[    0.000000] Linux version 5.1.0-rc7-00001-gda5191c9a055 (martin@laptop) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #55 SMP Mon Apr 29 05:26:32 CEST 2019
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-rc7-00001-gda5191c9a055 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff1ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff20000-0x00000000c29fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043d5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 232566G/232566G, BIOS CBET4000 4.9-1485-g139b3cef03-dirty 05/02/2019
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2893.312 MHz processor
[    0.001001] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001002] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001006] last_pfn = 0x43d600 max_arch_pfn = 0x400000000
[    0.001009] MTRR default type: write-back
[    0.001010] MTRR fixed ranges enabled:
[    0.001011]   00000-9FFFF write-back
[    0.001012]   A0000-BFFFF uncachable
[    0.001012]   C0000-FFFFF write-back
[    0.001013] MTRR variable ranges enabled:
[    0.001014]   0 base 0C0000000 mask FF0000000 uncachable
[    0.001015]   1 base 0D0000000 mask FF0000000 write-combining
[    0.001015]   2 base 0E0000000 mask FE0000000 uncachable
[    0.001016]   3 disabled
[    0.001016]   4 disabled
[    0.001017]   5 disabled
[    0.001017]   6 disabled
[    0.001017]   7 disabled
[    0.001018]   8 disabled
[    0.001018]   9 disabled
[    0.001778] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002142] last_pfn = 0xbff20 max_arch_pfn = 0x400000000
[    0.011815] BRK [0x10c001000, 0x10c001fff] PGTABLE
[    0.011817] BRK [0x10c002000, 0x10c002fff] PGTABLE
[    0.011818] BRK [0x10c003000, 0x10c003fff] PGTABLE
[    0.011848] BRK [0x10c004000, 0x10c004fff] PGTABLE
[    0.011850] BRK [0x10c005000, 0x10c005fff] PGTABLE
[    0.011941] BRK [0x10c006000, 0x10c006fff] PGTABLE
[    0.011951] BRK [0x10c007000, 0x10c007fff] PGTABLE
[    0.011974] BRK [0x10c008000, 0x10c008fff] PGTABLE
[    0.012131] RAMDISK: [mem 0x35449000-0x36a1bfff]
[    0.012136] ACPI: Early table checksum verification disabled
[    0.012190] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
[    0.012193] ACPI: XSDT 0x00000000BFF440E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20180810)
[    0.012198] ACPI: FACP 0x00000000BFF47B20 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20180810)
[    0.012203] ACPI: DSDT 0x00000000BFF44280 00389F (v02 COREv4 COREBOOT 20110725 INTL 20180810)
[    0.012205] ACPI: FACS 0x00000000BFF44240 000040
[    0.012207] ACPI: FACS 0x00000000BFF44240 000040
[    0.012210] ACPI: SSDT 0x00000000BFF47C20 001A8B (v02 COREv4 COREBOOT 0000002A CORE 20180810)
[    0.012212] ACPI: MCFG 0x00000000BFF496B0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20180810)
[    0.012215] ACPI: TCPA 0x00000000BFF496F0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20180810)
[    0.012217] ACPI: APIC 0x00000000BFF49730 00006C (v02 COREv4 COREBOOT 00000000 CORE 20180810)
[    0.012220] ACPI: DMAR 0x00000000BFF497A0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20180810)
[    0.012222] ACPI: HPET 0x00000000BFF4B870 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180810)
[    0.012228] ACPI: Local APIC address 0xfee00000
[    0.012304] No NUMA configuration found
[    0.012305] Faking a node at [mem 0x0000000000000000-0x000000043d5fffff]
[    0.012309] NODE_DATA(0) allocated [mem 0x43d5ef000-0x43d5f3fff]
[    0.012337] Zone ranges:
[    0.012338]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012339]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.012340]   Normal   [mem 0x0000000100000000-0x000000043d5fffff]
[    0.012341]   Device   empty
[    0.012342] Movable zone start for each node
[    0.012343] Early memory node ranges
[    0.012344]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.012345]   node   0: [mem 0x0000000000100000-0x00000000bff1ffff]
[    0.012346]   node   0: [mem 0x0000000100000000-0x000000043d5fffff]
[    0.012354] Zeroed struct page in unavailable ranges: 322 pages
[    0.012355] Initmem setup node 0 [mem 0x0000000000001000-0x000000043d5fffff]
[    0.012357] On node 0 totalpages: 4183230
[    0.012358]   DMA zone: 64 pages used for memmap
[    0.012358]   DMA zone: 21 pages reserved
[    0.012359]   DMA zone: 3998 pages, LIFO batch:0
[    0.012453]   DMA32 zone: 12221 pages used for memmap
[    0.012454]   DMA32 zone: 782112 pages, LIFO batch:63
[    0.031021]   Normal zone: 53080 pages used for memmap
[    0.031023]   Normal zone: 3397120 pages, LIFO batch:63
[    0.107914] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff]
[    0.108110] ACPI: PM-Timer IO Port: 0x508
[    0.108112] ACPI: Local APIC address 0xfee00000
[    0.108127] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.108130] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.108131] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.108133] ACPI: IRQ0 used by override.
[    0.108134] ACPI: IRQ9 used by override.
[    0.108136] Using ACPI (MADT) for SMP configuration information
[    0.108138] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.108143] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.108153] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.108155] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.108155] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.108156] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.108158] PM: Registered nosave memory: [mem 0xbff20000-0xc29fffff]
[    0.108158] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
[    0.108159] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.108160] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[    0.108160] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.108161] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.108162] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.108163] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.108164] [mem 0xc2a00000-0xefffffff] available for PCI devices
[    0.108165] Booting paravirtualized kernel on bare hardware
[    0.108168] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.202646] random: get_random_bytes called from start_kernel+0x95/0x4b6 with crng_init=0
[    0.202652] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.202823] percpu: Embedded 44 pages/cpu s142744 r8192 d29288 u524288
[    0.202829] pcpu-alloc: s142744 r8192 d29288 u524288 alloc=1*2097152
[    0.202830] pcpu-alloc: [0] 0 1 2 3 
[    0.202847] Built 1 zonelists, mobility grouping on.  Total pages: 4117844
[    0.202847] Policy zone: Normal
[    0.202849] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-rc7-00001-gda5191c9a055 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed
[    0.206356] Calgary: detecting Calgary via BIOS EBDA area
[    0.206362] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.248652] Memory: 16356840K/16732920K available (10243K kernel code, 1173K rwdata, 3140K rodata, 1604K init, 2356K bss, 376080K reserved, 0K cma-reserved)
[    0.248735] Kernel/User page tables isolation: enabled
[    0.248749] ftrace: allocating 31682 entries in 124 pages
[    0.260032] rcu: Hierarchical RCU implementation.
[    0.260033] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.260035] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.260035] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.262944] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[    0.263545] Console: colour dummy device 80x25
[    0.263653] printk: console [tty0] enabled
[    0.263669] ACPI: Core revision 20190215
[    0.263814] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.263827] hpet clockevent registered
[    0.263832] APIC: Switch to symmetric I/O mode setup
[    0.263834] DMAR: Host address width 36
[    0.263836] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.263841] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.263844] DMAR: RMRR base: 0x000000c0800000 end: 0x000000c29fffff
[    0.263846] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.263850] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.263853] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.263855] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.263856] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.264283] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.264286] x2apic enabled
[    0.264292] Switched APIC routing to cluster x2apic.
[    0.264740] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.283833] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b494ed163, max_idle_ns: 440795232905 ns
[    0.283847] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.62 BogoMIPS (lpj=11573248)
[    0.283851] pid_max: default: 32768 minimum: 301
[    0.283893] LSM: Security Framework initializing
[    0.283905] Yama: becoming mindful.
[    0.283913] SELinux:  Initializing.
[    0.283928] *** VALIDATE SELinux ***
[    0.283930] TOMOYO Linux initialized
[    0.286288] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.287482] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.287543] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.287582] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.287732] *** VALIDATE proc ***
[    0.287776] *** VALIDATE cgroup1 ***
[    0.287779] *** VALIDATE cgroup2 ***
[    0.287807] mce: CPU supports 7 MCE banks
[    0.287817] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.287825] process: using mwait in idle threads
[    0.287828] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.287830] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.287842] Spectre V2 : Mitigation: Full generic retpoline
[    0.287844] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.287846] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.287854] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.287857] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.287859] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.288011] Freeing SMP alternatives memory: 28K
[    0.289601] TSC deadline timer enabled
[    0.289604] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.289694] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.289714] ... version:                3
[    0.289716] ... bit width:              48
[    0.289717] ... generic registers:      4
[    0.289718] ... value mask:             0000ffffffffffff
[    0.289720] ... max period:             00007fffffffffff
[    0.289721] ... fixed-purpose events:   3
[    0.289723] ... event mask:             000000070000000f
[    0.289757] rcu: Hierarchical SRCU implementation.
[    0.290249] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.290292] smp: Bringing up secondary CPUs ...
[    0.290374] x86: Booting SMP configuration:
[    0.290376] .... node  #0, CPUs:      #1 #2 #3
[    0.294268] smp: Brought up 1 node, 4 CPUs
[    0.294268] smpboot: Max logical packages: 1
[    0.294268] smpboot: Total of 4 processors activated (23146.49 BogoMIPS)
[    0.296226] devtmpfs: initialized
[    0.296226] x86/mm: Memory block size: 128MB
[    0.297050] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.297050] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.297050] pinctrl core: initialized pinctrl subsystem
[    0.297050] NET: Registered protocol family 16
[    0.297050] audit: initializing netlink subsys (disabled)
[    0.297050] audit: type=2000 audit(1556776295.032:1): state=initialized audit_enabled=0 res=1
[    0.297050] cpuidle: using governor ladder
[    0.297050] cpuidle: using governor menu
[    0.297050] ACPI: bus type PCI registered
[    0.297050] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.297050] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.297050] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.297050] PCI: Using configuration type 1 for base access
[    0.297050] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.297050] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.297050] ACPI: Added _OSI(Module Device)
[    0.297050] ACPI: Added _OSI(Processor Device)
[    0.297050] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.297050] ACPI: Added _OSI(Processor Aggregator Device)
[    0.297050] ACPI: Added _OSI(Linux-Dell-Video)
[    0.297050] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.297050] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.301606] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.302469] ACPI: EC: EC started
[    0.302471] ACPI: EC: interrupt blocked
[    0.302747] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.302749] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.302752] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[    0.302754] ACPI: Interpreter enabled
[    0.302769] ACPI: (supports S0 S3 S4 S5)
[    0.302771] ACPI: Using IOAPIC for interrupt routing
[    0.302788] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.302909] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.306213] ACPI: Power Resource [FPWR] (off)
[    0.306482] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.306487] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.306530] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
[    0.306539] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.306585] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff])
[    0.306736] PCI host bridge to bus 0000:00
[    0.306739] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.306742] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.306744] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.306746] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.306748] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.306750] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.306753] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.306755] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.306757] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.306760] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.306762] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.306764] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.306766] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.306769] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.306771] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.306773] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xefffffff window]
[    0.306776] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.306778] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306786] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.306868] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.306879] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[    0.306884] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.306887] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.306954] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[    0.306963] pci 0000:00:04.0: reg 0x10: [mem 0xe1630000-0xe1637fff 64bit]
[    0.307049] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.307072] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit]
[    0.307138] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.307234] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.307332] pci 0000:00:16.0: reg 0x10: [mem 0xe1642000-0xe164200f 64bit]
[    0.307654] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.307772] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.307791] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[    0.307798] pci 0000:00:19.0: reg 0x14: [mem 0xe163c000-0xe163cfff]
[    0.307806] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.307865] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.307931] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.307951] pci 0000:00:1a.0: reg 0x10: [mem 0xe163f000-0xe163f3ff]
[    0.308032] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.308102] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.308122] pci 0000:00:1b.0: reg 0x10: [mem 0xe1638000-0xe163bfff 64bit]
[    0.308193] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.308268] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.308422] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.308521] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.308674] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.308769] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.308949] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.309045] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.309066] pci 0000:00:1d.0: reg 0x10: [mem 0xe1640000-0xe16403ff]
[    0.309146] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.309216] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.309378] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.309397] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.309405] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.309412] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.309420] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.309428] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.309436] pci 0000:00:1f.2: reg 0x24: [mem 0xe163e000-0xe163e7ff]
[    0.309479] pci 0000:00:1f.2: PME# supported from D3hot
[    0.309542] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.309560] pci 0000:00:1f.3: reg 0x10: [mem 0xe1641000-0xe16410ff 64bit]
[    0.309580] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.309659] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[    0.309682] pci 0000:00:1f.6: reg 0x10: [mem 0xe163d000-0xe163dfff 64bit]
[    0.309887] pci 0000:01:00.0: [1180:e822] type 00 class 0x080501
[    0.309926] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[    0.309986] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff]
[    0.310301] pci 0000:01:00.0: supports D1 D2
[    0.310302] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.310514] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.310521] pci 0000:00:1c.0:   bridge window [mem 0xe1400000-0xe14fffff]
[    0.310619] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.310697] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe150ffff 64bit]
[    0.310987] pci 0000:02:00.0: supports D1
[    0.310987] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.311195] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.311202] pci 0000:00:1c.1:   bridge window [mem 0xe1500000-0xe15fffff]
[    0.311264] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.311269] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.311273] pci 0000:00:1c.2:   bridge window [mem 0xe0800000-0xe0ffffff]
[    0.311281] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.311431] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.311474] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.311515] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.311554] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.311594] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.311634] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.311673] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.311712] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.312299] ACPI: EC: interrupt unblocked
[    0.312307] ACPI: EC: event unblocked
[    0.312315] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.312317] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[    0.312383] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.312383] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.312383] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.312383] vgaarb: loaded
[    0.312383] pps_core: LinuxPPS API ver. 1 registered
[    0.312383] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.312383] PTP clock support registered
[    0.312383] EDAC MC: Ver: 3.0.0
[    0.312383] PCI: Using ACPI for IRQ routing
[    0.313324] PCI: pci_cache_line_size set to 64 bytes
[    0.313402] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.313404] e820: reserve RAM buffer [mem 0xbff20000-0xbfffffff]
[    0.313404] e820: reserve RAM buffer [mem 0x43d600000-0x43fffffff]
[    0.313503] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.313503] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.315852] clocksource: Switched to clocksource tsc-early
[    0.326043] VFS: Disk quotas dquot_6.6.0
[    0.326067] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.326094] *** VALIDATE hugetlbfs ***
[    0.326149] pnp: PnP ACPI init
[    0.326278] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.326282] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.326284] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.326286] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.326289] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.326291] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.326294] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.326296] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.326298] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.326301] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.326306] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.326716] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.326721] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.326758] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.326760] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.326764] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.326782] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.326809] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.326830] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.326851] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.326867] pnp: PnP ACPI: found 7 devices
[    0.332547] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.332561] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.332569] pci 0000:00:1c.0:   bridge window [mem 0xe1400000-0xe14fffff]
[    0.332582] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.332589] pci 0000:00:1c.1:   bridge window [mem 0xe1500000-0xe15fffff]
[    0.332601] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.332605] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.332611] pci 0000:00:1c.2:   bridge window [mem 0xe0800000-0xe0ffffff]
[    0.332616] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.332626] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.332627] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.332628] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.332629] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.332629] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.332630] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.332631] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.332632] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.332633] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.332634] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.332634] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.332635] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.332636] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.332637] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.332638] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.332639] pci_bus 0000:00: resource 19 [mem 0xc2a00001-0xefffffff window]
[    0.332640] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.332641] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
[    0.332642] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
[    0.332643] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.332644] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff]
[    0.332645] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[    0.332726] NET: Registered protocol family 2
[    0.332852] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.332899] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.333075] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.333196] TCP: Hash tables configured (established 131072 bind 65536)
[    0.333228] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.333268] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.333341] NET: Registered protocol family 1
[    0.333353] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.333852] PCI: CLS 64 bytes, default 64
[    0.333894] Unpacking initramfs...
[    0.663042] Freeing initrd memory: 22348K
[    0.663098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.663102] software IO TLB: mapped [mem 0xbbf20000-0xbff20000] (64MB)
[    0.663703] Initialise system trusted keyrings
[    0.663751] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.663783] zbud: loaded
[    0.958218] alg: No test for lzo-rle (lzo-rle-generic)
[    0.958680] alg: No test for lzo-rle (lzo-rle-scomp)
[    0.959117] Key type asymmetric registered
[    0.959120] Asymmetric key parser 'x509' registered
[    0.959135] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.959164] io scheduler mq-deadline registered
[    0.959166] io scheduler kyber registered
[    0.959436] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[    0.959670] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[    0.959898] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[    0.959924] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.960083] intel_idle: MWAIT substates: 0x21120
[    0.960084] intel_idle: v0.4.1 model 0x3A
[    0.960257] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.960951] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.961465] Linux agpgart interface v0.103
[    0.967935] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[    1.016179] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.016182] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    1.016599] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.018235] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.018242] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.018444] mousedev: PS/2 mouse device common for all mice
[    1.018494] rtc_cmos 00:03: RTC can wake from S4
[    1.018701] rtc_cmos 00:03: registered as rtc0
[    1.018722] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.018736] intel_pstate: Intel P-state driver initializing
[    1.019011] ledtrig-cpu: registered to indicate activity on CPUs
[    1.019388] NET: Registered protocol family 10
[    1.019856] Segment Routing with IPv6
[    1.019874] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.019896] mip6: Mobile IPv6
[    1.019903] NET: Registered protocol family 17
[    1.019910] mpls_gso: MPLS GSO support
[    1.020394] microcode: sig=0x306a9, pf=0x10, revision=0x21
[    1.020518] microcode: Microcode Update Driver: v2.2.
[    1.020537] sched_clock: Marking stable (1019795966, 713992)->(1026081993, -5572035)
[    1.020915] registered taskstats version 1
[    1.020920] Loading compiled-in X.509 certificates
[    1.020952] zswap: loaded using pool lzo/zbud
[    1.021102] ima: Allocated hash algorithm: sha256
[    1.151930] No architecture policies found
[    1.152682] rtc_cmos 00:03: setting system clock to 2019-05-02T05:51:36 UTC (1556776296)
[    1.154720] Freeing unused kernel image memory: 1604K
[    1.171876] Write protecting the kernel read-only data: 16384k
[    1.172709] Freeing unused kernel image memory: 2016K
[    1.173108] Freeing unused kernel image memory: 956K
[    1.188456] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.188458] x86/mm: Checking user space page tables
[    1.194636] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.194638] Run /init as init process
[    1.259475] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.259580] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.259594] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.288944] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.288949] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.289114] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.291907] ACPI: bus type USB registered
[    1.291934] usbcore: registered new interface driver usbfs
[    1.292043] usbcore: registered new interface driver hub
[    1.292067] usbcore: registered new device driver usb
[    1.293963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.294230] ehci-pci: EHCI PCI platform driver
[    1.294249] sdhci: Secure Digital Host Controller Interface driver
[    1.294252] sdhci: Copyright(c) Pierre Ossman
[    1.294404] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.294412] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.294428] ehci-pci 0000:00:1a.0: debug port 2
[    1.298328] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.301052] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe163f000
[    1.303388] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.303768] SCSI subsystem initialized
[    1.303974] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e822] (rev 7)
[    1.304239] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    1.304483] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[    1.306038] thermal LNXTHERM:00: registered as thermal_zone0
[    1.306042] ACPI: Thermal Zone [THM0] (55 C)
[    1.307066] thermal LNXTHERM:01: registered as thermal_zone1
[    1.307070] ACPI: Thermal Zone [THM1] (27 C)
[    1.307618] libata version 3.00 loaded.
[    1.308890] ahci 0000:00:1f.2: version 3.0
[    1.309134] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.315866] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.315914] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    1.315919] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.315922] usb usb1: Product: EHCI Host Controller
[    1.315925] usb usb1: Manufacturer: Linux 5.1.0-rc7-00001-gda5191c9a055 ehci_hcd
[    1.315928] usb usb1: SerialNumber: 0000:00:1a.0
[    1.316050] hub 1-0:1.0: USB hub found
[    1.316057] hub 1-0:1.0: 3 ports detected
[    1.316249] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.316259] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.317452] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[    1.317461] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.317613] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    1.317617] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.317620] usb usb2: Product: xHCI Host Controller
[    1.317623] usb usb2: Manufacturer: Linux 5.1.0-rc7-00001-gda5191c9a055 xhci-hcd
[    1.317626] usb usb2: SerialNumber: 0000:00:14.0
[    1.317733] hub 2-0:1.0: USB hub found
[    1.317743] hub 2-0:1.0: 4 ports detected
[    1.317898] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.317907] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    1.317908] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.317913] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.317917] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.317922] ehci-pci 0000:00:1d.0: debug port 2
[    1.317962] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[    1.317966] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.317968] usb usb4: Product: xHCI Host Controller
[    1.317970] usb usb4: Manufacturer: Linux 5.1.0-rc7-00001-gda5191c9a055 xhci-hcd
[    1.317973] usb usb4: SerialNumber: 0000:00:14.0
[    1.318068] hub 4-0:1.0: USB hub found
[    1.318081] hub 4-0:1.0: 4 ports detected
[    1.321826] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.321837] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe1640000
[    1.321878] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    1.321881] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.322615] scsi host0: ahci
[    1.325039] scsi host1: ahci
[    1.325144] scsi host2: ahci
[    1.325242] scsi host3: ahci
[    1.325329] scsi host4: ahci
[    1.325533] scsi host5: ahci
[    1.325579] ata1: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e100 irq 30
[    1.325584] ata2: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e180 irq 30
[    1.325587] ata3: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e200 irq 30
[    1.325589] ata4: DUMMY
[    1.325590] ata5: DUMMY
[    1.325591] ata6: DUMMY
[    1.336001] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.336452] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    1.336457] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.336459] usb usb3: Product: EHCI Host Controller
[    1.336461] usb usb3: Manufacturer: Linux 5.1.0-rc7-00001-gda5191c9a055 ehci_hcd
[    1.336463] usb usb3: SerialNumber: 0000:00:1d.0
[    1.336634] hub 3-0:1.0: USB hub found
[    1.336660] hub 3-0:1.0: 3 ports detected
[    1.437971] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.562903] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:5f:1b:41
[    1.562908] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.562964] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.564060] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.638390] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.638762] ata1.00: supports DRM functions and may not be fully accessible
[    1.639591] ata1.00: ATA-10: Crucial_CT525MX300SSD1,  M0CR060, max UDMA/133
[    1.639600] ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.641887] ata1.00: supports DRM functions and may not be fully accessible
[    1.644669] ata1.00: configured for UDMA/133
[    1.651872] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.655217] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT525MX3 R060 PQ: 0 ANSI: 5
[    1.671884] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.672026] tsc: Refined TSC clocksource calibration: 2893.430 MHz
[    1.672048] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b5049ca8c, max_idle_ns: 440795222133 ns
[    1.672089] clocksource: Switched to clocksource tsc
[    1.808307] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.808317] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.808727] hub 1-1:1.0: USB hub found
[    1.808871] hub 1-1:1.0: 6 ports detected
[    1.828307] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.828317] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.828727] hub 3-1:1.0: USB hub found
[    1.829729] hub 3-1:1.0: 8 ports detected
[    1.970289] ata2: SATA link down (SStatus 0 SControl 300)
[    1.975682] random: fast init done
[    2.048735] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[    2.078931] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[    2.095877] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[    2.137957] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[    2.137975] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.175082] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.208033] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[    2.208044] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.208049] usb 1-1.4: Product: BCM20702A0
[    2.208053] usb 1-1.4: Manufacturer: Broadcom Corp
[    2.208058] usb 1-1.4: SerialNumber: 7CE9D3E5DCBD
[    2.286360] ata3: SATA link down (SStatus 0 SControl 300)
[    2.287873] usb 1-1.5: new full-speed USB device number 4 using ehci-pci
[    2.291801] ata1.00: Enabling discard_zeroes_data
[    2.292031] sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
[    2.292068] sd 0:0:0:0: [sda] Write Protect is off
[    2.292075] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.292121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.292440] ata1.00: Enabling discard_zeroes_data
[    2.293747]  sda: sda1 sda2 < sda5 >
[    2.294224] ata1.00: Enabling discard_zeroes_data
[    2.294533] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.347569] PM: Image not found (code -22)
[    2.396634] usb 1-1.5: New USB device found, idVendor=13d3, idProduct=3304, bcdDevice= 0.01
[    2.396639] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.414232] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.455721] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    2.475854] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[    2.543780] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.564159] systemd[1]: Detected architecture x86-64.
[    2.566243] systemd[1]: Set hostname to <laptop>.
[    2.591476] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.18
[    2.591482] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.591484] usb 1-1.6: Product: Integrated Camera
[    2.591485] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.646332] systemd[1]: Listening on Journal Socket.
[    2.646473] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.646535] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.646594] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.646642] systemd[1]: Listening on fsck to fsckd communication Socket.
[    2.646695] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.646757] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.660077] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    2.684632] lp: driver loaded but no devices found
[    2.692544] ppdev: user-space parallel port driver
[    2.714225] Key type encrypted registered
[    2.738599] systemd-journald[238]: Received request to flush runtime journal from PID 1
[    2.808005] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.827293] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input4
[    2.827316] ACPI: Sleep Button [SLPB]
[    2.827378] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input5
[    2.827392] ACPI: Lid Switch [LID]
[    2.827443] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    2.827453] ACPI: Power Button [PWRF]
[    2.864874] ACPI: AC Adapter [AC] (on-line)
[    2.891809] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.894686] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190215/utaddress-213)
[    2.894694] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.894698] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190215/utaddress-213)
[    2.894702] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.894704] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190215/utaddress-213)
[    2.894707] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.894709] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190215/utaddress-213)
[    2.894712] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.894714] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.899033] battery: ACPI: Battery Slot [BAT0] (battery present)
[    2.899168] battery: ACPI: Battery Slot [BAT1] (battery absent)
[    2.910679] Non-volatile memory driver v1.3
[    2.910746] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.913441] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[    2.913446] thinkpad_acpi: http://ibm-acpi.sf.net/
[    2.913448] thinkpad_acpi: ThinkPad BIOS CBET4000 4.9-1485-g139b3cef03-dirty, EC G2HT35WW-3.22
[    2.913451] thinkpad_acpi: Lenovo ThinkPad X230, model 232566G
[    2.917611] thinkpad_acpi: radio switch found; radios are enabled
[    2.917721] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[    2.917815] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    2.917819] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    2.919391] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    2.926745] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    2.926854] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    2.934314] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[    2.934318] battery: new extension: ThinkPad Battery Extension
[    2.934370] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[    2.956052] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    2.958779] Error: Driver 'pcspkr' is already registered, aborting...
[    2.959777] i915 0000:00:02.0: vgaarb: deactivate vga console
[    2.966101] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.966617] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.966624] cfg80211: failed to load regulatory.db
[    2.971850] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    2.971857] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    2.971860] RAPL PMU: hw unit of domain package 2^-16 Joules
[    2.971862] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    2.987040] cryptd: max_cpu_qlen set to 1000
[    3.002642] Adding 16731132k swap on /dev/sda5.  Priority:-2 extents:1 across:16731132k SSFS
[    3.011486] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.011491] [drm] Driver supports precise vblank timestamp query.
[    3.011778] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.012971] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[    3.016308] ath: phy0: Set BT/WLAN RX diversity capability
[    3.071971] ath: phy0: ASPM enabled: 0x43
[    3.071978] ath: EEPROM regdomain: 0x60
[    3.071979] ath: EEPROM indicates we should expect a direct regpair map
[    3.071980] ath: Country alpha2 being used: 00
[    3.071981] ath: Regpair used: 0x60
[    3.073376] AVX version of gcm_enc/dec engaged.
[    3.073380] AES CTR mode by8 optimization enabled
[    3.096967] [drm] Initialized i915 1.6.0 20190207 for 0000:00:02.0 on minor 0
[    3.097126] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.108785] Bluetooth: Core ver 2.22
[    3.108805] NET: Registered protocol family 31
[    3.108807] Bluetooth: HCI device and connection manager initialized
[    3.108813] Bluetooth: HCI socket layer initialized
[    3.108817] Bluetooth: L2CAP socket layer initialized
[    3.108822] Bluetooth: SCO socket layer initialized
[    3.109925] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    3.111266] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffbbccc2010000, irq=17
[    3.113165] usbcore: registered new interface driver btusb
[    3.114787] usb 1-1.5: Direct firmware load for ath3k-1.fw failed with error -2
[    3.114794] Bluetooth: Firmware file "ath3k-1.fw" not found
[    3.114800] ath3k: probe of 1-1.5:1.0 failed with error -2
[    3.114821] usbcore: registered new interface driver ath3k
[    3.120644] acpi device:0d: registered as cooling_device5
[    3.120713] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    3.120860] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.138645] random: crng init done
[    3.138650] random: 7 urandom warning(s) missed due to ratelimiting
[    3.190292] iTCO_vendor_support: vendor-support=0
[    3.193082] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.193140] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[    3.193250] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.207356] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.207363] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.207367] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[    3.207370] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.207372] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.207376] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    3.207379] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[    3.207381] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.225367] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    3.225419] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    3.225461] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    3.225504] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    3.225546] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    3.225597] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    3.225639] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    3.225684] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    3.245362] Bluetooth: hci0: BCM: chip id 63
[    3.246356] Bluetooth: hci0: BCM: features 0x07
[    3.262359] Bluetooth: hci0: laptop
[    3.263352] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    3.263367] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[    3.263371] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[    3.327042] fbcon: inteldrmfb (fb0) is primary device
[    3.347926] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[    3.364783] intel_rapl: Found RAPL domain package
[    3.364785] intel_rapl: Found RAPL domain core
[    3.364785] intel_rapl: Found RAPL domain uncore
[    4.197968] Console: switching to colour frame buffer device 170x48
[    4.219462] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.269492] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.269524] Bluetooth: BNEP filters: protocol multicast
[    4.269551] Bluetooth: BNEP socket layer initialized
[    4.903865] mei_me 0000:00:16.0: wait hw ready failed
[    4.903869] mei_me 0000:00:16.0: hw_start failed ret = -62
[    4.903888] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[    5.880461] wlp2s0: authenticate with 2c:59:8a:70:7a:57
[    5.894884] wlp2s0: send auth to 2c:59:8a:70:7a:57 (try 1/3)
[    5.913171] wlp2s0: authenticated
[    5.915967] wlp2s0: associate with 2c:59:8a:70:7a:57 (try 1/3)
[    5.966041] wlp2s0: RX AssocResp from 2c:59:8a:70:7a:57 (capab=0x431 status=0 aid=5)
[    5.966278] wlp2s0: associated
[    5.996921] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[    6.919941] mei_me 0000:00:16.0: wait hw ready failed
[    6.919950] mei_me 0000:00:16.0: hw_start failed ret = -62
[    6.919970] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[    7.675722] media: Linux media interface: v0.10
[    7.682641] videodev: Linux video capture interface: v2.00
[    7.689373] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[    7.694932] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[    7.694936] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[    7.694939] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[    7.694941] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[    7.695038] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18
[    7.695132] usbcore: registered new interface driver uvcvideo
[    7.695134] USB Video Class driver (1.1.1)
[    8.008255] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    8.014823] tun: Universal TUN/TAP device driver, 1.6
[    8.096158] virbr0: port 1(virbr0-nic) entered blocking state
[    8.096166] virbr0: port 1(virbr0-nic) entered disabled state
[    8.096336] device virbr0-nic entered promiscuous mode
[    8.263580] virbr0: port 1(virbr0-nic) entered blocking state
[    8.263584] virbr0: port 1(virbr0-nic) entered listening state
[    8.305291] virbr0: port 1(virbr0-nic) entered disabled state
[    8.935942] mei_me 0000:00:16.0: wait hw ready failed
[    8.935951] mei_me 0000:00:16.0: hw_start failed ret = -62
[    8.935960] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[    8.935962] mei_me 0000:00:16.0: reset failed ret = -19
[    8.935965] mei_me 0000:00:16.0: link layer initialization failed.
[    8.935968] mei_me 0000:00:16.0: init hw failure.
[    8.936117] mei_me 0000:00:16.0: initialization failed.
[   10.400965] Bridge firewalling registered
[   10.440830] Initializing XFRM netlink socket
[   10.769495] Bluetooth: RFCOMM TTY layer initialized
[   10.769506] Bluetooth: RFCOMM socket layer initialized
[   10.769513] Bluetooth: RFCOMM ver 1.11
[   17.528148] fuse init (API version 7.29)
[  235.333654] docker0: port 1(veth4a5e368) entered blocking state
[  235.333658] docker0: port 1(veth4a5e368) entered disabled state
[  235.333835] device veth4a5e368 entered promiscuous mode
[  235.577216] eth0: renamed from veth596f43a
[  235.605200] IPv6: ADDRCONF(NETDEV_CHANGE): veth4a5e368: link becomes ready
[  235.605413] docker0: port 1(veth4a5e368) entered blocking state
[  235.605419] docker0: port 1(veth4a5e368) entered forwarding state
[  235.605526] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[  484.642397] docker0: port 1(veth4a5e368) entered disabled state
[  484.642498] veth596f43a: renamed from eth0
[  484.697167] docker0: port 1(veth4a5e368) entered disabled state
[  484.702487] device veth4a5e368 left promiscuous mode
[  484.702493] docker0: port 1(veth4a5e368) entered disabled state