| [ 0.000000] Linux version 4.18.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-30)) #1 SMP Debian 4.18.10-2 (2018-11-02) |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-amd64 root=UUID=749a2872-dfdf-4601-a982-fedcd6f615c4 ro quiet |
| [ 0.000000] x86/fpu: x87 FPU will use FXSAVE |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf304fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bf305000-0x00000000bfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: Getac P470/P470, BIOS 4.8-2204-ge0e98eb11d 11/17/2018 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] last_pfn = 0xbf305 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000 mask F80000000 write-back |
| [ 0.000000] 1 base 080000000 mask FC0000000 write-back |
| [ 0.000000] 2 base 0BF400000 mask FFFC00000 uncachable |
| [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable |
| [ 0.000000] 4 base 0D0000000 mask FF0000000 write-combining |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.000000] found SMP MP-table at [mem 0x000f60a0-0x000f60af] mapped at [(____ptrval____)] |
| [ 0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576 |
| [ 0.000000] BRK [0x5d44b000, 0x5d44bfff] PGTABLE |
| [ 0.000000] BRK [0x5d44c000, 0x5d44cfff] PGTABLE |
| [ 0.000000] BRK [0x5d44d000, 0x5d44dfff] PGTABLE |
| [ 0.000000] BRK [0x5d44e000, 0x5d44efff] PGTABLE |
| [ 0.000000] BRK [0x5d44f000, 0x5d44ffff] PGTABLE |
| [ 0.000000] BRK [0x5d450000, 0x5d450fff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x32a3d000-0x35515fff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F6250 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BF3060E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BF30A010 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BF306280 003D81 (v02 COREv4 COREBOOT 20090419 INTL 20180810) |
| [ 0.000000] ACPI: FACS 0x00000000BF306240 000040 |
| [ 0.000000] ACPI: FACS 0x00000000BF306240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BF30A110 000758 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 0x00000000BF30A870 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BF30A8B0 000068 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: ECDT 0x00000000BF30A920 000054 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BF30C980 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bf304fff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0xbf300000-0xbf304fff] |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000bf304fff] |
| [ 0.000000] Normal empty |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf304fff] |
| [ 0.000000] Reserved but unavailable: 3421 pages |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf304fff] |
| [ 0.000000] On node 0 totalpages: 783011 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 12173 pages used for memmap |
| [ 0.000000] DMA32 zone: 779013 pages, LIFO batch:31 |
| [ 0.000000] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff] |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] [mem 0xc0000000-0xefffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x52e with crng_init=0 |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u1048576 |
| [ 0.000000] pcpu-alloc: s142744 r8192 d29288 u1048576 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 770753 |
| [ 0.000000] Policy zone: DMA32 |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-amd64 root=UUID=749a2872-dfdf-4601-a982-fedcd6f615c4 ro quiet |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 3015616K/3132044K available (10252K kernel code, 1223K rwdata, 3260K rodata, 1548K init, 656K bss, 116428K reserved, 0K cma-reserved) |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| [ 0.000000] Kernel/User page tables isolation: enabled |
| [ 0.000000] ftrace: allocating 31267 entries in 123 pages |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 |
| [ 0.000000] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16 |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] ACPI: Core revision 20180531 |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] APIC: Switch to symmetric I/O mode setup |
| [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.020000] tsc: Fast TSC calibration using PIT |
| [ 0.024000] tsc: Detected 1995.168 MHz processor |
| [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3984b3ac44f, max_idle_ns: 881590752339 ns |
| [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.33 BogoMIPS (lpj=7980672) |
| [ 0.024000] pid_max: default: 32768 minimum: 301 |
| [ 0.024000] Security Framework initialized |
| [ 0.024000] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.024000] AppArmor: AppArmor initialized |
| [ 0.028340] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.030280] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.030387] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.030450] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.030874] mce: CPU supports 6 MCE banks |
| [ 0.030886] CPU0: Thermal monitoring enabled (TM2) |
| [ 0.030889] process: using mwait in idle threads |
| [ 0.030896] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 |
| [ 0.030897] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 |
| [ 0.030900] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.030901] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.030902] Speculative Store Bypass: Vulnerable |
| [ 0.031065] Freeing SMP alternatives memory: 24K |
| [ 0.036000] smpboot: CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0x6) |
| [ 0.036000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. |
| [ 0.036000] core: PEBS disabled due to CPU errata |
| [ 0.036000] ... version: 2 |
| [ 0.036000] ... bit width: 40 |
| [ 0.036000] ... generic registers: 2 |
| [ 0.036000] ... value mask: 000000ffffffffff |
| [ 0.036000] ... max period: 000000007fffffff |
| [ 0.036000] ... fixed-purpose events: 3 |
| [ 0.036000] ... event mask: 0000000700000003 |
| [ 0.036000] Hierarchical SRCU implementation. |
| [ 0.036000] smp: Bringing up secondary CPUs ... |
| [ 0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.036000] x86: Booting SMP configuration: |
| [ 0.036000] .... node #0, CPUs: #1 |
| [ 0.036121] smp: Brought up 1 node, 2 CPUs |
| [ 0.036121] smpboot: Max logical packages: 1 |
| [ 0.036121] smpboot: Total of 2 processors activated (7980.67 BogoMIPS) |
| [ 0.038283] devtmpfs: initialized |
| [ 0.038283] x86/mm: Memory block size: 128MB |
| [ 0.040095] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.040103] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 0.040178] pinctrl core: initialized pinctrl subsystem |
| [ 0.040444] NET: Registered protocol family 16 |
| [ 0.040573] audit: initializing netlink subsys (disabled) |
| [ 0.040587] audit: type=2000 audit(1542469472.040:1): state=initialized audit_enabled=0 res=1 |
| [ 0.040587] cpuidle: using governor ladder |
| [ 0.040587] cpuidle: using governor menu |
| [ 0.040587] ACPI: bus type PCI registered |
| [ 0.040587] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.040587] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.040587] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.040587] PCI: Using configuration type 1 for base access |
| [ 0.041283] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.041283] ACPI: Added _OSI(Module Device) |
| [ 0.041283] ACPI: Added _OSI(Processor Device) |
| [ 0.041283] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.041283] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.041283] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.041283] ACPI: EC: EC started |
| [ 0.041283] ACPI: EC: interrupt blocked |
| [ 0.041283] ACPI: \: Used as first EC |
| [ 0.041283] ACPI: \: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.041283] ACPI: \: Used as boot ECDT EC to handle transactions |
| [ 0.044947] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.045742] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored |
| [ 0.048700] ACPI: Interpreter enabled |
| [ 0.048728] ACPI: (supports S0 S3 S4 S5) |
| [ 0.048731] ACPI: Using IOAPIC for interrupt routing |
| [ 0.048780] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.049018] ACPI: Enabled 12 GPEs in block 00 to 1F |
| [ 0.308263] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.308269] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.308327] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.308338] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.308400] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff]) |
| [ 0.308643] PCI host bridge to bus 0000:00 |
| [ 0.308646] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.308648] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.308650] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.308652] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.308654] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.308657] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.308659] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.308661] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.308663] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.308665] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.308667] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.308669] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.308671] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.308673] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.308675] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.308677] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] |
| [ 0.308679] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.308682] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.308694] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000 |
| [ 0.308841] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000 |
| [ 0.308855] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff] |
| [ 0.308861] pci 0000:00:02.0: reg 0x14: [io 0x4090-0x4097] |
| [ 0.308867] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref] |
| [ 0.308874] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff] |
| [ 0.309003] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000 |
| [ 0.309015] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff] |
| [ 0.309205] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 |
| [ 0.309237] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit] |
| [ 0.309348] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.309487] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 |
| [ 0.309601] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.309740] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 |
| [ 0.309859] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.309998] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400 |
| [ 0.310109] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.310246] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400 |
| [ 0.310365] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| [ 0.310506] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 |
| [ 0.310567] pci 0000:00:1d.0: reg 0x20: [io 0x4000-0x401f] |
| [ 0.310706] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 |
| [ 0.310766] pci 0000:00:1d.1: reg 0x20: [io 0x4020-0x403f] |
| [ 0.310902] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 |
| [ 0.310961] pci 0000:00:1d.2: reg 0x20: [io 0x4040-0x405f] |
| [ 0.311099] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 |
| [ 0.311159] pci 0000:00:1d.3: reg 0x20: [io 0x4060-0x407f] |
| [ 0.311305] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 |
| [ 0.311333] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff] |
| [ 0.311435] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold |
| [ 0.311555] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 |
| [ 0.311739] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100 |
| [ 0.311859] pci 0000:00:1f.0: quirk: [io 0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO |
| [ 0.311865] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO |
| [ 0.311869] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 02e0 (mask 001f) |
| [ 0.311873] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 00ff) |
| [ 0.311878] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007) |
| [ 0.312029] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180 |
| [ 0.312055] pci 0000:00:1f.2: reg 0x10: [io 0x4098-0x409f] |
| [ 0.312066] pci 0000:00:1f.2: reg 0x14: [io 0x40a8-0x40ab] |
| [ 0.312078] pci 0000:00:1f.2: reg 0x18: [io 0x40a0-0x40a7] |
| [ 0.312089] pci 0000:00:1f.2: reg 0x1c: [io 0x40ac-0x40af] |
| [ 0.312101] pci 0000:00:1f.2: reg 0x20: [io 0x4080-0x408f] |
| [ 0.312126] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.312128] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.312130] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.312132] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.312166] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.312281] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 |
| [ 0.312360] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.312561] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.312689] pci 0000:02:00.0: [8086:4222] type 00 class 0x028000 |
| [ 0.312787] pci 0000:02:00.0: reg 0x10: [mem 0xe4100000-0xe4100fff] |
| [ 0.313236] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.313423] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.313451] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.313459] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff] |
| [ 0.313530] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.313630] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.313674] pci 0000:04:00.0: reg 0x10: [io 0x3000-0x30ff] |
| [ 0.313716] pci 0000:04:00.0: reg 0x18: [mem 0xe4220000-0xe4220fff 64bit] |
| [ 0.313764] pci 0000:04:00.0: reg 0x30: [mem 0xe4200000-0xe421ffff pref] |
| [ 0.313779] pci 0000:04:00.0: enabling Extended Tags |
| [ 0.313903] pci 0000:04:00.0: supports D1 D2 |
| [ 0.313905] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold |
| [ 0.314024] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.314036] pci 0000:00:1c.3: PCI bridge to [bus 04] |
| [ 0.314041] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] |
| [ 0.314046] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff] |
| [ 0.314078] pci_bus 0000:05: extended config space not accessible |
| [ 0.314183] pci 0000:05:05.0: [104c:8039] type 02 class 0x060700 |
| [ 0.314210] pci 0000:05:05.0: reg 0x10: [mem 0xe2004000-0xe2004fff] |
| [ 0.314255] pci 0000:05:05.0: supports D1 D2 |
| [ 0.314257] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.314359] pci 0000:05:05.1: [104c:803a] type 00 class 0x0c0010 |
| [ 0.314385] pci 0000:05:05.1: reg 0x10: [mem 0xe2008000-0xe20087ff] |
| [ 0.314399] pci 0000:05:05.1: reg 0x14: [mem 0xe0000000-0xe0003fff] |
| [ 0.314505] pci 0000:05:05.1: supports D1 D2 |
| [ 0.314507] pci 0000:05:05.1: PME# supported from D0 D1 D2 D3hot |
| [ 0.314593] pci 0000:05:05.2: [104c:803b] type 00 class 0x018000 |
| [ 0.314618] pci 0000:05:05.2: reg 0x10: [mem 0xe2005000-0xe2005fff] |
| [ 0.314732] pci 0000:05:05.2: supports D1 D2 |
| [ 0.314734] pci 0000:05:05.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.314820] pci 0000:05:05.3: [104c:803c] type 00 class 0x080501 |
| [ 0.314845] pci 0000:05:05.3: reg 0x10: [mem 0xe2009000-0xe20090ff] |
| [ 0.314960] pci 0000:05:05.3: supports D1 D2 |
| [ 0.314962] pci 0000:05:05.3: PME# supported from D0 D1 D2 D3hot |
| [ 0.315048] pci 0000:05:05.4: [104c:803d] type 00 class 0x078000 |
| [ 0.315073] pci 0000:05:05.4: reg 0x10: [mem 0xe2006000-0xe2006fff] |
| [ 0.315087] pci 0000:05:05.4: reg 0x14: [mem 0xe2007000-0xe2007fff] |
| [ 0.315189] pci 0000:05:05.4: supports D1 D2 |
| [ 0.315191] pci 0000:05:05.4: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.315320] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode) |
| [ 0.315325] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff] |
| [ 0.315330] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff] |
| [ 0.315338] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref] |
| [ 0.315340] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.315343] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.315345] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) |
| [ 0.315347] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode) |
| [ 0.315349] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode) |
| [ 0.315351] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode) |
| [ 0.315354] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) |
| [ 0.315356] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) |
| [ 0.315358] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) |
| [ 0.315360] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) |
| [ 0.315362] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) |
| [ 0.315364] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) |
| [ 0.315366] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode) |
| [ 0.315369] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode) |
| [ 0.315371] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode) |
| [ 0.315373] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode) |
| [ 0.315375] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) |
| [ 0.315412] pci_bus 0000:06: extended config space not accessible |
| [ 0.315438] pci_bus 0000:06: busn_res: [bus 06] end can not be updated to 09 |
| [ 0.315444] pci 0000:00:1e.0: bridge has subordinate 06 but max busn 09 |
| [ 0.315607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15) |
| [ 0.315678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 11 12 14 15) *10 |
| [ 0.315747] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12 14 15) |
| [ 0.315815] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 11 12 14 15) *10 |
| [ 0.315884] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled. |
| [ 0.315952] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled. |
| [ 0.316027] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12 14 15) |
| [ 0.316096] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *10 |
| [ 0.317094] ACPI: EC: interrupt unblocked |
| [ 0.317120] ACPI: EC: event unblocked |
| [ 0.317132] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.317134] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events |
| [ 0.317243] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.317243] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.317243] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.317243] vgaarb: loaded |
| [ 0.317243] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.317243] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.317243] PTP clock support registered |
| [ 0.317243] EDAC MC: Ver: 3.0.0 |
| [ 0.317243] PCI: Using ACPI for IRQ routing |
| [ 0.318498] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.318593] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.318595] e820: reserve RAM buffer [mem 0xbf305000-0xbfffffff] |
| [ 0.320104] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 0.320112] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.320118] hpet0: 3 comparators, 64-bit 14.318180 MHz counter |
| [ 0.322132] clocksource: Switched to clocksource tsc-early |
| [ 0.339785] VFS: Disk quotas dquot_6.6.0 |
| [ 0.339814] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.340033] AppArmor: AppArmor Filesystem Enabled |
| [ 0.340066] pnp: PnP ACPI init |
| [ 0.594178] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.594181] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved |
| [ 0.594184] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.594186] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.594189] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.594191] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.594194] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.594196] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.594205] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.594527] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.594534] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.594613] system 00:02: [io 0x0800-0x080f] has been reserved |
| [ 0.594616] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.594618] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.594625] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.594667] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.595065] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 0.595214] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (disabled) |
| [ 0.595589] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 0.595959] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 0.596006] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.596048] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.596084] pnp: PnP ACPI: found 10 devices |
| [ 0.603232] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.603256] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 |
| [ 0.603260] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 |
| [ 0.603263] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 |
| [ 0.603319] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff] |
| [ 0.603331] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] |
| [ 0.603335] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff] |
| [ 0.603339] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.603343] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] |
| [ 0.603349] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] |
| [ 0.603354] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] |
| [ 0.603362] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.603368] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff] |
| [ 0.603379] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.603394] pci 0000:00:1c.3: PCI bridge to [bus 04] |
| [ 0.603397] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] |
| [ 0.603404] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff] |
| [ 0.603423] pci 0000:05:05.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref] |
| [ 0.603429] pci 0000:05:05.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff] |
| [ 0.603432] pci 0000:05:05.0: BAR 13: assigned [io 0x1000-0x10ff] |
| [ 0.603434] pci 0000:05:05.0: BAR 14: assigned [io 0x1400-0x14ff] |
| [ 0.603437] pci 0000:05:05.0: CardBus bridge to [bus 06] |
| [ 0.603439] pci 0000:05:05.0: bridge window [io 0x1000-0x10ff] |
| [ 0.603445] pci 0000:05:05.0: bridge window [io 0x1400-0x14ff] |
| [ 0.603450] pci 0000:05:05.0: bridge window [mem 0xc4000000-0xc7ffffff pref] |
| [ 0.603455] pci 0000:05:05.0: bridge window [mem 0xc8000000-0xcbffffff] |
| [ 0.603462] pci 0000:00:1e.0: PCI bridge to [bus 05-06] |
| [ 0.603465] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff] |
| [ 0.603471] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe20fffff] |
| [ 0.603476] pci 0000:00:1e.0: bridge window [mem 0xe2100000-0xe40fffff 64bit pref] |
| [ 0.603484] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.603486] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.603488] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.603491] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.603493] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.603495] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.603497] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.603499] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.603501] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.603503] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.603505] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.603507] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.603509] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.603511] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.603513] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.603516] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xfebfffff window] |
| [ 0.603518] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.603520] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] |
| [ 0.603522] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc01fffff] |
| [ 0.603524] pci_bus 0000:01: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] |
| [ 0.603526] pci_bus 0000:02: resource 1 [mem 0xe4100000-0xe41fffff] |
| [ 0.603529] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] |
| [ 0.603531] pci_bus 0000:04: resource 1 [mem 0xe4200000-0xe42fffff] |
| [ 0.603533] pci_bus 0000:05: resource 0 [io 0x1000-0x2fff] |
| [ 0.603535] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff] |
| [ 0.603537] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref] |
| [ 0.603539] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.603541] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] |
| [ 0.603543] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.603545] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.603547] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.603549] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.603552] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.603554] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.603556] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.603558] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.603560] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.603562] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.603564] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.603566] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.603568] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.603570] pci_bus 0000:05: resource 19 [mem 0xc0000000-0xfebfffff window] |
| [ 0.603572] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.603574] pci_bus 0000:06: resource 0 [io 0x1000-0x10ff] |
| [ 0.603576] pci_bus 0000:06: resource 1 [io 0x1400-0x14ff] |
| [ 0.603578] pci_bus 0000:06: resource 2 [mem 0xc4000000-0xc7ffffff pref] |
| [ 0.603580] pci_bus 0000:06: resource 3 [mem 0xc8000000-0xcbffffff] |
| [ 0.603691] NET: Registered protocol family 2 |
| [ 0.603933] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) |
| [ 0.603969] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.604139] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| [ 0.604424] TCP: Hash tables configured (established 32768 bind 32768) |
| [ 0.604504] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.604545] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.604633] NET: Registered protocol family 1 |
| [ 0.604656] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.605665] PCI: CLS 64 bytes, default 64 |
| [ 0.605727] Unpacking initramfs... |
| [ 1.595243] Freeing initrd memory: 43876K |
| [ 1.596581] Initialise system trusted keyrings |
| [ 1.596692] workingset: timestamp_bits=40 max_order=20 bucket_order=0 |
| [ 1.599179] zbud: loaded |
| [ 1.599529] pstore: using deflate compression |
| [ 2.163802] Key type asymmetric registered |
| [ 2.163804] Asymmetric key parser 'x509' registered |
| [ 2.163874] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) |
| [ 2.163927] io scheduler noop registered |
| [ 2.163929] io scheduler deadline registered |
| [ 2.163997] io scheduler cfq registered (default) |
| [ 2.163998] io scheduler mq-deadline registered |
| [ 2.164198] pcieport 0000:00:1c.0: enabling device (0104 -> 0107) |
| [ 2.165211] pcieport 0000:00:1c.0: Signaling PME with IRQ 24 |
| [ 2.165242] pcieport 0000:00:1c.1: Signaling PME with IRQ 25 |
| [ 2.165273] pcieport 0000:00:1c.2: Signaling PME with IRQ 26 |
| [ 2.165310] pcieport 0000:00:1c.3: Signaling PME with IRQ 27 |
| [ 2.165343] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum) |
| [ 2.165402] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 2.165423] intel_idle: does not run on family 6 model 15 |
| [ 2.166504] Monitor-Mwait will be used to enter C-1 state |
| [ 2.166512] tsc: Marking TSC unstable due to TSC halts in idle |
| [ 2.166745] clocksource: Switched to clocksource hpet |
| [ 2.167037] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 2.187738] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 2.187881] serial 00:05: [io 0x02f8-0x02ff] |
| [ 2.187961] serial 00:05: [irq 3] |
| [ 2.188713] serial 00:05: activated |
| [ 2.209360] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 2.230134] 00:06: ttyS2 at I/O 0x3e8 (irq = 5, base_baud = 115200) is a 16550A |
| [ 2.250904] 00:07: ttyS3 at I/O 0x2e8 (irq = 5, base_baud = 115200) is a 16550A |
| [ 2.251341] Linux agpgart interface v0.103 |
| [ 2.251482] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 2.251483] AMD IOMMUv2 functionality not available on this system |
| [ 2.251774] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 2.254290] i8042: Detected active multiplexing controller, rev 1.1 |
| [ 2.255508] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.255514] serio: i8042 AUX0 port at 0x60,0x64 irq 12 |
| [ 2.255560] serio: i8042 AUX1 port at 0x60,0x64 irq 12 |
| [ 2.255597] serio: i8042 AUX2 port at 0x60,0x64 irq 12 |
| [ 2.255636] serio: i8042 AUX3 port at 0x60,0x64 irq 12 |
| [ 2.255839] mousedev: PS/2 mouse device common for all mice |
| [ 2.255900] rtc_cmos 00:03: RTC can wake from S4 |
| [ 2.256133] rtc_cmos 00:03: registered as rtc0 |
| [ 2.256159] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs |
| [ 2.256206] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.256632] NET: Registered protocol family 10 |
| [ 2.262805] Segment Routing with IPv6 |
| [ 2.262836] mip6: Mobile IPv6 |
| [ 2.262840] NET: Registered protocol family 17 |
| [ 2.262847] mpls_gso: MPLS GSO support |
| [ 2.263081] microcode: sig=0x6f6, pf=0x20, revision=0xd1 |
| [ 2.263165] microcode: Microcode Update Driver: v2.2. |
| [ 2.263417] registered taskstats version 1 |
| [ 2.263418] Loading compiled-in X.509 certificates |
| [ 2.280630] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 2.337137] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' |
| [ 2.337165] zswap: loaded using pool lzo/zbud |
| [ 2.337369] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 2.337916] rtc_cmos 00:03: setting system clock to 2018-11-17 15:44:35 UTC (1542469475) |
| [ 2.337948] Unstable clock detected, switching default tracing clock to "global" |
| If you want to keep using the local clock, then add: |
| "trace_clock=local" |
| on the kernel command line |
| [ 2.341457] Freeing unused kernel image memory: 1548K |
| [ 2.352110] Write protecting the kernel read-only data: 16384k |
| [ 2.353452] Freeing unused kernel image memory: 2028K |
| [ 2.354011] Freeing unused kernel image memory: 836K |
| [ 2.366700] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 2.366702] x86/mm: Checking user space page tables |
| [ 2.379265] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 2.486225] input: Lid Switch as /devices/LNXSYSTM:00/PNP0C0D:00/input/input4 |
| [ 2.486241] ACPI: Lid Switch [LID0] |
| [ 2.491846] input: Sleep Button as /devices/LNXSYSTM:00/PNP0C0E:00/input/input5 |
| [ 2.491865] ACPI: Sleep Button [SLPB] |
| [ 2.492639] input: Power Button as /devices/LNXSYSTM:00/PNP0C0C:00/input/input6 |
| [ 2.492662] ACPI: Power Button [PWRB] |
| [ 2.492731] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 |
| [ 2.492745] ACPI: Power Button [PWRF] |
| [ 2.524209] ACPI: bus type USB registered |
| [ 2.524257] usbcore: registered new interface driver usbfs |
| [ 2.524281] usbcore: registered new interface driver hub |
| [ 2.526120] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| [ 2.526696] r8169 0000:04:00.0 eth0: RTL8168b/8111b, 00:40:d0:e4:58:4b, XID 38000000, IRQ 28 |
| [ 2.526698] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] |
| [ 2.526747] usbcore: registered new device driver usb |
| [ 2.529470] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.529957] ehci-pci: EHCI PCI platform driver |
| [ 2.530167] ehci-pci 0000:00:1d.7: EHCI Host Controller |
| [ 2.530179] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 |
| [ 2.530196] ehci-pci 0000:00:1d.7: debug port 1 |
| [ 2.530474] uhci_hcd: USB Universal Host Controller Interface driver |
| [ 2.534124] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported |
| [ 2.534587] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe4444000 |
| [ 2.539110] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 2.539281] ACPI: Invalid active0 threshold |
| [ 2.539966] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 2.539967] ACPI: Thermal Zone [THRM] (53 C) |
| [ 2.540746] sdhci: Secure Digital Host Controller Interface driver |
| [ 2.540747] sdhci: Copyright(c) Pierre Ossman |
| [ 2.542783] sdhci-pci 0000:05:05.3: SDHCI controller found [104c:803c] (rev 0) |
| [ 2.542902] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 2.548090] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 |
| [ 2.548195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 |
| [ 2.548198] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.548201] usb usb1: Product: EHCI Host Controller |
| [ 2.548203] usb usb1: Manufacturer: Linux 4.18.0-2-amd64 ehci_hcd |
| [ 2.548205] usb usb1: SerialNumber: 0000:00:1d.7 |
| [ 2.548417] hub 1-0:1.0: USB hub found |
| [ 2.548429] hub 1-0:1.0: 8 ports detected |
| [ 2.549052] uhci_hcd 0000:00:1d.0: UHCI Host Controller |
| [ 2.549064] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 2.549074] uhci_hcd 0000:00:1d.0: detected 2 ports |
| [ 2.549102] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004000 |
| [ 2.549186] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 |
| [ 2.549189] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.549191] usb usb2: Product: UHCI Host Controller |
| [ 2.549193] usb usb2: Manufacturer: Linux 4.18.0-2-amd64 uhci_hcd |
| [ 2.549195] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 2.549357] hub 2-0:1.0: USB hub found |
| [ 2.549368] hub 2-0:1.0: 2 ports detected |
| [ 2.549677] uhci_hcd 0000:00:1d.1: UHCI Host Controller |
| [ 2.549687] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 |
| [ 2.549696] uhci_hcd 0000:00:1d.1: detected 2 ports |
| [ 2.549725] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004020 |
| [ 2.549805] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 |
| [ 2.549807] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.549810] usb usb3: Product: UHCI Host Controller |
| [ 2.549812] usb usb3: Manufacturer: Linux 4.18.0-2-amd64 uhci_hcd |
| [ 2.549814] usb usb3: SerialNumber: 0000:00:1d.1 |
| [ 2.549954] hub 3-0:1.0: USB hub found |
| [ 2.549972] hub 3-0:1.0: 2 ports detected |
| [ 2.550101] mmc0: SDHCI controller on PCI [0000:05:05.3] using DMA |
| [ 2.550248] uhci_hcd 0000:00:1d.2: UHCI Host Controller |
| [ 2.550255] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 |
| [ 2.550265] uhci_hcd 0000:00:1d.2: detected 2 ports |
| [ 2.550298] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 |
| [ 2.550375] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 |
| [ 2.550378] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.550380] usb usb4: Product: UHCI Host Controller |
| [ 2.550382] usb usb4: Manufacturer: Linux 4.18.0-2-amd64 uhci_hcd |
| [ 2.550384] usb usb4: SerialNumber: 0000:00:1d.2 |
| [ 2.550533] hub 4-0:1.0: USB hub found |
| [ 2.550543] hub 4-0:1.0: 2 ports detected |
| [ 2.550793] uhci_hcd 0000:00:1d.3: UHCI Host Controller |
| [ 2.550800] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 |
| [ 2.550809] uhci_hcd 0000:00:1d.3: detected 2 ports |
| [ 2.550836] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004060 |
| [ 2.550912] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 |
| [ 2.550914] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.550916] usb usb5: Product: UHCI Host Controller |
| [ 2.550918] usb usb5: Manufacturer: Linux 4.18.0-2-amd64 uhci_hcd |
| [ 2.550920] usb usb5: SerialNumber: 0000:00:1d.3 |
| [ 2.551061] hub 5-0:1.0: USB hub found |
| [ 2.551071] hub 5-0:1.0: 2 ports detected |
| [ 2.552133] SCSI subsystem initialized |
| [ 2.560736] libata version 3.00 loaded. |
| [ 2.562374] ata_piix 0000:00:1f.2: version 2.13 |
| [ 2.562538] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] |
| [ 2.564945] scsi host0: ata_piix |
| [ 2.597504] pci 0000:00:00.0: Intel 945GM Chipset |
| [ 2.597517] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable |
| [ 2.598528] pci 0000:00:00.0: detected 8192K stolen memory |
| [ 2.598569] [drm] Replacing VGA console driver |
| [ 2.599316] Console: switching to colour dummy device 80x25 |
| [ 2.599815] scsi host1: ata_piix |
| [ 2.599912] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4080 irq 14 |
| [ 2.599914] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4088 irq 15 |
| [ 2.650661] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 2.650663] [drm] Driver supports precise vblank timestamp query. |
| [ 2.651002] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 2.652124] firewire_ohci 0000:05:05.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 |
| [ 2.660682] random: fast init done |
| [ 2.665113] [drm] RC6 disabled, disabling runtime PM support |
| [ 2.665175] [drm] initialized overlay support |
| [ 2.666080] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0 |
| [ 2.666279] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 2.666625] acpi device:03: registered as cooling_device2 |
| [ 2.666706] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13 |
| [ 2.684365] fbcon: inteldrmfb (fb0) is primary device |
| [ 2.734321] Console: switching to colour frame buffer device 160x50 |
| [ 2.758897] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 2.763042] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.60, max UDMA/33 |
| [ 2.763198] ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100 |
| [ 2.763200] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) |
| [ 2.768616] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0012 PQ: 0 ANSI: 5 |
| [ 2.770909] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.60 PQ: 0 ANSI: 5 |
| [ 2.805526] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) |
| [ 2.805539] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.805542] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.805558] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.833893] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray |
| [ 2.833898] cdrom: Uniform CD-ROM driver Revision: 3.20 |
| [ 2.834245] sr 1:0:0:0: Attached scsi CD-ROM sr0 |
| [ 2.888060] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.913809] sda: sda1 sda2 < sda5 > |
| [ 2.914329] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.045779] usb 1-1: New USB device found, idVendor=0525, idProduct=127a, bcdDevice= 1.01 |
| [ 3.045782] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 3.045785] usb 1-1: Product: Ajays USB 2.0 Debug Cable |
| [ 3.045787] usb 1-1: Manufacturer: Ajays Technology |
| [ 3.045789] usb 1-1: SerialNumber: Ajays002 |
| [ 3.168159] firewire_core 0000:05:05.1: created device fw0: GUID 0040d00100437d35, S400 |
| [ 3.322314] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000/0x0/0x0, board id: 0, fw id: 50149 |
| [ 3.359217] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12 |
| [ 3.480017] raid6: sse2x1 gen() 2873 MB/s |
| [ 3.548012] raid6: sse2x1 xor() 3376 MB/s |
| [ 3.584036] usb 4-1: new full-speed USB device number 2 using uhci_hcd |
| [ 3.616016] raid6: sse2x2 gen() 3850 MB/s |
| [ 3.684011] raid6: sse2x2 xor() 3995 MB/s |
| [ 3.752018] raid6: sse2x4 gen() 6125 MB/s |
| [ 3.789107] usb 4-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=19.58 |
| [ 3.789110] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.820016] raid6: sse2x4 xor() 4270 MB/s |
| [ 3.820018] raid6: using algorithm sse2x4 gen() 6125 MB/s |
| [ 3.820019] raid6: .... xor() 4270 MB/s, rmw enabled |
| [ 3.820021] raid6: using ssse3x2 recovery algorithm |
| [ 3.824374] xor: measuring software checksum speed |
| [ 3.864011] prefetch64-sse: 7656.000 MB/sec |
| [ 3.904010] generic_sse: 6806.000 MB/sec |
| [ 3.904011] xor: using function: prefetch64-sse (7656.000 MB/sec) |
| [ 3.969804] Btrfs loaded, crc32c=crc32c-generic |
| [ 4.194085] BTRFS: device fsid 749a2872-dfdf-4601-a982-fedcd6f615c4 devid 1 transid 109976 /dev/sda1 |
| [ 4.255782] PM: Image not found (code -22) |
| [ 4.301320] BTRFS info (device sda1): disk space caching is enabled |
| [ 4.396057] usb 4-2: new full-speed USB device number 3 using uhci_hcd |
| [ 4.798110] usb 4-2: New USB device found, idVendor=147e, idProduct=2016, bcdDevice= 0.01 |
| [ 4.798113] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.798116] usb 4-2: Product: Fingerprint Sensor |
| [ 4.798118] usb 4-2: Manufacturer: TouchStrip |
| [ 4.972060] usb 1-7: new high-speed USB device number 5 using ehci-pci |
| [ 5.137534] usb 1-7: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 7.02 |
| [ 5.137537] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0 |
| [ 5.137539] usb 1-7: Product: USB2.0 Hub |
| [ 5.138069] hub 1-7:1.0: USB hub found |
| [ 5.138395] hub 1-7:1.0: 4 ports detected |
| [ 6.871588] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) |
| [ 6.888125] systemd[1]: Detected architecture x86-64. |
| [ 6.913049] systemd[1]: Set hostname to <t-rex>. |
| [ 9.426339] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 9.426363] systemd[1]: Reached target User and Group Name Lookups. |
| [ 9.426465] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 9.427094] systemd[1]: Listening on Syslog Socket. |
| [ 9.427198] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 9.427300] systemd[1]: Listening on Journal Audit Socket. |
| [ 9.427443] systemd[1]: Listening on fsck to fsckd communication Socket. |
| [ 9.427578] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 9.429420] systemd[1]: Created slice system-getty.slice. |
| [ 9.429563] systemd[1]: Listening on udev Kernel Socket. |
| [ 9.869108] BTRFS info (device sda1): disk space caching is enabled |
| [ 10.254472] RPC: Registered named UNIX socket transport module. |
| [ 10.254474] RPC: Registered udp transport module. |
| [ 10.254475] RPC: Registered tcp transport module. |
| [ 10.254477] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 10.257454] lp: driver loaded but no devices found |
| [ 10.276086] systemd-journald[244]: Received request to flush runtime journal from PID 1 |
| [ 10.335573] ppdev: user-space parallel port driver |
| [ 12.852558] audit: type=1400 audit(1542469486.012:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=303 comm="apparmor_parser" |
| [ 12.852565] audit: type=1400 audit(1542469486.012:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=303 comm="apparmor_parser" |
| [ 12.852568] audit: type=1400 audit(1542469486.012:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=303 comm="apparmor_parser" |
| [ 12.934959] audit: type=1400 audit(1542469486.092:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=304 comm="apparmor_parser" |
| [ 12.980704] audit: type=1400 audit(1542469486.140:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=305 comm="apparmor_parser" |
| [ 13.033854] audit: type=1400 audit(1542469486.192:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=302 comm="apparmor_parser" |
| [ 13.033860] audit: type=1400 audit(1542469486.192:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=302 comm="apparmor_parser" |
| [ 13.033863] audit: type=1400 audit(1542469486.192:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=302 comm="apparmor_parser" |
| [ 13.033867] audit: type=1400 audit(1542469486.192:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=302 comm="apparmor_parser" |
| [ 13.033870] audit: type=1400 audit(1542469486.192:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=302 comm="apparmor_parser" |
| [ 14.204119] ACPI: AC Adapter [AC] (on-line) |
| [ 14.373655] ACPI: Battery Slot [BAT0] (battery present) |
| [ 14.468207] intel_rng: FWH not detected |
| [ 14.504338] ACPI: Battery Slot [BAT1] (battery absent) |
| [ 14.626729] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 14.626795] sr 1:0:0:0: Attached scsi generic sg1 type 5 |
| [ 14.850494] leds_ss4200: no LED devices found |
| [ 14.881107] yenta_cardbus 0000:05:05.0: CardBus bridge found [104c:ac48] |
| [ 14.881128] yenta_cardbus 0000:05:05.0: Enabling burst memory read transactions |
| [ 14.881134] yenta_cardbus 0000:05:05.0: Using CSCINT to route CSC interrupts to PCI |
| [ 14.881136] yenta_cardbus 0000:05:05.0: Routing CardBus interrupts to PCI |
| [ 14.881142] yenta_cardbus 0000:05:05.0: TI: mfunc 0x01aa1b22, devctl 0x64 |
| [ 15.039036] input: PC Speaker as /devices/platform/pcspkr/input/input14 |
| [ 15.128823] yenta_cardbus 0000:05:05.0: ISA IRQ mask 0x0ce8, PCI irq 16 |
| [ 15.128828] yenta_cardbus 0000:05:05.0: Socket status: 30000006 |
| [ 15.128835] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [io 0x1000-0x2fff] |
| [ 15.128838] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff] |
| [ 15.128841] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff: |
| [ 15.128846] excluding 0xe0000000-0xe020ffff 0xe1ef0000-0xe20fffff |
| [ 15.128856] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref] |
| [ 15.128859] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff: |
| [ 15.128863] excluding 0xe2100000-0xe40fffff |
| [ 15.519432] iTCO_vendor_support: vendor-support=0 |
| [ 15.840313] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 15.840395] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0560) |
| [ 15.840538] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 16.023143] usbcore: registered new interface driver usbserial_generic |
| [ 16.023157] usbserial: USB Serial support registered for generic |
| [ 16.076500] usbcore: registered new interface driver usb_debug |
| [ 16.076520] usbserial: USB Serial support registered for debug |
| [ 16.076533] usbserial: USB Serial support registered for xhci_dbc |
| [ 16.076559] usb_debug 1-1:1.0: debug converter detected |
| [ 16.076667] usb 1-1: debug converter now attached to ttyUSB0 |
| [ 16.846603] Bluetooth: Core ver 2.22 |
| [ 16.846623] NET: Registered protocol family 31 |
| [ 16.846624] Bluetooth: HCI device and connection manager initialized |
| [ 16.846630] Bluetooth: HCI socket layer initialized |
| [ 16.846633] Bluetooth: L2CAP socket layer initialized |
| [ 16.846643] Bluetooth: SCO socket layer initialized |
| [ 17.071316] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0 |
| [ 17.071721] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line |
| [ 17.071724] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) |
| [ 17.071727] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) |
| [ 17.071729] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 17.071730] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 17.071733] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 |
| [ 17.071736] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x1a |
| [ 17.071738] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 |
| [ 17.190834] intel_powerclamp: No package C-state available |
| [ 17.220439] intel_powerclamp: No package C-state available |
| [ 17.255845] Adding 4789244k swap on /dev/sda5. Priority:-2 extents:1 across:4789244k FS |
| [ 17.284225] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 17.284551] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 17.284630] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 17.284710] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| [ 17.284790] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 |
| [ 17.294872] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s |
| [ 17.294873] iwl3945: Copyright(c) 2003-2011 Intel Corporation |
| [ 17.294874] iwl3945: hw_scan is disabled |
| [ 17.348875] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels |
| [ 17.348878] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG |
| [ 17.502048] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' |
| [ 17.836749] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: |
| [ 17.836759] excluding 0xc4000-0xc7fff 0xf0000-0xfffff |
| [ 17.836804] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: |
| [ 17.836827] excluding 0xa0000000-0xa0ffffff |
| [ 17.836856] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: |
| [ 17.836878] excluding 0x60000000-0x60ffffff |
| [ 17.900931] usbcore: registered new interface driver btusb |
| [ 23.555954] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 23.555956] Bluetooth: BNEP filters: protocol multicast |
| [ 23.555963] Bluetooth: BNEP socket layer initialized |
| [ 26.770763] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 26.812100] r8169 0000:04:00.0 eth0: link down |
| [ 26.812343] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 26.830890] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 27.031333] iwl3945 0000:02:00.0: firmware: direct-loading firmware iwlwifi-3945-2.ucode |
| [ 27.031342] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9 |
| [ 27.109882] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 27.189356] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 35.171172] fuse init (API version 7.27) |
| [ 63.088053] random: crng init done |
| [ 63.088056] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 63.096002] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 66.577622] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 70.041441] wlan0: authenticate with 70:3a:cb:bd:fd:e3 |
| [ 70.047728] wlan0: send auth to 70:3a:cb:bd:fd:e3 (try 1/3) |
| [ 70.048963] wlan0: authenticated |
| [ 70.052060] wlan0: associate with 70:3a:cb:bd:fd:e3 (try 1/3) |
| [ 70.054357] wlan0: RX AssocResp from 70:3a:cb:bd:fd:e3 (capab=0x1011 status=0 aid=4) |
| [ 70.055469] wlan0: associated |
| [ 70.122220] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| [ 70.122619] iwl3945 0000:02:00.0: Enabling power save might cause firmware crashes |
| [ 70.122732] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 70:3a:cb:bd:fd:e3 |
| [ 100.385582] rfkill: input handler disabled |
| [ 103.112743] Bluetooth: RFCOMM TTY layer initialized |
| [ 103.112752] Bluetooth: RFCOMM socket layer initialized |
| [ 103.112761] Bluetooth: RFCOMM ver 1.11 |