.338994] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.338997] usb 1-1.3: Product: Biometric Coprocessor
[    2.338999] usb 1-1.3: Manufacturer: Auth
[    2.354439] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.363491] ata2.00: configured for UDMA/133
[    2.372999] scsi 1:0:0:0: Direct-Access     ATA      ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
[    2.416980] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    2.529768] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[    2.529771] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.529773] usb 1-1.4: Product: BCM20702A0
[    2.529775] usb 1-1.4: Manufacturer: Broadcom Corp
[    2.529777] usb 1-1.4: SerialNumber: B8763FA9D32E
[    2.581027] usb 4-1.5.1: new full-speed USB device number 4 using ehci-pci
[    2.609024] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[    2.649471] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
[    2.649475] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.649477] usb 1-1.6: Product: Integrated Camera
[    2.649479] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[    2.688092] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.688532] ata3.00: supports DRM functions and may not be fully accessible
[    2.688678] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RR, max UDMA/133
[    2.688680] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    2.689498] ata3.00: Trusted Computing capability qword not valid!
[    2.689993] ata3.00: supports DRM functions and may not be fully accessible
[    2.690936] ata3.00: Trusted Computing capability qword not valid!
[    2.690943] ata3.00: configured for UDMA/133
[    2.691392] scsi 2:0:0:0: Direct-Access     ATA      KINGSTON SUV500M 56RR PQ: 0 ANSI: 5
[    2.697838] usb 4-1.5.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10
[    2.697841] usb 4-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.697843] usb 4-1.5.1: Product: USB Receiver
[    2.697845] usb 4-1.5.1: Manufacturer: Logitech
[    2.710999] hid: raw HID events driver (C) Jiri Kosina
[    2.722563] usbcore: registered new interface driver usbhid
[    2.722564] usbhid: USB HID core driver
[    2.724704] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.0/0003:046D:C52B.0001/input/input8
[    2.742097] usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    2.777039] usb 4-1.5.3: new high-speed USB device number 5 using ehci-pci
[    2.781512] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input0
[    2.782089] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input9
[    2.782280] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input10
[    2.806103] usb 4-1.5.3: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[    2.806107] usb 4-1.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.806853] hub 4-1.5.3:1.0: USB hub found
[    2.808856] hub 4-1.5.3:1.0: 3 ports detected
[    2.841142] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input11
[    2.841550] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input1
[    2.842406] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2
[    2.886363] usb 3-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21
[    2.886366] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.886369] usb 3-3: Product: USB3.0 Hub             
[    2.886370] usb 3-3: Manufacturer: VIA Labs, Inc.         
[    2.888970] usb 4-1.5.6: new high-speed USB device number 6 using ehci-pci
[    2.889418] hub 3-3:1.0: USB hub found
[    2.889645] hub 3-3:1.0: 4 ports detected
[    2.903908] Console: switching to colour frame buffer device 240x67
[    2.918110] usb 4-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[    2.918113] usb 4-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.918620] hub 4-1.5.6:1.0: USB hub found
[    2.918840] hub 4-1.5.6:1.0: 4 ports detected
[    2.988954] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    2.995893] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.001950] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2
[    3.008813] ata5: SATA link down (SStatus 0 SControl 300)
[    3.012972] usb 2-3: new high-speed USB device number 3 using xhci_hcd
[    3.026796] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[    3.026852] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    3.029069] sd 0:0:0:0: [sda] Write Protect is off
[    3.031056] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[    3.032984] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    3.032986] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    3.032997] sd 1:0:0:0: [sdb] Write Protect is off
[    3.032999] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.033014] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.033605] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.033629] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.035707] sd 2:0:0:0: [sdc] Write Protect is off
[    3.038941] usb 2-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21
[    3.039436] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    3.040657] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.042716] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.044092] usb 2-3: Product: USB2.0 Hub             
[    3.044092] usb 2-3: Manufacturer: VIA Labs, Inc.         
[    3.044718] hub 2-3:1.0: USB hub found
[    3.055126] hub 2-3:1.0: 4 ports detected
[    3.058384]  sda: sda1 sda2 < sda5 >
[    3.059795]  sdb: sdb1
[    3.060132] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.061727] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.069562]  sdc: sdc1 sdc2 sdc3
[    3.071591] sd 2:0:0:0: [sdc] Attached SCSI disk
[    3.100939] usb 4-1.5.3.3: new full-speed USB device number 7 using ehci-pci
[    3.130723] input: Logitech Unifying Device. Wireless PID:1028 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input13
[    3.132987] hid-generic 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:1d.0-1.5.1/input2:1
[    3.169013] usb 3-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    3.172156] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input17
[    3.175973] logitech-hidpp-device 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.5.1/input2:1
[    3.189705] usb 3-2: New USB device found, idVendor=1f75, idProduct=0916, bcdDevice= 0.0d
[    3.191931] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.193826] usb 3-2: Product: Intenso Speed Line
[    3.195398] usb 3-2: Manufacturer: Innostor Technology
[    3.196968] usb 3-2: SerialNumber: 13090900002035
[    3.203854] usb-storage 3-2:1.0: USB Mass Storage device detected
[    3.205770] scsi host6: usb-storage 3-2:1.0
[    3.207344] usbcore: registered new interface driver usb-storage
[    3.210134] usbcore: registered new interface driver uas
[    3.231702] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[    3.436934] raid6: sse2x4   gen() 14252 MB/s
[    3.444943] usb 4-1.5.2: new full-speed USB device number 8 using ehci-pci
[    3.504931] raid6: sse2x4   xor() 10198 MB/s
[    3.556237] usb 4-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03
[    3.558231] usb 4-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.564492] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.0/0003:04B4:4042.0005/input/input18
[    3.572934] raid6: sse2x2   gen() 10128 MB/s
[    3.625893] hid-generic 0003:04B4:4042.0005: input,hidraw2: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0
[    3.632702] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input19
[    3.634495] usb 4-1.5.6.1: new high-speed USB device number 9 using ehci-pci
[    3.635989] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input20
[    3.640934] raid6: sse2x2   xor()  6712 MB/s
[    3.665946] usb 4-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[    3.667414] usb 4-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.669266] hub 4-1.5.6.1:1.0: USB hub found
[    3.671298] hub 4-1.5.6.1:1.0: 4 ports detected
[    3.696980] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input21
[    3.698576] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input22
[    3.700155] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input23
[    3.701798] hid-generic 0003:04B4:4042.0006: input,hiddev1,hidraw3: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1
[    3.708940] raid6: sse2x1   gen() 10330 MB/s
[    3.761441] usb 4-1.5.3.3: New USB device found, idVendor=056d, idProduct=0002, bcdDevice=75.30
[    3.763013] usb 4-1.5.3.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[    3.764580] usb 4-1.5.3.3: Product: EIZO USB HID Monitor
[    3.766145] usb 4-1.5.3.3: Manufacturer: EIZO
[    3.776931] raid6: sse2x1   xor()  7553 MB/s
[    3.778529] raid6: using algorithm sse2x4 gen() 14252 MB/s
[    3.780041] raid6: .... xor() 10198 MB/s, rmw enabled
[    3.781546] raid6: using ssse3x2 recovery algorithm
[    3.783852] xor: automatically using best checksumming function   avx       
[    3.786749] async_tx: api initialized (async)
[    3.965072] usb 4-1.5.6.1.2: new full-speed USB device number 10 using ehci-pci
[    4.036110] device-mapper: uevent: version 1.0.3
[    4.037802] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    4.072722] hid-generic 0003:056D:0002.0007: hiddev2,hidraw4: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:1d.0-1.5.3.3/input0
[    4.083477] usb 4-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02
[    4.085268] usb 4-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.086984] usb 4-1.5.6.1.2: Product: IEEE-1284 Controller
[    4.088701] usb 4-1.5.6.1.2: Manufacturer: Prolific Technology Inc.
[    4.169055] usb 4-1.5.6.1.3: new full-speed USB device number 11 using ehci-pci
[    4.213524] scsi 6:0:0:0: Direct-Access     Intenso  Speed Line       1.00 PQ: 0 ANSI: 6
[    4.218337] sd 6:0:0:0: [sdd] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB)
[    4.223316] sd 6:0:0:0: [sdd] Write Protect is off
[    4.225649] sd 6:0:0:0: [sdd] Mode Sense: 03 00 00 00
[    4.226113] sd 6:0:0:0: [sdd] No Caching mode page found
[    4.228412] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[    4.255117]  sdd: sdd1
[    4.259868] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[    4.282944] usb 4-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00
[    4.286584] usb 4-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.290035] usb 4-1.5.6.1.3: Product: USB-Serial Controller D
[    4.293422] usb 4-1.5.6.1.3: Manufacturer: Prolific Technology Inc. 
[  614.917886] PM: Image not found (code -22)
[  614.923597] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[  614.923600] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[  614.923604] PM: Marking nosave pages: [mem 0x7ff29000-0xffffffff]
[  614.926277] PM: Basic memory bitmaps created
[  614.927196] PM: Basic memory bitmaps freed
[  614.928123] video LNXVIDEO:00: Restoring backlight state
[  615.037144] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[  615.107710] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[  615.288000] systemd[1]: Inserted module 'autofs4'
[  615.317430] systemd[1]: systemd 245.4-4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[  615.337275] systemd[1]: Detected architecture x86-64.
[  615.371076] systemd[1]: Set hostname to <TP-T430s>.
[  615.506349] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[  615.532785] systemd[1]: /lib/systemd/system/thinkfan.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly.
[  615.537097] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[  615.561206] systemd[1]: /lib/systemd/system/fancontrol.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
[  615.564331] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
[  615.602611] systemd[1]: Created slice system-getty.slice.
[  615.604920] systemd[1]: Created slice system-modprobe.slice.
[  615.609918] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  615.618769] systemd[1]: Created slice Cryptsetup Units Slice.
[  615.624483] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[  615.628226] systemd[1]: Created slice system-tor.slice.
[  615.631955] systemd[1]: Created slice User and Session Slice.
[  615.635496] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  615.639364] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  615.643021] systemd[1]: Reached target User and Group Name Lookups.
[  615.646775] systemd[1]: Reached target Remote File Systems.
[  615.648434] systemd[1]: Reached target Slices.
[  615.652331] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[  615.656004] systemd[1]: Listening on LVM2 poll daemon socket.
[  615.660728] systemd[1]: Listening on Syslog Socket.
[  615.663425] systemd[1]: Listening on fsck to fsckd communication Socket.
[  615.667023] systemd[1]: Listening on initctl Compatibility Named Pipe.
[  615.670726] systemd[1]: Listening on Journal Audit Socket.
[  615.674260] systemd[1]: Listening on Journal Socket (/dev/log).
[  615.677850] systemd[1]: Listening on Journal Socket.
[  615.681435] systemd[1]: Listening on udev Control Socket.
[  615.684992] systemd[1]: Listening on udev Kernel Socket.
[  615.689369] systemd[1]: Mounting Huge Pages File System...
[  615.693122] systemd[1]: Mounting POSIX Message Queue File System...
[  615.696886] systemd[1]: Mounting Kernel Debug File System...
[  615.700498] systemd[1]: Mounting Kernel Trace File System...
[  615.704282] systemd[1]: Starting Availability of block devices...
[  615.708009] systemd[1]: Starting Set the console keyboard layout...
[  615.711822] systemd[1]: Starting Create list of static device nodes for the current kernel...
[  615.716269] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[  615.718976] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[  615.719753] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[  615.723261] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[  615.725061] systemd[1]: Starting Journal Service...
[  615.730887] systemd[1]: Starting Load Kernel Modules...
[  615.734805] systemd[1]: Starting Remount Root and Kernel File Systems...
[  615.739793] systemd[1]: Starting udev Coldplug all Devices...
[  615.745511] systemd[1]: Mounted Huge Pages File System.
[  615.748112] systemd[1]: Mounted POSIX Message Queue File System.
[  615.751416] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[  615.755193] systemd[1]: Mounted Kernel Debug File System.
[  615.757966] systemd[1]: Mounted Kernel Trace File System.
[  615.761877] systemd[1]: Finished Availability of block devices.
[  615.765479] systemd[1]: Finished Set the console keyboard layout.
[  615.769048] systemd[1]: Finished Create list of static device nodes for the current kernel.
[  615.773910] systemd[1]: Finished Remount Root and Kernel File Systems.
[  615.778268] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[  615.778320] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[  615.779460] systemd[1]: Starting Load/Save Random Seed...
[  615.785521] systemd[1]: Starting Create System Users...
[  615.818689] systemd[1]: Finished Load/Save Random Seed.
[  615.823095] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[  615.828433] systemd[1]: Finished Create System Users.
[  615.830744] systemd[1]: Starting Create Static Device Nodes in /dev...
[  615.855482] systemd[1]: Finished Create Static Device Nodes in /dev.
[  615.857123] systemd[1]: Reached target Local File Systems (Pre).
[  615.859865] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
[  615.859884] systemd[1]: Reached target Containers.
[  615.866919] systemd[1]: Starting udev Kernel Device Manager...
[  615.870480] systemd[1]: Finished udev Coldplug all Devices.
[  615.874597] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[  615.884780] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[  615.945145] loop: module loaded
[  615.959357] lp: driver loaded but no devices found
[  615.964230] ppdev: user-space parallel port driver
[  615.974351] systemd[1]: Finished Load Kernel Modules.
[  615.976006] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[  615.977565] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[  615.979197] systemd[1]: Starting Apply Kernel Variables...
[  615.990101] systemd[1]: Finished Apply Kernel Variables.
[  616.001918] systemd[1]: Started udev Kernel Device Manager.
[  616.005330] systemd[1]: Starting Show Plymouth Boot Screen...
[  616.030511] systemd[1]: Started Show Plymouth Boot Screen.
[  616.032646] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[  616.034778] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[  616.192663] systemd[1]: Started Journal Service.
[  616.211722] systemd-journald[497]: Received client request to flush runtime journal.
[  616.228381] ACPI: AC Adapter [AC] (on-line)
[  616.283942] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[  616.293439] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  616.296986] sd 1:0:0:0: Attached scsi generic sg1 type 0
[  616.300623] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  616.304986] sd 6:0:0:0: Attached scsi generic sg3 type 0
[  616.308549] Non-volatile memory driver v1.3
[  616.337802] input: PC Speaker as /devices/platform/pcspkr/input/input24
[  616.341751] iTCO_vendor_support: vendor-support=0
[  616.344018] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[  616.345969] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[  616.347899] RAPL PMU: hw unit of domain package 2^-16 Joules
[  616.349812] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[  616.354006] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[  616.355899] thinkpad_acpi: http://ibm-acpi.sf.net/
[  616.357801] thinkpad_acpi: ThinkPad BIOS CBET4000 4.11-2314-g1f3055aa36, EC G7HT39WW-3.22
[  616.359662] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU
[  616.364254] thinkpad_acpi: radio switch found; radios are enabled
[  616.366278] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[  616.368337] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[  616.370273] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[  616.397574] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[  616.403654] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[  616.413743] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[  616.417971] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[  616.420770] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[  616.457893] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[  616.509036] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[  616.534461] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  616.616559] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[  616.618463] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[  616.618471] battery: new extension: ThinkPad Battery Extension
[  616.656590] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[  616.663773] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input25
[  616.676511] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  616.686427] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[  616.686907] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[  616.721915] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[  616.758752] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[  616.758754] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  616.758756] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[  616.758757] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[  616.758758] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[  616.758759] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[  616.758761] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[  616.758762] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[  616.771554] wl: loading out-of-tree module taints kernel.
[  616.771558] wl: module license 'MIXED/Proprietary' taints kernel.
[  616.771559] Disabling lock debugging due to kernel taint
[  616.773184] wl: module verification failed: signature and/or required key missing - tainting kernel
[  616.849087] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1.  Priority:-2 extents:1 across:16699388k SSFS
[  616.855215] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
[  616.855284] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
[  616.855343] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
[  616.855399] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29
[  616.855457] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30
[  616.855518] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31
[  616.855579] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32
[  616.855646] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33
[  616.909372] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)

[  617.023819] wl 0000:01:00.0 wlp1s0: renamed from wlan0
[  617.058198] intel_rapl_common: Found RAPL domain package
[  617.060053] intel_rapl_common: Found RAPL domain core
[  617.061906] intel_rapl_common: Found RAPL domain uncore
[  617.120518] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  617.125805] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[  617.127659] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[  617.212351] audit: type=1400 audit(1587591388.370:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1156 comm="apparmor_parser"
[  617.214448] audit: type=1400 audit(1587591388.370:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1156 comm="apparmor_parser"
[  617.216151] audit: type=1400 audit(1587591388.370:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1156 comm="apparmor_parser"
[  617.220491] audit: type=1400 audit(1587591388.378:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1154 comm="apparmor_parser"
[  617.222497] audit: type=1400 audit(1587591388.382:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1157 comm="apparmor_parser"
[  617.227278] audit: type=1400 audit(1587591388.386:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unreal" pid=1155 comm="apparmor_parser"
[  617.230959] audit: type=1400 audit(1587591388.390:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1189 comm="apparmor_parser"
[  617.235369] audit: type=1400 audit(1587591388.394:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1192 comm="apparmor_parser"
[  617.240515] audit: type=1400 audit(1587591388.398:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ut99" pid=1194 comm="apparmor_parser"
[  617.242182] audit: type=1400 audit(1587591388.402:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1200 comm="apparmor_parser"
[  617.290295] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[  617.589471] Process accounting resumed
[  617.603716] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input34
[  618.486949] vboxdrv: Found 4 processor cores
[  618.518915] vboxdrv: TSC mode is Invariant, tentative frequency 2893431084 Hz
[  618.520252] vboxdrv: Successfully loaded version 6.1.6 (interface 0x002d0001)
[  618.730881] VBoxNetFlt: Successfully started.
[  618.740554] VBoxNetAdp: Successfully started.
[  619.114407] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[  619.121301] mc: Linux media interface: v0.10
[  619.142729] videodev: Linux video capture interface: v2.00
[  619.201902] Bluetooth: Core ver 2.22
[  619.203138] NET: Registered protocol family 31
[  619.204414] Bluetooth: HCI device and connection manager initialized
[  619.205590] Bluetooth: HCI socket layer initialized
[  619.206791] Bluetooth: L2CAP socket layer initialized
[  619.207881] Bluetooth: SCO socket layer initialized
[  619.231920] usbcore: registered new interface driver btusb
[  619.266535] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[  619.283320] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[  619.285148] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[  619.291694] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[  619.293069] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[  619.294327] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input35
[  619.296328] usbcore: registered new interface driver uvcvideo
[  619.297783] USB Video Class driver (1.1.1)
[  619.330507] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  619.331972] Bluetooth: BNEP filters: protocol multicast
[  619.333421] Bluetooth: BNEP socket layer initialized
[  619.343440] Bluetooth: hci0: BCM: chip id 63
[  619.345436] Bluetooth: hci0: BCM: features 0x07
[  619.363438] Bluetooth: hci0: TP-T430s
[  619.366446] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
[  619.371055] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd
[  619.720191] fuse: init (API version 7.31)
[  620.227429] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
[  620.243429] Bluetooth: hci0: Broadcom Bluetooth Device
[  620.549111] Bluetooth: RFCOMM TTY layer initialized
[  620.549118] Bluetooth: RFCOMM socket layer initialized
[  620.549123] Bluetooth: RFCOMM ver 1.11
[  621.246222] usblp 4-1.5.6.1.2:1.0: usblp3: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
[  621.246259] usbcore: registered new interface driver usblp
[  621.308227] usbcore: registered new interface driver usbserial_generic
[  621.309969] usbserial: USB Serial support registered for generic
[  621.316034] usbcore: registered new interface driver pl2303
[  621.316048] usbserial: USB Serial support registered for pl2303
[  621.316088] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected
[  621.321007] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0
[  622.839537] rfkill: input handler disabled
[  624.178758] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[  624.178796] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready
[  628.986908] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[  631.993379] rfkill: input handler enabled
[  633.362466] kauditd_printk_skb: 31 callbacks suppressed
[  633.362467] audit: type=1400 audit(1587591404.522:43): apparmor="DENIED" operation="open" profile="/usr/bin/freshclam" name="/run/systemd/userdb/" pid=2934 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[  633.896132] audit: type=1400 audit(1587591405.054:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3318 comm="apparmor_parser"
[  634.126027] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[  634.128197] Bridge firewalling registered
[  634.375862] Initializing XFRM netlink socket
[  635.843808] audit: type=1400 audit(1587591407.002:45): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/telepathy-*" name="/sys/devices/system/node/" pid=3749 comm="telepathy-haze" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  636.345866] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  636.663356] rfkill: input handler disabled
[  640.725266] logitech-hidpp-device 0003:046D:1028.0004: HID++ 1.0 device connected.