[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-53-generic (buildd@lcy01-28) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #74-Ubuntu SMP Fri Dec 2 15:59:10 UTC 2016 (Ubuntu 4.4.0-53.74-generic 4.4.30)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-53-generic root=UUID=13e4067c-63c9-4663-a411-358e0a08b5ea ro splash crashkernel=384M-:128M
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007ff18fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff19000-0x00000000829fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000037b5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: HP HP EliteBook 2760p/HP EliteBook 2760p, BIOS 4.5-913-g72d4a7e 01/29/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x37b600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask FC0000000 uncachable
[    0.000000]   1 base 0C0000000 mask FF0000000 uncachable
[    0.000000]   2 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   3 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7ff19 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[    0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[    0.000000] BRK [0x02207000, 0x02207fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3330a000-0x3597cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FF300E0 000054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FF32A60 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FF30280 0027DF (v03 COREv4 COREBOOT 20141018 INTL 20160831)
[    0.000000] ACPI: FACS 0x000000007FF30240 000040
[    0.000000] ACPI: FACS 0x000000007FF30240 000040
[    0.000000] ACPI: SSDT 0x000000007FF32B60 0016FA (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FF34260 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FF342A0 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FF342E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FF34350 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000037b5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x37b5f2000-0x37b5f6fff]
[    0.000000] Reserving 128MB of memory at 688MB for crashkernel (System RAM: 12208MB)
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000037b5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x000000007ff18fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000037b5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000037b5fffff]
[    0.000000] On node 0 totalpages: 3125431
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 158 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8109 pages used for memmap
[    0.000000]   DMA32 zone: 518937 pages, LIFO batch:31
[    0.000000]   Normal zone: 40664 pages used for memmap
[    0.000000]   Normal zone: 2602496 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x80a00000-0x829fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ff19000-0x829fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[    0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88037b200000 s98008 r8192 d28968 u524288
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3076436
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-53-generic root=UUID=13e4067c-63c9-4663-a411-358e0a08b5ea ro splash crashkernel=384M-:128M
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 12048692K/12501724K available (8427K kernel code, 1285K rwdata, 3956K rodata, 1480K init, 1292K bss, 453032K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:16640 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2294.593 MHz processor
[    0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.18 BogoMIPS (lpj=9178372)
[    0.000044] pid_max: default: 32768 minimum: 301
[    0.000052] ACPI: Core revision 20150930
[    0.002389] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.002414] Security Framework initialized
[    0.002419] Yama: becoming mindful.
[    0.002435] AppArmor: AppArmor initialized
[    0.003461] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.006883] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008360] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008384] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008633] Initializing cgroup subsys io
[    0.008640] Initializing cgroup subsys memory
[    0.008648] Initializing cgroup subsys devices
[    0.008653] Initializing cgroup subsys freezer
[    0.008658] Initializing cgroup subsys net_cls
[    0.008663] Initializing cgroup subsys perf_event
[    0.008667] Initializing cgroup subsys net_prio
[    0.008673] Initializing cgroup subsys hugetlb
[    0.008677] Initializing cgroup subsys pids
[    0.008701] CPU: Physical Processor ID: 0
[    0.008705] CPU: Processor Core ID: 0
[    0.008713] mce: CPU supports 7 MCE banks
[    0.008727] CPU0: Thermal monitoring enabled (TM1)
[    0.008737] process: using mwait in idle threads
[    0.008742] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.008746] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.009212] Freeing SMP alternatives memory: 32K (ffffffff820b5000 - ffffffff820bd000)
[    0.011533] ftrace: allocating 32053 entries in 126 pages
[    0.028493] smpboot: Max logical packages: 2
[    0.028500] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.028577] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.029009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068702] TSC deadline timer enabled
[    0.068705] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.068731] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.068759] ... version:                3
[    0.068763] ... bit width:              48
[    0.068766] ... generic registers:      4
[    0.068770] ... value mask:             0000ffffffffffff
[    0.068773] ... max period:             0000ffffffffffff
[    0.068777] ... fixed-purpose events:   3
[    0.068780] ... event mask:             000000070000000f
[    0.069623] x86: Booting SMP configuration:
[    0.069628] .... node  #0, CPUs:      #1
[    0.072056] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.072157]  #2 #3
[    0.076996] x86: Booted up 1 node, 4 CPUs
[    0.077005] smpboot: Total of 4 processors activated (18356.74 BogoMIPS)
[    0.080455] devtmpfs: initialized
[    0.083681] evm: security.selinux
[    0.083686] evm: security.SMACK64
[    0.083689] evm: security.SMACK64EXEC
[    0.083692] evm: security.SMACK64TRANSMUTE
[    0.083695] evm: security.SMACK64MMAP
[    0.083699] evm: security.ima
[    0.083702] evm: security.capability
[    0.083854] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.083950] pinctrl core: initialized pinctrl subsystem
[    0.084069] RTC time: 10:19:48, date: 01/29/17
[    0.084188] NET: Registered protocol family 16
[    0.104296] cpuidle: using governor ladder
[    0.120306] cpuidle: using governor menu
[    0.120322] PCCT header not found.
[    0.120445] ACPI: bus type PCI registered
[    0.120450] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.120524] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.120532] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.120544] PCI: Using configuration type 1 for base access
[    0.120584] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.132738] ACPI: Added _OSI(Module Device)
[    0.132743] ACPI: Added _OSI(Processor Device)
[    0.132747] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.132750] ACPI: Added _OSI(Processor Aggregator Device)
[    0.134011] ACPI: Executed 1 blocks of module-level executable AML code
[    0.135214] ACPI: Interpreter enabled
[    0.135232] ACPI: (supports S0 S3 S4 S5)
[    0.135236] ACPI: Using IOAPIC for interrupt routing
[    0.135262] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.137874] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.137884] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.137936] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.137950] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.138006] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[    0.138156] PCI host bridge to bus 0000:00
[    0.138161] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.138166] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.138170] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.138177] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.138183] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.138189] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.138196] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.138202] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.138208] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.138215] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.138221] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.138227] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.138234] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.138240] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.138246] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.138253] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[    0.138259] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.138266] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.138276] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.138368] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.138382] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[    0.138388] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.138393] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    0.138466] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[    0.138480] pci 0000:00:04.0: reg 0x10: [mem 0xe1920000-0xe1927fff 64bit]
[    0.138649] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.138913] pci 0000:00:16.0: reg 0x10: [mem 0xe1930000-0xe193000f 64bit]
[    0.139498] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.139633] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.139659] pci 0000:00:19.0: reg 0x10: [mem 0xe1900000-0xe191ffff]
[    0.139669] pci 0000:00:19.0: reg 0x14: [mem 0xe192c000-0xe192cfff]
[    0.139678] pci 0000:00:19.0: reg 0x18: [io  0x2040-0x205f]
[    0.139731] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.139799] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.139829] pci 0000:00:1a.0: reg 0x10: [mem 0xe192e000-0xe192e3ff]
[    0.139905] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.139942] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.139989] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.140017] pci 0000:00:1b.0: reg 0x10: [mem 0xe1928000-0xe192bfff 64bit]
[    0.140082] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.140121] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.140166] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.140238] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.140321] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.140392] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.140470] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[    0.140548] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.140624] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.140699] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.140782] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.140812] pci 0000:00:1d.0: reg 0x10: [mem 0xe192f000-0xe192f3ff]
[    0.140887] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.140924] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.140969] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.141137] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.141165] pci 0000:00:1f.2: reg 0x10: [io  0x2080-0x2087]
[    0.141174] pci 0000:00:1f.2: reg 0x14: [io  0x2090-0x2093]
[    0.141183] pci 0000:00:1f.2: reg 0x18: [io  0x2088-0x208f]
[    0.141192] pci 0000:00:1f.2: reg 0x1c: [io  0x2094-0x2097]
[    0.141201] pci 0000:00:1f.2: reg 0x20: [io  0x2060-0x207f]
[    0.141211] pci 0000:00:1f.2: reg 0x24: [mem 0xe192d000-0xe192d7ff]
[    0.141248] pci 0000:00:1f.2: PME# supported from D3hot
[    0.141364] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.141424] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.141527] pci 0000:03:00.0: [197b:2380] type 00 class 0x0c0010
[    0.141596] pci 0000:03:00.0: reg 0x10: [mem 0xe0810000-0xe08107ff]
[    0.141620] pci 0000:03:00.0: reg 0x14: [mem 0xe0811000-0xe08110ff]
[    0.141880] pci 0000:03:00.1: [197b:2392] type 00 class 0x088000
[    0.141943] pci 0000:03:00.1: reg 0x10: [mem 0xe0812000-0xe08120ff]
[    0.142054] pci 0000:03:00.1: reg 0x30: [mem 0xe0800000-0xe080ffff pref]
[    0.142194] pci 0000:03:00.2: [197b:2391] type 00 class 0x080501
[    0.142260] pci 0000:03:00.2: reg 0x10: [mem 0xe0813000-0xe08130ff]
[    0.142504] pci 0000:03:00.3: [197b:2393] type 00 class 0x088000
[    0.142568] pci 0000:03:00.3: reg 0x10: [mem 0xe0814000-0xe08140ff]
[    0.142817] pci 0000:03:00.4: [197b:2394] type 00 class 0x088000
[    0.142879] pci 0000:03:00.4: reg 0x10: [mem 0xe0815000-0xe08150ff]
[    0.148381] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.148400] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.148410] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.148424] pci 0000:00:1c.2:   bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.148517] pci 0000:04:00.0: [168c:0030] type 00 class 0x028000
[    0.148592] pci 0000:04:00.0: reg 0x10: [mem 0xe1800000-0xe181ffff 64bit]
[    0.148686] pci 0000:04:00.0: reg 0x30: [mem 0xe1820000-0xe182ffff pref]
[    0.148792] pci 0000:04:00.0: supports D1
[    0.148794] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[    0.156378] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.156401] pci 0000:00:1c.3:   bridge window [mem 0xe1800000-0xe18fffff]
[    0.156547] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.156600] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.156649] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.156697] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.156744] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.156794] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.156842] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.156890] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.157110] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.157187] ec: probe of PNP0C09:00 failed with error -22
[    0.157300] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.157305] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.157313] vgaarb: loaded
[    0.157317] vgaarb: bridge control possible 0000:00:02.0
[    0.157565] SCSI subsystem initialized
[    0.157605] libata version 3.00 loaded.
[    0.157629] ACPI: bus type USB registered
[    0.157650] usbcore: registered new interface driver usbfs
[    0.157661] usbcore: registered new interface driver hub
[    0.157680] usbcore: registered new device driver usb
[    0.157827] PCI: Using ACPI for IRQ routing
[    0.159389] PCI: pci_cache_line_size set to 64 bytes
[    0.159488] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.159490] e820: reserve RAM buffer [mem 0x7ff19000-0x7fffffff]
[    0.159492] e820: reserve RAM buffer [mem 0x37b600000-0x37bffffff]
[    0.159618] NetLabel: Initializing
[    0.159622] NetLabel:  domain hash size = 128
[    0.159625] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.159641] NetLabel:  unlabeled traffic allowed by default
[    0.159718] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.159727] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.161747] amd_nb: Cannot enumerate AMD northbridges
[    0.161765] clocksource: Switched to clocksource hpet
[    0.168070] AppArmor: AppArmor Filesystem Enabled
[    0.168146] pnp: PnP ACPI init
[    0.168249] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.168255] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.168259] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.168264] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.168269] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.168273] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.168278] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.168282] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.168287] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.168292] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.168299] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.168521] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.168528] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.168570] system 00:02: [io  0x0500-0x057f] could not be reserved
[    0.168575] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.168580] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.168603] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.168637] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.168665] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.168683] pnp: PnP ACPI: found 6 devices
[    0.175393] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.175443] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.175459] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.175474] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.175480] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.175489] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe08fffff]
[    0.175496] pci 0000:00:1c.2:   bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.175508] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.175516] pci 0000:00:1c.3:   bridge window [mem 0xe1800000-0xe18fffff]
[    0.175529] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.175531] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.175533] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.175534] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.175536] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.175538] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.175540] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.175542] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.175544] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.175546] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.175547] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.175549] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.175551] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.175553] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.175555] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.175557] pci_bus 0000:00: resource 19 [mem 0x82a00000-0xefffffff window]
[    0.175558] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.175561] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.175562] pci_bus 0000:03: resource 1 [mem 0xe0000000-0xe08fffff]
[    0.175564] pci_bus 0000:03: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[    0.175566] pci_bus 0000:04: resource 1 [mem 0xe1800000-0xe18fffff]
[    0.175599] NET: Registered protocol family 2
[    0.175787] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.176034] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.176170] TCP: Hash tables configured (established 131072 bind 65536)
[    0.176210] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.176270] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.176367] NET: Registered protocol family 1
[    0.176385] pci 0000:00:02.0: Video device with shadowed ROM
[    0.176900] PCI: CLS 64 bytes, default 64
[    0.176955] Trying to unpack rootfs image as initramfs...
[    0.830086] Freeing initrd memory: 39372K (ffff88003330a000 - ffff88003597d000)
[    0.830114] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.830120] software IO TLB [mem 0x7bf19000-0x7ff19000] (64MB) mapped at [ffff88007bf19000-ffff88007ff18fff]
[    0.830189] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.830196] hw unit of domain pp0-core 2^-16 Joules
[    0.830199] hw unit of domain package 2^-16 Joules
[    0.830203] hw unit of domain pp1-gpu 2^-16 Joules
[    0.830309] Scanning for low memory corruption every 60 seconds
[    0.830677] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.830706] audit: initializing netlink subsys (disabled)
[    0.830723] audit: type=2000 audit(1485685188.824:1): initialized
[    0.831133] Initialise system trusted keyring
[    0.831250] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.832813] zbud: loaded
[    0.833028] VFS: Disk quotas dquot_6.6.0
[    0.833066] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.833343] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.833587] fuse init (API version 7.23)
[    0.833725] Key type big_key registered
[    0.833747] Allocating IMA MOK and blacklist keyrings.
[    0.834182] Key type asymmetric registered
[    0.834188] Asymmetric key parser 'x509' registered
[    0.834230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.834270] io scheduler noop registered
[    0.834277] io scheduler deadline registered (default)
[    0.834311] io scheduler cfq registered
[    0.835037] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.835046] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.835070] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.835078] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.835101] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.835105] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.835110] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[    0.835114] pci 0000:03:00.2: Signaling PME through PCIe PME interrupt
[    0.835118] pci 0000:03:00.3: Signaling PME through PCIe PME interrupt
[    0.835123] pci 0000:03:00.4: Signaling PME through PCIe PME interrupt
[    0.835130] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.835153] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.835157] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.835165] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.835171] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.835186] pciehp 0000:00:1c.2:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.835223] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[    0.835228] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.835266] intel_idle: MWAIT substates: 0x21120
[    0.835267] intel_idle: v0.4.1 model 0x2A
[    0.835269] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.835498] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.835507] ACPI: Power Button [PWRF]
[    0.835970] GHES: HEST is not enabled!
[    0.836088] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.837698] Linux agpgart interface v0.103
[    0.840546] brd: module loaded
[    0.841760] loop: module loaded
[    0.842016] libphy: Fixed MDIO Bus: probed
[    0.842023] tun: Universal TUN/TAP device driver, 1.6
[    0.842027] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.842076] PPP generic driver version 2.4.2
[    0.842144] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.842152] ehci-pci: EHCI PCI platform driver
[    0.842287] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.842297] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.842315] ehci-pci 0000:00:1a.0: debug port 2
[    0.846236] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.846249] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe192e000
[    0.857842] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.857894] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.857899] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.857905] usb usb1: Product: EHCI Host Controller
[    0.857909] usb usb1: Manufacturer: Linux 4.4.0-53-generic ehci_hcd
[    0.857914] usb usb1: SerialNumber: 0000:00:1a.0
[    0.858043] hub 1-0:1.0: USB hub found
[    0.858052] hub 1-0:1.0: 3 ports detected
[    0.858281] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.858289] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.858305] ehci-pci 0000:00:1d.0: debug port 2
[    0.862197] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.862209] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe192f000
[    0.873945] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.874046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.874052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.874058] usb usb2: Product: EHCI Host Controller
[    0.874063] usb usb2: Manufacturer: Linux 4.4.0-53-generic ehci_hcd
[    0.874067] usb usb2: SerialNumber: 0000:00:1d.0
[    0.874237] hub 2-0:1.0: USB hub found
[    0.874247] hub 2-0:1.0: 3 ports detected
[    0.874407] ehci-platform: EHCI generic platform driver
[    0.874429] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.874437] ohci-pci: OHCI PCI platform driver
[    0.874453] ohci-platform: OHCI generic platform driver
[    0.874466] uhci_hcd: USB Universal Host Controller Interface driver
[    0.874539] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.601904] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.601924] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.911445] i8042: No controller found
[    1.911461] tsc: Refined TSC clocksource calibration: 2294.787 MHz
[    1.911471] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f8b171d, max_idle_ns: 440795241185 ns
[    1.911611] mousedev: PS/2 mouse device common for all mice
[    1.911728] rtc_cmos 00:03: RTC can wake from S4
[    1.911862] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.911895] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.911909] i2c /dev entries driver
[    1.911968] device-mapper: uevent: version 1.0.3
[    1.912041] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.912061] Intel P-state driver initializing.
[    1.912372] ledtrig-cpu: registered to indicate activity on CPUs
[    1.913407] NET: Registered protocol family 10
[    1.913880] NET: Registered protocol family 17
[    1.913951] Key type dns_resolver registered
[    1.914499] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    1.914530] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    1.914607] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[    1.914643] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[    1.914757] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.915229] registered taskstats version 1
[    1.915292] Loading compiled-in X.509 certificates
[    1.918124] Loaded X.509 cert 'Build time autogenerated kernel key: e9dbd2fef92418dc580496786c7b3d419aa7d17d'
[    1.918146] zswap: loaded using pool lzo/zbud
[    1.919834] Key type trusted registered
[    1.922503] Key type encrypted registered
[    1.922512] AppArmor: AppArmor sha1 policy hashing enabled
[    1.922518] ima: No TPM chip found, activating TPM-bypass!
[    1.922543] evm: HMAC attrs: 0x1
[    1.922975]   Magic number: 1:479:326
[    1.923068] rtc_cmos 00:03: setting system clock to 2017-01-29 10:19:50 UTC (1485685190)
[    1.923132] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.923135] EDD information not available.
[    1.923187] PM: Hibernation image not present or could not be loaded.
[    1.924386] Freeing unused kernel memory: 1480K (ffffffff81f43000 - ffffffff820b5000)
[    1.924394] Write protecting the kernel read-only data: 14336k
[    1.924823] Freeing unused kernel memory: 1800K (ffff88000183e000 - ffff880001a00000)
[    1.925147] Freeing unused kernel memory: 140K (ffff880001ddd000 - ffff880001e00000)
[    1.934165] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.934238] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.934257] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.934277] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.934794] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.934842] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.935075] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.935129] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.935179] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.935228] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    1.955890] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.961553] pps_core: LinuxPPS API ver. 1 registered
[    1.961560] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.963148] PTP clock support registered
[    1.966727] [drm] Initialized drm 1.1.0 20060810
[    1.970111] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.970120] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.970210] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.970821] sdhci: Secure Digital Host Controller Interface driver
[    1.970829] sdhci: Copyright(c) Pierre Ossman
[    1.973163] sdhci-pci 0000:03:00.1: SDHCI controller found [197b:2392] (rev 30)
[    1.973508] sdhci-pci 0000:03:00.1: No vmmc regulator found
[    1.973517] sdhci-pci 0000:03:00.1: No vqmmc regulator found
[    1.976762] mmc0: SDHCI controller on PCI [0000:03:00.1] using DMA
[    1.976792] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2391] (rev 30)
[    1.977068] sdhci-pci 0000:03:00.2: Refusing to bind to secondary interface.
[    2.038108] firewire_ohci 0000:03:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[    2.042789] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.042797] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.042858] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.042862] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.043079] hub 1-1:1.0: USB hub found
[    2.043116] hub 2-1:1.0: USB hub found
[    2.043142] hub 1-1:1.0: 6 ports detected
[    2.043287] hub 2-1:1.0: 8 ports detected
[    2.240416] e1000e 0000:00:19.0 eth0: registered PHC clock
[    2.240424] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 2c:27:d7:80:52:26
[    2.240430] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.240467] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    2.240503] ahci 0000:00:1f.2: version 3.0
[    2.240716] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.241083] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    2.254088] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
[    2.254109] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    2.254998] scsi host0: ahci
[    2.255134] scsi host1: ahci
[    2.255234] scsi host2: ahci
[    2.255329] scsi host3: ahci
[    2.255423] scsi host4: ahci
[    2.255511] scsi host5: ahci
[    2.255554] ata1: SATA max UDMA/133 abar m2048@0xe192d000 port 0xe192d100 irq 29
[    2.255559] ata2: DUMMY
[    2.255562] ata3: DUMMY
[    2.255565] ata4: DUMMY
[    2.255568] ata5: DUMMY
[    2.255571] ata6: SATA max UDMA/133 abar m2048@0xe192d000 port 0xe192d380 irq 29
[    2.256319] [drm] Memory usable by graphics device = 2048M
[    2.256326] [drm] Replacing VGA console driver
[    2.314058] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    2.314064] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    2.315569] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.315574] [drm] Driver supports precise vblank timestamp query.
[    2.316160] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.348723] fbcon: inteldrmfb (fb0) is primary device
[    2.348742] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.408094] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c
[    2.408096] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.408097] usb 1-1.1: SerialNumber: 00b0ea91588a
[    2.409681] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c52b
[    2.409686] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.409690] usb 2-1.3: Product: USB Receiver
[    2.409693] usb 2-1.3: Manufacturer: Logitech
[    2.413938] hidraw: raw HID events driver (C) Jiri Kosina
[    2.419985] usbcore: registered new interface driver usbhid
[    2.419986] usbhid: USB HID core driver
[    2.422789] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input2
[    2.482035] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[    2.538958] firewire_core 0000:03:00.0: created device fw0: GUID ffe473fffffffffe, S400
[    2.542831] input: Logitech K400 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input1
[    2.542964] logitech-hidpp-device 0003:046D:4024.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:00:1d.0-1.3:1
[    2.578096] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.589849] ata1.00: ATA-9: INTEL SSDSC2BW240A3L, LF1i, max UDMA/133
[    2.589853] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.599759] ata1.00: configured for UDMA/133
[    2.600066] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2BW24 LF1i PQ: 0 ANSI: 5
[    2.600285] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    2.600315] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.600334] sd 0:0:0:0: [sda] Write Protect is off
[    2.600337] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.600355] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.601068]  sda: sda1 sda2 sda3 sda4
[    2.601344] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.623662] usb 2-1.4: New USB device found, idVendor=04f2, idProduct=b242
[    2.623667] usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.623672] usb 2-1.4: Product: HP HD Webcam [Fixed]
[    2.623675] usb 2-1.4: Manufacturer: Chicony Electronics Co., Ltd.
[    2.623678] usb 2-1.4: SerialNumber: SN0001
[    2.910302] clocksource: Switched to clocksource tsc
[    2.918076] ata6: SATA link down (SStatus 0 SControl 300)
[    3.017259] Console: switching to colour frame buffer device 160x50
[    3.019751] acpi device:03: registered as cooling_device4
[    3.019826] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    3.020320] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    3.032234] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.266033] raid6: sse2x1   gen()  7578 MB/s
[    3.334041] raid6: sse2x1   xor()  5970 MB/s
[    3.402046] raid6: sse2x2   gen()  9581 MB/s
[    3.470052] raid6: sse2x2   xor()  6917 MB/s
[    3.538057] raid6: sse2x4   gen() 11024 MB/s
[    3.606057] raid6: sse2x4   xor()  7933 MB/s
[    3.606060] raid6: using algorithm sse2x4 gen() 11024 MB/s
[    3.606061] raid6: .... xor() 7933 MB/s, rmw enabled
[    3.606062] raid6: using ssse3x2 recovery algorithm
[    3.607156] xor: automatically using best checksumming function:
[    3.646060]    avx       : 18811.000 MB/sec
[    3.659899] Btrfs loaded
[    3.721963] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    3.799604] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.799726] systemd[1]: Detected architecture x86-64.
[    3.800637] systemd[1]: Set hostname to <lab1817>.
[    3.876941] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.877035] systemd[1]: Listening on LVM2 poll daemon socket.
[    3.877093] systemd[1]: Listening on udev Kernel Socket.
[    3.877159] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.877204] systemd[1]: Listening on Syslog Socket.
[    3.877299] systemd[1]: Created slice User and Session Slice.
[    3.877370] systemd[1]: Created slice System Slice.
[    3.877419] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.877463] systemd[1]: Listening on udev Control Socket.
[    3.877502] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.877571] systemd[1]: Listening on Journal Audit Socket.
[    3.877616] systemd[1]: Listening on Journal Socket.
[    3.890313] systemd[1]: Started Braille Device Support.
[    3.890987] systemd[1]: Mounting POSIX Message Queue File System...
[    3.891673] systemd[1]: Started Read required files in advance.
[    3.893818] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.894490] systemd[1]: Mounting Debug File System...
[    3.895331] systemd[1]: Starting Journal Service...
[    3.898793] systemd[1]: Starting Load Kernel Modules...
[    3.898881] systemd[1]: Reached target Slices.
[    3.898935] systemd[1]: Reached target User and Group Name Lookups.
[    3.899501] systemd[1]: Starting Set console keymap...
[    3.899582] systemd[1]: Reached target Encrypted Volumes.
[    3.899635] systemd[1]: Reached target Remote File Systems (Pre).
[    3.899681] systemd[1]: Reached target Remote File Systems.
[    3.899781] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.899865] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.899932] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.900471] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    3.901128] systemd[1]: Mounting Huge Pages File System...
[    3.901942] systemd[1]: Starting Uncomplicated firewall...
[    3.904419] systemd[1]: Mounted POSIX Message Queue File System.
[    3.904882] systemd[1]: Mounted Debug File System.
[    3.905368] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.907451] systemd[1]: Started Uncomplicated firewall.
[    3.912697] systemd[1]: Mounted Huge Pages File System.
[    3.915377] lp: driver loaded but no devices found
[    3.919270] ppdev: user-space parallel port driver
[    3.925600] systemd[1]: Started Load Kernel Modules.
[    3.938307] systemd[1]: Started Journal Service.
[    4.029587] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[    4.057778] systemd-journald[329]: Received request to flush runtime journal from PID 1
[    4.159589] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.256286] AVX version of gcm_enc/dec engaged.
[    4.256290] AES CTR mode by8 optimization enabled
[    4.312767] ath: phy0: ASPM enabled: 0x43
[    4.312771] ath: EEPROM regdomain: 0x6a
[    4.312773] ath: EEPROM indicates we should expect a direct regpair map
[    4.312776] ath: Country alpha2 being used: 00
[    4.312777] ath: Regpair used: 0x6a
[    4.332757] Adding 8191996k swap on /dev/sda3.  Priority:-1 extents:1 across:8191996k SSFS
[    4.374352] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.374751] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90001d00000, irq=19
[    4.384286] intel_rapl: Found RAPL domain package
[    4.384290] intel_rapl: Found RAPL domain core
[    4.384293] intel_rapl: Found RAPL domain uncore
[    4.402092] audit: type=1400 audit(1485685192.971:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=702 comm="apparmor_parser"
[    4.407959] audit: type=1400 audit(1485685192.979:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=705 comm="apparmor_parser"
[    4.411930] audit: type=1400 audit(1485685192.983:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=706 comm="apparmor_parser"
[    4.411941] audit: type=1400 audit(1485685192.983:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=706 comm="apparmor_parser"
[    4.411948] audit: type=1400 audit(1485685192.983:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=706 comm="apparmor_parser"
[    4.414372] audit: type=1400 audit(1485685192.987:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=700 comm="apparmor_parser"
[    4.414383] audit: type=1400 audit(1485685192.987:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=700 comm="apparmor_parser"
[    4.414391] audit: type=1400 audit(1485685192.987:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=700 comm="apparmor_parser"
[    4.414398] audit: type=1400 audit(1485685192.987:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=700 comm="apparmor_parser"
[    4.466909] media: Linux media interface: v0.10
[    4.496089] Linux video capture interface: v2.00
[    4.502359] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[    4.545283] cgroup: new mount options do not match the existing superblock, will be ignored
[    4.545776] cfg80211: World regulatory domain updated:
[    4.545779] cfg80211:  DFS Master region: unset
[    4.545781] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    4.545783] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.545785] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.545787] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    4.545790] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    4.545793] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    4.545795] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    4.545797] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    4.545799] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    4.583232] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b242)
[    4.799648] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input3
[    4.799888] usbcore: registered new interface driver uvcvideo
[    4.799890] USB Video Class driver (1.1.1)
[    5.200200] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    5.207668] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    5.210827] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.470520] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.548728] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[    6.182390] mei_me 0000:00:16.0: wait hw ready failed
[    6.182405] mei_me 0000:00:16.0: hw_start failed ret = -62
[    6.182443] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[    8.182557] mei_me 0000:00:16.0: wait hw ready failed
[    8.182572] mei_me 0000:00:16.0: hw_start failed ret = -62
[    8.182618] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[   10.182724] mei_me 0000:00:16.0: wait hw ready failed
[   10.182739] mei_me 0000:00:16.0: hw_start failed ret = -62
[   10.182745] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[   10.182757] mei_me 0000:00:16.0: reset failed ret = -19
[   10.182758] mei_me 0000:00:16.0: link layer initialization failed.
[   10.182760] mei_me 0000:00:16.0: init hw failure.
[   10.182988] mei_me 0000:00:16.0: initialization failed.
[   10.183118] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20150930/utaddress-254)
[   10.183124] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.183128] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20150930/utaddress-254)
[   10.183131] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.183132] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20150930/utaddress-254)
[   10.183134] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.183135] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20150930/utaddress-254)
[   10.183138] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.183139] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.201262] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[   10.201265] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[   10.201267] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   10.201269] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   10.201270] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   10.201272] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0xe
[   10.201274] snd_hda_codec_idt hdaudioC0D0:      Mic=0xc
[   10.201275] snd_hda_codec_idt hdaudioC0D0:      Line=0xf
[   10.237442] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   10.237527] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   10.237601] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   10.237701] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   10.238112] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   12.458420] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   12.463018] vboxdrv: Found 4 processor cores
[   12.478994] vboxdrv: TSC mode is Invariant, tentative frequency 2294767362 Hz
[   12.478995] vboxdrv: Successfully loaded version 5.0.24_Ubuntu (interface 0x00240000)
[   12.484217] VBoxNetFlt: Successfully started.
[   12.490482] VBoxNetAdp: Successfully started.
[   12.497911] VBoxPciLinuxInit
[   12.500889] vboxpci: IOMMU not found (not registered)
[   14.187656] random: nonblocking pool is initialized
[   14.209611] logitech-hidpp-device 0003:046D:4024.0004: HID++ 2.0 device connected.
[   16.243809] wlp4s0: authenticate with ec:26:ca:c0:9f:50
[   16.251859] wlp4s0: send auth to ec:26:ca:c0:9f:50 (try 1/3)
[   16.254827] wlp4s0: authenticated
[   16.259771] wlp4s0: associate with ec:26:ca:c0:9f:50 (try 1/3)
[   16.265605] wlp4s0: RX AssocResp from ec:26:ca:c0:9f:50 (capab=0x431 status=0 aid=5)
[   16.265718] wlp4s0: associated
[   16.265790] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   16.269569] ath: EEPROM regdomain: 0x809c
[   16.269573] ath: EEPROM indicates we should expect a country code
[   16.269576] ath: doing EEPROM country->regdmn map search
[   16.269578] ath: country maps to regdmn code: 0x52
[   16.269579] ath: Country alpha2 being used: CN
[   16.269581] ath: Regpair used: 0x52
[   16.269582] ath: regdomain 0x809c dynamically updated by country IE
[   16.269613] cfg80211: Regulatory domain changed to country: CN
[   16.269615] cfg80211:  DFS Master region: FCC
[   16.269616] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   16.269619] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   16.269622] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[   16.269626] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[   16.269628] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   16.269631] cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[   16.269633] cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[   16.269636] cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[   82.476585] usb 2-1.1: new full-speed USB device number 5 using ehci-pci
[   82.572195] usb 2-1.1: New USB device found, idVendor=1050, idProduct=0405
[   82.572206] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   82.572211] usb 2-1.1: Product: Yubikey 4 OTP+CCID
[   82.572215] usb 2-1.1: Manufacturer: Yubico
[   82.637443] input: Yubico Yubikey 4 OTP+CCID as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1050:0405.0005/input/input9
[   82.692930] hid-generic 0003:1050:0405.0005: input,hidraw2: USB HID v1.10 Keyboard [Yubico Yubikey 4 OTP+CCID] on usb-0000:00:1d.0-1.1/input0