blob: d3fccf1667c08b48b57ba7f57c2bfa0e646fd538 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-53-generic (buildd@lcy01-28) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #74-Ubuntu SMP Fri Dec 2 15:59:10 UTC 2016 (Ubuntu 4.4.0-53.74-generic 4.4.30)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-53-generic root=UUID=13e4067c-63c9-4663-a411-358e0a08b5ea ro splash crashkernel=384M-:128M
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007ff18fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff19000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000037b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: HP HP EliteBook 2760p/HP EliteBook 2760p, BIOS 4.5-913-g72d4a7e 01/29/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x37b600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 080000000 mask FC0000000 uncachable
[ 0.000000] 1 base 0C0000000 mask FF0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7ff19 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[ 0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[ 0.000000] BRK [0x02207000, 0x02207fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3330a000-0x3597cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000007FF300E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000007FF32A60 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000007FF30280 0027DF (v03 COREv4 COREBOOT 20141018 INTL 20160831)
[ 0.000000] ACPI: FACS 0x000000007FF30240 000040
[ 0.000000] ACPI: FACS 0x000000007FF30240 000040
[ 0.000000] ACPI: SSDT 0x000000007FF32B60 0016FA (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000007FF34260 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000007FF342A0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000007FF342E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000007FF34350 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000037b5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x37b5f2000-0x37b5f6fff]
[ 0.000000] Reserving 128MB of memory at 688MB for crashkernel (System RAM: 12208MB)
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000037b5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x000000007ff18fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000037b5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000037b5fffff]
[ 0.000000] On node 0 totalpages: 3125431
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 158 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8109 pages used for memmap
[ 0.000000] DMA32 zone: 518937 pages, LIFO batch:31
[ 0.000000] Normal zone: 40664 pages used for memmap
[ 0.000000] Normal zone: 2602496 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x80a00000-0x829fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ff19000-0x829fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[ 0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88037b200000 s98008 r8192 d28968 u524288
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3076436
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-53-generic root=UUID=13e4067c-63c9-4663-a411-358e0a08b5ea ro splash crashkernel=384M-:128M
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 12048692K/12501724K available (8427K kernel code, 1285K rwdata, 3956K rodata, 1480K init, 1292K bss, 453032K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16640 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.593 MHz processor
[ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.18 BogoMIPS (lpj=9178372)
[ 0.000044] pid_max: default: 32768 minimum: 301
[ 0.000052] ACPI: Core revision 20150930
[ 0.002389] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.002414] Security Framework initialized
[ 0.002419] Yama: becoming mindful.
[ 0.002435] AppArmor: AppArmor initialized
[ 0.003461] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.006883] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008360] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008384] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008633] Initializing cgroup subsys io
[ 0.008640] Initializing cgroup subsys memory
[ 0.008648] Initializing cgroup subsys devices
[ 0.008653] Initializing cgroup subsys freezer
[ 0.008658] Initializing cgroup subsys net_cls
[ 0.008663] Initializing cgroup subsys perf_event
[ 0.008667] Initializing cgroup subsys net_prio
[ 0.008673] Initializing cgroup subsys hugetlb
[ 0.008677] Initializing cgroup subsys pids
[ 0.008701] CPU: Physical Processor ID: 0
[ 0.008705] CPU: Processor Core ID: 0
[ 0.008713] mce: CPU supports 7 MCE banks
[ 0.008727] CPU0: Thermal monitoring enabled (TM1)
[ 0.008737] process: using mwait in idle threads
[ 0.008742] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.008746] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009212] Freeing SMP alternatives memory: 32K (ffffffff820b5000 - ffffffff820bd000)
[ 0.011533] ftrace: allocating 32053 entries in 126 pages
[ 0.028493] smpboot: Max logical packages: 2
[ 0.028500] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.028577] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.029009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068702] TSC deadline timer enabled
[ 0.068705] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.068731] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.068759] ... version: 3
[ 0.068763] ... bit width: 48
[ 0.068766] ... generic registers: 4
[ 0.068770] ... value mask: 0000ffffffffffff
[ 0.068773] ... max period: 0000ffffffffffff
[ 0.068777] ... fixed-purpose events: 3
[ 0.068780] ... event mask: 000000070000000f
[ 0.069623] x86: Booting SMP configuration:
[ 0.069628] .... node #0, CPUs: #1
[ 0.072056] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072157] #2 #3
[ 0.076996] x86: Booted up 1 node, 4 CPUs
[ 0.077005] smpboot: Total of 4 processors activated (18356.74 BogoMIPS)
[ 0.080455] devtmpfs: initialized
[ 0.083681] evm: security.selinux
[ 0.083686] evm: security.SMACK64
[ 0.083689] evm: security.SMACK64EXEC
[ 0.083692] evm: security.SMACK64TRANSMUTE
[ 0.083695] evm: security.SMACK64MMAP
[ 0.083699] evm: security.ima
[ 0.083702] evm: security.capability
[ 0.083854] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.083950] pinctrl core: initialized pinctrl subsystem
[ 0.084069] RTC time: 10:19:48, date: 01/29/17
[ 0.084188] NET: Registered protocol family 16
[ 0.104296] cpuidle: using governor ladder
[ 0.120306] cpuidle: using governor menu
[ 0.120322] PCCT header not found.
[ 0.120445] ACPI: bus type PCI registered
[ 0.120450] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.120524] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.120532] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.120544] PCI: Using configuration type 1 for base access
[ 0.120584] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.132738] ACPI: Added _OSI(Module Device)
[ 0.132743] ACPI: Added _OSI(Processor Device)
[ 0.132747] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.132750] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.134011] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.135214] ACPI: Interpreter enabled
[ 0.135232] ACPI: (supports S0 S3 S4 S5)
[ 0.135236] ACPI: Using IOAPIC for interrupt routing
[ 0.135262] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.137874] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.137884] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.137936] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.137950] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.138006] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[ 0.138156] PCI host bridge to bus 0000:00
[ 0.138161] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.138166] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.138170] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.138177] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.138183] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.138189] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.138196] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.138202] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.138208] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.138215] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.138221] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.138227] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.138234] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.138240] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.138246] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.138253] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[ 0.138259] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.138266] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.138276] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.138368] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.138382] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[ 0.138388] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.138393] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 0.138466] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[ 0.138480] pci 0000:00:04.0: reg 0x10: [mem 0xe1920000-0xe1927fff 64bit]
[ 0.138649] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.138913] pci 0000:00:16.0: reg 0x10: [mem 0xe1930000-0xe193000f 64bit]
[ 0.139498] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.139633] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.139659] pci 0000:00:19.0: reg 0x10: [mem 0xe1900000-0xe191ffff]
[ 0.139669] pci 0000:00:19.0: reg 0x14: [mem 0xe192c000-0xe192cfff]
[ 0.139678] pci 0000:00:19.0: reg 0x18: [io 0x2040-0x205f]
[ 0.139731] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.139799] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.139829] pci 0000:00:1a.0: reg 0x10: [mem 0xe192e000-0xe192e3ff]
[ 0.139905] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.139942] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.139989] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.140017] pci 0000:00:1b.0: reg 0x10: [mem 0xe1928000-0xe192bfff 64bit]
[ 0.140082] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.140121] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.140166] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.140238] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.140321] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.140392] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.140470] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.140548] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.140624] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.140699] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.140782] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.140812] pci 0000:00:1d.0: reg 0x10: [mem 0xe192f000-0xe192f3ff]
[ 0.140887] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.140924] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.140969] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 0.141137] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.141165] pci 0000:00:1f.2: reg 0x10: [io 0x2080-0x2087]
[ 0.141174] pci 0000:00:1f.2: reg 0x14: [io 0x2090-0x2093]
[ 0.141183] pci 0000:00:1f.2: reg 0x18: [io 0x2088-0x208f]
[ 0.141192] pci 0000:00:1f.2: reg 0x1c: [io 0x2094-0x2097]
[ 0.141201] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f]
[ 0.141211] pci 0000:00:1f.2: reg 0x24: [mem 0xe192d000-0xe192d7ff]
[ 0.141248] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.141364] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.141424] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.141527] pci 0000:03:00.0: [197b:2380] type 00 class 0x0c0010
[ 0.141596] pci 0000:03:00.0: reg 0x10: [mem 0xe0810000-0xe08107ff]
[ 0.141620] pci 0000:03:00.0: reg 0x14: [mem 0xe0811000-0xe08110ff]
[ 0.141880] pci 0000:03:00.1: [197b:2392] type 00 class 0x088000
[ 0.141943] pci 0000:03:00.1: reg 0x10: [mem 0xe0812000-0xe08120ff]
[ 0.142054] pci 0000:03:00.1: reg 0x30: [mem 0xe0800000-0xe080ffff pref]
[ 0.142194] pci 0000:03:00.2: [197b:2391] type 00 class 0x080501
[ 0.142260] pci 0000:03:00.2: reg 0x10: [mem 0xe0813000-0xe08130ff]
[ 0.142504] pci 0000:03:00.3: [197b:2393] type 00 class 0x088000
[ 0.142568] pci 0000:03:00.3: reg 0x10: [mem 0xe0814000-0xe08140ff]
[ 0.142817] pci 0000:03:00.4: [197b:2394] type 00 class 0x088000
[ 0.142879] pci 0000:03:00.4: reg 0x10: [mem 0xe0815000-0xe08150ff]
[ 0.148381] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.148400] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.148410] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.148424] pci 0000:00:1c.2: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.148517] pci 0000:04:00.0: [168c:0030] type 00 class 0x028000
[ 0.148592] pci 0000:04:00.0: reg 0x10: [mem 0xe1800000-0xe181ffff 64bit]
[ 0.148686] pci 0000:04:00.0: reg 0x30: [mem 0xe1820000-0xe182ffff pref]
[ 0.148792] pci 0000:04:00.0: supports D1
[ 0.148794] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[ 0.156378] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.156401] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe18fffff]
[ 0.156547] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.156600] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.156649] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.156697] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.156744] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.156794] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.156842] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.156890] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.157110] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.157187] ec: probe of PNP0C09:00 failed with error -22
[ 0.157300] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.157305] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.157313] vgaarb: loaded
[ 0.157317] vgaarb: bridge control possible 0000:00:02.0
[ 0.157565] SCSI subsystem initialized
[ 0.157605] libata version 3.00 loaded.
[ 0.157629] ACPI: bus type USB registered
[ 0.157650] usbcore: registered new interface driver usbfs
[ 0.157661] usbcore: registered new interface driver hub
[ 0.157680] usbcore: registered new device driver usb
[ 0.157827] PCI: Using ACPI for IRQ routing
[ 0.159389] PCI: pci_cache_line_size set to 64 bytes
[ 0.159488] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.159490] e820: reserve RAM buffer [mem 0x7ff19000-0x7fffffff]
[ 0.159492] e820: reserve RAM buffer [mem 0x37b600000-0x37bffffff]
[ 0.159618] NetLabel: Initializing
[ 0.159622] NetLabel: domain hash size = 128
[ 0.159625] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.159641] NetLabel: unlabeled traffic allowed by default
[ 0.159718] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.159727] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.161747] amd_nb: Cannot enumerate AMD northbridges
[ 0.161765] clocksource: Switched to clocksource hpet
[ 0.168070] AppArmor: AppArmor Filesystem Enabled
[ 0.168146] pnp: PnP ACPI init
[ 0.168249] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.168255] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.168259] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.168264] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.168269] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.168273] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.168278] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.168282] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.168287] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[ 0.168292] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[ 0.168299] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.168521] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.168528] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.168570] system 00:02: [io 0x0500-0x057f] could not be reserved
[ 0.168575] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.168580] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.168603] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.168637] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.168665] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.168683] pnp: PnP ACPI: found 6 devices
[ 0.175393] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.175443] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.175459] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.175474] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.175480] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.175489] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.175496] pci 0000:00:1c.2: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.175508] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.175516] pci 0000:00:1c.3: bridge window [mem 0xe1800000-0xe18fffff]
[ 0.175529] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.175531] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.175533] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.175534] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.175536] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.175538] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.175540] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.175542] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.175544] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.175546] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.175547] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.175549] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.175551] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.175553] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.175555] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.175557] pci_bus 0000:00: resource 19 [mem 0x82a00000-0xefffffff window]
[ 0.175558] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.175561] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.175562] pci_bus 0000:03: resource 1 [mem 0xe0000000-0xe08fffff]
[ 0.175564] pci_bus 0000:03: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.175566] pci_bus 0000:04: resource 1 [mem 0xe1800000-0xe18fffff]
[ 0.175599] NET: Registered protocol family 2
[ 0.175787] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.176034] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.176170] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.176210] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.176270] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.176367] NET: Registered protocol family 1
[ 0.176385] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.176900] PCI: CLS 64 bytes, default 64
[ 0.176955] Trying to unpack rootfs image as initramfs...
[ 0.830086] Freeing initrd memory: 39372K (ffff88003330a000 - ffff88003597d000)
[ 0.830114] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.830120] software IO TLB [mem 0x7bf19000-0x7ff19000] (64MB) mapped at [ffff88007bf19000-ffff88007ff18fff]
[ 0.830189] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.830196] hw unit of domain pp0-core 2^-16 Joules
[ 0.830199] hw unit of domain package 2^-16 Joules
[ 0.830203] hw unit of domain pp1-gpu 2^-16 Joules
[ 0.830309] Scanning for low memory corruption every 60 seconds
[ 0.830677] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.830706] audit: initializing netlink subsys (disabled)
[ 0.830723] audit: type=2000 audit(1485685188.824:1): initialized
[ 0.831133] Initialise system trusted keyring
[ 0.831250] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.832813] zbud: loaded
[ 0.833028] VFS: Disk quotas dquot_6.6.0
[ 0.833066] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.833343] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.833587] fuse init (API version 7.23)
[ 0.833725] Key type big_key registered
[ 0.833747] Allocating IMA MOK and blacklist keyrings.
[ 0.834182] Key type asymmetric registered
[ 0.834188] Asymmetric key parser 'x509' registered
[ 0.834230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.834270] io scheduler noop registered
[ 0.834277] io scheduler deadline registered (default)
[ 0.834311] io scheduler cfq registered
[ 0.835037] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.835046] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.835070] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.835078] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.835101] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.835105] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.835110] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 0.835114] pci 0000:03:00.2: Signaling PME through PCIe PME interrupt
[ 0.835118] pci 0000:03:00.3: Signaling PME through PCIe PME interrupt
[ 0.835123] pci 0000:03:00.4: Signaling PME through PCIe PME interrupt
[ 0.835130] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.835153] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.835157] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.835165] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.835171] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.835186] pciehp 0000:00:1c.2:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.835223] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 0.835228] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.835266] intel_idle: MWAIT substates: 0x21120
[ 0.835267] intel_idle: v0.4.1 model 0x2A
[ 0.835269] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.835498] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.835507] ACPI: Power Button [PWRF]
[ 0.835970] GHES: HEST is not enabled!
[ 0.836088] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.837698] Linux agpgart interface v0.103
[ 0.840546] brd: module loaded
[ 0.841760] loop: module loaded
[ 0.842016] libphy: Fixed MDIO Bus: probed
[ 0.842023] tun: Universal TUN/TAP device driver, 1.6
[ 0.842027] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.842076] PPP generic driver version 2.4.2
[ 0.842144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.842152] ehci-pci: EHCI PCI platform driver
[ 0.842287] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.842297] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.842315] ehci-pci 0000:00:1a.0: debug port 2
[ 0.846236] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.846249] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe192e000
[ 0.857842] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.857894] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.857899] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.857905] usb usb1: Product: EHCI Host Controller
[ 0.857909] usb usb1: Manufacturer: Linux 4.4.0-53-generic ehci_hcd
[ 0.857914] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.858043] hub 1-0:1.0: USB hub found
[ 0.858052] hub 1-0:1.0: 3 ports detected
[ 0.858281] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.858289] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.858305] ehci-pci 0000:00:1d.0: debug port 2
[ 0.862197] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.862209] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe192f000
[ 0.873945] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.874046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.874052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.874058] usb usb2: Product: EHCI Host Controller
[ 0.874063] usb usb2: Manufacturer: Linux 4.4.0-53-generic ehci_hcd
[ 0.874067] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.874237] hub 2-0:1.0: USB hub found
[ 0.874247] hub 2-0:1.0: 3 ports detected
[ 0.874407] ehci-platform: EHCI generic platform driver
[ 0.874429] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.874437] ohci-pci: OHCI PCI platform driver
[ 0.874453] ohci-platform: OHCI generic platform driver
[ 0.874466] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.874539] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.601904] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.601924] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.911445] i8042: No controller found
[ 1.911461] tsc: Refined TSC clocksource calibration: 2294.787 MHz
[ 1.911471] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f8b171d, max_idle_ns: 440795241185 ns
[ 1.911611] mousedev: PS/2 mouse device common for all mice
[ 1.911728] rtc_cmos 00:03: RTC can wake from S4
[ 1.911862] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.911895] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.911909] i2c /dev entries driver
[ 1.911968] device-mapper: uevent: version 1.0.3
[ 1.912041] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.912061] Intel P-state driver initializing.
[ 1.912372] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.913407] NET: Registered protocol family 10
[ 1.913880] NET: Registered protocol family 17
[ 1.913951] Key type dns_resolver registered
[ 1.914499] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[ 1.914530] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[ 1.914607] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[ 1.914643] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[ 1.914757] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.915229] registered taskstats version 1
[ 1.915292] Loading compiled-in X.509 certificates
[ 1.918124] Loaded X.509 cert 'Build time autogenerated kernel key: e9dbd2fef92418dc580496786c7b3d419aa7d17d'
[ 1.918146] zswap: loaded using pool lzo/zbud
[ 1.919834] Key type trusted registered
[ 1.922503] Key type encrypted registered
[ 1.922512] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.922518] ima: No TPM chip found, activating TPM-bypass!
[ 1.922543] evm: HMAC attrs: 0x1
[ 1.922975] Magic number: 1:479:326
[ 1.923068] rtc_cmos 00:03: setting system clock to 2017-01-29 10:19:50 UTC (1485685190)
[ 1.923132] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.923135] EDD information not available.
[ 1.923187] PM: Hibernation image not present or could not be loaded.
[ 1.924386] Freeing unused kernel memory: 1480K (ffffffff81f43000 - ffffffff820b5000)
[ 1.924394] Write protecting the kernel read-only data: 14336k
[ 1.924823] Freeing unused kernel memory: 1800K (ffff88000183e000 - ffff880001a00000)
[ 1.925147] Freeing unused kernel memory: 140K (ffff880001ddd000 - ffff880001e00000)
[ 1.934165] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.934238] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.934257] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.934277] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.934794] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.934842] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.935075] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.935129] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.935179] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.935228] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[ 1.955890] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.961553] pps_core: LinuxPPS API ver. 1 registered
[ 1.961560] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.963148] PTP clock support registered
[ 1.966727] [drm] Initialized drm 1.1.0 20060810
[ 1.970111] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.970120] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.970210] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.970821] sdhci: Secure Digital Host Controller Interface driver
[ 1.970829] sdhci: Copyright(c) Pierre Ossman
[ 1.973163] sdhci-pci 0000:03:00.1: SDHCI controller found [197b:2392] (rev 30)
[ 1.973508] sdhci-pci 0000:03:00.1: No vmmc regulator found
[ 1.973517] sdhci-pci 0000:03:00.1: No vqmmc regulator found
[ 1.976762] mmc0: SDHCI controller on PCI [0000:03:00.1] using DMA
[ 1.976792] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2391] (rev 30)
[ 1.977068] sdhci-pci 0000:03:00.2: Refusing to bind to secondary interface.
[ 2.038108] firewire_ohci 0000:03:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[ 2.042789] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.042797] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.042858] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.042862] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.043079] hub 1-1:1.0: USB hub found
[ 2.043116] hub 2-1:1.0: USB hub found
[ 2.043142] hub 1-1:1.0: 6 ports detected
[ 2.043287] hub 2-1:1.0: 8 ports detected
[ 2.240416] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 2.240424] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 2c:27:d7:80:52:26
[ 2.240430] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.240467] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 2.240503] ahci 0000:00:1f.2: version 3.0
[ 2.240716] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.241083] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 2.254088] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
[ 2.254109] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 2.254998] scsi host0: ahci
[ 2.255134] scsi host1: ahci
[ 2.255234] scsi host2: ahci
[ 2.255329] scsi host3: ahci
[ 2.255423] scsi host4: ahci
[ 2.255511] scsi host5: ahci
[ 2.255554] ata1: SATA max UDMA/133 abar m2048@0xe192d000 port 0xe192d100 irq 29
[ 2.255559] ata2: DUMMY
[ 2.255562] ata3: DUMMY
[ 2.255565] ata4: DUMMY
[ 2.255568] ata5: DUMMY
[ 2.255571] ata6: SATA max UDMA/133 abar m2048@0xe192d000 port 0xe192d380 irq 29
[ 2.256319] [drm] Memory usable by graphics device = 2048M
[ 2.256326] [drm] Replacing VGA console driver
[ 2.314058] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.314064] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.315569] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.315574] [drm] Driver supports precise vblank timestamp query.
[ 2.316160] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.348723] fbcon: inteldrmfb (fb0) is primary device
[ 2.348742] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.408094] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c
[ 2.408096] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.408097] usb 1-1.1: SerialNumber: 00b0ea91588a
[ 2.409681] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c52b
[ 2.409686] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.409690] usb 2-1.3: Product: USB Receiver
[ 2.409693] usb 2-1.3: Manufacturer: Logitech
[ 2.413938] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.419985] usbcore: registered new interface driver usbhid
[ 2.419986] usbhid: USB HID core driver
[ 2.422789] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input2
[ 2.482035] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[ 2.538958] firewire_core 0000:03:00.0: created device fw0: GUID ffe473fffffffffe, S400
[ 2.542831] input: Logitech K400 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input1
[ 2.542964] logitech-hidpp-device 0003:046D:4024.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:1d.0-1.3:1
[ 2.578096] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.589849] ata1.00: ATA-9: INTEL SSDSC2BW240A3L, LF1i, max UDMA/133
[ 2.589853] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.599759] ata1.00: configured for UDMA/133
[ 2.600066] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW24 LF1i PQ: 0 ANSI: 5
[ 2.600285] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 2.600315] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.600334] sd 0:0:0:0: [sda] Write Protect is off
[ 2.600337] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.600355] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.601068] sda: sda1 sda2 sda3 sda4
[ 2.601344] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.623662] usb 2-1.4: New USB device found, idVendor=04f2, idProduct=b242
[ 2.623667] usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.623672] usb 2-1.4: Product: HP HD Webcam [Fixed]
[ 2.623675] usb 2-1.4: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.623678] usb 2-1.4: SerialNumber: SN0001
[ 2.910302] clocksource: Switched to clocksource tsc
[ 2.918076] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.017259] Console: switching to colour frame buffer device 160x50
[ 3.019751] acpi device:03: registered as cooling_device4
[ 3.019826] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 3.020320] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 3.032234] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.266033] raid6: sse2x1 gen() 7578 MB/s
[ 3.334041] raid6: sse2x1 xor() 5970 MB/s
[ 3.402046] raid6: sse2x2 gen() 9581 MB/s
[ 3.470052] raid6: sse2x2 xor() 6917 MB/s
[ 3.538057] raid6: sse2x4 gen() 11024 MB/s
[ 3.606057] raid6: sse2x4 xor() 7933 MB/s
[ 3.606060] raid6: using algorithm sse2x4 gen() 11024 MB/s
[ 3.606061] raid6: .... xor() 7933 MB/s, rmw enabled
[ 3.606062] raid6: using ssse3x2 recovery algorithm
[ 3.607156] xor: automatically using best checksumming function:
[ 3.646060] avx : 18811.000 MB/sec
[ 3.659899] Btrfs loaded
[ 3.721963] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.799604] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 3.799726] systemd[1]: Detected architecture x86-64.
[ 3.800637] systemd[1]: Set hostname to <lab1817>.
[ 3.876941] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.877035] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.877093] systemd[1]: Listening on udev Kernel Socket.
[ 3.877159] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.877204] systemd[1]: Listening on Syslog Socket.
[ 3.877299] systemd[1]: Created slice User and Session Slice.
[ 3.877370] systemd[1]: Created slice System Slice.
[ 3.877419] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.877463] systemd[1]: Listening on udev Control Socket.
[ 3.877502] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.877571] systemd[1]: Listening on Journal Audit Socket.
[ 3.877616] systemd[1]: Listening on Journal Socket.
[ 3.890313] systemd[1]: Started Braille Device Support.
[ 3.890987] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.891673] systemd[1]: Started Read required files in advance.
[ 3.893818] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.894490] systemd[1]: Mounting Debug File System...
[ 3.895331] systemd[1]: Starting Journal Service...
[ 3.898793] systemd[1]: Starting Load Kernel Modules...
[ 3.898881] systemd[1]: Reached target Slices.
[ 3.898935] systemd[1]: Reached target User and Group Name Lookups.
[ 3.899501] systemd[1]: Starting Set console keymap...
[ 3.899582] systemd[1]: Reached target Encrypted Volumes.
[ 3.899635] systemd[1]: Reached target Remote File Systems (Pre).
[ 3.899681] systemd[1]: Reached target Remote File Systems.
[ 3.899781] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.899865] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.899932] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.900471] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 3.901128] systemd[1]: Mounting Huge Pages File System...
[ 3.901942] systemd[1]: Starting Uncomplicated firewall...
[ 3.904419] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.904882] systemd[1]: Mounted Debug File System.
[ 3.905368] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.907451] systemd[1]: Started Uncomplicated firewall.
[ 3.912697] systemd[1]: Mounted Huge Pages File System.
[ 3.915377] lp: driver loaded but no devices found
[ 3.919270] ppdev: user-space parallel port driver
[ 3.925600] systemd[1]: Started Load Kernel Modules.
[ 3.938307] systemd[1]: Started Journal Service.
[ 4.029587] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 4.057778] systemd-journald[329]: Received request to flush runtime journal from PID 1
[ 4.159589] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.256286] AVX version of gcm_enc/dec engaged.
[ 4.256290] AES CTR mode by8 optimization enabled
[ 4.312767] ath: phy0: ASPM enabled: 0x43
[ 4.312771] ath: EEPROM regdomain: 0x6a
[ 4.312773] ath: EEPROM indicates we should expect a direct regpair map
[ 4.312776] ath: Country alpha2 being used: 00
[ 4.312777] ath: Regpair used: 0x6a
[ 4.332757] Adding 8191996k swap on /dev/sda3. Priority:-1 extents:1 across:8191996k SSFS
[ 4.374352] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.374751] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90001d00000, irq=19
[ 4.384286] intel_rapl: Found RAPL domain package
[ 4.384290] intel_rapl: Found RAPL domain core
[ 4.384293] intel_rapl: Found RAPL domain uncore
[ 4.402092] audit: type=1400 audit(1485685192.971:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=702 comm="apparmor_parser"
[ 4.407959] audit: type=1400 audit(1485685192.979:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=705 comm="apparmor_parser"
[ 4.411930] audit: type=1400 audit(1485685192.983:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=706 comm="apparmor_parser"
[ 4.411941] audit: type=1400 audit(1485685192.983:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=706 comm="apparmor_parser"
[ 4.411948] audit: type=1400 audit(1485685192.983:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=706 comm="apparmor_parser"
[ 4.414372] audit: type=1400 audit(1485685192.987:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=700 comm="apparmor_parser"
[ 4.414383] audit: type=1400 audit(1485685192.987:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=700 comm="apparmor_parser"
[ 4.414391] audit: type=1400 audit(1485685192.987:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=700 comm="apparmor_parser"
[ 4.414398] audit: type=1400 audit(1485685192.987:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=700 comm="apparmor_parser"
[ 4.466909] media: Linux media interface: v0.10
[ 4.496089] Linux video capture interface: v2.00
[ 4.502359] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[ 4.545283] cgroup: new mount options do not match the existing superblock, will be ignored
[ 4.545776] cfg80211: World regulatory domain updated:
[ 4.545779] cfg80211: DFS Master region: unset
[ 4.545781] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.545783] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.545785] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.545787] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.545790] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.545793] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.545795] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.545797] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.545799] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.583232] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b242)
[ 4.799648] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input3
[ 4.799888] usbcore: registered new interface driver uvcvideo
[ 4.799890] USB Video Class driver (1.1.1)
[ 5.200200] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 5.207668] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 5.210827] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 5.470520] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 5.548728] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 6.182390] mei_me 0000:00:16.0: wait hw ready failed
[ 6.182405] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 6.182443] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 8.182557] mei_me 0000:00:16.0: wait hw ready failed
[ 8.182572] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 8.182618] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 10.182724] mei_me 0000:00:16.0: wait hw ready failed
[ 10.182739] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 10.182745] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 10.182757] mei_me 0000:00:16.0: reset failed ret = -19
[ 10.182758] mei_me 0000:00:16.0: link layer initialization failed.
[ 10.182760] mei_me 0000:00:16.0: init hw failure.
[ 10.182988] mei_me 0000:00:16.0: initialization failed.
[ 10.183118] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20150930/utaddress-254)
[ 10.183124] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.183128] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20150930/utaddress-254)
[ 10.183131] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.183132] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20150930/utaddress-254)
[ 10.183134] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.183135] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20150930/utaddress-254)
[ 10.183138] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.183139] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.201262] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[ 10.201265] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 10.201267] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 10.201269] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 10.201270] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 10.201272] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0xe
[ 10.201274] snd_hda_codec_idt hdaudioC0D0: Mic=0xc
[ 10.201275] snd_hda_codec_idt hdaudioC0D0: Line=0xf
[ 10.237442] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 10.237527] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 10.237601] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 10.237701] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 10.238112] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 12.458420] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 12.463018] vboxdrv: Found 4 processor cores
[ 12.478994] vboxdrv: TSC mode is Invariant, tentative frequency 2294767362 Hz
[ 12.478995] vboxdrv: Successfully loaded version 5.0.24_Ubuntu (interface 0x00240000)
[ 12.484217] VBoxNetFlt: Successfully started.
[ 12.490482] VBoxNetAdp: Successfully started.
[ 12.497911] VBoxPciLinuxInit
[ 12.500889] vboxpci: IOMMU not found (not registered)
[ 14.187656] random: nonblocking pool is initialized
[ 14.209611] logitech-hidpp-device 0003:046D:4024.0004: HID++ 2.0 device connected.
[ 16.243809] wlp4s0: authenticate with ec:26:ca:c0:9f:50
[ 16.251859] wlp4s0: send auth to ec:26:ca:c0:9f:50 (try 1/3)
[ 16.254827] wlp4s0: authenticated
[ 16.259771] wlp4s0: associate with ec:26:ca:c0:9f:50 (try 1/3)
[ 16.265605] wlp4s0: RX AssocResp from ec:26:ca:c0:9f:50 (capab=0x431 status=0 aid=5)
[ 16.265718] wlp4s0: associated
[ 16.265790] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[ 16.269569] ath: EEPROM regdomain: 0x809c
[ 16.269573] ath: EEPROM indicates we should expect a country code
[ 16.269576] ath: doing EEPROM country->regdmn map search
[ 16.269578] ath: country maps to regdmn code: 0x52
[ 16.269579] ath: Country alpha2 being used: CN
[ 16.269581] ath: Regpair used: 0x52
[ 16.269582] ath: regdomain 0x809c dynamically updated by country IE
[ 16.269613] cfg80211: Regulatory domain changed to country: CN
[ 16.269615] cfg80211: DFS Master region: FCC
[ 16.269616] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.269619] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.269622] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[ 16.269626] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 16.269628] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 16.269631] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 16.269633] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 16.269636] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 82.476585] usb 2-1.1: new full-speed USB device number 5 using ehci-pci
[ 82.572195] usb 2-1.1: New USB device found, idVendor=1050, idProduct=0405
[ 82.572206] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 82.572211] usb 2-1.1: Product: Yubikey 4 OTP+CCID
[ 82.572215] usb 2-1.1: Manufacturer: Yubico
[ 82.637443] input: Yubico Yubikey 4 OTP+CCID as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1050:0405.0005/input/input9
[ 82.692930] hid-generic 0003:1050:0405.0005: input,hidraw2: USB HID v1.10 Keyboard [Yubico Yubikey 4 OTP+CCID] on usb-0000:00:1d.0-1.1/input0