[    0.000000] Linux version 4.19.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-14)) #1 SMP Debian 4.19.16-1 (2019-01-17)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.0-2-amd64 root=UUID=fecd1560-5f5f-4264-ad98-606e63141621 ro rootflags=subvol=@ quiet iomem=relaxed
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff1ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff20000-0x00000000c29fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023d5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 346034U/346034U, BIOS CBET4000 4.9-727-g358cbb3a30 02/15/2019
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1795.819 MHz processor
[    0.001576] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001579] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001585] last_pfn = 0x23d600 max_arch_pfn = 0x400000000
[    0.001591] MTRR default type: write-back
[    0.001592] MTRR fixed ranges enabled:
[    0.001594]   00000-9FFFF write-back
[    0.001595]   A0000-BFFFF uncachable
[    0.001596]   C0000-FFFFF write-back
[    0.001597] MTRR variable ranges enabled:
[    0.001599]   0 base 0C0000000 mask FF0000000 uncachable
[    0.001600]   1 base 0D0000000 mask FF0000000 write-combining
[    0.001601]   2 base 0E0000000 mask FE0000000 uncachable
[    0.001602]   3 disabled
[    0.001603]   4 disabled
[    0.001603]   5 disabled
[    0.001604]   6 disabled
[    0.001605]   7 disabled
[    0.001605]   8 disabled
[    0.001606]   9 disabled
[    0.002554] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002697] last_pfn = 0xbff20 max_arch_pfn = 0x400000000
[    0.017912] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[    0.017919] BRK [0x213201000, 0x213201fff] PGTABLE
[    0.017922] BRK [0x213202000, 0x213202fff] PGTABLE
[    0.017923] BRK [0x213203000, 0x213203fff] PGTABLE
[    0.017963] BRK [0x213204000, 0x213204fff] PGTABLE
[    0.017966] BRK [0x213205000, 0x213205fff] PGTABLE
[    0.018088] BRK [0x213206000, 0x213206fff] PGTABLE
[    0.018105] BRK [0x213207000, 0x213207fff] PGTABLE
[    0.018137] BRK [0x213208000, 0x213208fff] PGTABLE
[    0.018170] BRK [0x213209000, 0x213209fff] PGTABLE
[    0.018187] BRK [0x21320a000, 0x21320afff] PGTABLE
[    0.018204] BRK [0x21320b000, 0x21320bfff] PGTABLE
[    0.018221] BRK [0x21320c000, 0x21320cfff] PGTABLE
[    0.018256] RAMDISK: [mem 0x34673000-0x36330fff]
[    0.018264] ACPI: Early table checksum verification disabled
[    0.018351] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
[    0.018356] ACPI: XSDT 0x00000000BFF440E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.018362] ACPI: FACP 0x00000000BFF47840 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.018370] ACPI: DSDT 0x00000000BFF44280 0035B1 (v02 COREv4 COREBOOT 20141018 INTL 20190108)
[    0.018375] ACPI: FACS 0x00000000BFF44240 000040
[    0.018378] ACPI: FACS 0x00000000BFF44240 000040
[    0.018382] ACPI: SSDT 0x00000000BFF47940 0019E1 (v02 COREv4 COREBOOT 0000002A CORE 0000002A)
[    0.018386] ACPI: MCFG 0x00000000BFF49330 00003C (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.018390] ACPI: TCPA 0x00000000BFF49370 000032 (v02 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.018394] ACPI: APIC 0x00000000BFF493B0 00006C (v02 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.018398] ACPI: DMAR 0x00000000BFF49420 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.018402] ACPI: HPET 0x00000000BFF4B4F0 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[    0.018412] ACPI: Local APIC address 0xfee00000
[    0.018522] No NUMA configuration found
[    0.018523] Faking a node at [mem 0x0000000000000000-0x000000023d5fffff]
[    0.018527] NODE_DATA(0) allocated [mem 0x23d5fb000-0x23d5fffff]
[    0.018563] Zone ranges:
[    0.018564]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.018566]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.018567]   Normal   [mem 0x0000000100000000-0x000000023d5fffff]
[    0.018568]   Device   empty
[    0.018570] Movable zone start for each node
[    0.018571] Early memory node ranges
[    0.018572]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.018573]   node   0: [mem 0x0000000000100000-0x00000000bff1ffff]
[    0.018574]   node   0: [mem 0x0000000100000000-0x000000023d5fffff]
[    0.018578] Reserved but unavailable: 98 pages
[    0.018580] Initmem setup node 0 [mem 0x0000000000001000-0x000000023d5fffff]
[    0.018581] On node 0 totalpages: 2086078
[    0.018583]   DMA zone: 64 pages used for memmap
[    0.018583]   DMA zone: 21 pages reserved
[    0.018585]   DMA zone: 3998 pages, LIFO batch:0
[    0.019388]   DMA32 zone: 12221 pages used for memmap
[    0.019389]   DMA32 zone: 782112 pages, LIFO batch:63
[    0.048730]   Normal zone: 20312 pages used for memmap
[    0.048733]   Normal zone: 1299968 pages, LIFO batch:63
[    0.095073] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff]
[    0.095295] ACPI: PM-Timer IO Port: 0x508
[    0.095298] ACPI: Local APIC address 0xfee00000
[    0.095318] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.095321] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.095323] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.095325] ACPI: IRQ0 used by override.
[    0.095326] ACPI: IRQ9 used by override.
[    0.095329] Using ACPI (MADT) for SMP configuration information
[    0.095331] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.095337] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.095350] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.095352] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.095353] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.095354] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.095355] PM: Registered nosave memory: [mem 0xbff20000-0xc29fffff]
[    0.095356] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
[    0.095357] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.095357] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[    0.095358] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.095359] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.095360] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.095360] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.095362] [mem 0xc2a00000-0xefffffff] available for PCI devices
[    0.095364] Booting paravirtualized kernel on bare hardware
[    0.095367] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.243727] random: get_random_bytes called from start_kernel+0x93/0x531 with crng_init=0
[    0.243737] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.243983] percpu: Embedded 44 pages/cpu @(____ptrval____) s143192 r8192 d28840 u524288
[    0.243990] pcpu-alloc: s143192 r8192 d28840 u524288 alloc=1*2097152
[    0.243991] pcpu-alloc: [0] 0 1 2 3 
[    0.244015] Built 1 zonelists, mobility grouping on.  Total pages: 2053460
[    0.244016] Policy zone: Normal
[    0.244018] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.0-2-amd64 root=UUID=fecd1560-5f5f-4264-ad98-606e63141621 ro rootflags=subvol=@ quiet iomem=relaxed
[    0.249125] Calgary: detecting Calgary via BIOS EBDA area
[    0.249131] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.277853] Memory: 8092292K/8344312K available (10252K kernel code, 1236K rwdata, 3196K rodata, 1572K init, 2332K bss, 252020K reserved, 0K cma-reserved)
[    0.277971] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.277979] Kernel/User page tables isolation: enabled
[    0.278037] ftrace: allocating 31615 entries in 124 pages
[    0.295883] rcu: Hierarchical RCU implementation.
[    0.295886] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.295887] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.300156] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[    0.300690] Console: colour dummy device 80x25
[    0.300695] console [tty0] enabled
[    0.300716] ACPI: Core revision 20180810
[    0.300932] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.300944] hpet clockevent registered
[    0.300949] APIC: Switch to symmetric I/O mode setup
[    0.300951] DMAR: Host address width 36
[    0.300953] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.300959] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.300960] DMAR: RMRR base: 0x000000c0800000 end: 0x000000c29fffff
[    0.300961] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.300965] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.300967] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.300968] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.300970] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.301532] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.301534] x2apic enabled
[    0.301542] Switched APIC routing to cluster x2apic.
[    0.302009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.320952] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19e2bbe736e, max_idle_ns: 440795236513 ns
[    0.320971] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.63 BogoMIPS (lpj=7183276)
[    0.320974] pid_max: default: 32768 minimum: 301
[    0.321012] Security Framework initialized
[    0.321013] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.321035] AppArmor: AppArmor initialized
[    0.322656] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.323486] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.323524] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.323551] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.323832] mce: CPU supports 7 MCE banks
[    0.323844] CPU0: Thermal monitoring enabled (TM1)
[    0.323857] process: using mwait in idle threads
[    0.323861] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.323861] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.323864] Spectre V2 : Mitigation: Full generic retpoline
[    0.323865] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.323865] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.323877] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.323878] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.323880] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.324126] Freeing SMP alternatives memory: 24K
[    0.326595] TSC deadline timer enabled
[    0.326599] smpboot: CPU0: Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.326721] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.326751] ... version:                3
[    0.326751] ... bit width:              48
[    0.326752] ... generic registers:      4
[    0.326753] ... value mask:             0000ffffffffffff
[    0.326754] ... max period:             00007fffffffffff
[    0.326754] ... fixed-purpose events:   3
[    0.326755] ... event mask:             000000070000000f
[    0.326801] rcu: Hierarchical SRCU implementation.
[    0.327573] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.327629] smp: Bringing up secondary CPUs ...
[    0.327724] x86: Booting SMP configuration:
[    0.327726] .... node  #0, CPUs:      #1 #2 #3
[    0.335191] smp: Brought up 1 node, 4 CPUs
[    0.335191] smpboot: Max logical packages: 1
[    0.335191] smpboot: Total of 4 processors activated (14366.55 BogoMIPS)
[    0.337264] devtmpfs: initialized
[    0.337264] x86/mm: Memory block size: 128MB
[    0.337887] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.337887] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.337887] pinctrl core: initialized pinctrl subsystem
[    0.337887] NET: Registered protocol family 16
[    0.337887] audit: initializing netlink subsys (disabled)
[    0.337887] audit: type=2000 audit(1550405892.036:1): state=initialized audit_enabled=0 res=1
[    0.337887] cpuidle: using governor ladder
[    0.337887] cpuidle: using governor menu
[    0.337887] ACPI: bus type PCI registered
[    0.337887] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.337887] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.337887] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.337887] PCI: Using configuration type 1 for base access
[    0.337887] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.338018] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.338018] ACPI: Added _OSI(Module Device)
[    0.338018] ACPI: Added _OSI(Processor Device)
[    0.338018] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.338018] ACPI: Added _OSI(Processor Aggregator Device)
[    0.338018] ACPI: Added _OSI(Linux-Dell-Video)
[    0.338018] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.343844] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.345772] ACPI: EC: EC started
[    0.345772] ACPI: EC: interrupt blocked
[    0.346091] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.346093] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.346096] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.346096] ACPI: Interpreter enabled
[    0.346119] ACPI: (supports S0 S3 S4 S5)
[    0.346120] ACPI: Using IOAPIC for interrupt routing
[    0.346141] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.350648] ACPI: Power Resource [FPWR] (off)
[    0.351039] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.351045] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.351106] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.351118] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.351189] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff])
[    0.351382] PCI host bridge to bus 0000:00
[    0.351385] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.351387] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.351389] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.351391] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.351392] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.351394] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.351396] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.351398] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.351400] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.351401] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.351403] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.351405] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.351407] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.351409] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.351410] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.351412] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xefffffff window]
[    0.351414] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.351417] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.351428] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.351546] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.351561] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[    0.351569] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.351575] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x183f]
[    0.351672] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[    0.351685] pci 0000:00:04.0: reg 0x10: [mem 0xe0610000-0xe0617fff 64bit]
[    0.351812] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.351840] pci 0000:00:14.0: reg 0x10: [mem 0xe0600000-0xe060ffff 64bit]
[    0.351917] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.352040] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.352139] pci 0000:00:16.0: reg 0x10: [mem 0xe0621000-0xe062100f 64bit]
[    0.352477] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.352621] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.352646] pci 0000:00:1a.0: reg 0x10: [mem 0xe061e000-0xe061e3ff]
[    0.352739] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.352833] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.352859] pci 0000:00:1b.0: reg 0x10: [mem 0xe0618000-0xe061bfff 64bit]
[    0.352945] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.353048] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.353193] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.353311] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.353454] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.353579] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.353604] pci 0000:00:1d.0: reg 0x10: [mem 0xe061f000-0xe061f3ff]
[    0.353698] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.353798] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
[    0.353997] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.354021] pci 0000:00:1f.2: reg 0x10: [io  0x1860-0x1867]
[    0.354031] pci 0000:00:1f.2: reg 0x14: [io  0x1870-0x1873]
[    0.354040] pci 0000:00:1f.2: reg 0x18: [io  0x1868-0x186f]
[    0.354050] pci 0000:00:1f.2: reg 0x1c: [io  0x1874-0x1877]
[    0.354060] pci 0000:00:1f.2: reg 0x20: [io  0x1840-0x185f]
[    0.354070] pci 0000:00:1f.2: reg 0x24: [mem 0xe061d000-0xe061d7ff]
[    0.354122] pci 0000:00:1f.2: PME# supported from D3hot
[    0.354212] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.354234] pci 0000:00:1f.3: reg 0x10: [mem 0xe0620000-0xe06200ff 64bit]
[    0.354257] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.354361] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[    0.354388] pci 0000:00:1f.6: reg 0x10: [mem 0xe061c000-0xe061cfff 64bit]
[    0.354628] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[    0.354674] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[    0.354727] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe04000ff]
[    0.355045] pci 0000:01:00.0: supports D1 D2
[    0.355047] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.355303] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.355310] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.355538] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
[    0.355781] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0501fff 64bit]
[    0.356613] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.357165] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.357175] pci 0000:00:1c.1:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.357372] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.357430] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.357485] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.357539] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.357591] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.357645] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.357698] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.357751] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.358564] ACPI: EC: interrupt unblocked
[    0.358584] ACPI: EC: event unblocked
[    0.358593] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.358595] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.358666] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.358666] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.358666] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.358666] vgaarb: loaded
[    0.358666] pps_core: LinuxPPS API ver. 1 registered
[    0.358666] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.358666] PTP clock support registered
[    0.358666] EDAC MC: Ver: 3.0.0
[    0.358666] PCI: Using ACPI for IRQ routing
[    0.358709] PCI: pci_cache_line_size set to 64 bytes
[    0.358836] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.358838] e820: reserve RAM buffer [mem 0xbff20000-0xbfffffff]
[    0.358839] e820: reserve RAM buffer [mem 0x23d600000-0x23fffffff]
[    0.361448] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.361456] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.363484] clocksource: Switched to clocksource tsc-early
[    0.373733] VFS: Disk quotas dquot_6.6.0
[    0.373754] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.373890] AppArmor: AppArmor Filesystem Enabled
[    0.373912] pnp: PnP ACPI init
[    0.374103] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.374106] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.374108] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.374110] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.374112] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.374115] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.374117] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.374119] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.374121] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.374123] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.374131] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.374606] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.374612] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.374662] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.374664] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.374669] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.374695] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.374732] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.374765] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.374799] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.374822] pnp: PnP ACPI: found 7 devices
[    0.380953] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.380995] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.381003] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
[    0.381016] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.381023] pci 0000:00:1c.1:   bridge window [mem 0xe0500000-0xe05fffff]
[    0.381037] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.381039] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.381042] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.381043] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.381045] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.381047] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.381049] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.381051] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.381053] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.381055] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.381057] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.381059] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.381061] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.381062] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.381064] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.381066] pci_bus 0000:00: resource 19 [mem 0xc2a00001-0xefffffff window]
[    0.381068] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.381071] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[    0.381073] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
[    0.381166] NET: Registered protocol family 2
[    0.381348] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.381383] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.381538] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.381687] TCP: Hash tables configured (established 65536 bind 65536)
[    0.381727] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.381758] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.381824] NET: Registered protocol family 1
[    0.381840] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.382448] PCI: CLS 64 bytes, default 64
[    0.382500] Unpacking initramfs...
[    1.010987] Freeing initrd memory: 29432K
[    1.029001] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.029004] software IO TLB: mapped [mem 0xbbf20000-0xbff20000] (64MB)
[    1.029820] Initialise system trusted keyrings
[    1.029874] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.031436] zbud: loaded
[    1.031774] pstore: using deflate compression
[    1.267632] Key type asymmetric registered
[    1.267633] Asymmetric key parser 'x509' registered
[    1.267648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.267685] io scheduler noop registered
[    1.267686] io scheduler deadline registered
[    1.267730] io scheduler cfq registered (default)
[    1.267731] io scheduler mq-deadline registered
[    1.268380] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[    1.268406] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[    1.268440] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.268461] intel_idle: MWAIT substates: 0x21120
[    1.268462] intel_idle: v0.4.1 model 0x3A
[    1.268680] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.269274] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.269806] Linux agpgart interface v0.103
[    1.269868] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.269869] AMD IOMMUv2 functionality not available on this system
[    1.270236] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.272093] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.272098] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.272463] mousedev: PS/2 mouse device common for all mice
[    1.272532] rtc_cmos 00:03: RTC can wake from S4
[    1.272722] rtc_cmos 00:03: registered as rtc0
[    1.272745] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.272760] intel_pstate: Intel P-state driver initializing
[    1.273051] ledtrig-cpu: registered to indicate activity on CPUs
[    1.273904] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.274255] NET: Registered protocol family 10
[    1.285374] Segment Routing with IPv6
[    1.285435] mip6: Mobile IPv6
[    1.285440] NET: Registered protocol family 17
[    1.285450] mpls_gso: MPLS GSO support
[    1.286227] microcode: sig=0x306a9, pf=0x10, revision=0x20
[    1.286477] microcode: Microcode Update Driver: v2.2.
[    1.286508] sched_clock: Marking stable (1285849445, 608788)->(1293047863, -6589630)
[    1.286801] registered taskstats version 1
[    1.286801] Loading compiled-in X.509 certificates
[    1.322518] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[    1.322533] zswap: loaded using pool lzo/zbud
[    1.322628] AppArmor: AppArmor sha1 policy hashing enabled
[    1.322940] rtc_cmos 00:03: setting system clock to 2019-02-17 12:18:13 UTC (1550405893)
[    1.324224] Freeing unused kernel image memory: 1572K
[    1.349026] Write protecting the kernel read-only data: 16384k
[    1.350100] Freeing unused kernel image memory: 2028K
[    1.350547] Freeing unused kernel image memory: 900K
[    1.367478] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.367479] x86/mm: Checking user space page tables
[    1.374219] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.374220] Run /init as init process
[    1.497583] thermal LNXTHERM:00: registered as thermal_zone0
[    1.497586] ACPI: Thermal Zone [THM0] (46 C)
[    1.498334] thermal LNXTHERM:01: registered as thermal_zone1
[    1.498335] ACPI: Thermal Zone [THM1] (27 C)
[    1.509742] ACPI: bus type USB registered
[    1.509771] usbcore: registered new interface driver usbfs
[    1.509783] usbcore: registered new interface driver hub
[    1.509815] usbcore: registered new device driver usb
[    1.517246] sdhci: Secure Digital Host Controller Interface driver
[    1.517247] sdhci: Copyright(c) Pierre Ossman
[    1.518712] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.519730] ehci-pci: EHCI PCI platform driver
[    1.520540] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.520553] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.520570] ehci-pci 0000:00:1a.0: debug port 2
[    1.520793] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[    1.521207] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    1.524475] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.525047] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe061e000
[    1.526889] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20180810/utaddress-213)
[    1.526898] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.526906] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180810/utaddress-213)
[    1.526912] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.526960] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180810/utaddress-213)
[    1.526966] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.526972] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180810/utaddress-213)
[    1.526977] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.526977] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.527134] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.527462] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[    1.535024] cryptd: max_cpu_qlen set to 1000
[    1.535722] SCSI subsystem initialized
[    1.544712] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.544719] AVX version of gcm_enc/dec engaged.
[    1.544720] AES CTR mode by8 optimization enabled
[    1.544821] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.544824] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.544826] usb usb1: Product: EHCI Host Controller
[    1.544828] usb usb1: Manufacturer: Linux 4.19.0-2-amd64 ehci_hcd
[    1.544829] usb usb1: SerialNumber: 0000:00:1a.0
[    1.546315] hub 1-0:1.0: USB hub found
[    1.546326] hub 1-0:1.0: 3 ports detected
[    1.547895] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.547905] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.548227] libata version 3.00 loaded.
[    1.548988] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[    1.548995] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.549192] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.549194] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.549196] usb usb2: Product: xHCI Host Controller
[    1.549198] usb usb2: Manufacturer: Linux 4.19.0-2-amd64 xhci-hcd
[    1.549200] usb usb2: SerialNumber: 0000:00:14.0
[    1.549418] hub 2-0:1.0: USB hub found
[    1.549433] hub 2-0:1.0: 4 ports detected
[    1.549632] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.549634] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.549640] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    1.549641] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.549646] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.549655] ehci-pci 0000:00:1d.0: debug port 2
[    1.549713] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.549716] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.549717] usb usb4: Product: xHCI Host Controller
[    1.549719] usb usb4: Manufacturer: Linux 4.19.0-2-amd64 xhci-hcd
[    1.549721] usb usb4: SerialNumber: 0000:00:14.0
[    1.549844] hub 4-0:1.0: USB hub found
[    1.549858] hub 4-0:1.0: 4 ports detected
[    1.553558] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.553591] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe061f000
[    1.557203] ahci 0000:00:1f.2: version 3.0
[    1.557411] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.567507] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[    1.567513] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.568340] scsi host0: ahci
[    1.568512] scsi host1: ahci
[    1.569458] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.569528] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.569531] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.569533] usb usb3: Product: EHCI Host Controller
[    1.569534] usb usb3: Manufacturer: Linux 4.19.0-2-amd64 ehci_hcd
[    1.569536] usb usb3: SerialNumber: 0000:00:1d.0
[    1.569758] hub 3-0:1.0: USB hub found
[    1.569771] hub 3-0:1.0: 3 ports detected
[    1.569837] scsi host2: ahci
[    1.573678] scsi host3: ahci
[    1.574041] scsi host4: ahci
[    1.574297] scsi host5: ahci
[    1.574382] ata1: SATA max UDMA/133 abar m2048@0xe061d000 port 0xe061d100 irq 29
[    1.574383] ata2: DUMMY
[    1.574387] ata3: SATA max UDMA/133 abar m2048@0xe061d000 port 0xe061d200 irq 29
[    1.574388] ata4: DUMMY
[    1.574388] ata5: DUMMY
[    1.574390] ata6: DUMMY
[    1.579891] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[    1.616886] [drm] Replacing VGA console driver
[    1.669095] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.669100] [drm] Driver supports precise vblank timestamp query.
[    1.669993] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.793364] random: fast init done
[    1.795827] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    1.795978] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.818188] acpi device:0d: registered as cooling_device5
[    1.818276] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.885006] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.887675] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.895175] ata1.00: ATA-9: TS240GMTS420S, Q1121A0, max UDMA/133
[    1.895177] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.904972] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.913123] ata1.00: configured for UDMA/133
[    1.924767] scsi 0:0:0:0: Direct-Access     ATA      TS240GMTS420S    1A0  PQ: 0 ANSI: 5
[    2.041392] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    2.041394] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.041650] hub 1-1:1.0: USB hub found
[    2.041740] hub 1-1:1.0: 6 ports detected
[    2.061162] tsc: Refined TSC clocksource calibration: 1795.920 MHz
[    2.061177] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31b7216c, max_idle_ns: 440795249889 ns
[    2.061290] clocksource: Switched to clocksource tsc
[    2.061539] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    2.061554] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.061988] hub 3-1:1.0: USB hub found
[    2.062138] hub 3-1:1.0: 8 ports detected
[    2.133258] fbcon: inteldrmfb (fb0) is primary device
[    2.240471] ata3: SATA link down (SStatus 0 SControl 300)
[    2.329077] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    2.330210] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4732]
[    2.361015] psmouse serio1: synaptics: queried min coordinates: x [1264..], y [1124..]
[    2.361028] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[    2.421007] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00/0x0, board id: 2182, fw id: 1164733
[    2.421027] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.439138] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[    2.439145] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.439149] usb 1-1.3: Product: Biometric Coprocessor
[    2.439152] usb 1-1.3: Manufacturer: Auth
[    2.459347] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.517083] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[    2.690129] usb 1-1.6: New USB device found, idVendor=5986, idProduct=0266, bcdDevice=14.12
[    2.690136] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.690140] usb 1-1.6: Product: Integrated Camera
[    2.690144] usb 1-1.6: Manufacturer: SunplusIT INC.
[    2.946423] Console: switching to colour frame buffer device 200x56
[    2.972525] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.000200] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    3.000210] sd 0:0:0:0: [sda] Write Protect is off
[    3.000213] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.000226] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.005730]  sda: sda1 sda2 sda3 sda4
[    3.006028] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.062706] device-mapper: uevent: version 1.0.3
[    3.062921] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    3.097008] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.428621] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input4
[    7.297311] random: crng init done
[    9.661229] NET: Registered protocol family 38
[    9.876968] raid6: sse2x1   gen()  8417 MB/s
[    9.944961] raid6: sse2x1   xor()  6078 MB/s
[   10.012964] raid6: sse2x2   gen() 10048 MB/s
[   10.080963] raid6: sse2x2   xor()  6760 MB/s
[   10.148959] raid6: sse2x4   gen() 11964 MB/s
[   10.216964] raid6: sse2x4   xor()  7948 MB/s
[   10.216965] raid6: using algorithm sse2x4 gen() 11964 MB/s
[   10.216965] raid6: .... xor() 7948 MB/s, rmw enabled
[   10.216966] raid6: using ssse3x2 recovery algorithm
[   10.224517] xor: automatically using best checksumming function   avx       
[   10.265034] Btrfs loaded, crc32c=crc32c-intel
[   10.310470] BTRFS: device label root devid 1 transid 1034 /dev/mapper/sda4_crypt
[   10.341416] BTRFS info (device dm-0): disk space caching is enabled
[   10.341419] BTRFS info (device dm-0): has skinny extents
[   10.390707] BTRFS info (device dm-0): enabling ssd optimizations
[   10.672159] systemd[1]: Inserted module 'autofs4'
[   10.686823] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   10.705382] systemd[1]: Detected architecture x86-64.
[   10.713191] systemd[1]: Set hostname to <debianLaptop>.
[   10.724097] systemd-fstab-generator[330]: Failed to create unit file /run/systemd/generator/-.mount, as it already exists. Duplicate entry in /etc/fstab?
[   10.820647] systemd[1]: Created slice User and Session Slice.
[   10.820723] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   10.821071] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   10.821090] systemd[1]: Reached target Remote File Systems.
[   10.821132] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.821244] systemd[1]: Listening on udev Control Socket.
[   10.821255] systemd[1]: Reached target Swap.
[   10.851600] BTRFS info (device dm-0): turning on discard
[   10.851604] BTRFS info (device dm-0): disk space caching is enabled
[   10.852692] BTRFS info (device dm-0): disk space caching is enabled
[   10.862158] lp: driver loaded but no devices found
[   10.866231] ppdev: user-space parallel port driver
[   10.972249] systemd-journald[349]: Received request to flush runtime journal from PID 1
[   11.041953] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input5
[   11.042095] ACPI: Sleep Button [SLPB]
[   11.042188] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input6
[   11.042567] ACPI: Lid Switch [LID]
[   11.042641] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[   11.042655] ACPI: Power Button [PWRF]
[   11.078938] battery: ACPI: Battery Slot [BAT0] (battery present)
[   11.079073] battery: ACPI: Battery Slot [BAT1] (battery absent)
[   11.092520] ACPI: AC Adapter [AC] (off-line)
[   11.093102] iTCO_vendor_support: vendor-support=0
[   11.125870] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   11.126336] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.126387] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[   11.127913] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.139205] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   11.139207] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   11.139208] RAPL PMU: hw unit of domain package 2^-16 Joules
[   11.139209] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   11.140533] Non-volatile memory driver v1.3
[   11.140776] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.161618] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[   11.174489] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[   11.174490] thinkpad_acpi: http://ibm-acpi.sf.net/
[   11.174491] thinkpad_acpi: ThinkPad BIOS CBET4000 4.9-727-g358cbb3a30, EC G6HT24WW-3.22
[   11.174492] thinkpad_acpi: Lenovo ThinkPad X1 Carbon, model 346034U
[   11.175161] thinkpad_acpi: radio switch found; radios are enabled
[   11.175246] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[   11.175266] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   11.175266] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   11.237412] media: Linux media interface: v0.10
[   11.269746] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   11.270108] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   11.271603] thinkpad_acpi: battery 1 registered (start 0, stop 0)
[   11.271609] battery: new extension: ThinkPad Battery Extension
[   11.271677] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[   11.272252] Intel(R) Wireless WiFi driver for Linux
[   11.272253] Copyright(c) 2003- 2015 Intel Corporation
[   11.273834] videodev: Linux video capture interface: v2.00
[   11.290027] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[   11.290159] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   11.290276] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   11.334980] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0266)
[   11.341160] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   11.341163] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.341165] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   11.341167] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.341168] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.341171] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   11.341173] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   11.365062] intel_rapl: Found RAPL domain package
[   11.365065] intel_rapl: Found RAPL domain core
[   11.365066] intel_rapl: Found RAPL domain uncore
[   11.372508] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[   11.372512] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[   11.372514] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[   11.372516] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[   11.372821] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input13
[   11.372918] usbcore: registered new interface driver uvcvideo
[   11.372919] USB Video Class driver (1.1.1)
[   11.380811] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   11.382336] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   11.382421] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.382492] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   11.416043] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   11.416045] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   11.416047] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   11.416050] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205S AGN, REV=0xB0
[   11.460857] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   11.464440] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[   11.643557] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   11.675954] audit: type=1400 audit(1550405903.846:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=503 comm="apparmor_parser"
[   11.675959] audit: type=1400 audit(1550405903.846:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=503 comm="apparmor_parser"
[   11.675962] audit: type=1400 audit(1550405903.846:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=503 comm="apparmor_parser"
[   11.677312] audit: type=1400 audit(1550405903.850:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=505 comm="apparmor_parser"
[   11.679382] audit: type=1400 audit(1550405903.850:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=507 comm="apparmor_parser"
[   11.679569] audit: type=1400 audit(1550405903.850:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=504 comm="apparmor_parser"
[   11.679573] audit: type=1400 audit(1550405903.850:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=504 comm="apparmor_parser"
[   11.679577] audit: type=1400 audit(1550405903.850:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=504 comm="apparmor_parser"
[   11.679905] audit: type=1400 audit(1550405903.850:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=508 comm="apparmor_parser"
[   11.681731] audit: type=1400 audit(1550405903.854:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=510 comm="apparmor_parser"
[   12.235090] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.247872] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   12.555112] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   12.637707] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   12.664286] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   12.962805] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   13.056376] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   13.133083] mei_me 0000:00:16.0: wait hw ready failed
[   13.133091] mei_me 0000:00:16.0: hw_start failed ret = -62
[   13.133123] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[   13.153675] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   15.149007] mei_me 0000:00:16.0: wait hw ready failed
[   15.149014] mei_me 0000:00:16.0: hw_start failed ret = -62
[   15.149034] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[   16.374625] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   16.675265] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   16.759546] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   17.164985] mei_me 0000:00:16.0: wait hw ready failed
[   17.164993] mei_me 0000:00:16.0: hw_start failed ret = -62
[   17.165001] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[   17.165003] mei_me 0000:00:16.0: reset failed ret = -19
[   17.165006] mei_me 0000:00:16.0: link layer initialization failed.
[   17.165009] mei_me 0000:00:16.0: init hw failure.
[   17.165069] mei_me 0000:00:16.0: initialization failed.
[   19.908389] wlp2s0: authenticate with 44:e9:dd:fd:25:50
[   19.910683] wlp2s0: send auth to 44:e9:dd:fd:25:50 (try 1/3)
[   19.913895] wlp2s0: authenticated
[   19.916986] wlp2s0: associate with 44:e9:dd:fd:25:50 (try 1/3)
[   19.921033] wlp2s0: RX AssocResp from 44:e9:dd:fd:25:50 (capab=0x431 status=0 aid=2)
[   19.938401] wlp2s0: associated
[   20.051679] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   21.967749] fuse init (API version 7.27)
[   23.649040] rfkill: input handler disabled
[  392.316135] BTRFS warning (device dm-0): block group 34381758464 has wrong amount of free space
[  392.316137] BTRFS warning (device dm-0): failed to load free space cache for block group 34381758464, rebuilding it now