| [ 0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.130-2 (2018-10-27) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-8-amd64 root=/dev/mapper/beaver--vg-root ro quiet iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007ff35fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff36000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027b5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: LENOVO 4177RVU/4177RVU, BIOS CBET4000 4.8-2488-gb1baa980ea 12/08/2018 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x27b600 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000 mask F80000000 write-back |
| [ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining |
| [ 0.000000] 2 base 100000000 mask F00000000 write-back |
| [ 0.000000] 3 base 200000000 mask F80000000 write-back |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT |
| [ 0.000000] e820: last_pfn = 0x7ff36 max_arch_pfn = 0x400000000 |
| [ 0.000000] Base memory trampoline at [ffff8c8540099000] 99000 size 24576 |
| [ 0.000000] reserving inaccessible SNB gfx pages |
| [ 0.000000] BRK [0x12553a000, 0x12553afff] PGTABLE |
| [ 0.000000] BRK [0x12553b000, 0x12553bfff] PGTABLE |
| [ 0.000000] BRK [0x12553c000, 0x12553cfff] PGTABLE |
| [ 0.000000] BRK [0x12553d000, 0x12553dfff] PGTABLE |
| [ 0.000000] BRK [0x12553e000, 0x12553efff] PGTABLE |
| [ 0.000000] BRK [0x12553f000, 0x12553ffff] PGTABLE |
| [ 0.000000] BRK [0x125540000, 0x125540fff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x35845000-0x36c19fff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4) |
| [ 0.000000] ACPI: XSDT 0x000000007FF4A0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x000000007FF4D870 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x000000007FF4A280 0035E2 (v02 COREv4 COREBOOT 20110725 INTL 20180810) |
| [ 0.000000] ACPI: FACS 0x000000007FF4A240 000040 |
| [ 0.000000] ACPI: FACS 0x000000007FF4A240 000040 |
| [ 0.000000] ACPI: SSDT 0x000000007FF4D970 001A91 (v02 COREv4 COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 0x000000007FF4F410 00003C (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: TCPA 0x000000007FF4F450 000032 (v02 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x000000007FF4F490 00006C (v02 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DMAR 0x000000007FF4F500 0000A8 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x000000007FF515B0 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027b5fffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x27b5f6000-0x27b5fafff] |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000027b5fffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] |
| [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff] |
| [ 0.000000] node 0: [mem 0x0000000040200000-0x000000007ff35fff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027b5fffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027b5fffff] |
| [ 0.000000] On node 0 totalpages: 2076884 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 158 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 8109 pages used for memmap |
| [ 0.000000] DMA32 zone: 518966 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 24280 pages used for memmap |
| [ 0.000000] Normal zone: 1553920 pages, LIFO batch:31 |
| [ 0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x00000000829fffff |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x7ff36000-0x829fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 35 pages/cpu @ffff8c87bb200000 s105304 r8192 d29864 u524288 |
| [ 0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2044273 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-8-amd64 root=/dev/mapper/beaver--vg-root ro quiet iomem=relaxed |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 8073268K/8307536K available (6267K kernel code, 1159K rwdata, 2872K rodata, 1420K init, 688K bss, 234268K reserved, 0K cma-reserved) |
| [ 0.000000] Kernel/User page tables isolation: enabled |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] Build-time adjustment of leaf fanout to 64. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2790.806 MHz processor |
| [ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5581.61 BogoMIPS (lpj=11163224) |
| [ 0.000027] pid_max: default: 32768 minimum: 301 |
| [ 0.000040] ACPI: Core revision 20160831 |
| [ 0.002773] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.002811] Security Framework initialized |
| [ 0.002812] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.002817] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.003195] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.004593] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.005228] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.005236] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.005476] mce: CPU supports 7 MCE banks |
| [ 0.005483] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.005490] process: using mwait in idle threads |
| [ 0.005493] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.005494] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.005495] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.005496] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.005496] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier |
| [ 0.005497] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.005497] Speculative Store Bypass: Vulnerable |
| [ 0.005937] Freeing SMP alternatives memory: 24K |
| [ 0.007885] ftrace: allocating 25291 entries in 99 pages |
| [ 0.029241] smpboot: Max logical packages: 2 |
| [ 0.029246] DMAR: Host address width 36 |
| [ 0.029248] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.029257] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.029258] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.029261] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.029263] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.029264] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.029265] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.029556] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.029557] x2apic enabled |
| [ 0.029562] Switched APIC routing to cluster x2apic. |
| [ 0.030024] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.069714] TSC deadline timer enabled |
| [ 0.069717] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (family: 0x6, model: 0x2a, stepping: 0x7) |
| [ 0.069721] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.069748] ... version: 3 |
| [ 0.069748] ... bit width: 48 |
| [ 0.069749] ... generic registers: 4 |
| [ 0.069749] ... value mask: 0000ffffffffffff |
| [ 0.069750] ... max period: 00007fffffffffff |
| [ 0.069750] ... fixed-purpose events: 3 |
| [ 0.069751] ... event mask: 000000070000000f |
| [ 0.070287] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.070398] x86: Booting SMP configuration: |
| [ 0.070399] .... node #0, CPUs: #1 #2 #3 |
| [ 0.077733] x86: Booted up 1 node, 4 CPUs |
| [ 0.077736] smpboot: Total of 4 processors activated (22326.44 BogoMIPS) |
| [ 0.081132] devtmpfs: initialized |
| [ 0.081200] x86/mm: Memory block size: 128MB |
| [ 0.083684] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.083693] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.083731] pinctrl core: initialized pinctrl subsystem |
| [ 0.083832] NET: Registered protocol family 16 |
| [ 0.096826] cpuidle: using governor ladder |
| [ 0.112842] cpuidle: using governor menu |
| [ 0.112914] ACPI: bus type PCI registered |
| [ 0.112918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.113001] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.113003] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.113011] PCI: Using configuration type 1 for base access |
| [ 0.113045] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.125049] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 0.125281] ACPI: Added _OSI(Module Device) |
| [ 0.125281] ACPI: Added _OSI(Processor Device) |
| [ 0.125282] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.125283] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.125419] ACPI: Executed 1 blocks of module-level executable AML code |
| [ 0.127589] ACPI : EC: EC started |
| [ 0.127590] ACPI : EC: interrupt blocked |
| [ 0.128132] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.128134] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.128135] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.128136] ACPI: Interpreter enabled |
| [ 0.128150] ACPI: (supports S0 S3 S4 S5) |
| [ 0.128151] ACPI: Using IOAPIC for interrupt routing |
| [ 0.128168] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.134214] ACPI: Power Resource [FPWR] (off) |
| [ 0.134520] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.134524] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.134571] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.134579] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.134633] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff]) |
| [ 0.134797] PCI host bridge to bus 0000:00 |
| [ 0.134799] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.134800] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.134801] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.134803] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.134804] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.134806] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.134808] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.134809] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.134810] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.134812] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.134813] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.134814] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.134816] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.134817] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.134818] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.134819] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window] |
| [ 0.134821] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.134822] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.134830] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 |
| [ 0.134919] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 |
| [ 0.134928] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit] |
| [ 0.134933] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.134936] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.135015] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000 |
| [ 0.135023] pci 0000:00:04.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) |
| [ 0.135129] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.135144] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff] |
| [ 0.135152] pci 0000:00:19.0: reg 0x14: [mem 0xe162c000-0xe162cfff] |
| [ 0.135161] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.135220] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.135293] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 |
| [ 0.135310] pci 0000:00:1a.0: reg 0x10: [mem 0xe162f000-0xe162f3ff] |
| [ 0.135393] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.135433] pci 0000:00:1a.0: System wakeup disabled by ACPI |
| [ 0.135475] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 |
| [ 0.135492] pci 0000:00:1b.0: reg 0x10: [mem 0xe1628000-0xe162bfff 64bit] |
| [ 0.135562] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.135606] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| [ 0.135650] pci 0000:00:1c.0: [8086:1c12] type 01 class 0x060400 |
| [ 0.135774] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.135867] pci 0000:00:1c.1: [8086:1c16] type 01 class 0x060400 |
| [ 0.135990] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.136085] pci 0000:00:1c.3: [8086:1c18] type 01 class 0x060400 |
| [ 0.136211] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| [ 0.136303] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 |
| [ 0.136321] pci 0000:00:1d.0: reg 0x10: [mem 0xe1630000-0xe16303ff] |
| [ 0.136403] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.136442] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| [ 0.136482] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 |
| [ 0.136649] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 |
| [ 0.136665] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.136674] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.136682] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.136690] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.136699] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.136707] pci 0000:00:1f.2: reg 0x24: [mem 0xe162e000-0xe162e7ff] |
| [ 0.136751] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.136823] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 |
| [ 0.136839] pci 0000:00:1f.3: reg 0x10: [mem 0xe1631000-0xe16310ff 64bit] |
| [ 0.136864] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.136953] pci 0000:00:1f.6: [8086:1c24] type 00 class 0x118000 |
| [ 0.136973] pci 0000:00:1f.6: reg 0x10: [mem 0xe162d000-0xe162dfff 64bit] |
| [ 0.137289] pci 0000:01:00.0: [8086:4238] type 00 class 0x028000 |
| [ 0.137474] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe1401fff 64bit] |
| [ 0.138054] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.152970] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.152978] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.153065] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.153069] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.153074] pci 0000:00:1c.1: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.153082] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.153186] pci 0000:03:00.0: [1180:e822] type 00 class 0x080501 |
| [ 0.153220] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.153257] pci 0000:03:00.0: reg 0x10: [mem 0xe1500000-0xe15000ff] |
| [ 0.153563] pci 0000:03:00.0: supports D1 D2 |
| [ 0.153564] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.168922] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| [ 0.168937] pci 0000:00:1c.3: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.169120] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.169165] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.169208] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.169250] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.169293] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.169335] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.169378] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.169420] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.170297] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.170356] ACPI : EC: interrupt unblocked |
| [ 0.170361] ACPI : EC: event unblocked |
| [ 0.170367] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.170368] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.170437] vgaarb: setting as boot device: PCI:0000:00:02.0 |
| [ 0.170438] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.170440] vgaarb: loaded |
| [ 0.170440] vgaarb: bridge control possible 0000:00:02.0 |
| [ 0.170505] PCI: Using ACPI for IRQ routing |
| [ 0.172013] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.172120] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.172122] e820: reserve RAM buffer [mem 0x7ff36000-0x7fffffff] |
| [ 0.172123] e820: reserve RAM buffer [mem 0x27b600000-0x27bffffff] |
| [ 0.172256] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.172261] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.175285] clocksource: Switched to clocksource hpet |
| [ 0.180917] VFS: Disk quotas dquot_6.6.0 |
| [ 0.180945] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.181029] pnp: PnP ACPI init |
| [ 0.181165] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.181167] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.181168] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.181170] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.181171] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.181173] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.181175] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.181176] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.181178] system 00:00: [mem 0x20000000-0x201fffff] has been reserved |
| [ 0.181179] system 00:00: [mem 0x40000000-0x401fffff] has been reserved |
| [ 0.181183] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.181687] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.181690] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.181728] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.181730] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.181732] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.181755] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.181785] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.181812] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.181839] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.181858] pnp: PnP ACPI: found 7 devices |
| [ 0.188148] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.188190] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.188198] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.188210] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.188213] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.188219] pci 0000:00:1c.1: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.188224] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.188232] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| [ 0.188239] pci 0000:00:1c.3: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.188251] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.188253] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.188254] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.188255] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.188256] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.188258] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.188259] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.188260] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.188262] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.188263] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.188264] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.188265] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.188267] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.188268] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.188269] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.188271] pci_bus 0000:00: resource 19 [mem 0x82a00001-0xefffffff window] |
| [ 0.188272] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.188273] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff] |
| [ 0.188275] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.188276] pci_bus 0000:02: resource 1 [mem 0xe0800000-0xe0ffffff] |
| [ 0.188277] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.188279] pci_bus 0000:03: resource 1 [mem 0xe1500000-0xe15fffff] |
| [ 0.188363] NET: Registered protocol family 2 |
| [ 0.188543] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.188661] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.188779] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.188801] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.188823] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.188879] NET: Registered protocol family 1 |
| [ 0.188892] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.189235] PCI: CLS 64 bytes, default 64 |
| [ 0.189279] Unpacking initramfs... |
| [ 0.508475] Freeing initrd memory: 20308K |
| [ 0.508579] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.508582] software IO TLB [mem 0x7bf36000-0x7ff36000] (64MB) mapped at [ffff8c85bbf36000-ffff8c85bff35fff] |
| [ 0.508910] audit: initializing netlink subsys (disabled) |
| [ 0.508927] audit: type=2000 audit(1544378862.504:1): initialized |
| [ 0.509300] workingset: timestamp_bits=40 max_order=21 bucket_order=0 |
| [ 0.509337] zbud: loaded |
| [ 0.510118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 0.510148] io scheduler noop registered |
| [ 0.510149] io scheduler deadline registered |
| [ 0.510159] io scheduler cfq registered (default) |
| [ 0.510759] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt |
| [ 0.510761] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.510766] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded |
| [ 0.510785] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt |
| [ 0.510790] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded |
| [ 0.510808] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt |
| [ 0.510810] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.510815] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded |
| [ 0.510823] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 0.510835] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 0.510863] pciehp 0000:00:1c.1:pcie004: service driver pciehp loaded |
| [ 0.510867] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 0.510880] intel_idle: MWAIT substates: 0x21120 |
| [ 0.510881] intel_idle: v0.4.1 model 0x2A |
| [ 0.511025] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.511396] GHES: HEST is not enabled! |
| [ 0.511442] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.511796] Linux agpgart interface v0.103 |
| [ 0.527345] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 0.623516] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 0.623517] AMD IOMMUv2 functionality not available on this system |
| [ 0.623879] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.629014] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.629018] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.629270] mousedev: PS/2 mouse device common for all mice |
| [ 0.629320] rtc_cmos 00:03: RTC can wake from S4 |
| [ 0.629531] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| [ 0.629562] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 0.629576] intel_pstate: Intel P-state driver initializing |
| [ 0.630139] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 0.630862] NET: Registered protocol family 10 |
| [ 0.631455] mip6: Mobile IPv6 |
| [ 0.631459] NET: Registered protocol family 17 |
| [ 0.631464] mpls_gso: MPLS GSO support |
| [ 0.632066] microcode: sig=0x206a7, pf=0x10, revision=0x2d |
| [ 0.632271] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 0.632595] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 0.634203] registered taskstats version 1 |
| [ 0.634239] zswap: loaded using pool lzo/zbud |
| [ 0.647438] ima: Allocated hash algorithm: sha256 |
| [ 0.792006] rtc_cmos 00:03: setting system clock to 2018-12-09 18:07:43 UTC (1544378863) |
| [ 0.792119] PM: Hibernation image not present or could not be loaded. |
| [ 0.794083] Freeing unused kernel memory: 1420K |
| [ 0.794086] Write protecting the kernel read-only data: 12288k |
| [ 0.795355] Freeing unused kernel memory: 1908K |
| [ 0.802557] Freeing unused kernel memory: 1224K |
| [ 0.816088] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 0.948618] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 0.948723] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 0.948737] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 0.994129] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.994131] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.994365] PTP clock support registered |
| [ 0.994678] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.994679] ACPI: Thermal Zone [THM0] (54 C) |
| [ 0.995904] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 0.995905] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 0.995979] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 0.996031] ACPI: bus type USB registered |
| [ 0.996058] usbcore: registered new interface driver usbfs |
| [ 0.996069] usbcore: registered new interface driver hub |
| [ 0.996087] usbcore: registered new device driver usb |
| [ 0.996572] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 0.996762] ehci-pci: EHCI PCI platform driver |
| [ 0.996891] sdhci: Secure Digital Host Controller Interface driver |
| [ 0.996892] sdhci: Copyright(c) Pierre Ossman |
| [ 0.997135] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 8) |
| [ 0.998165] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 0.998166] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.003841] AVX version of gcm_enc/dec engaged. |
| [ 1.003842] AES CTR mode by8 optimization enabled |
| [ 1.010208] SCSI subsystem initialized |
| [ 1.012695] libata version 3.00 loaded. |
| [ 1.013629] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA |
| [ 1.105455] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.210967] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:c3:ba:30 |
| [ 1.210974] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.211054] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.211552] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.211571] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.211610] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.213069] e1000e 0000:00:19.0 enp0s25: renamed from eth0 |
| [ 1.215556] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.215615] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe162f000 |
| [ 1.231465] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.231631] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.231636] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.231640] usb usb1: Product: EHCI Host Controller |
| [ 1.231643] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd |
| [ 1.231647] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.232152] hub 1-0:1.0: USB hub found |
| [ 1.232165] hub 1-0:1.0: 3 ports detected |
| [ 1.232593] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.232611] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 1.232636] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.236549] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.236593] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1630000 |
| [ 1.251447] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.251585] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.251589] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.251592] usb usb2: Product: EHCI Host Controller |
| [ 1.251594] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd |
| [ 1.251597] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 1.252002] hub 2-0:1.0: USB hub found |
| [ 1.252015] hub 2-0:1.0: 3 ports detected |
| [ 1.252565] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.253682] ahci 0000:00:1f.2: version 3.0 |
| [ 1.253975] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.264147] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode |
| [ 1.264151] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.265809] scsi host0: ahci |
| [ 1.266077] scsi host1: ahci |
| [ 1.266287] scsi host2: ahci |
| [ 1.266487] scsi host3: ahci |
| [ 1.266677] scsi host4: ahci |
| [ 1.266865] scsi host5: ahci |
| [ 1.266985] ata1: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e100 irq 30 |
| [ 1.266989] ata2: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e180 irq 30 |
| [ 1.266993] ata3: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e200 irq 30 |
| [ 1.266997] ata4: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e280 irq 30 |
| [ 1.267001] ata5: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e300 irq 30 |
| [ 1.267003] ata6: DUMMY |
| [ 1.535457] tsc: Refined TSC clocksource calibration: 2790.934 MHz |
| [ 1.535476] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x283acc80692, max_idle_ns: 440795346123 ns |
| [ 1.559473] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.579483] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.583172] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 1.586057] ata1.00: ATA-8: ST320LT007-9ZV142, 0004LVM1, max UDMA/133 |
| [ 1.586063] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) |
| [ 1.589488] ata1.00: configured for UDMA/133 |
| [ 1.590319] scsi 0:0:0:0: Direct-Access ATA ST320LT007-9ZV14 LVM1 PQ: 0 ANSI: 5 |
| [ 1.708150] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.708157] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.708859] hub 1-1:1.0: USB hub found |
| [ 1.710169] hub 1-1:1.0: 6 ports detected |
| [ 1.728178] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.728184] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.728852] hub 2-1:1.0: USB hub found |
| [ 1.730279] hub 2-1:1.0: 8 ports detected |
| [ 1.731676] random: fast init done |
| [ 1.820428] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 1.899162] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| [ 1.899185] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 1.935454] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 1.949164] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3 |
| [ 1.983775] ata2.00: ATA-8: ST9500325ASG, 0009APM1, max UDMA/133 |
| [ 1.983781] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) |
| [ 1.985921] ata2.00: configured for UDMA/133 |
| [ 1.986708] scsi 1:0:0:0: Direct-Access ATA ST9500325ASG APM1 PQ: 0 ANSI: 5 |
| [ 1.999441] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.109236] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 |
| [ 2.109242] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.109246] usb 1-1.3: Product: Biometric Coprocessor |
| [ 2.109250] usb 1-1.3: Manufacturer: UPEK |
| [ 2.187485] usb 1-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 2.300452] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f |
| [ 2.300458] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.300462] usb 1-1.4: Product: Broadcom Bluetooth Device |
| [ 2.300466] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.300470] usb 1-1.4: SerialNumber: 402CF4F6A5DE |
| [ 2.331290] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.379525] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.494623] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b221 |
| [ 2.494630] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.494634] usb 1-1.6: Product: Integrated Camera |
| [ 2.494638] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. |
| [ 2.559794] clocksource: Switched to clocksource tsc |
| [ 2.647352] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 2.693760] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 2.941035] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input4 |
| [ 2.963220] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.968804] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) |
| [ 2.968812] sd 0:0:0:0: [sda] 4096-byte physical blocks |
| [ 2.968979] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) |
| [ 2.969050] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.969061] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.969138] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 2.969143] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.969147] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 2.969204] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.009556] sda: sda1 sda2 < sda5 > |
| [ 3.011132] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.073333] sdb: sdb1 |
| [ 3.074869] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 3.416814] device-mapper: uevent: version 1.0.3 |
| [ 3.416954] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com |
| [ 6.285041] random: crng init done |
| [ 6.285047] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 7.924904] NET: Registered protocol family 38 |
| [ 8.827466] PM: Starting manual resume from disk |
| [ 8.827473] PM: Hibernation image partition 254:2 present |
| [ 8.827475] PM: Looking for hibernation image. |
| [ 8.827834] PM: Image not found (code -22) |
| [ 8.827837] PM: Hibernation image not present or could not be loaded. |
| [ 9.174576] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 11.740035] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 11.989214] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) |
| [ 11.989681] systemd[1]: Detected architecture x86-64. |
| [ 12.008768] systemd[1]: Set hostname to <beaver>. |
| [ 14.270565] systemd[1]: tor.service: Cannot add dependency job, ignoring: Unit tor.service is masked. |
| [ 14.274490] systemd[1]: Created slice User and Session Slice. |
| [ 14.274732] systemd[1]: Listening on Device-mapper event daemon FIFOs. |
| [ 14.274954] systemd[1]: Listening on Journal Audit Socket. |
| [ 14.275075] systemd[1]: Listening on udev Control Socket. |
| [ 14.275148] systemd[1]: Listening on fsck to fsckd communication Socket. |
| [ 14.275181] systemd[1]: Reached target User and Group Name Lookups. |
| [ 15.246077] lp: driver loaded but no devices found |
| [ 15.353243] ppdev: user-space parallel port driver |
| [ 15.700551] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| [ 15.962677] systemd-journald[297]: Received request to flush runtime journal from PID 1 |
| [ 15.993219] RPC: Registered named UNIX socket transport module. |
| [ 15.993222] RPC: Registered udp transport module. |
| [ 15.993223] RPC: Registered tcp transport module. |
| [ 15.993224] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 18.295436] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 18.364065] ACPI: AC Adapter [AC] (off-line) |
| [ 18.375061] ACPI: Battery Slot [BAT0] (battery present) |
| [ 18.375208] ACPI: Battery Slot [BAT1] (battery absent) |
| [ 18.375380] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input5 |
| [ 18.375383] ACPI: Sleep Button [SLPB] |
| [ 18.375555] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input6 |
| [ 18.375681] ACPI: Lid Switch [LID] |
| [ 18.375797] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 |
| [ 18.375799] ACPI: Power Button [PWRF] |
| [ 18.417235] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247) |
| [ 18.417242] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 18.417245] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247) |
| [ 18.417249] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 18.417250] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247) |
| [ 18.417254] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 18.417255] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247) |
| [ 18.417259] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 18.417259] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 18.510891] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 18.510941] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 18.578890] input: PC Speaker as /devices/platform/pcspkr/input/input8 |
| [ 18.937806] Non-volatile memory driver v1.3 |
| [ 19.022711] [drm] Initialized |
| [ 19.323989] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing. |
| [ 19.324513] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker |
| [ 19.324518] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 19.324523] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) |
| [ 19.324526] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 |
| [ 19.324529] snd_hda_codec_conexant hdaudioC0D0: dig-out=0x20/0x22 |
| [ 19.324532] snd_hda_codec_conexant hdaudioC0D0: inputs: |
| [ 19.324536] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 |
| [ 19.324540] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a |
| [ 19.326103] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication |
| [ 19.452645] thinkpad_acpi: ThinkPad ACPI Extras v0.25 |
| [ 19.452647] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 19.452648] thinkpad_acpi: ThinkPad BIOS CBET4000 4.8-2488-gb1baa980ea, EC 83HT27WW-3.20 |
| [ 19.452649] thinkpad_acpi: Lenovo ThinkPad T420, model 4177RVU |
| [ 19.453099] thinkpad_acpi: radio switch found; radios are enabled |
| [ 19.453220] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode |
| [ 19.453310] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 19.453310] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 19.454956] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 19.455625] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| [ 19.457112] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 19.457232] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 19.458970] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10 |
| [ 19.629957] Intel(R) Wireless WiFi driver for Linux |
| [ 19.629960] Copyright(c) 2003- 2015 Intel Corporation |
| [ 19.727282] iwlwifi 0000:01:00.0: firmware: direct-loading firmware iwlwifi-6000-4.ucode |
| [ 19.727466] iwlwifi 0000:01:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm |
| [ 20.011533] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled |
| [ 20.011536] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled |
| [ 20.011538] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled |
| [ 20.011541] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 |
| [ 20.013586] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| [ 20.142969] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' |
| [ 20.214751] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 20.214754] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 20.214756] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 20.214757] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 20.754388] iTCO_vendor_support: vendor-support=0 |
| [ 20.845347] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 20.845407] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 20.845555] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 21.174129] i915: unknown parameter 'i915_enable_rc6' ignored |
| [ 21.174133] i915: unknown parameter 'i915_enable_fbc' ignored |
| [ 21.174136] i915: unknown parameter 'lvds_downclock' ignored |
| [ 21.174893] [drm] Memory usable by graphics device = 2048M |
| [ 21.174895] [drm] Replacing VGA console driver |
| [ 21.175523] Console: switching to colour dummy device 80x25 |
| [ 21.234234] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 21.234238] [drm] Driver supports precise vblank timestamp query. |
| [ 21.235012] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 21.516602] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 21.541642] acpi device:0d: registered as cooling_device5 |
| [ 21.541759] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14 |
| [ 21.541939] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 21.541948] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 |
| [ 21.697093] Adding 8151036k swap on /dev/mapper/beaver--vg-swap_1. Priority:-1 extents:1 across:8151036k FS |
| [ 21.760924] fbcon: inteldrmfb (fb0) is primary device |
| [ 22.107750] Console: switching to colour frame buffer device 200x56 |
| [ 22.130211] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 22.150959] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 |
| [ 22.151374] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 22.151426] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 22.151476] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 22.151529] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 22.151577] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 22.151626] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 22.392094] intel_rapl: Found RAPL domain package |
| [ 22.392096] intel_rapl: Found RAPL domain core |
| [ 22.392099] intel_rapl: Found RAPL domain uncore |
| [ 24.071525] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| [ 24.162068] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| [ 25.940765] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30 |
| [ 26.049076] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4 |
| [ 26.345844] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30 |
| [ 26.454784] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4 |
| [ 26.964413] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30 |
| [ 27.019934] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4 |
| [ 27.565460] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30 |
| [ 27.704923] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4 |
| [ 28.192885] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30 |
| [ 28.317643] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4 |
| [ 28.919865] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30 |
| [ 28.990297] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4 |
| [ 29.014165] media: Linux media interface: v0.10 |
| [ 29.068920] Linux video capture interface: v2.00 |
| [ 29.400946] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b221) |
| [ 29.402320] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 29.402322] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 29.402324] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 29.402412] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18 |
| [ 29.402481] usbcore: registered new interface driver uvcvideo |
| [ 29.402481] USB Video Class driver (1.1.1) |
| [ 29.820559] Bluetooth: Core ver 2.22 |
| [ 29.820586] NET: Registered protocol family 31 |
| [ 29.820587] Bluetooth: HCI device and connection manager initialized |
| [ 29.820594] Bluetooth: HCI socket layer initialized |
| [ 29.820598] Bluetooth: L2CAP socket layer initialized |
| [ 29.820608] Bluetooth: SCO socket layer initialized |
| [ 30.110070] usbcore: registered new interface driver btusb |
| [ 30.240811] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30 |
| [ 30.354279] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4 |
| [ 30.856494] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30 |
| [ 30.958693] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4 |
| [ 39.296869] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30 |
| [ 39.486299] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4 |
| [ 39.725784] cgroup: new mount options do not match the existing superblock, will be ignored |
| [ 40.291421] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 40.291425] Bluetooth: BNEP filters: protocol multicast |
| [ 40.291433] Bluetooth: BNEP socket layer initialized |
| [ 40.465177] fuse init (API version 7.26) |
| [ 45.769559] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 46.013961] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 46.025881] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 46.028163] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| [ 46.028354] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| [ 46.028459] iwlwifi 0000:01:00.0: Radio type=0x0-0x3-0x1 |
| [ 46.261596] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| [ 46.261790] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| [ 46.261896] iwlwifi 0000:01:00.0: Radio type=0x0-0x3-0x1 |
| [ 46.346715] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 46.353496] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| [ 46.353686] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| [ 46.353791] iwlwifi 0000:01:00.0: Radio type=0x0-0x3-0x1 |
| [ 46.585848] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| [ 46.586043] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| [ 46.586149] iwlwifi 0000:01:00.0: Radio type=0x0-0x3-0x1 |
| [ 46.672905] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 47.080370] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 50.149722] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| [ 50.149906] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| [ 50.150008] iwlwifi 0000:01:00.0: Radio type=0x0-0x3-0x1 |
| [ 50.381858] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| [ 50.382053] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| [ 50.382159] iwlwifi 0000:01:00.0: Radio type=0x0-0x3-0x1 |
| [ 50.465192] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 50.527918] wlan0: authenticate with c4:27:95:30:73:d6 |
| [ 50.560675] wlan0: send auth to c4:27:95:30:73:d6 (try 1/3) |
| [ 50.563600] wlan0: authenticated |
| [ 50.565639] wlan0: associate with c4:27:95:30:73:d6 (try 1/3) |
| [ 50.569205] wlan0: RX AssocResp from c4:27:95:30:73:d6 (capab=0x411 status=0 aid=2) |
| [ 50.572749] wlan0: associated |
| [ 50.762296] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| [ 66.073254] Bluetooth: RFCOMM TTY layer initialized |
| [ 66.073264] Bluetooth: RFCOMM socket layer initialized |
| [ 66.073277] Bluetooth: RFCOMM ver 1.11 |
| [ 96.277882] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 96.289077] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=0 |
| [ 96.352847] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4 |
| [ 96.571652] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 96.896390] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 97.220332] ata5: SATA link down (SStatus 0 SControl 300) |