| [ 0.000000] Linux version 5.1.0-rc7-00001-gda5191c9a055 (martin@laptop) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #55 SMP Mon Apr 29 05:26:32 CEST 2019 |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-rc7-00001-gda5191c9a055 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff1ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff20000-0x00000000c29fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043d5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: LENOVO 232566G/232566G, BIOS CBET4000 4.9-1485-g139b3cef03-dirty 05/02/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2893.312 MHz processor |
| [ 0.001001] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.001002] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.001006] last_pfn = 0x43d600 max_arch_pfn = 0x400000000 |
| [ 0.001009] MTRR default type: write-back |
| [ 0.001010] MTRR fixed ranges enabled: |
| [ 0.001011] 00000-9FFFF write-back |
| [ 0.001012] A0000-BFFFF uncachable |
| [ 0.001012] C0000-FFFFF write-back |
| [ 0.001013] MTRR variable ranges enabled: |
| [ 0.001014] 0 base 0C0000000 mask FF0000000 uncachable |
| [ 0.001015] 1 base 0D0000000 mask FF0000000 write-combining |
| [ 0.001015] 2 base 0E0000000 mask FE0000000 uncachable |
| [ 0.001016] 3 disabled |
| [ 0.001016] 4 disabled |
| [ 0.001017] 5 disabled |
| [ 0.001017] 6 disabled |
| [ 0.001017] 7 disabled |
| [ 0.001018] 8 disabled |
| [ 0.001018] 9 disabled |
| [ 0.001778] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.002142] last_pfn = 0xbff20 max_arch_pfn = 0x400000000 |
| [ 0.011815] BRK [0x10c001000, 0x10c001fff] PGTABLE |
| [ 0.011817] BRK [0x10c002000, 0x10c002fff] PGTABLE |
| [ 0.011818] BRK [0x10c003000, 0x10c003fff] PGTABLE |
| [ 0.011848] BRK [0x10c004000, 0x10c004fff] PGTABLE |
| [ 0.011850] BRK [0x10c005000, 0x10c005fff] PGTABLE |
| [ 0.011941] BRK [0x10c006000, 0x10c006fff] PGTABLE |
| [ 0.011951] BRK [0x10c007000, 0x10c007fff] PGTABLE |
| [ 0.011974] BRK [0x10c008000, 0x10c008fff] PGTABLE |
| [ 0.012131] RAMDISK: [mem 0x35449000-0x36a1bfff] |
| [ 0.012136] ACPI: Early table checksum verification disabled |
| [ 0.012190] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4) |
| [ 0.012193] ACPI: XSDT 0x00000000BFF440E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20180810) |
| [ 0.012198] ACPI: FACP 0x00000000BFF47B20 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20180810) |
| [ 0.012203] ACPI: DSDT 0x00000000BFF44280 00389F (v02 COREv4 COREBOOT 20110725 INTL 20180810) |
| [ 0.012205] ACPI: FACS 0x00000000BFF44240 000040 |
| [ 0.012207] ACPI: FACS 0x00000000BFF44240 000040 |
| [ 0.012210] ACPI: SSDT 0x00000000BFF47C20 001A8B (v02 COREv4 COREBOOT 0000002A CORE 20180810) |
| [ 0.012212] ACPI: MCFG 0x00000000BFF496B0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20180810) |
| [ 0.012215] ACPI: TCPA 0x00000000BFF496F0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20180810) |
| [ 0.012217] ACPI: APIC 0x00000000BFF49730 00006C (v02 COREv4 COREBOOT 00000000 CORE 20180810) |
| [ 0.012220] ACPI: DMAR 0x00000000BFF497A0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20180810) |
| [ 0.012222] ACPI: HPET 0x00000000BFF4B870 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180810) |
| [ 0.012228] ACPI: Local APIC address 0xfee00000 |
| [ 0.012304] No NUMA configuration found |
| [ 0.012305] Faking a node at [mem 0x0000000000000000-0x000000043d5fffff] |
| [ 0.012309] NODE_DATA(0) allocated [mem 0x43d5ef000-0x43d5f3fff] |
| [ 0.012337] Zone ranges: |
| [ 0.012338] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.012339] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.012340] Normal [mem 0x0000000100000000-0x000000043d5fffff] |
| [ 0.012341] Device empty |
| [ 0.012342] Movable zone start for each node |
| [ 0.012343] Early memory node ranges |
| [ 0.012344] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.012345] node 0: [mem 0x0000000000100000-0x00000000bff1ffff] |
| [ 0.012346] node 0: [mem 0x0000000100000000-0x000000043d5fffff] |
| [ 0.012354] Zeroed struct page in unavailable ranges: 322 pages |
| [ 0.012355] Initmem setup node 0 [mem 0x0000000000001000-0x000000043d5fffff] |
| [ 0.012357] On node 0 totalpages: 4183230 |
| [ 0.012358] DMA zone: 64 pages used for memmap |
| [ 0.012358] DMA zone: 21 pages reserved |
| [ 0.012359] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.012453] DMA32 zone: 12221 pages used for memmap |
| [ 0.012454] DMA32 zone: 782112 pages, LIFO batch:63 |
| [ 0.031021] Normal zone: 53080 pages used for memmap |
| [ 0.031023] Normal zone: 3397120 pages, LIFO batch:63 |
| [ 0.107914] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff] |
| [ 0.108110] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.108112] ACPI: Local APIC address 0xfee00000 |
| [ 0.108127] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.108130] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.108131] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.108133] ACPI: IRQ0 used by override. |
| [ 0.108134] ACPI: IRQ9 used by override. |
| [ 0.108136] Using ACPI (MADT) for SMP configuration information |
| [ 0.108138] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.108143] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.108153] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.108155] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.108155] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.108156] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.108158] PM: Registered nosave memory: [mem 0xbff20000-0xc29fffff] |
| [ 0.108158] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff] |
| [ 0.108159] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.108160] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.108160] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.108161] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.108162] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.108163] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.108164] [mem 0xc2a00000-0xefffffff] available for PCI devices |
| [ 0.108165] Booting paravirtualized kernel on bare hardware |
| [ 0.108168] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.202646] random: get_random_bytes called from start_kernel+0x95/0x4b6 with crng_init=0 |
| [ 0.202652] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.202823] percpu: Embedded 44 pages/cpu s142744 r8192 d29288 u524288 |
| [ 0.202829] pcpu-alloc: s142744 r8192 d29288 u524288 alloc=1*2097152 |
| [ 0.202830] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.202847] Built 1 zonelists, mobility grouping on. Total pages: 4117844 |
| [ 0.202847] Policy zone: Normal |
| [ 0.202849] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-rc7-00001-gda5191c9a055 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed |
| [ 0.206356] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.206362] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.248652] Memory: 16356840K/16732920K available (10243K kernel code, 1173K rwdata, 3140K rodata, 1604K init, 2356K bss, 376080K reserved, 0K cma-reserved) |
| [ 0.248735] Kernel/User page tables isolation: enabled |
| [ 0.248749] ftrace: allocating 31682 entries in 124 pages |
| [ 0.260032] rcu: Hierarchical RCU implementation. |
| [ 0.260033] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.260035] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.260035] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.262944] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.263545] Console: colour dummy device 80x25 |
| [ 0.263653] printk: console [tty0] enabled |
| [ 0.263669] ACPI: Core revision 20190215 |
| [ 0.263814] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.263827] hpet clockevent registered |
| [ 0.263832] APIC: Switch to symmetric I/O mode setup |
| [ 0.263834] DMAR: Host address width 36 |
| [ 0.263836] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.263841] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.263844] DMAR: RMRR base: 0x000000c0800000 end: 0x000000c29fffff |
| [ 0.263846] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.263850] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.263853] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.263855] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.263856] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.264283] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.264286] x2apic enabled |
| [ 0.264292] Switched APIC routing to cluster x2apic. |
| [ 0.264740] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.283833] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b494ed163, max_idle_ns: 440795232905 ns |
| [ 0.283847] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.62 BogoMIPS (lpj=11573248) |
| [ 0.283851] pid_max: default: 32768 minimum: 301 |
| [ 0.283893] LSM: Security Framework initializing |
| [ 0.283905] Yama: becoming mindful. |
| [ 0.283913] SELinux: Initializing. |
| [ 0.283928] *** VALIDATE SELinux *** |
| [ 0.283930] TOMOYO Linux initialized |
| [ 0.286288] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.287482] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.287543] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.287582] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.287732] *** VALIDATE proc *** |
| [ 0.287776] *** VALIDATE cgroup1 *** |
| [ 0.287779] *** VALIDATE cgroup2 *** |
| [ 0.287807] mce: CPU supports 7 MCE banks |
| [ 0.287817] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.287825] process: using mwait in idle threads |
| [ 0.287828] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.287830] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.287842] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.287844] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.287846] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.287854] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.287857] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.287859] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.288011] Freeing SMP alternatives memory: 28K |
| [ 0.289601] TSC deadline timer enabled |
| [ 0.289604] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.289694] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.289714] ... version: 3 |
| [ 0.289716] ... bit width: 48 |
| [ 0.289717] ... generic registers: 4 |
| [ 0.289718] ... value mask: 0000ffffffffffff |
| [ 0.289720] ... max period: 00007fffffffffff |
| [ 0.289721] ... fixed-purpose events: 3 |
| [ 0.289723] ... event mask: 000000070000000f |
| [ 0.289757] rcu: Hierarchical SRCU implementation. |
| [ 0.290249] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.290292] smp: Bringing up secondary CPUs ... |
| [ 0.290374] x86: Booting SMP configuration: |
| [ 0.290376] .... node #0, CPUs: #1 #2 #3 |
| [ 0.294268] smp: Brought up 1 node, 4 CPUs |
| [ 0.294268] smpboot: Max logical packages: 1 |
| [ 0.294268] smpboot: Total of 4 processors activated (23146.49 BogoMIPS) |
| [ 0.296226] devtmpfs: initialized |
| [ 0.296226] x86/mm: Memory block size: 128MB |
| [ 0.297050] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.297050] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.297050] pinctrl core: initialized pinctrl subsystem |
| [ 0.297050] NET: Registered protocol family 16 |
| [ 0.297050] audit: initializing netlink subsys (disabled) |
| [ 0.297050] audit: type=2000 audit(1556776295.032:1): state=initialized audit_enabled=0 res=1 |
| [ 0.297050] cpuidle: using governor ladder |
| [ 0.297050] cpuidle: using governor menu |
| [ 0.297050] ACPI: bus type PCI registered |
| [ 0.297050] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.297050] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.297050] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.297050] PCI: Using configuration type 1 for base access |
| [ 0.297050] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.297050] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.297050] ACPI: Added _OSI(Module Device) |
| [ 0.297050] ACPI: Added _OSI(Processor Device) |
| [ 0.297050] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.297050] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.297050] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.297050] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.297050] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.301606] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.302469] ACPI: EC: EC started |
| [ 0.302471] ACPI: EC: interrupt blocked |
| [ 0.302747] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.302749] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.302752] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions |
| [ 0.302754] ACPI: Interpreter enabled |
| [ 0.302769] ACPI: (supports S0 S3 S4 S5) |
| [ 0.302771] ACPI: Using IOAPIC for interrupt routing |
| [ 0.302788] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.302909] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.306213] ACPI: Power Resource [FPWR] (off) |
| [ 0.306482] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.306487] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.306530] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR] |
| [ 0.306539] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.306585] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff]) |
| [ 0.306736] PCI host bridge to bus 0000:00 |
| [ 0.306739] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.306742] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.306744] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.306746] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.306748] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.306750] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.306753] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.306755] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.306757] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.306760] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.306762] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.306764] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.306766] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.306769] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.306771] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.306773] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xefffffff window] |
| [ 0.306776] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.306778] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.306786] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.306868] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.306879] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit] |
| [ 0.306884] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.306887] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.306954] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.306963] pci 0000:00:04.0: reg 0x10: [mem 0xe1630000-0xe1637fff 64bit] |
| [ 0.307049] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.307072] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit] |
| [ 0.307138] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.307234] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 |
| [ 0.307332] pci 0000:00:16.0: reg 0x10: [mem 0xe1642000-0xe164200f 64bit] |
| [ 0.307654] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.307772] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.307791] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff] |
| [ 0.307798] pci 0000:00:19.0: reg 0x14: [mem 0xe163c000-0xe163cfff] |
| [ 0.307806] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.307865] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.307931] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.307951] pci 0000:00:1a.0: reg 0x10: [mem 0xe163f000-0xe163f3ff] |
| [ 0.308032] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.308102] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.308122] pci 0000:00:1b.0: reg 0x10: [mem 0xe1638000-0xe163bfff 64bit] |
| [ 0.308193] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.308268] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.308422] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.308521] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 |
| [ 0.308674] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.308769] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 |
| [ 0.308949] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.309045] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.309066] pci 0000:00:1d.0: reg 0x10: [mem 0xe1640000-0xe16403ff] |
| [ 0.309146] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.309216] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.309378] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.309397] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.309405] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.309412] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.309420] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.309428] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.309436] pci 0000:00:1f.2: reg 0x24: [mem 0xe163e000-0xe163e7ff] |
| [ 0.309479] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.309542] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.309560] pci 0000:00:1f.3: reg 0x10: [mem 0xe1641000-0xe16410ff 64bit] |
| [ 0.309580] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.309659] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.309682] pci 0000:00:1f.6: reg 0x10: [mem 0xe163d000-0xe163dfff 64bit] |
| [ 0.309887] pci 0000:01:00.0: [1180:e822] type 00 class 0x080501 |
| [ 0.309926] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.309986] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff] |
| [ 0.310301] pci 0000:01:00.0: supports D1 D2 |
| [ 0.310302] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.310514] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.310521] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.310619] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000 |
| [ 0.310697] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe150ffff 64bit] |
| [ 0.310987] pci 0000:02:00.0: supports D1 |
| [ 0.310987] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold |
| [ 0.311195] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.311202] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.311264] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.311269] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.311273] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.311281] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.311431] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.311474] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.311515] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.311554] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.311594] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.311634] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.311673] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.311712] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.312299] ACPI: EC: interrupt unblocked |
| [ 0.312307] ACPI: EC: event unblocked |
| [ 0.312315] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.312317] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events |
| [ 0.312383] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.312383] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.312383] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.312383] vgaarb: loaded |
| [ 0.312383] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.312383] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.312383] PTP clock support registered |
| [ 0.312383] EDAC MC: Ver: 3.0.0 |
| [ 0.312383] PCI: Using ACPI for IRQ routing |
| [ 0.313324] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.313402] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.313404] e820: reserve RAM buffer [mem 0xbff20000-0xbfffffff] |
| [ 0.313404] e820: reserve RAM buffer [mem 0x43d600000-0x43fffffff] |
| [ 0.313503] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.313503] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.315852] clocksource: Switched to clocksource tsc-early |
| [ 0.326043] VFS: Disk quotas dquot_6.6.0 |
| [ 0.326067] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.326094] *** VALIDATE hugetlbfs *** |
| [ 0.326149] pnp: PnP ACPI init |
| [ 0.326278] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.326282] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.326284] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.326286] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.326289] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.326291] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.326294] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.326296] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.326298] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.326301] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.326306] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.326716] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.326721] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.326758] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.326760] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.326764] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.326782] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.326809] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.326830] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.326851] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.326867] pnp: PnP ACPI: found 7 devices |
| [ 0.332547] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.332561] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.332569] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.332582] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.332589] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.332601] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.332605] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.332611] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.332616] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.332626] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.332627] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.332628] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.332629] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.332629] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.332630] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.332631] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.332632] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.332633] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.332634] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.332634] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.332635] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.332636] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.332637] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.332638] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.332639] pci_bus 0000:00: resource 19 [mem 0xc2a00001-0xefffffff window] |
| [ 0.332640] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.332641] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff] |
| [ 0.332642] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff] |
| [ 0.332643] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| [ 0.332644] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff] |
| [ 0.332645] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.332726] NET: Registered protocol family 2 |
| [ 0.332852] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) |
| [ 0.332899] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.333075] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.333196] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.333228] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.333268] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.333341] NET: Registered protocol family 1 |
| [ 0.333353] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.333852] PCI: CLS 64 bytes, default 64 |
| [ 0.333894] Unpacking initramfs... |
| [ 0.663042] Freeing initrd memory: 22348K |
| [ 0.663098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.663102] software IO TLB: mapped [mem 0xbbf20000-0xbff20000] (64MB) |
| [ 0.663703] Initialise system trusted keyrings |
| [ 0.663751] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 0.663783] zbud: loaded |
| [ 0.958218] alg: No test for lzo-rle (lzo-rle-generic) |
| [ 0.958680] alg: No test for lzo-rle (lzo-rle-scomp) |
| [ 0.959117] Key type asymmetric registered |
| [ 0.959120] Asymmetric key parser 'x509' registered |
| [ 0.959135] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 0.959164] io scheduler mq-deadline registered |
| [ 0.959166] io scheduler kyber registered |
| [ 0.959436] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 |
| [ 0.959670] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 |
| [ 0.959898] pcieport 0000:00:1c.2: Signaling PME with IRQ 28 |
| [ 0.959924] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 0.960083] intel_idle: MWAIT substates: 0x21120 |
| [ 0.960084] intel_idle: v0.4.1 model 0x3A |
| [ 0.960257] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.960951] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.961465] Linux agpgart interface v0.103 |
| [ 0.967935] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 1.016179] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.016182] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 1.016599] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.018235] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.018242] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.018444] mousedev: PS/2 mouse device common for all mice |
| [ 1.018494] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.018701] rtc_cmos 00:03: registered as rtc0 |
| [ 1.018722] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.018736] intel_pstate: Intel P-state driver initializing |
| [ 1.019011] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.019388] NET: Registered protocol family 10 |
| [ 1.019856] Segment Routing with IPv6 |
| [ 1.019874] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.019896] mip6: Mobile IPv6 |
| [ 1.019903] NET: Registered protocol family 17 |
| [ 1.019910] mpls_gso: MPLS GSO support |
| [ 1.020394] microcode: sig=0x306a9, pf=0x10, revision=0x21 |
| [ 1.020518] microcode: Microcode Update Driver: v2.2. |
| [ 1.020537] sched_clock: Marking stable (1019795966, 713992)->(1026081993, -5572035) |
| [ 1.020915] registered taskstats version 1 |
| [ 1.020920] Loading compiled-in X.509 certificates |
| [ 1.020952] zswap: loaded using pool lzo/zbud |
| [ 1.021102] ima: Allocated hash algorithm: sha256 |
| [ 1.151930] No architecture policies found |
| [ 1.152682] rtc_cmos 00:03: setting system clock to 2019-05-02T05:51:36 UTC (1556776296) |
| [ 1.154720] Freeing unused kernel image memory: 1604K |
| [ 1.171876] Write protecting the kernel read-only data: 16384k |
| [ 1.172709] Freeing unused kernel image memory: 2016K |
| [ 1.173108] Freeing unused kernel image memory: 956K |
| [ 1.188456] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.188458] x86/mm: Checking user space page tables |
| [ 1.194636] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.194638] Run /init as init process |
| [ 1.259475] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 1.259580] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 1.259594] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 1.288944] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.288949] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.289114] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.291907] ACPI: bus type USB registered |
| [ 1.291934] usbcore: registered new interface driver usbfs |
| [ 1.292043] usbcore: registered new interface driver hub |
| [ 1.292067] usbcore: registered new device driver usb |
| [ 1.293963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.294230] ehci-pci: EHCI PCI platform driver |
| [ 1.294249] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.294252] sdhci: Copyright(c) Pierre Ossman |
| [ 1.294404] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.294412] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.294428] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.298328] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.301052] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe163f000 |
| [ 1.303388] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.303768] SCSI subsystem initialized |
| [ 1.303974] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e822] (rev 7) |
| [ 1.304239] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.304483] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA |
| [ 1.306038] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.306042] ACPI: Thermal Zone [THM0] (55 C) |
| [ 1.307066] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.307070] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.307618] libata version 3.00 loaded. |
| [ 1.308890] ahci 0000:00:1f.2: version 3.0 |
| [ 1.309134] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.315866] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.315914] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 |
| [ 1.315919] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.315922] usb usb1: Product: EHCI Host Controller |
| [ 1.315925] usb usb1: Manufacturer: Linux 5.1.0-rc7-00001-gda5191c9a055 ehci_hcd |
| [ 1.315928] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.316050] hub 1-0:1.0: USB hub found |
| [ 1.316057] hub 1-0:1.0: 3 ports detected |
| [ 1.316249] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.316259] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 1.317452] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.317461] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.317613] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 |
| [ 1.317617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.317620] usb usb2: Product: xHCI Host Controller |
| [ 1.317623] usb usb2: Manufacturer: Linux 5.1.0-rc7-00001-gda5191c9a055 xhci-hcd |
| [ 1.317626] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 1.317733] hub 2-0:1.0: USB hub found |
| [ 1.317743] hub 2-0:1.0: 4 ports detected |
| [ 1.317898] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.317907] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 |
| [ 1.317908] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.317913] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 |
| [ 1.317917] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.317922] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.317962] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01 |
| [ 1.317966] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.317968] usb usb4: Product: xHCI Host Controller |
| [ 1.317970] usb usb4: Manufacturer: Linux 5.1.0-rc7-00001-gda5191c9a055 xhci-hcd |
| [ 1.317973] usb usb4: SerialNumber: 0000:00:14.0 |
| [ 1.318068] hub 4-0:1.0: USB hub found |
| [ 1.318081] hub 4-0:1.0: 4 ports detected |
| [ 1.321826] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.321837] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe1640000 |
| [ 1.321878] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode |
| [ 1.321881] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.322615] scsi host0: ahci |
| [ 1.325039] scsi host1: ahci |
| [ 1.325144] scsi host2: ahci |
| [ 1.325242] scsi host3: ahci |
| [ 1.325329] scsi host4: ahci |
| [ 1.325533] scsi host5: ahci |
| [ 1.325579] ata1: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e100 irq 30 |
| [ 1.325584] ata2: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e180 irq 30 |
| [ 1.325587] ata3: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e200 irq 30 |
| [ 1.325589] ata4: DUMMY |
| [ 1.325590] ata5: DUMMY |
| [ 1.325591] ata6: DUMMY |
| [ 1.336001] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.336452] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01 |
| [ 1.336457] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.336459] usb usb3: Product: EHCI Host Controller |
| [ 1.336461] usb usb3: Manufacturer: Linux 5.1.0-rc7-00001-gda5191c9a055 ehci_hcd |
| [ 1.336463] usb usb3: SerialNumber: 0000:00:1d.0 |
| [ 1.336634] hub 3-0:1.0: USB hub found |
| [ 1.336660] hub 3-0:1.0: 3 ports detected |
| [ 1.437971] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.562903] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:5f:1b:41 |
| [ 1.562908] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.562964] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.564060] e1000e 0000:00:19.0 enp0s25: renamed from eth0 |
| [ 1.638390] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.638762] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.639591] ata1.00: ATA-10: Crucial_CT525MX300SSD1, M0CR060, max UDMA/133 |
| [ 1.639600] ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 1.641887] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.644669] ata1.00: configured for UDMA/133 |
| [ 1.651872] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.655217] scsi 0:0:0:0: Direct-Access ATA Crucial_CT525MX3 R060 PQ: 0 ANSI: 5 |
| [ 1.671884] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.672026] tsc: Refined TSC clocksource calibration: 2893.430 MHz |
| [ 1.672048] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b5049ca8c, max_idle_ns: 440795222133 ns |
| [ 1.672089] clocksource: Switched to clocksource tsc |
| [ 1.808307] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.808317] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.808727] hub 1-1:1.0: USB hub found |
| [ 1.808871] hub 1-1:1.0: 6 ports detected |
| [ 1.828307] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.828317] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.828727] hub 3-1:1.0: USB hub found |
| [ 1.829729] hub 3-1:1.0: 8 ports detected |
| [ 1.970289] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 1.975682] random: fast init done |
| [ 2.048735] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 2.078931] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 2.095877] usb 1-1.4: new full-speed USB device number 3 using ehci-pci |
| [ 2.137957] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905 |
| [ 2.137975] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.175082] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 |
| [ 2.208033] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.208044] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.208049] usb 1-1.4: Product: BCM20702A0 |
| [ 2.208053] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.208058] usb 1-1.4: SerialNumber: 7CE9D3E5DCBD |
| [ 2.286360] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.287873] usb 1-1.5: new full-speed USB device number 4 using ehci-pci |
| [ 2.291801] ata1.00: Enabling discard_zeroes_data |
| [ 2.292031] sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB) |
| [ 2.292068] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.292075] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.292121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.292440] ata1.00: Enabling discard_zeroes_data |
| [ 2.293747] sda: sda1 sda2 < sda5 > |
| [ 2.294224] ata1.00: Enabling discard_zeroes_data |
| [ 2.294533] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.347569] PM: Image not found (code -22) |
| [ 2.396634] usb 1-1.5: New USB device found, idVendor=13d3, idProduct=3304, bcdDevice= 0.01 |
| [ 2.396639] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.414232] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 2.455721] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. |
| [ 2.475854] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.543780] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) |
| [ 2.564159] systemd[1]: Detected architecture x86-64. |
| [ 2.566243] systemd[1]: Set hostname to <laptop>. |
| [ 2.591476] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.18 |
| [ 2.591482] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.591484] usb 1-1.6: Product: Integrated Camera |
| [ 2.591485] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. |
| [ 2.646332] systemd[1]: Listening on Journal Socket. |
| [ 2.646473] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 2.646535] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 2.646594] systemd[1]: Listening on Device-mapper event daemon FIFOs. |
| [ 2.646642] systemd[1]: Listening on fsck to fsckd communication Socket. |
| [ 2.646695] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 2.646757] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 2.660077] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro |
| [ 2.684632] lp: driver loaded but no devices found |
| [ 2.692544] ppdev: user-space parallel port driver |
| [ 2.714225] Key type encrypted registered |
| [ 2.738599] systemd-journald[238]: Received request to flush runtime journal from PID 1 |
| [ 2.808005] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 2.827293] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input4 |
| [ 2.827316] ACPI: Sleep Button [SLPB] |
| [ 2.827378] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input5 |
| [ 2.827392] ACPI: Lid Switch [LID] |
| [ 2.827443] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 |
| [ 2.827453] ACPI: Power Button [PWRF] |
| [ 2.864874] ACPI: AC Adapter [AC] (on-line) |
| [ 2.891809] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 2.894686] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190215/utaddress-213) |
| [ 2.894694] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.894698] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190215/utaddress-213) |
| [ 2.894702] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.894704] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190215/utaddress-213) |
| [ 2.894707] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.894709] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190215/utaddress-213) |
| [ 2.894712] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.894714] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 2.899033] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 2.899168] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 2.910679] Non-volatile memory driver v1.3 |
| [ 2.910746] cfg80211: Loading compiled-in X.509 certificates for regulatory database |
| [ 2.913441] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 2.913446] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 2.913448] thinkpad_acpi: ThinkPad BIOS CBET4000 4.9-1485-g139b3cef03-dirty, EC G2HT35WW-3.22 |
| [ 2.913451] thinkpad_acpi: Lenovo ThinkPad X230, model 232566G |
| [ 2.917611] thinkpad_acpi: radio switch found; radios are enabled |
| [ 2.917721] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 2.917815] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 2.917819] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 2.919391] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 2.926745] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 2.926854] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 2.934314] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 2.934318] battery: new extension: ThinkPad Battery Extension |
| [ 2.934370] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 |
| [ 2.956052] input: PC Speaker as /devices/platform/pcspkr/input/input8 |
| [ 2.958779] Error: Driver 'pcspkr' is already registered, aborting... |
| [ 2.959777] i915 0000:00:02.0: vgaarb: deactivate vga console |
| [ 2.966101] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' |
| [ 2.966617] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 |
| [ 2.966624] cfg80211: failed to load regulatory.db |
| [ 2.971850] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 2.971857] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 2.971860] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 2.971862] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 2.987040] cryptd: max_cpu_qlen set to 1000 |
| [ 3.002642] Adding 16731132k swap on /dev/sda5. Priority:-2 extents:1 across:16731132k SSFS |
| [ 3.011486] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 3.011491] [drm] Driver supports precise vblank timestamp query. |
| [ 3.011778] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 3.012971] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 |
| [ 3.016308] ath: phy0: Set BT/WLAN RX diversity capability |
| [ 3.071971] ath: phy0: ASPM enabled: 0x43 |
| [ 3.071978] ath: EEPROM regdomain: 0x60 |
| [ 3.071979] ath: EEPROM indicates we should expect a direct regpair map |
| [ 3.071980] ath: Country alpha2 being used: 00 |
| [ 3.071981] ath: Regpair used: 0x60 |
| [ 3.073376] AVX version of gcm_enc/dec engaged. |
| [ 3.073380] AES CTR mode by8 optimization enabled |
| [ 3.096967] [drm] Initialized i915 1.6.0 20190207 for 0000:00:02.0 on minor 0 |
| [ 3.097126] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 3.108785] Bluetooth: Core ver 2.22 |
| [ 3.108805] NET: Registered protocol family 31 |
| [ 3.108807] Bluetooth: HCI device and connection manager initialized |
| [ 3.108813] Bluetooth: HCI socket layer initialized |
| [ 3.108817] Bluetooth: L2CAP socket layer initialized |
| [ 3.108822] Bluetooth: SCO socket layer initialized |
| [ 3.109925] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 3.111266] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffbbccc2010000, irq=17 |
| [ 3.113165] usbcore: registered new interface driver btusb |
| [ 3.114787] usb 1-1.5: Direct firmware load for ath3k-1.fw failed with error -2 |
| [ 3.114794] Bluetooth: Firmware file "ath3k-1.fw" not found |
| [ 3.114800] ath3k: probe of 1-1.5:1.0 failed with error -2 |
| [ 3.114821] usbcore: registered new interface driver ath3k |
| [ 3.120644] acpi device:0d: registered as cooling_device5 |
| [ 3.120713] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9 |
| [ 3.120860] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 3.138645] random: crng init done |
| [ 3.138650] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 3.190292] iTCO_vendor_support: vendor-support=0 |
| [ 3.193082] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 3.193140] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 3.193250] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 3.207356] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 3.207363] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 3.207367] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 3.207370] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 3.207372] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 3.207376] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 3.207379] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 3.207381] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 3.225367] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 3.225419] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 3.225461] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 3.225504] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 3.225546] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 3.225597] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 3.225639] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 3.225684] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 3.245362] Bluetooth: hci0: BCM: chip id 63 |
| [ 3.246356] Bluetooth: hci0: BCM: features 0x07 |
| [ 3.262359] Bluetooth: hci0: laptop |
| [ 3.263352] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 3.263367] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 3.263371] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 3.327042] fbcon: inteldrmfb (fb0) is primary device |
| [ 3.347926] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 |
| [ 3.364783] intel_rapl: Found RAPL domain package |
| [ 3.364785] intel_rapl: Found RAPL domain core |
| [ 3.364785] intel_rapl: Found RAPL domain uncore |
| [ 4.197968] Console: switching to colour frame buffer device 170x48 |
| [ 4.219462] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 4.269492] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 4.269524] Bluetooth: BNEP filters: protocol multicast |
| [ 4.269551] Bluetooth: BNEP socket layer initialized |
| [ 4.903865] mei_me 0000:00:16.0: wait hw ready failed |
| [ 4.903869] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 4.903888] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 5.880461] wlp2s0: authenticate with 2c:59:8a:70:7a:57 |
| [ 5.894884] wlp2s0: send auth to 2c:59:8a:70:7a:57 (try 1/3) |
| [ 5.913171] wlp2s0: authenticated |
| [ 5.915967] wlp2s0: associate with 2c:59:8a:70:7a:57 (try 1/3) |
| [ 5.966041] wlp2s0: RX AssocResp from 2c:59:8a:70:7a:57 (capab=0x431 status=0 aid=5) |
| [ 5.966278] wlp2s0: associated |
| [ 5.996921] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 6.919941] mei_me 0000:00:16.0: wait hw ready failed |
| [ 6.919950] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 6.919970] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 7.675722] media: Linux media interface: v0.10 |
| [ 7.682641] videodev: Linux video capture interface: v2.00 |
| [ 7.689373] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea) |
| [ 7.694932] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 7.694936] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 7.694939] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 7.694941] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 7.695038] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18 |
| [ 7.695132] usbcore: registered new interface driver uvcvideo |
| [ 7.695134] USB Video Class driver (1.1.1) |
| [ 8.008255] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 8.014823] tun: Universal TUN/TAP device driver, 1.6 |
| [ 8.096158] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 8.096166] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 8.096336] device virbr0-nic entered promiscuous mode |
| [ 8.263580] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 8.263584] virbr0: port 1(virbr0-nic) entered listening state |
| [ 8.305291] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 8.935942] mei_me 0000:00:16.0: wait hw ready failed |
| [ 8.935951] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 8.935960] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device |
| [ 8.935962] mei_me 0000:00:16.0: reset failed ret = -19 |
| [ 8.935965] mei_me 0000:00:16.0: link layer initialization failed. |
| [ 8.935968] mei_me 0000:00:16.0: init hw failure. |
| [ 8.936117] mei_me 0000:00:16.0: initialization failed. |
| [ 10.400965] Bridge firewalling registered |
| [ 10.440830] Initializing XFRM netlink socket |
| [ 10.769495] Bluetooth: RFCOMM TTY layer initialized |
| [ 10.769506] Bluetooth: RFCOMM socket layer initialized |
| [ 10.769513] Bluetooth: RFCOMM ver 1.11 |
| [ 17.528148] fuse init (API version 7.29) |
| [ 235.333654] docker0: port 1(veth4a5e368) entered blocking state |
| [ 235.333658] docker0: port 1(veth4a5e368) entered disabled state |
| [ 235.333835] device veth4a5e368 entered promiscuous mode |
| [ 235.577216] eth0: renamed from veth596f43a |
| [ 235.605200] IPv6: ADDRCONF(NETDEV_CHANGE): veth4a5e368: link becomes ready |
| [ 235.605413] docker0: port 1(veth4a5e368) entered blocking state |
| [ 235.605419] docker0: port 1(veth4a5e368) entered forwarding state |
| [ 235.605526] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready |
| [ 484.642397] docker0: port 1(veth4a5e368) entered disabled state |
| [ 484.642498] veth596f43a: renamed from eth0 |
| [ 484.697167] docker0: port 1(veth4a5e368) entered disabled state |
| [ 484.702487] device veth4a5e368 left promiscuous mode |
| [ 484.702493] docker0: port 1(veth4a5e368) entered disabled state |