[    0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.130-2 (2018-10-27)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-8-amd64 root=/dev/mapper/beaver--vg-root ro quiet iomem=relaxed
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007ff35fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff36000-0x00000000829fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027b5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 4177RVU/4177RVU, BIOS CBET4000 4.8-2488-gb1baa980ea 12/08/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27b600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   2 base 100000000 mask F00000000 write-back
[    0.000000]   3 base 200000000 mask F80000000 write-back
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7ff36 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff8c8540099000] 99000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x12553a000, 0x12553afff] PGTABLE
[    0.000000] BRK [0x12553b000, 0x12553bfff] PGTABLE
[    0.000000] BRK [0x12553c000, 0x12553cfff] PGTABLE
[    0.000000] BRK [0x12553d000, 0x12553dfff] PGTABLE
[    0.000000] BRK [0x12553e000, 0x12553efff] PGTABLE
[    0.000000] BRK [0x12553f000, 0x12553ffff] PGTABLE
[    0.000000] BRK [0x125540000, 0x125540fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35845000-0x36c19fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
[    0.000000] ACPI: XSDT 0x000000007FF4A0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FF4D870 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FF4A280 0035E2 (v02 COREv4 COREBOOT 20110725 INTL 20180810)
[    0.000000] ACPI: FACS 0x000000007FF4A240 000040
[    0.000000] ACPI: FACS 0x000000007FF4A240 000040
[    0.000000] ACPI: SSDT 0x000000007FF4D970 001A91 (v02 COREv4 COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FF4F410 00003C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FF4F450 000032 (v02 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FF4F490 00006C (v02 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x000000007FF4F500 0000A8 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FF515B0 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027b5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27b5f6000-0x27b5fafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027b5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x000000007ff35fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027b5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027b5fffff]
[    0.000000] On node 0 totalpages: 2076884
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 158 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8109 pages used for memmap
[    0.000000]   DMA32 zone: 518966 pages, LIFO batch:31
[    0.000000]   Normal zone: 24280 pages used for memmap
[    0.000000]   Normal zone: 1553920 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x00000000829fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ff36000-0x829fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8c87bb200000 s105304 r8192 d29864 u524288
[    0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2044273
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-8-amd64 root=/dev/mapper/beaver--vg-root ro quiet iomem=relaxed
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8073268K/8307536K available (6267K kernel code, 1159K rwdata, 2872K rodata, 1420K init, 688K bss, 234268K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2790.806 MHz processor
[    0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5581.61 BogoMIPS (lpj=11163224)
[    0.000027] pid_max: default: 32768 minimum: 301
[    0.000040] ACPI: Core revision 20160831
[    0.002773] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.002811] Security Framework initialized
[    0.002812] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.002817] AppArmor: AppArmor disabled by boot time parameter
[    0.003195] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.004593] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005228] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.005236] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.005476] mce: CPU supports 7 MCE banks
[    0.005483] CPU0: Thermal monitoring enabled (TM1)
[    0.005490] process: using mwait in idle threads
[    0.005493] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.005494] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.005495] Spectre V2 : Mitigation: Full generic retpoline
[    0.005496] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.005496] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.005497] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.005497] Speculative Store Bypass: Vulnerable
[    0.005937] Freeing SMP alternatives memory: 24K
[    0.007885] ftrace: allocating 25291 entries in 99 pages
[    0.029241] smpboot: Max logical packages: 2
[    0.029246] DMAR: Host address width 36
[    0.029248] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.029257] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.029258] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.029261] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.029263] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.029264] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.029265] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.029556] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.029557] x2apic enabled
[    0.029562] Switched APIC routing to cluster x2apic.
[    0.030024] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.069714] TSC deadline timer enabled
[    0.069717] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.069721] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.069748] ... version:                3
[    0.069748] ... bit width:              48
[    0.069749] ... generic registers:      4
[    0.069749] ... value mask:             0000ffffffffffff
[    0.069750] ... max period:             00007fffffffffff
[    0.069750] ... fixed-purpose events:   3
[    0.069751] ... event mask:             000000070000000f
[    0.070287] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.070398] x86: Booting SMP configuration:
[    0.070399] .... node  #0, CPUs:      #1 #2 #3
[    0.077733] x86: Booted up 1 node, 4 CPUs
[    0.077736] smpboot: Total of 4 processors activated (22326.44 BogoMIPS)
[    0.081132] devtmpfs: initialized
[    0.081200] x86/mm: Memory block size: 128MB
[    0.083684] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.083693] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.083731] pinctrl core: initialized pinctrl subsystem
[    0.083832] NET: Registered protocol family 16
[    0.096826] cpuidle: using governor ladder
[    0.112842] cpuidle: using governor menu
[    0.112914] ACPI: bus type PCI registered
[    0.112918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.113001] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.113003] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.113011] PCI: Using configuration type 1 for base access
[    0.113045] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.125049] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.125281] ACPI: Added _OSI(Module Device)
[    0.125281] ACPI: Added _OSI(Processor Device)
[    0.125282] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.125283] ACPI: Added _OSI(Processor Aggregator Device)
[    0.125419] ACPI: Executed 1 blocks of module-level executable AML code
[    0.127589] ACPI : EC: EC started
[    0.127590] ACPI : EC: interrupt blocked
[    0.128132] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.128134] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.128135] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.128136] ACPI: Interpreter enabled
[    0.128150] ACPI: (supports S0 S3 S4 S5)
[    0.128151] ACPI: Using IOAPIC for interrupt routing
[    0.128168] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.134214] ACPI: Power Resource [FPWR] (off)
[    0.134520] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.134524] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.134571] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.134579] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.134633] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff])
[    0.134797] PCI host bridge to bus 0000:00
[    0.134799] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.134800] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.134801] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.134803] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.134804] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.134806] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.134808] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.134809] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.134810] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.134812] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.134813] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.134814] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.134816] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.134817] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.134818] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.134819] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window]
[    0.134821] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.134822] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.134830] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.134919] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.134928] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[    0.134933] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.134936] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.135015] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[    0.135023] pci 0000:00:04.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
[    0.135129] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.135144] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[    0.135152] pci 0000:00:19.0: reg 0x14: [mem 0xe162c000-0xe162cfff]
[    0.135161] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.135220] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.135293] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.135310] pci 0000:00:1a.0: reg 0x10: [mem 0xe162f000-0xe162f3ff]
[    0.135393] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.135433] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.135475] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.135492] pci 0000:00:1b.0: reg 0x10: [mem 0xe1628000-0xe162bfff 64bit]
[    0.135562] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.135606] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.135650] pci 0000:00:1c.0: [8086:1c12] type 01 class 0x060400
[    0.135774] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.135867] pci 0000:00:1c.1: [8086:1c16] type 01 class 0x060400
[    0.135990] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.136085] pci 0000:00:1c.3: [8086:1c18] type 01 class 0x060400
[    0.136211] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.136303] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.136321] pci 0000:00:1d.0: reg 0x10: [mem 0xe1630000-0xe16303ff]
[    0.136403] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.136442] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.136482] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.136649] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.136665] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.136674] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.136682] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.136690] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.136699] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.136707] pci 0000:00:1f.2: reg 0x24: [mem 0xe162e000-0xe162e7ff]
[    0.136751] pci 0000:00:1f.2: PME# supported from D3hot
[    0.136823] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.136839] pci 0000:00:1f.3: reg 0x10: [mem 0xe1631000-0xe16310ff 64bit]
[    0.136864] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.136953] pci 0000:00:1f.6: [8086:1c24] type 00 class 0x118000
[    0.136973] pci 0000:00:1f.6: reg 0x10: [mem 0xe162d000-0xe162dfff 64bit]
[    0.137289] pci 0000:01:00.0: [8086:4238] type 00 class 0x028000
[    0.137474] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe1401fff 64bit]
[    0.138054] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.152970] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.152978] pci 0000:00:1c.0:   bridge window [mem 0xe1400000-0xe14fffff]
[    0.153065] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.153069] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.153074] pci 0000:00:1c.1:   bridge window [mem 0xe0800000-0xe0ffffff]
[    0.153082] pci 0000:00:1c.1:   bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.153186] pci 0000:03:00.0: [1180:e822] type 00 class 0x080501
[    0.153220] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
[    0.153257] pci 0000:03:00.0: reg 0x10: [mem 0xe1500000-0xe15000ff]
[    0.153563] pci 0000:03:00.0: supports D1 D2
[    0.153564] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.168922] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.168937] pci 0000:00:1c.3:   bridge window [mem 0xe1500000-0xe15fffff]
[    0.169120] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.169165] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.169208] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.169250] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.169293] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.169335] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.169378] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.169420] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.170297] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.170356] ACPI : EC: interrupt unblocked
[    0.170361] ACPI : EC: event unblocked
[    0.170367] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.170368] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.170437] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.170438] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.170440] vgaarb: loaded
[    0.170440] vgaarb: bridge control possible 0000:00:02.0
[    0.170505] PCI: Using ACPI for IRQ routing
[    0.172013] PCI: pci_cache_line_size set to 64 bytes
[    0.172120] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.172122] e820: reserve RAM buffer [mem 0x7ff36000-0x7fffffff]
[    0.172123] e820: reserve RAM buffer [mem 0x27b600000-0x27bffffff]
[    0.172256] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.172261] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.175285] clocksource: Switched to clocksource hpet
[    0.180917] VFS: Disk quotas dquot_6.6.0
[    0.180945] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.181029] pnp: PnP ACPI init
[    0.181165] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.181167] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.181168] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.181170] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.181171] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.181173] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.181175] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.181176] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.181178] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.181179] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.181183] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.181687] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.181690] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.181728] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.181730] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.181732] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.181755] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.181785] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.181812] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.181839] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.181858] pnp: PnP ACPI: found 7 devices
[    0.188148] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.188190] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.188198] pci 0000:00:1c.0:   bridge window [mem 0xe1400000-0xe14fffff]
[    0.188210] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.188213] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.188219] pci 0000:00:1c.1:   bridge window [mem 0xe0800000-0xe0ffffff]
[    0.188224] pci 0000:00:1c.1:   bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.188232] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.188239] pci 0000:00:1c.3:   bridge window [mem 0xe1500000-0xe15fffff]
[    0.188251] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.188253] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.188254] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.188255] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.188256] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.188258] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.188259] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.188260] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.188262] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.188263] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.188264] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.188265] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.188267] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.188268] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.188269] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.188271] pci_bus 0000:00: resource 19 [mem 0x82a00001-0xefffffff window]
[    0.188272] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.188273] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
[    0.188275] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.188276] pci_bus 0000:02: resource 1 [mem 0xe0800000-0xe0ffffff]
[    0.188277] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.188279] pci_bus 0000:03: resource 1 [mem 0xe1500000-0xe15fffff]
[    0.188363] NET: Registered protocol family 2
[    0.188543] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.188661] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.188779] TCP: Hash tables configured (established 65536 bind 65536)
[    0.188801] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.188823] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.188879] NET: Registered protocol family 1
[    0.188892] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.189235] PCI: CLS 64 bytes, default 64
[    0.189279] Unpacking initramfs...
[    0.508475] Freeing initrd memory: 20308K
[    0.508579] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.508582] software IO TLB [mem 0x7bf36000-0x7ff36000] (64MB) mapped at [ffff8c85bbf36000-ffff8c85bff35fff]
[    0.508910] audit: initializing netlink subsys (disabled)
[    0.508927] audit: type=2000 audit(1544378862.504:1): initialized
[    0.509300] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.509337] zbud: loaded
[    0.510118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.510148] io scheduler noop registered
[    0.510149] io scheduler deadline registered
[    0.510159] io scheduler cfq registered (default)
[    0.510759] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.510761] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.510766] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    0.510785] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.510790] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[    0.510808] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.510810] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.510815] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[    0.510823] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.510835] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.510863] pciehp 0000:00:1c.1:pcie004: service driver pciehp loaded
[    0.510867] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.510880] intel_idle: MWAIT substates: 0x21120
[    0.510881] intel_idle: v0.4.1 model 0x2A
[    0.511025] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.511396] GHES: HEST is not enabled!
[    0.511442] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.511796] Linux agpgart interface v0.103
[    0.527345] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[    0.623516] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.623517] AMD IOMMUv2 functionality not available on this system
[    0.623879] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.629014] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.629018] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.629270] mousedev: PS/2 mouse device common for all mice
[    0.629320] rtc_cmos 00:03: RTC can wake from S4
[    0.629531] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.629562] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.629576] intel_pstate: Intel P-state driver initializing
[    0.630139] ledtrig-cpu: registered to indicate activity on CPUs
[    0.630862] NET: Registered protocol family 10
[    0.631455] mip6: Mobile IPv6
[    0.631459] NET: Registered protocol family 17
[    0.631464] mpls_gso: MPLS GSO support
[    0.632066] microcode: sig=0x206a7, pf=0x10, revision=0x2d
[    0.632271] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.632595] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.634203] registered taskstats version 1
[    0.634239] zswap: loaded using pool lzo/zbud
[    0.647438] ima: Allocated hash algorithm: sha256
[    0.792006] rtc_cmos 00:03: setting system clock to 2018-12-09 18:07:43 UTC (1544378863)
[    0.792119] PM: Hibernation image not present or could not be loaded.
[    0.794083] Freeing unused kernel memory: 1420K
[    0.794086] Write protecting the kernel read-only data: 12288k
[    0.795355] Freeing unused kernel memory: 1908K
[    0.802557] Freeing unused kernel memory: 1224K
[    0.816088] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.948618] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.948723] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.948737] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.994129] pps_core: LinuxPPS API ver. 1 registered
[    0.994131] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.994365] PTP clock support registered
[    0.994678] thermal LNXTHERM:00: registered as thermal_zone0
[    0.994679] ACPI: Thermal Zone [THM0] (54 C)
[    0.995904] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.995905] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.995979] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.996031] ACPI: bus type USB registered
[    0.996058] usbcore: registered new interface driver usbfs
[    0.996069] usbcore: registered new interface driver hub
[    0.996087] usbcore: registered new device driver usb
[    0.996572] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.996762] ehci-pci: EHCI PCI platform driver
[    0.996891] sdhci: Secure Digital Host Controller Interface driver
[    0.996892] sdhci: Copyright(c) Pierre Ossman
[    0.997135] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 8)
[    0.998165] thermal LNXTHERM:01: registered as thermal_zone1
[    0.998166] ACPI: Thermal Zone [THM1] (27 C)
[    1.003841] AVX version of gcm_enc/dec engaged.
[    1.003842] AES CTR mode by8 optimization enabled
[    1.010208] SCSI subsystem initialized
[    1.012695] libata version 3.00 loaded.
[    1.013629] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[    1.105455] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.210967] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:c3:ba:30
[    1.210974] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.211054] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.211552] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.211571] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.211610] ehci-pci 0000:00:1a.0: debug port 2
[    1.213069] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.215556] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.215615] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe162f000
[    1.231465] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.231631] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.231636] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.231640] usb usb1: Product: EHCI Host Controller
[    1.231643] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
[    1.231647] usb usb1: SerialNumber: 0000:00:1a.0
[    1.232152] hub 1-0:1.0: USB hub found
[    1.232165] hub 1-0:1.0: 3 ports detected
[    1.232593] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.232611] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.232636] ehci-pci 0000:00:1d.0: debug port 2
[    1.236549] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.236593] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1630000
[    1.251447] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.251585] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.251589] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.251592] usb usb2: Product: EHCI Host Controller
[    1.251594] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd
[    1.251597] usb usb2: SerialNumber: 0000:00:1d.0
[    1.252002] hub 2-0:1.0: USB hub found
[    1.252015] hub 2-0:1.0: 3 ports detected
[    1.252565] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.253682] ahci 0000:00:1f.2: version 3.0
[    1.253975] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.264147] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1f impl SATA mode
[    1.264151] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.265809] scsi host0: ahci
[    1.266077] scsi host1: ahci
[    1.266287] scsi host2: ahci
[    1.266487] scsi host3: ahci
[    1.266677] scsi host4: ahci
[    1.266865] scsi host5: ahci
[    1.266985] ata1: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e100 irq 30
[    1.266989] ata2: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e180 irq 30
[    1.266993] ata3: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e200 irq 30
[    1.266997] ata4: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e280 irq 30
[    1.267001] ata5: SATA max UDMA/133 abar m2048@0xe162e000 port 0xe162e300 irq 30
[    1.267003] ata6: DUMMY
[    1.535457] tsc: Refined TSC clocksource calibration: 2790.934 MHz
[    1.535476] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x283acc80692, max_idle_ns: 440795346123 ns
[    1.559473] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.579483] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.583172] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.586057] ata1.00: ATA-8: ST320LT007-9ZV142, 0004LVM1, max UDMA/133
[    1.586063] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.589488] ata1.00: configured for UDMA/133
[    1.590319] scsi 0:0:0:0: Direct-Access     ATA      ST320LT007-9ZV14 LVM1 PQ: 0 ANSI: 5
[    1.708150] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.708157] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.708859] hub 1-1:1.0: USB hub found
[    1.710169] hub 1-1:1.0: 6 ports detected
[    1.728178] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.728184] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.728852] hub 2-1:1.0: USB hub found
[    1.730279] hub 2-1:1.0: 8 ports detected
[    1.731676] random: fast init done
[    1.820428] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[    1.899162] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[    1.899185] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    1.935454] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.949164] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
[    1.983775] ata2.00: ATA-8: ST9500325ASG, 0009APM1, max UDMA/133
[    1.983781] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.985921] ata2.00: configured for UDMA/133
[    1.986708] scsi 1:0:0:0: Direct-Access     ATA      ST9500325ASG     APM1 PQ: 0 ANSI: 5
[    1.999441] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    2.109236] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[    2.109242] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.109246] usb 1-1.3: Product: Biometric Coprocessor
[    2.109250] usb 1-1.3: Manufacturer: UPEK
[    2.187485] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    2.300452] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    2.300458] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.300462] usb 1-1.4: Product: Broadcom Bluetooth Device
[    2.300466] usb 1-1.4: Manufacturer: Broadcom Corp
[    2.300470] usb 1-1.4: SerialNumber: 402CF4F6A5DE
[    2.331290] ata3: SATA link down (SStatus 0 SControl 300)
[    2.379525] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[    2.494623] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b221
[    2.494630] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.494634] usb 1-1.6: Product: Integrated Camera
[    2.494638] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.559794] clocksource: Switched to clocksource tsc
[    2.647352] ata4: SATA link down (SStatus 0 SControl 300)
[    2.693760] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.941035] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input4
[    2.963220] ata5: SATA link down (SStatus 0 SControl 300)
[    2.968804] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.968812] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.968979] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.969050] sd 0:0:0:0: [sda] Write Protect is off
[    2.969061] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.969138] sd 1:0:0:0: [sdb] Write Protect is off
[    2.969143] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.969147] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.969204] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.009556]  sda: sda1 sda2 < sda5 >
[    3.011132] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.073333]  sdb: sdb1
[    3.074869] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.416814] device-mapper: uevent: version 1.0.3
[    3.416954] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    6.285041] random: crng init done
[    6.285047] random: 7 urandom warning(s) missed due to ratelimiting
[    7.924904] NET: Registered protocol family 38
[    8.827466] PM: Starting manual resume from disk
[    8.827473] PM: Hibernation image partition 254:2 present
[    8.827475] PM: Looking for hibernation image.
[    8.827834] PM: Image not found (code -22)
[    8.827837] PM: Hibernation image not present or could not be loaded.
[    9.174576] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   11.740035] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.989214] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   11.989681] systemd[1]: Detected architecture x86-64.
[   12.008768] systemd[1]: Set hostname to <beaver>.
[   14.270565] systemd[1]: tor.service: Cannot add dependency job, ignoring: Unit tor.service is masked.
[   14.274490] systemd[1]: Created slice User and Session Slice.
[   14.274732] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   14.274954] systemd[1]: Listening on Journal Audit Socket.
[   14.275075] systemd[1]: Listening on udev Control Socket.
[   14.275148] systemd[1]: Listening on fsck to fsckd communication Socket.
[   14.275181] systemd[1]: Reached target User and Group Name Lookups.
[   15.246077] lp: driver loaded but no devices found
[   15.353243] ppdev: user-space parallel port driver
[   15.700551] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[   15.962677] systemd-journald[297]: Received request to flush runtime journal from PID 1
[   15.993219] RPC: Registered named UNIX socket transport module.
[   15.993222] RPC: Registered udp transport module.
[   15.993223] RPC: Registered tcp transport module.
[   15.993224] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   18.295436] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.364065] ACPI: AC Adapter [AC] (off-line)
[   18.375061] ACPI: Battery Slot [BAT0] (battery present)
[   18.375208] ACPI: Battery Slot [BAT1] (battery absent)
[   18.375380] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input5
[   18.375383] ACPI: Sleep Button [SLPB]
[   18.375555] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input6
[   18.375681] ACPI: Lid Switch [LID]
[   18.375797] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[   18.375799] ACPI: Power Button [PWRF]
[   18.417235] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[   18.417242] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.417245] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[   18.417249] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.417250] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[   18.417254] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.417255] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[   18.417259] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   18.417259] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   18.510891] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   18.510941] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   18.578890] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   18.937806] Non-volatile memory driver v1.3
[   19.022711] [drm] Initialized
[   19.323989] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[   19.324513] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[   19.324518] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   19.324523] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[   19.324526] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   19.324529] snd_hda_codec_conexant hdaudioC0D0:    dig-out=0x20/0x22
[   19.324532] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   19.324536] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[   19.324540] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[   19.326103] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   19.452645] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   19.452647] thinkpad_acpi: http://ibm-acpi.sf.net/
[   19.452648] thinkpad_acpi: ThinkPad BIOS CBET4000 4.8-2488-gb1baa980ea, EC 83HT27WW-3.20
[   19.452649] thinkpad_acpi: Lenovo ThinkPad T420, model 4177RVU
[   19.453099] thinkpad_acpi: radio switch found; radios are enabled
[   19.453220] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[   19.453310] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   19.453310] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   19.454956] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[   19.455625] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[   19.457112] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   19.457232] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   19.458970] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10
[   19.629957] Intel(R) Wireless WiFi driver for Linux
[   19.629960] Copyright(c) 2003- 2015 Intel Corporation
[   19.727282] iwlwifi 0000:01:00.0: firmware: direct-loading firmware iwlwifi-6000-4.ucode
[   19.727466] iwlwifi 0000:01:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[   20.011533] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   20.011536] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   20.011538] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   20.011541] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[   20.013586] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   20.142969] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   20.214751] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   20.214754] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   20.214756] RAPL PMU: hw unit of domain package 2^-16 Joules
[   20.214757] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   20.754388] iTCO_vendor_support: vendor-support=0
[   20.845347] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   20.845407] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560)
[   20.845555] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   21.174129] i915: unknown parameter 'i915_enable_rc6' ignored
[   21.174133] i915: unknown parameter 'i915_enable_fbc' ignored
[   21.174136] i915: unknown parameter 'lvds_downclock' ignored
[   21.174893] [drm] Memory usable by graphics device = 2048M
[   21.174895] [drm] Replacing VGA console driver
[   21.175523] Console: switching to colour dummy device 80x25
[   21.234234] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   21.234238] [drm] Driver supports precise vblank timestamp query.
[   21.235012] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   21.516602] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   21.541642] acpi device:0d: registered as cooling_device5
[   21.541759] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[   21.541939] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   21.541948] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[   21.697093] Adding 8151036k swap on /dev/mapper/beaver--vg-swap_1.  Priority:-1 extents:1 across:8151036k FS
[   21.760924] fbcon: inteldrmfb (fb0) is primary device
[   22.107750] Console: switching to colour frame buffer device 200x56
[   22.130211] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   22.150959] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   22.151374] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   22.151426] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   22.151476] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   22.151529] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   22.151577] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   22.151626] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   22.392094] intel_rapl: Found RAPL domain package
[   22.392096] intel_rapl: Found RAPL domain core
[   22.392099] intel_rapl: Found RAPL domain uncore
[   24.071525] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   24.162068] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   25.940765] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30
[   26.049076] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[   26.345844] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30
[   26.454784] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[   26.964413] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30
[   27.019934] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[   27.565460] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30
[   27.704923] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[   28.192885] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30
[   28.317643] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[   28.919865] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30
[   28.990297] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[   29.014165] media: Linux media interface: v0.10
[   29.068920] Linux video capture interface: v2.00
[   29.400946] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b221)
[   29.402320] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[   29.402322] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[   29.402324] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[   29.402412] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18
[   29.402481] usbcore: registered new interface driver uvcvideo
[   29.402481] USB Video Class driver (1.1.1)
[   29.820559] Bluetooth: Core ver 2.22
[   29.820586] NET: Registered protocol family 31
[   29.820587] Bluetooth: HCI device and connection manager initialized
[   29.820594] Bluetooth: HCI socket layer initialized
[   29.820598] Bluetooth: L2CAP socket layer initialized
[   29.820608] Bluetooth: SCO socket layer initialized
[   30.110070] usbcore: registered new interface driver btusb
[   30.240811] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30
[   30.354279] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[   30.856494] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30
[   30.958693] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[   39.296869] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=30
[   39.486299] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[   39.725784] cgroup: new mount options do not match the existing superblock, will be ignored
[   40.291421] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   40.291425] Bluetooth: BNEP filters: protocol multicast
[   40.291433] Bluetooth: BNEP socket layer initialized
[   40.465177] fuse init (API version 7.26)
[   45.769559] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   46.013961] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   46.025881] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   46.028163] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   46.028354] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   46.028459] iwlwifi 0000:01:00.0: Radio type=0x0-0x3-0x1
[   46.261596] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   46.261790] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   46.261896] iwlwifi 0000:01:00.0: Radio type=0x0-0x3-0x1
[   46.346715] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   46.353496] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   46.353686] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   46.353791] iwlwifi 0000:01:00.0: Radio type=0x0-0x3-0x1
[   46.585848] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   46.586043] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   46.586149] iwlwifi 0000:01:00.0: Radio type=0x0-0x3-0x1
[   46.672905] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   47.080370] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   50.149722] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   50.149906] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   50.150008] iwlwifi 0000:01:00.0: Radio type=0x0-0x3-0x1
[   50.381858] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   50.382053] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
[   50.382159] iwlwifi 0000:01:00.0: Radio type=0x0-0x3-0x1
[   50.465192] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   50.527918] wlan0: authenticate with c4:27:95:30:73:d6
[   50.560675] wlan0: send auth to c4:27:95:30:73:d6 (try 1/3)
[   50.563600] wlan0: authenticated
[   50.565639] wlan0: associate with c4:27:95:30:73:d6 (try 1/3)
[   50.569205] wlan0: RX AssocResp from c4:27:95:30:73:d6 (capab=0x411 status=0 aid=2)
[   50.572749] wlan0: associated
[   50.762296] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   66.073254] Bluetooth: RFCOMM TTY layer initialized
[   66.073264] Bluetooth: RFCOMM socket layer initialized
[   66.073277] Bluetooth: RFCOMM ver 1.11
[   96.277882] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[   96.289077] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,data=ordered,commit=0
[   96.352847] EXT4-fs (sda1): re-mounted. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[   96.571652] ata3: SATA link down (SStatus 0 SControl 300)
[   96.896390] ata4: SATA link down (SStatus 0 SControl 300)
[   97.220332] ata5: SATA link down (SStatus 0 SControl 300)