blob: 7fda698a104f3bb7f0f74a8923b1b57ebac4b68a [file] [log] [blame]
[ 0.000000] Linux version 4.19.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-14)) #1 SMP Debian 4.19.16-1 (2019-01-17)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-2-amd64 root=UUID=fecd1560-5f5f-4264-ad98-606e63141621 ro rootflags=subvol=@ quiet iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff1ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff20000-0x00000000c29fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023d5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 346034U/346034U, BIOS CBET4000 4.9-727-g358cbb3a30 02/15/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1795.819 MHz processor
[ 0.001576] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001579] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001585] last_pfn = 0x23d600 max_arch_pfn = 0x400000000
[ 0.001591] MTRR default type: write-back
[ 0.001592] MTRR fixed ranges enabled:
[ 0.001594] 00000-9FFFF write-back
[ 0.001595] A0000-BFFFF uncachable
[ 0.001596] C0000-FFFFF write-back
[ 0.001597] MTRR variable ranges enabled:
[ 0.001599] 0 base 0C0000000 mask FF0000000 uncachable
[ 0.001600] 1 base 0D0000000 mask FF0000000 write-combining
[ 0.001601] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.001602] 3 disabled
[ 0.001603] 4 disabled
[ 0.001603] 5 disabled
[ 0.001604] 6 disabled
[ 0.001605] 7 disabled
[ 0.001605] 8 disabled
[ 0.001606] 9 disabled
[ 0.002554] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002697] last_pfn = 0xbff20 max_arch_pfn = 0x400000000
[ 0.017912] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.017919] BRK [0x213201000, 0x213201fff] PGTABLE
[ 0.017922] BRK [0x213202000, 0x213202fff] PGTABLE
[ 0.017923] BRK [0x213203000, 0x213203fff] PGTABLE
[ 0.017963] BRK [0x213204000, 0x213204fff] PGTABLE
[ 0.017966] BRK [0x213205000, 0x213205fff] PGTABLE
[ 0.018088] BRK [0x213206000, 0x213206fff] PGTABLE
[ 0.018105] BRK [0x213207000, 0x213207fff] PGTABLE
[ 0.018137] BRK [0x213208000, 0x213208fff] PGTABLE
[ 0.018170] BRK [0x213209000, 0x213209fff] PGTABLE
[ 0.018187] BRK [0x21320a000, 0x21320afff] PGTABLE
[ 0.018204] BRK [0x21320b000, 0x21320bfff] PGTABLE
[ 0.018221] BRK [0x21320c000, 0x21320cfff] PGTABLE
[ 0.018256] RAMDISK: [mem 0x34673000-0x36330fff]
[ 0.018264] ACPI: Early table checksum verification disabled
[ 0.018351] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
[ 0.018356] ACPI: XSDT 0x00000000BFF440E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.018362] ACPI: FACP 0x00000000BFF47840 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.018370] ACPI: DSDT 0x00000000BFF44280 0035B1 (v02 COREv4 COREBOOT 20141018 INTL 20190108)
[ 0.018375] ACPI: FACS 0x00000000BFF44240 000040
[ 0.018378] ACPI: FACS 0x00000000BFF44240 000040
[ 0.018382] ACPI: SSDT 0x00000000BFF47940 0019E1 (v02 COREv4 COREBOOT 0000002A CORE 0000002A)
[ 0.018386] ACPI: MCFG 0x00000000BFF49330 00003C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.018390] ACPI: TCPA 0x00000000BFF49370 000032 (v02 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.018394] ACPI: APIC 0x00000000BFF493B0 00006C (v02 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.018398] ACPI: DMAR 0x00000000BFF49420 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.018402] ACPI: HPET 0x00000000BFF4B4F0 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.018412] ACPI: Local APIC address 0xfee00000
[ 0.018522] No NUMA configuration found
[ 0.018523] Faking a node at [mem 0x0000000000000000-0x000000023d5fffff]
[ 0.018527] NODE_DATA(0) allocated [mem 0x23d5fb000-0x23d5fffff]
[ 0.018563] Zone ranges:
[ 0.018564] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.018566] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.018567] Normal [mem 0x0000000100000000-0x000000023d5fffff]
[ 0.018568] Device empty
[ 0.018570] Movable zone start for each node
[ 0.018571] Early memory node ranges
[ 0.018572] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.018573] node 0: [mem 0x0000000000100000-0x00000000bff1ffff]
[ 0.018574] node 0: [mem 0x0000000100000000-0x000000023d5fffff]
[ 0.018578] Reserved but unavailable: 98 pages
[ 0.018580] Initmem setup node 0 [mem 0x0000000000001000-0x000000023d5fffff]
[ 0.018581] On node 0 totalpages: 2086078
[ 0.018583] DMA zone: 64 pages used for memmap
[ 0.018583] DMA zone: 21 pages reserved
[ 0.018585] DMA zone: 3998 pages, LIFO batch:0
[ 0.019388] DMA32 zone: 12221 pages used for memmap
[ 0.019389] DMA32 zone: 782112 pages, LIFO batch:63
[ 0.048730] Normal zone: 20312 pages used for memmap
[ 0.048733] Normal zone: 1299968 pages, LIFO batch:63
[ 0.095073] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff]
[ 0.095295] ACPI: PM-Timer IO Port: 0x508
[ 0.095298] ACPI: Local APIC address 0xfee00000
[ 0.095318] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.095321] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.095323] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.095325] ACPI: IRQ0 used by override.
[ 0.095326] ACPI: IRQ9 used by override.
[ 0.095329] Using ACPI (MADT) for SMP configuration information
[ 0.095331] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.095337] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.095350] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.095352] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.095353] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.095354] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.095355] PM: Registered nosave memory: [mem 0xbff20000-0xc29fffff]
[ 0.095356] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
[ 0.095357] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.095357] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.095358] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.095359] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.095360] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.095360] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.095362] [mem 0xc2a00000-0xefffffff] available for PCI devices
[ 0.095364] Booting paravirtualized kernel on bare hardware
[ 0.095367] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.243727] random: get_random_bytes called from start_kernel+0x93/0x531 with crng_init=0
[ 0.243737] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.243983] percpu: Embedded 44 pages/cpu @(____ptrval____) s143192 r8192 d28840 u524288
[ 0.243990] pcpu-alloc: s143192 r8192 d28840 u524288 alloc=1*2097152
[ 0.243991] pcpu-alloc: [0] 0 1 2 3
[ 0.244015] Built 1 zonelists, mobility grouping on. Total pages: 2053460
[ 0.244016] Policy zone: Normal
[ 0.244018] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-2-amd64 root=UUID=fecd1560-5f5f-4264-ad98-606e63141621 ro rootflags=subvol=@ quiet iomem=relaxed
[ 0.249125] Calgary: detecting Calgary via BIOS EBDA area
[ 0.249131] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.277853] Memory: 8092292K/8344312K available (10252K kernel code, 1236K rwdata, 3196K rodata, 1572K init, 2332K bss, 252020K reserved, 0K cma-reserved)
[ 0.277971] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.277979] Kernel/User page tables isolation: enabled
[ 0.278037] ftrace: allocating 31615 entries in 124 pages
[ 0.295883] rcu: Hierarchical RCU implementation.
[ 0.295886] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.295887] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.300156] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.300690] Console: colour dummy device 80x25
[ 0.300695] console [tty0] enabled
[ 0.300716] ACPI: Core revision 20180810
[ 0.300932] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.300944] hpet clockevent registered
[ 0.300949] APIC: Switch to symmetric I/O mode setup
[ 0.300951] DMAR: Host address width 36
[ 0.300953] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.300959] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.300960] DMAR: RMRR base: 0x000000c0800000 end: 0x000000c29fffff
[ 0.300961] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.300965] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.300967] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.300968] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.300970] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.301532] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.301534] x2apic enabled
[ 0.301542] Switched APIC routing to cluster x2apic.
[ 0.302009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.320952] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19e2bbe736e, max_idle_ns: 440795236513 ns
[ 0.320971] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.63 BogoMIPS (lpj=7183276)
[ 0.320974] pid_max: default: 32768 minimum: 301
[ 0.321012] Security Framework initialized
[ 0.321013] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.321035] AppArmor: AppArmor initialized
[ 0.322656] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.323486] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.323524] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.323551] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.323832] mce: CPU supports 7 MCE banks
[ 0.323844] CPU0: Thermal monitoring enabled (TM1)
[ 0.323857] process: using mwait in idle threads
[ 0.323861] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.323861] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.323864] Spectre V2 : Mitigation: Full generic retpoline
[ 0.323865] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.323865] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.323877] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.323878] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.323880] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.324126] Freeing SMP alternatives memory: 24K
[ 0.326595] TSC deadline timer enabled
[ 0.326599] smpboot: CPU0: Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.326721] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.326751] ... version: 3
[ 0.326751] ... bit width: 48
[ 0.326752] ... generic registers: 4
[ 0.326753] ... value mask: 0000ffffffffffff
[ 0.326754] ... max period: 00007fffffffffff
[ 0.326754] ... fixed-purpose events: 3
[ 0.326755] ... event mask: 000000070000000f
[ 0.326801] rcu: Hierarchical SRCU implementation.
[ 0.327573] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.327629] smp: Bringing up secondary CPUs ...
[ 0.327724] x86: Booting SMP configuration:
[ 0.327726] .... node #0, CPUs: #1 #2 #3
[ 0.335191] smp: Brought up 1 node, 4 CPUs
[ 0.335191] smpboot: Max logical packages: 1
[ 0.335191] smpboot: Total of 4 processors activated (14366.55 BogoMIPS)
[ 0.337264] devtmpfs: initialized
[ 0.337264] x86/mm: Memory block size: 128MB
[ 0.337887] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.337887] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.337887] pinctrl core: initialized pinctrl subsystem
[ 0.337887] NET: Registered protocol family 16
[ 0.337887] audit: initializing netlink subsys (disabled)
[ 0.337887] audit: type=2000 audit(1550405892.036:1): state=initialized audit_enabled=0 res=1
[ 0.337887] cpuidle: using governor ladder
[ 0.337887] cpuidle: using governor menu
[ 0.337887] ACPI: bus type PCI registered
[ 0.337887] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.337887] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.337887] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.337887] PCI: Using configuration type 1 for base access
[ 0.337887] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.338018] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.338018] ACPI: Added _OSI(Module Device)
[ 0.338018] ACPI: Added _OSI(Processor Device)
[ 0.338018] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.338018] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.338018] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.338018] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.343844] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.345772] ACPI: EC: EC started
[ 0.345772] ACPI: EC: interrupt blocked
[ 0.346091] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.346093] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.346096] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.346096] ACPI: Interpreter enabled
[ 0.346119] ACPI: (supports S0 S3 S4 S5)
[ 0.346120] ACPI: Using IOAPIC for interrupt routing
[ 0.346141] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.350648] ACPI: Power Resource [FPWR] (off)
[ 0.351039] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.351045] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.351106] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.351118] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.351189] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff])
[ 0.351382] PCI host bridge to bus 0000:00
[ 0.351385] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.351387] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.351389] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.351391] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.351392] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.351394] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.351396] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.351398] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.351400] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.351401] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.351403] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.351405] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.351407] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.351409] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.351410] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.351412] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xefffffff window]
[ 0.351414] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.351417] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.351428] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.351546] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.351561] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.351569] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.351575] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f]
[ 0.351672] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.351685] pci 0000:00:04.0: reg 0x10: [mem 0xe0610000-0xe0617fff 64bit]
[ 0.351812] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.351840] pci 0000:00:14.0: reg 0x10: [mem 0xe0600000-0xe060ffff 64bit]
[ 0.351917] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.352040] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.352139] pci 0000:00:16.0: reg 0x10: [mem 0xe0621000-0xe062100f 64bit]
[ 0.352477] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.352621] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.352646] pci 0000:00:1a.0: reg 0x10: [mem 0xe061e000-0xe061e3ff]
[ 0.352739] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.352833] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.352859] pci 0000:00:1b.0: reg 0x10: [mem 0xe0618000-0xe061bfff 64bit]
[ 0.352945] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.353048] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.353193] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.353311] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.353454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.353579] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.353604] pci 0000:00:1d.0: reg 0x10: [mem 0xe061f000-0xe061f3ff]
[ 0.353698] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.353798] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
[ 0.353997] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.354021] pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867]
[ 0.354031] pci 0000:00:1f.2: reg 0x14: [io 0x1870-0x1873]
[ 0.354040] pci 0000:00:1f.2: reg 0x18: [io 0x1868-0x186f]
[ 0.354050] pci 0000:00:1f.2: reg 0x1c: [io 0x1874-0x1877]
[ 0.354060] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
[ 0.354070] pci 0000:00:1f.2: reg 0x24: [mem 0xe061d000-0xe061d7ff]
[ 0.354122] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.354212] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.354234] pci 0000:00:1f.3: reg 0x10: [mem 0xe0620000-0xe06200ff 64bit]
[ 0.354257] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.354361] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.354388] pci 0000:00:1f.6: reg 0x10: [mem 0xe061c000-0xe061cfff 64bit]
[ 0.354628] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.354674] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.354727] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe04000ff]
[ 0.355045] pci 0000:01:00.0: supports D1 D2
[ 0.355047] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.355303] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.355310] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.355538] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
[ 0.355781] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0501fff 64bit]
[ 0.356613] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.357165] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.357175] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
[ 0.357372] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.357430] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.357485] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.357539] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.357591] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.357645] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.357698] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.357751] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.358564] ACPI: EC: interrupt unblocked
[ 0.358584] ACPI: EC: event unblocked
[ 0.358593] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.358595] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.358666] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.358666] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.358666] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.358666] vgaarb: loaded
[ 0.358666] pps_core: LinuxPPS API ver. 1 registered
[ 0.358666] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.358666] PTP clock support registered
[ 0.358666] EDAC MC: Ver: 3.0.0
[ 0.358666] PCI: Using ACPI for IRQ routing
[ 0.358709] PCI: pci_cache_line_size set to 64 bytes
[ 0.358836] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.358838] e820: reserve RAM buffer [mem 0xbff20000-0xbfffffff]
[ 0.358839] e820: reserve RAM buffer [mem 0x23d600000-0x23fffffff]
[ 0.361448] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.361456] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.363484] clocksource: Switched to clocksource tsc-early
[ 0.373733] VFS: Disk quotas dquot_6.6.0
[ 0.373754] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.373890] AppArmor: AppArmor Filesystem Enabled
[ 0.373912] pnp: PnP ACPI init
[ 0.374103] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.374106] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.374108] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.374110] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.374112] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.374115] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.374117] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.374119] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.374121] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.374123] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.374131] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.374606] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.374612] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.374662] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.374664] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.374669] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.374695] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.374732] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.374765] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.374799] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.374822] pnp: PnP ACPI: found 7 devices
[ 0.380953] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.380995] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.381003] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.381016] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.381023] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
[ 0.381037] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.381039] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.381042] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.381043] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.381045] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.381047] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.381049] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.381051] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.381053] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.381055] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.381057] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.381059] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.381061] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.381062] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.381064] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.381066] pci_bus 0000:00: resource 19 [mem 0xc2a00001-0xefffffff window]
[ 0.381068] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.381071] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[ 0.381073] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
[ 0.381166] NET: Registered protocol family 2
[ 0.381348] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.381383] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.381538] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.381687] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.381727] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.381758] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.381824] NET: Registered protocol family 1
[ 0.381840] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.382448] PCI: CLS 64 bytes, default 64
[ 0.382500] Unpacking initramfs...
[ 1.010987] Freeing initrd memory: 29432K
[ 1.029001] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.029004] software IO TLB: mapped [mem 0xbbf20000-0xbff20000] (64MB)
[ 1.029820] Initialise system trusted keyrings
[ 1.029874] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 1.031436] zbud: loaded
[ 1.031774] pstore: using deflate compression
[ 1.267632] Key type asymmetric registered
[ 1.267633] Asymmetric key parser 'x509' registered
[ 1.267648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.267685] io scheduler noop registered
[ 1.267686] io scheduler deadline registered
[ 1.267730] io scheduler cfq registered (default)
[ 1.267731] io scheduler mq-deadline registered
[ 1.268380] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[ 1.268406] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[ 1.268440] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.268461] intel_idle: MWAIT substates: 0x21120
[ 1.268462] intel_idle: v0.4.1 model 0x3A
[ 1.268680] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.269274] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.269806] Linux agpgart interface v0.103
[ 1.269868] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.269869] AMD IOMMUv2 functionality not available on this system
[ 1.270236] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.272093] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.272098] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.272463] mousedev: PS/2 mouse device common for all mice
[ 1.272532] rtc_cmos 00:03: RTC can wake from S4
[ 1.272722] rtc_cmos 00:03: registered as rtc0
[ 1.272745] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.272760] intel_pstate: Intel P-state driver initializing
[ 1.273051] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.273904] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.274255] NET: Registered protocol family 10
[ 1.285374] Segment Routing with IPv6
[ 1.285435] mip6: Mobile IPv6
[ 1.285440] NET: Registered protocol family 17
[ 1.285450] mpls_gso: MPLS GSO support
[ 1.286227] microcode: sig=0x306a9, pf=0x10, revision=0x20
[ 1.286477] microcode: Microcode Update Driver: v2.2.
[ 1.286508] sched_clock: Marking stable (1285849445, 608788)->(1293047863, -6589630)
[ 1.286801] registered taskstats version 1
[ 1.286801] Loading compiled-in X.509 certificates
[ 1.322518] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[ 1.322533] zswap: loaded using pool lzo/zbud
[ 1.322628] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.322940] rtc_cmos 00:03: setting system clock to 2019-02-17 12:18:13 UTC (1550405893)
[ 1.324224] Freeing unused kernel image memory: 1572K
[ 1.349026] Write protecting the kernel read-only data: 16384k
[ 1.350100] Freeing unused kernel image memory: 2028K
[ 1.350547] Freeing unused kernel image memory: 900K
[ 1.367478] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.367479] x86/mm: Checking user space page tables
[ 1.374219] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.374220] Run /init as init process
[ 1.497583] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.497586] ACPI: Thermal Zone [THM0] (46 C)
[ 1.498334] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.498335] ACPI: Thermal Zone [THM1] (27 C)
[ 1.509742] ACPI: bus type USB registered
[ 1.509771] usbcore: registered new interface driver usbfs
[ 1.509783] usbcore: registered new interface driver hub
[ 1.509815] usbcore: registered new device driver usb
[ 1.517246] sdhci: Secure Digital Host Controller Interface driver
[ 1.517247] sdhci: Copyright(c) Pierre Ossman
[ 1.518712] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.519730] ehci-pci: EHCI PCI platform driver
[ 1.520540] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.520553] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.520570] ehci-pci 0000:00:1a.0: debug port 2
[ 1.520793] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.521207] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.524475] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.525047] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe061e000
[ 1.526889] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20180810/utaddress-213)
[ 1.526898] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.526906] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180810/utaddress-213)
[ 1.526912] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.526960] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180810/utaddress-213)
[ 1.526966] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.526972] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180810/utaddress-213)
[ 1.526977] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.526977] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.527134] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.527462] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.535024] cryptd: max_cpu_qlen set to 1000
[ 1.535722] SCSI subsystem initialized
[ 1.544712] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.544719] AVX version of gcm_enc/dec engaged.
[ 1.544720] AES CTR mode by8 optimization enabled
[ 1.544821] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.544824] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.544826] usb usb1: Product: EHCI Host Controller
[ 1.544828] usb usb1: Manufacturer: Linux 4.19.0-2-amd64 ehci_hcd
[ 1.544829] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.546315] hub 1-0:1.0: USB hub found
[ 1.546326] hub 1-0:1.0: 3 ports detected
[ 1.547895] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.547905] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.548227] libata version 3.00 loaded.
[ 1.548988] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.548995] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.549192] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.549194] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.549196] usb usb2: Product: xHCI Host Controller
[ 1.549198] usb usb2: Manufacturer: Linux 4.19.0-2-amd64 xhci-hcd
[ 1.549200] usb usb2: SerialNumber: 0000:00:14.0
[ 1.549418] hub 2-0:1.0: USB hub found
[ 1.549433] hub 2-0:1.0: 4 ports detected
[ 1.549632] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.549634] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.549640] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.549641] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.549646] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.549655] ehci-pci 0000:00:1d.0: debug port 2
[ 1.549713] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 1.549716] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.549717] usb usb4: Product: xHCI Host Controller
[ 1.549719] usb usb4: Manufacturer: Linux 4.19.0-2-amd64 xhci-hcd
[ 1.549721] usb usb4: SerialNumber: 0000:00:14.0
[ 1.549844] hub 4-0:1.0: USB hub found
[ 1.549858] hub 4-0:1.0: 4 ports detected
[ 1.553558] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.553591] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe061f000
[ 1.557203] ahci 0000:00:1f.2: version 3.0
[ 1.557411] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.567507] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.567513] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.568340] scsi host0: ahci
[ 1.568512] scsi host1: ahci
[ 1.569458] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.569528] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.569531] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.569533] usb usb3: Product: EHCI Host Controller
[ 1.569534] usb usb3: Manufacturer: Linux 4.19.0-2-amd64 ehci_hcd
[ 1.569536] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.569758] hub 3-0:1.0: USB hub found
[ 1.569771] hub 3-0:1.0: 3 ports detected
[ 1.569837] scsi host2: ahci
[ 1.573678] scsi host3: ahci
[ 1.574041] scsi host4: ahci
[ 1.574297] scsi host5: ahci
[ 1.574382] ata1: SATA max UDMA/133 abar m2048@0xe061d000 port 0xe061d100 irq 29
[ 1.574383] ata2: DUMMY
[ 1.574387] ata3: SATA max UDMA/133 abar m2048@0xe061d000 port 0xe061d200 irq 29
[ 1.574388] ata4: DUMMY
[ 1.574388] ata5: DUMMY
[ 1.574390] ata6: DUMMY
[ 1.579891] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[ 1.616886] [drm] Replacing VGA console driver
[ 1.669095] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.669100] [drm] Driver supports precise vblank timestamp query.
[ 1.669993] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.793364] random: fast init done
[ 1.795827] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 1.795978] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.818188] acpi device:0d: registered as cooling_device5
[ 1.818276] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.885006] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.887675] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.895175] ata1.00: ATA-9: TS240GMTS420S, Q1121A0, max UDMA/133
[ 1.895177] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.904972] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.913123] ata1.00: configured for UDMA/133
[ 1.924767] scsi 0:0:0:0: Direct-Access ATA TS240GMTS420S 1A0 PQ: 0 ANSI: 5
[ 2.041392] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.041394] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.041650] hub 1-1:1.0: USB hub found
[ 2.041740] hub 1-1:1.0: 6 ports detected
[ 2.061162] tsc: Refined TSC clocksource calibration: 1795.920 MHz
[ 2.061177] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31b7216c, max_idle_ns: 440795249889 ns
[ 2.061290] clocksource: Switched to clocksource tsc
[ 2.061539] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 2.061554] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.061988] hub 3-1:1.0: USB hub found
[ 2.062138] hub 3-1:1.0: 8 ports detected
[ 2.133258] fbcon: inteldrmfb (fb0) is primary device
[ 2.240471] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.329077] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.330210] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4732]
[ 2.361015] psmouse serio1: synaptics: queried min coordinates: x [1264..], y [1124..]
[ 2.361028] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[ 2.421007] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00/0x0, board id: 2182, fw id: 1164733
[ 2.421027] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.439138] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[ 2.439145] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.439149] usb 1-1.3: Product: Biometric Coprocessor
[ 2.439152] usb 1-1.3: Manufacturer: Auth
[ 2.459347] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 2.517083] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 2.690129] usb 1-1.6: New USB device found, idVendor=5986, idProduct=0266, bcdDevice=14.12
[ 2.690136] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.690140] usb 1-1.6: Product: Integrated Camera
[ 2.690144] usb 1-1.6: Manufacturer: SunplusIT INC.
[ 2.946423] Console: switching to colour frame buffer device 200x56
[ 2.972525] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.000200] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 3.000210] sd 0:0:0:0: [sda] Write Protect is off
[ 3.000213] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.000226] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.005730] sda: sda1 sda2 sda3 sda4
[ 3.006028] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.062706] device-mapper: uevent: version 1.0.3
[ 3.062921] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 3.097008] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 3.428621] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input4
[ 7.297311] random: crng init done
[ 9.661229] NET: Registered protocol family 38
[ 9.876968] raid6: sse2x1 gen() 8417 MB/s
[ 9.944961] raid6: sse2x1 xor() 6078 MB/s
[ 10.012964] raid6: sse2x2 gen() 10048 MB/s
[ 10.080963] raid6: sse2x2 xor() 6760 MB/s
[ 10.148959] raid6: sse2x4 gen() 11964 MB/s
[ 10.216964] raid6: sse2x4 xor() 7948 MB/s
[ 10.216965] raid6: using algorithm sse2x4 gen() 11964 MB/s
[ 10.216965] raid6: .... xor() 7948 MB/s, rmw enabled
[ 10.216966] raid6: using ssse3x2 recovery algorithm
[ 10.224517] xor: automatically using best checksumming function avx
[ 10.265034] Btrfs loaded, crc32c=crc32c-intel
[ 10.310470] BTRFS: device label root devid 1 transid 1034 /dev/mapper/sda4_crypt
[ 10.341416] BTRFS info (device dm-0): disk space caching is enabled
[ 10.341419] BTRFS info (device dm-0): has skinny extents
[ 10.390707] BTRFS info (device dm-0): enabling ssd optimizations
[ 10.672159] systemd[1]: Inserted module 'autofs4'
[ 10.686823] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 10.705382] systemd[1]: Detected architecture x86-64.
[ 10.713191] systemd[1]: Set hostname to <debianLaptop>.
[ 10.724097] systemd-fstab-generator[330]: Failed to create unit file /run/systemd/generator/-.mount, as it already exists. Duplicate entry in /etc/fstab?
[ 10.820647] systemd[1]: Created slice User and Session Slice.
[ 10.820723] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 10.821071] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 10.821090] systemd[1]: Reached target Remote File Systems.
[ 10.821132] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 10.821244] systemd[1]: Listening on udev Control Socket.
[ 10.821255] systemd[1]: Reached target Swap.
[ 10.851600] BTRFS info (device dm-0): turning on discard
[ 10.851604] BTRFS info (device dm-0): disk space caching is enabled
[ 10.852692] BTRFS info (device dm-0): disk space caching is enabled
[ 10.862158] lp: driver loaded but no devices found
[ 10.866231] ppdev: user-space parallel port driver
[ 10.972249] systemd-journald[349]: Received request to flush runtime journal from PID 1
[ 11.041953] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input5
[ 11.042095] ACPI: Sleep Button [SLPB]
[ 11.042188] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input6
[ 11.042567] ACPI: Lid Switch [LID]
[ 11.042641] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 11.042655] ACPI: Power Button [PWRF]
[ 11.078938] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 11.079073] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 11.092520] ACPI: AC Adapter [AC] (off-line)
[ 11.093102] iTCO_vendor_support: vendor-support=0
[ 11.125870] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 11.126336] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.126387] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 11.127913] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.139205] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 11.139207] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 11.139208] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 11.139209] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 11.140533] Non-volatile memory driver v1.3
[ 11.140776] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.161618] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 11.174489] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 11.174490] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 11.174491] thinkpad_acpi: ThinkPad BIOS CBET4000 4.9-727-g358cbb3a30, EC G6HT24WW-3.22
[ 11.174492] thinkpad_acpi: Lenovo ThinkPad X1 Carbon, model 346034U
[ 11.175161] thinkpad_acpi: radio switch found; radios are enabled
[ 11.175246] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 11.175266] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 11.175266] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 11.237412] media: Linux media interface: v0.10
[ 11.269746] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 11.270108] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 11.271603] thinkpad_acpi: battery 1 registered (start 0, stop 0)
[ 11.271609] battery: new extension: ThinkPad Battery Extension
[ 11.271677] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[ 11.272252] Intel(R) Wireless WiFi driver for Linux
[ 11.272253] Copyright(c) 2003- 2015 Intel Corporation
[ 11.273834] videodev: Linux video capture interface: v2.00
[ 11.290027] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[ 11.290159] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.290276] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 11.334980] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0266)
[ 11.341160] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.341163] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.341165] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 11.341167] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.341168] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.341171] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 11.341173] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 11.365062] intel_rapl: Found RAPL domain package
[ 11.365065] intel_rapl: Found RAPL domain core
[ 11.365066] intel_rapl: Found RAPL domain uncore
[ 11.372508] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 11.372512] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 11.372514] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 11.372516] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 11.372821] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input13
[ 11.372918] usbcore: registered new interface driver uvcvideo
[ 11.372919] USB Video Class driver (1.1.1)
[ 11.380811] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 11.382336] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.382421] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.382492] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 11.416043] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 11.416045] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 11.416047] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 11.416050] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205S AGN, REV=0xB0
[ 11.460857] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 11.464440] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 11.643557] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 11.675954] audit: type=1400 audit(1550405903.846:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=503 comm="apparmor_parser"
[ 11.675959] audit: type=1400 audit(1550405903.846:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=503 comm="apparmor_parser"
[ 11.675962] audit: type=1400 audit(1550405903.846:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=503 comm="apparmor_parser"
[ 11.677312] audit: type=1400 audit(1550405903.850:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=505 comm="apparmor_parser"
[ 11.679382] audit: type=1400 audit(1550405903.850:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=507 comm="apparmor_parser"
[ 11.679569] audit: type=1400 audit(1550405903.850:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=504 comm="apparmor_parser"
[ 11.679573] audit: type=1400 audit(1550405903.850:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=504 comm="apparmor_parser"
[ 11.679577] audit: type=1400 audit(1550405903.850:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=504 comm="apparmor_parser"
[ 11.679905] audit: type=1400 audit(1550405903.850:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=508 comm="apparmor_parser"
[ 11.681731] audit: type=1400 audit(1550405903.854:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=510 comm="apparmor_parser"
[ 12.235090] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 12.247872] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 12.555112] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 12.637707] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 12.664286] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 12.962805] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 13.056376] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 13.133083] mei_me 0000:00:16.0: wait hw ready failed
[ 13.133091] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 13.133123] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 13.153675] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 15.149007] mei_me 0000:00:16.0: wait hw ready failed
[ 15.149014] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 15.149034] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 16.374625] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 16.675265] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 16.759546] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 17.164985] mei_me 0000:00:16.0: wait hw ready failed
[ 17.164993] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 17.165001] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 17.165003] mei_me 0000:00:16.0: reset failed ret = -19
[ 17.165006] mei_me 0000:00:16.0: link layer initialization failed.
[ 17.165009] mei_me 0000:00:16.0: init hw failure.
[ 17.165069] mei_me 0000:00:16.0: initialization failed.
[ 19.908389] wlp2s0: authenticate with 44:e9:dd:fd:25:50
[ 19.910683] wlp2s0: send auth to 44:e9:dd:fd:25:50 (try 1/3)
[ 19.913895] wlp2s0: authenticated
[ 19.916986] wlp2s0: associate with 44:e9:dd:fd:25:50 (try 1/3)
[ 19.921033] wlp2s0: RX AssocResp from 44:e9:dd:fd:25:50 (capab=0x431 status=0 aid=2)
[ 19.938401] wlp2s0: associated
[ 20.051679] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 21.967749] fuse init (API version 7.27)
[ 23.649040] rfkill: input handler disabled
[ 392.316135] BTRFS warning (device dm-0): block group 34381758464 has wrong amount of free space
[ 392.316137] BTRFS warning (device dm-0): failed to load free space cache for block group 34381758464, rebuilding it now