[    0.000000] Linux version 4.18.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-30)) #1 SMP Debian 4.18.10-2 (2018-11-02)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-amd64 root=UUID=749a2872-dfdf-4601-a982-fedcd6f615c4 ro quiet
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf304fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf305000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Getac P470/P470, BIOS 4.8-2204-ge0e98eb11d 11/17/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0xbf305 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BF400000 mask FFFC00000 uncachable
[    0.000000]   3 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   4 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000f60a0-0x000f60af] mapped at [(____ptrval____)]
[    0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[    0.000000] BRK [0x5d44b000, 0x5d44bfff] PGTABLE
[    0.000000] BRK [0x5d44c000, 0x5d44cfff] PGTABLE
[    0.000000] BRK [0x5d44d000, 0x5d44dfff] PGTABLE
[    0.000000] BRK [0x5d44e000, 0x5d44efff] PGTABLE
[    0.000000] BRK [0x5d44f000, 0x5d44ffff] PGTABLE
[    0.000000] BRK [0x5d450000, 0x5d450fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32a3d000-0x35515fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6250 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BF3060E0 000054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BF30A010 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BF306280 003D81 (v02 COREv4 COREBOOT 20090419 INTL 20180810)
[    0.000000] ACPI: FACS 0x00000000BF306240 000040
[    0.000000] ACPI: FACS 0x00000000BF306240 000040
[    0.000000] ACPI: SSDT 0x00000000BF30A110 000758 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x00000000BF30A870 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BF30A8B0 000068 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: ECDT 0x00000000BF30A920 000054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BF30C980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bf304fff]
[    0.000000] NODE_DATA(0) allocated [mem 0xbf300000-0xbf304fff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000bf304fff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bf304fff]
[    0.000000] Reserved but unavailable: 3421 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bf304fff]
[    0.000000] On node 0 totalpages: 783011
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12173 pages used for memmap
[    0.000000]   DMA32 zone: 779013 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x94/0x52e with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u1048576
[    0.000000] pcpu-alloc: s142744 r8192 d29288 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 770753
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-2-amd64 root=UUID=749a2872-dfdf-4601-a982-fedcd6f615c4 ro quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3015616K/3132044K available (10252K kernel code, 1223K rwdata, 3260K rodata, 1548K init, 656K bss, 116428K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31267 entries in 123 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 1995.168 MHz processor
[    0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3984b3ac44f, max_idle_ns: 881590752339 ns
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.33 BogoMIPS (lpj=7980672)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.024000] AppArmor: AppArmor initialized
[    0.028340] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.030280] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.030387] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.030450] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.030874] mce: CPU supports 6 MCE banks
[    0.030886] CPU0: Thermal monitoring enabled (TM2)
[    0.030889] process: using mwait in idle threads
[    0.030896] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.030897] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.030900] Spectre V2 : Mitigation: Full generic retpoline
[    0.030901] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.030902] Speculative Store Bypass: Vulnerable
[    0.031065] Freeing SMP alternatives memory: 24K
[    0.036000] smpboot: CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz (family: 0x6, model: 0xf, stepping: 0x6)
[    0.036000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[    0.036000] core: PEBS disabled due to CPU errata
[    0.036000] ... version:                2
[    0.036000] ... bit width:              40
[    0.036000] ... generic registers:      2
[    0.036000] ... value mask:             000000ffffffffff
[    0.036000] ... max period:             000000007fffffff
[    0.036000] ... fixed-purpose events:   3
[    0.036000] ... event mask:             0000000700000003
[    0.036000] Hierarchical SRCU implementation.
[    0.036000] smp: Bringing up secondary CPUs ...
[    0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.036000] x86: Booting SMP configuration:
[    0.036000] .... node  #0, CPUs:      #1
[    0.036121] smp: Brought up 1 node, 2 CPUs
[    0.036121] smpboot: Max logical packages: 1
[    0.036121] smpboot: Total of 2 processors activated (7980.67 BogoMIPS)
[    0.038283] devtmpfs: initialized
[    0.038283] x86/mm: Memory block size: 128MB
[    0.040095] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040103] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.040178] pinctrl core: initialized pinctrl subsystem
[    0.040444] NET: Registered protocol family 16
[    0.040573] audit: initializing netlink subsys (disabled)
[    0.040587] audit: type=2000 audit(1542469472.040:1): state=initialized audit_enabled=0 res=1
[    0.040587] cpuidle: using governor ladder
[    0.040587] cpuidle: using governor menu
[    0.040587] ACPI: bus type PCI registered
[    0.040587] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040587] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.040587] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.040587] PCI: Using configuration type 1 for base access
[    0.041283] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.041283] ACPI: Added _OSI(Module Device)
[    0.041283] ACPI: Added _OSI(Processor Device)
[    0.041283] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.041283] ACPI: Added _OSI(Processor Aggregator Device)
[    0.041283] ACPI: Added _OSI(Linux-Dell-Video)
[    0.041283] ACPI: EC: EC started
[    0.041283] ACPI: EC: interrupt blocked
[    0.041283] ACPI: \: Used as first EC
[    0.041283] ACPI: \: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.041283] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.044947] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.045742] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.048700] ACPI: Interpreter enabled
[    0.048728] ACPI: (supports S0 S3 S4 S5)
[    0.048731] ACPI: Using IOAPIC for interrupt routing
[    0.048780] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.049018] ACPI: Enabled 12 GPEs in block 00 to 1F
[    0.308263] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.308269] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.308327] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.308338] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.308400] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff])
[    0.308643] PCI host bridge to bus 0000:00
[    0.308646] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.308648] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.308650] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.308652] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.308654] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.308657] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.308659] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.308661] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.308663] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.308665] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.308667] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.308669] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.308671] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.308673] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.308675] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.308677] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.308679] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.308682] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.308694] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.308841] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[    0.308855] pci 0000:00:02.0: reg 0x10: [mem 0xe4300000-0xe437ffff]
[    0.308861] pci 0000:00:02.0: reg 0x14: [io  0x4090-0x4097]
[    0.308867] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.308874] pci 0000:00:02.0: reg 0x1c: [mem 0xe4400000-0xe443ffff]
[    0.309003] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.309015] pci 0000:00:02.1: reg 0x10: [mem 0xe4380000-0xe43fffff]
[    0.309205] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.309237] pci 0000:00:1b.0: reg 0x10: [mem 0xe4440000-0xe4443fff 64bit]
[    0.309348] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.309487] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.309601] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.309740] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.309859] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.309998] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.310109] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.310246] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.310365] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.310506] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.310567] pci 0000:00:1d.0: reg 0x20: [io  0x4000-0x401f]
[    0.310706] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.310766] pci 0000:00:1d.1: reg 0x20: [io  0x4020-0x403f]
[    0.310902] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.310961] pci 0000:00:1d.2: reg 0x20: [io  0x4040-0x405f]
[    0.311099] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.311159] pci 0000:00:1d.3: reg 0x20: [io  0x4060-0x407f]
[    0.311305] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.311333] pci 0000:00:1d.7: reg 0x10: [mem 0xe4444000-0xe44443ff]
[    0.311435] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.311555] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.311739] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.311859] pci 0000:00:1f.0: quirk: [io  0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO
[    0.311865] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.311869] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 02e0 (mask 001f)
[    0.311873] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 00ff)
[    0.311878] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[    0.312029] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
[    0.312055] pci 0000:00:1f.2: reg 0x10: [io  0x4098-0x409f]
[    0.312066] pci 0000:00:1f.2: reg 0x14: [io  0x40a8-0x40ab]
[    0.312078] pci 0000:00:1f.2: reg 0x18: [io  0x40a0-0x40a7]
[    0.312089] pci 0000:00:1f.2: reg 0x1c: [io  0x40ac-0x40af]
[    0.312101] pci 0000:00:1f.2: reg 0x20: [io  0x4080-0x408f]
[    0.312126] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.312128] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.312130] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.312132] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.312166] pci 0000:00:1f.2: PME# supported from D3hot
[    0.312281] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.312360] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.312561] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.312689] pci 0000:02:00.0: [8086:4222] type 00 class 0x028000
[    0.312787] pci 0000:02:00.0: reg 0x10: [mem 0xe4100000-0xe4100fff]
[    0.313236] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.313423] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.313451] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.313459] pci 0000:00:1c.1:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.313530] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.313630] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.313674] pci 0000:04:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.313716] pci 0000:04:00.0: reg 0x18: [mem 0xe4220000-0xe4220fff 64bit]
[    0.313764] pci 0000:04:00.0: reg 0x30: [mem 0xe4200000-0xe421ffff pref]
[    0.313779] pci 0000:04:00.0: enabling Extended Tags
[    0.313903] pci 0000:04:00.0: supports D1 D2
[    0.313905] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.314024] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.314036] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.314041] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.314046] pci 0000:00:1c.3:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.314078] pci_bus 0000:05: extended config space not accessible
[    0.314183] pci 0000:05:05.0: [104c:8039] type 02 class 0x060700
[    0.314210] pci 0000:05:05.0: reg 0x10: [mem 0xe2004000-0xe2004fff]
[    0.314255] pci 0000:05:05.0: supports D1 D2
[    0.314257] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.314359] pci 0000:05:05.1: [104c:803a] type 00 class 0x0c0010
[    0.314385] pci 0000:05:05.1: reg 0x10: [mem 0xe2008000-0xe20087ff]
[    0.314399] pci 0000:05:05.1: reg 0x14: [mem 0xe0000000-0xe0003fff]
[    0.314505] pci 0000:05:05.1: supports D1 D2
[    0.314507] pci 0000:05:05.1: PME# supported from D0 D1 D2 D3hot
[    0.314593] pci 0000:05:05.2: [104c:803b] type 00 class 0x018000
[    0.314618] pci 0000:05:05.2: reg 0x10: [mem 0xe2005000-0xe2005fff]
[    0.314732] pci 0000:05:05.2: supports D1 D2
[    0.314734] pci 0000:05:05.2: PME# supported from D0 D1 D2 D3hot
[    0.314820] pci 0000:05:05.3: [104c:803c] type 00 class 0x080501
[    0.314845] pci 0000:05:05.3: reg 0x10: [mem 0xe2009000-0xe20090ff]
[    0.314960] pci 0000:05:05.3: supports D1 D2
[    0.314962] pci 0000:05:05.3: PME# supported from D0 D1 D2 D3hot
[    0.315048] pci 0000:05:05.4: [104c:803d] type 00 class 0x078000
[    0.315073] pci 0000:05:05.4: reg 0x10: [mem 0xe2006000-0xe2006fff]
[    0.315087] pci 0000:05:05.4: reg 0x14: [mem 0xe2007000-0xe2007fff]
[    0.315189] pci 0000:05:05.4: supports D1 D2
[    0.315191] pci 0000:05:05.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.315320] pci 0000:00:1e.0: PCI bridge to [bus 05-06] (subtractive decode)
[    0.315325] pci 0000:00:1e.0:   bridge window [io  0x1000-0x2fff]
[    0.315330] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.315338] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.315340] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.315343] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.315345] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.315347] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.315349] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.315351] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[    0.315354] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.315356] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.315358] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.315360] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.315362] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.315364] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.315366] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.315369] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.315371] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.315373] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[    0.315375] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.315412] pci_bus 0000:06: extended config space not accessible
[    0.315438] pci_bus 0000:06: busn_res: [bus 06] end can not be updated to 09
[    0.315444] pci 0000:00:1e.0: bridge has subordinate 06 but max busn 09
[    0.315607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15)
[    0.315678] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 11 12 14 15) *10
[    0.315747] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12 14 15)
[    0.315815] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 11 12 14 15) *10
[    0.315884] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.315952] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.316027] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12 14 15)
[    0.316096] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *10
[    0.317094] ACPI: EC: interrupt unblocked
[    0.317120] ACPI: EC: event unblocked
[    0.317132] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.317134] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.317243] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.317243] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.317243] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.317243] vgaarb: loaded
[    0.317243] pps_core: LinuxPPS API ver. 1 registered
[    0.317243] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.317243] PTP clock support registered
[    0.317243] EDAC MC: Ver: 3.0.0
[    0.317243] PCI: Using ACPI for IRQ routing
[    0.318498] PCI: pci_cache_line_size set to 64 bytes
[    0.318593] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.318595] e820: reserve RAM buffer [mem 0xbf305000-0xbfffffff]
[    0.320104] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.320112] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.320118] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.322132] clocksource: Switched to clocksource tsc-early
[    0.339785] VFS: Disk quotas dquot_6.6.0
[    0.339814] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.340033] AppArmor: AppArmor Filesystem Enabled
[    0.340066] pnp: PnP ACPI init
[    0.594178] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.594181] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.594184] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.594186] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.594189] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.594191] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.594194] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.594196] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.594205] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.594527] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.594534] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.594613] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.594616] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.594618] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.594625] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.594667] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.595065] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.595214] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (disabled)
[    0.595589] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.595959] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.596006] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.596048] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.596084] pnp: PnP ACPI: found 10 devices
[    0.603232] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.603256] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.603260] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.603263] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.603319] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[    0.603331] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.603335] pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.603339] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.603343] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.603349] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
[    0.603354] pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.603362] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.603368] pci 0000:00:1c.1:   bridge window [mem 0xe4100000-0xe41fffff]
[    0.603379] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.603394] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.603397] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.603404] pci 0000:00:1c.3:   bridge window [mem 0xe4200000-0xe42fffff]
[    0.603423] pci 0000:05:05.0: BAR 15: assigned [mem 0xc4000000-0xc7ffffff pref]
[    0.603429] pci 0000:05:05.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
[    0.603432] pci 0000:05:05.0: BAR 13: assigned [io  0x1000-0x10ff]
[    0.603434] pci 0000:05:05.0: BAR 14: assigned [io  0x1400-0x14ff]
[    0.603437] pci 0000:05:05.0: CardBus bridge to [bus 06]
[    0.603439] pci 0000:05:05.0:   bridge window [io  0x1000-0x10ff]
[    0.603445] pci 0000:05:05.0:   bridge window [io  0x1400-0x14ff]
[    0.603450] pci 0000:05:05.0:   bridge window [mem 0xc4000000-0xc7ffffff pref]
[    0.603455] pci 0000:05:05.0:   bridge window [mem 0xc8000000-0xcbffffff]
[    0.603462] pci 0000:00:1e.0: PCI bridge to [bus 05-06]
[    0.603465] pci 0000:00:1e.0:   bridge window [io  0x1000-0x2fff]
[    0.603471] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe20fffff]
[    0.603476] pci 0000:00:1e.0:   bridge window [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.603484] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.603486] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.603488] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.603491] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.603493] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.603495] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.603497] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.603499] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.603501] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.603503] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.603505] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.603507] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.603509] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.603511] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.603513] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.603516] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xfebfffff window]
[    0.603518] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.603520] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.603522] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc01fffff]
[    0.603524] pci_bus 0000:01: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[    0.603526] pci_bus 0000:02: resource 1 [mem 0xe4100000-0xe41fffff]
[    0.603529] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.603531] pci_bus 0000:04: resource 1 [mem 0xe4200000-0xe42fffff]
[    0.603533] pci_bus 0000:05: resource 0 [io  0x1000-0x2fff]
[    0.603535] pci_bus 0000:05: resource 1 [mem 0xe0000000-0xe20fffff]
[    0.603537] pci_bus 0000:05: resource 2 [mem 0xe2100000-0xe40fffff 64bit pref]
[    0.603539] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.603541] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.603543] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.603545] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.603547] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.603549] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.603552] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.603554] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.603556] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.603558] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.603560] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.603562] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.603564] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.603566] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window]
[    0.603568] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.603570] pci_bus 0000:05: resource 19 [mem 0xc0000000-0xfebfffff window]
[    0.603572] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.603574] pci_bus 0000:06: resource 0 [io  0x1000-0x10ff]
[    0.603576] pci_bus 0000:06: resource 1 [io  0x1400-0x14ff]
[    0.603578] pci_bus 0000:06: resource 2 [mem 0xc4000000-0xc7ffffff pref]
[    0.603580] pci_bus 0000:06: resource 3 [mem 0xc8000000-0xcbffffff]
[    0.603691] NET: Registered protocol family 2
[    0.603933] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.603969] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.604139] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.604424] TCP: Hash tables configured (established 32768 bind 32768)
[    0.604504] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.604545] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.604633] NET: Registered protocol family 1
[    0.604656] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.605665] PCI: CLS 64 bytes, default 64
[    0.605727] Unpacking initramfs...
[    1.595243] Freeing initrd memory: 43876K
[    1.596581] Initialise system trusted keyrings
[    1.596692] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.599179] zbud: loaded
[    1.599529] pstore: using deflate compression
[    2.163802] Key type asymmetric registered
[    2.163804] Asymmetric key parser 'x509' registered
[    2.163874] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    2.163927] io scheduler noop registered
[    2.163929] io scheduler deadline registered
[    2.163997] io scheduler cfq registered (default)
[    2.163998] io scheduler mq-deadline registered
[    2.164198] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[    2.165211] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    2.165242] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    2.165273] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[    2.165310] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[    2.165343] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+ (with Cmd Compl erratum)
[    2.165402] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.165423] intel_idle: does not run on family 6 model 15
[    2.166504] Monitor-Mwait will be used to enter C-1 state
[    2.166512] tsc: Marking TSC unstable due to TSC halts in idle
[    2.166745] clocksource: Switched to clocksource hpet
[    2.167037] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.187738] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.187881] serial 00:05: [io  0x02f8-0x02ff]
[    2.187961] serial 00:05: [irq 3]
[    2.188713] serial 00:05: activated
[    2.209360] 00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.230134] 00:06: ttyS2 at I/O 0x3e8 (irq = 5, base_baud = 115200) is a 16550A
[    2.250904] 00:07: ttyS3 at I/O 0x2e8 (irq = 5, base_baud = 115200) is a 16550A
[    2.251341] Linux agpgart interface v0.103
[    2.251482] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.251483] AMD IOMMUv2 functionality not available on this system
[    2.251774] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.254290] i8042: Detected active multiplexing controller, rev 1.1
[    2.255508] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.255514] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.255560] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.255597] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.255636] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.255839] mousedev: PS/2 mouse device common for all mice
[    2.255900] rtc_cmos 00:03: RTC can wake from S4
[    2.256133] rtc_cmos 00:03: registered as rtc0
[    2.256159] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.256206] ledtrig-cpu: registered to indicate activity on CPUs
[    2.256632] NET: Registered protocol family 10
[    2.262805] Segment Routing with IPv6
[    2.262836] mip6: Mobile IPv6
[    2.262840] NET: Registered protocol family 17
[    2.262847] mpls_gso: MPLS GSO support
[    2.263081] microcode: sig=0x6f6, pf=0x20, revision=0xd1
[    2.263165] microcode: Microcode Update Driver: v2.2.
[    2.263417] registered taskstats version 1
[    2.263418] Loading compiled-in X.509 certificates
[    2.280630] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.337137] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[    2.337165] zswap: loaded using pool lzo/zbud
[    2.337369] AppArmor: AppArmor sha1 policy hashing enabled
[    2.337916] rtc_cmos 00:03: setting system clock to 2018-11-17 15:44:35 UTC (1542469475)
[    2.337948] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    2.341457] Freeing unused kernel image memory: 1548K
[    2.352110] Write protecting the kernel read-only data: 16384k
[    2.353452] Freeing unused kernel image memory: 2028K
[    2.354011] Freeing unused kernel image memory: 836K
[    2.366700] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.366702] x86/mm: Checking user space page tables
[    2.379265] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.486225] input: Lid Switch as /devices/LNXSYSTM:00/PNP0C0D:00/input/input4
[    2.486241] ACPI: Lid Switch [LID0]
[    2.491846] input: Sleep Button as /devices/LNXSYSTM:00/PNP0C0E:00/input/input5
[    2.491865] ACPI: Sleep Button [SLPB]
[    2.492639] input: Power Button as /devices/LNXSYSTM:00/PNP0C0C:00/input/input6
[    2.492662] ACPI: Power Button [PWRB]
[    2.492731] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    2.492745] ACPI: Power Button [PWRF]
[    2.524209] ACPI: bus type USB registered
[    2.524257] usbcore: registered new interface driver usbfs
[    2.524281] usbcore: registered new interface driver hub
[    2.526120] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.526696] r8169 0000:04:00.0 eth0: RTL8168b/8111b, 00:40:d0:e4:58:4b, XID 38000000, IRQ 28
[    2.526698] r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    2.526747] usbcore: registered new device driver usb
[    2.529470] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.529957] ehci-pci: EHCI PCI platform driver
[    2.530167] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.530179] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.530196] ehci-pci 0000:00:1d.7: debug port 1
[    2.530474] uhci_hcd: USB Universal Host Controller Interface driver
[    2.534124] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.534587] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe4444000
[    2.539110] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.539281] ACPI: Invalid active0 threshold
[    2.539966] thermal LNXTHERM:00: registered as thermal_zone0
[    2.539967] ACPI: Thermal Zone [THRM] (53 C)
[    2.540746] sdhci: Secure Digital Host Controller Interface driver
[    2.540747] sdhci: Copyright(c) Pierre Ossman
[    2.542783] sdhci-pci 0000:05:05.3: SDHCI controller found [104c:803c] (rev 0)
[    2.542902] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    2.548090] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.548195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    2.548198] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.548201] usb usb1: Product: EHCI Host Controller
[    2.548203] usb usb1: Manufacturer: Linux 4.18.0-2-amd64 ehci_hcd
[    2.548205] usb usb1: SerialNumber: 0000:00:1d.7
[    2.548417] hub 1-0:1.0: USB hub found
[    2.548429] hub 1-0:1.0: 8 ports detected
[    2.549052] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.549064] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.549074] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.549102] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004000
[    2.549186] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    2.549189] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.549191] usb usb2: Product: UHCI Host Controller
[    2.549193] usb usb2: Manufacturer: Linux 4.18.0-2-amd64 uhci_hcd
[    2.549195] usb usb2: SerialNumber: 0000:00:1d.0
[    2.549357] hub 2-0:1.0: USB hub found
[    2.549368] hub 2-0:1.0: 2 ports detected
[    2.549677] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.549687] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.549696] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.549725] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004020
[    2.549805] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    2.549807] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.549810] usb usb3: Product: UHCI Host Controller
[    2.549812] usb usb3: Manufacturer: Linux 4.18.0-2-amd64 uhci_hcd
[    2.549814] usb usb3: SerialNumber: 0000:00:1d.1
[    2.549954] hub 3-0:1.0: USB hub found
[    2.549972] hub 3-0:1.0: 2 ports detected
[    2.550101] mmc0: SDHCI controller on PCI [0000:05:05.3] using DMA
[    2.550248] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.550255] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.550265] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.550298] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[    2.550375] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    2.550378] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.550380] usb usb4: Product: UHCI Host Controller
[    2.550382] usb usb4: Manufacturer: Linux 4.18.0-2-amd64 uhci_hcd
[    2.550384] usb usb4: SerialNumber: 0000:00:1d.2
[    2.550533] hub 4-0:1.0: USB hub found
[    2.550543] hub 4-0:1.0: 2 ports detected
[    2.550793] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.550800] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.550809] uhci_hcd 0000:00:1d.3: detected 2 ports
[    2.550836] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004060
[    2.550912] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    2.550914] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.550916] usb usb5: Product: UHCI Host Controller
[    2.550918] usb usb5: Manufacturer: Linux 4.18.0-2-amd64 uhci_hcd
[    2.550920] usb usb5: SerialNumber: 0000:00:1d.3
[    2.551061] hub 5-0:1.0: USB hub found
[    2.551071] hub 5-0:1.0: 2 ports detected
[    2.552133] SCSI subsystem initialized
[    2.560736] libata version 3.00 loaded.
[    2.562374] ata_piix 0000:00:1f.2: version 2.13
[    2.562538] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    2.564945] scsi host0: ata_piix
[    2.597504] pci 0000:00:00.0: Intel 945GM Chipset
[    2.597517] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    2.598528] pci 0000:00:00.0: detected 8192K stolen memory
[    2.598569] [drm] Replacing VGA console driver
[    2.599316] Console: switching to colour dummy device 80x25
[    2.599815] scsi host1: ata_piix
[    2.599912] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4080 irq 14
[    2.599914] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4088 irq 15
[    2.650661] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.650663] [drm] Driver supports precise vblank timestamp query.
[    2.651002] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.652124] firewire_ohci 0000:05:05.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    2.660682] random: fast init done
[    2.665113] [drm] RC6 disabled, disabling runtime PM support
[    2.665175] [drm] initialized overlay support
[    2.666080] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    2.666279] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.666625] acpi device:03: registered as cooling_device2
[    2.666706] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[    2.684365] fbcon: inteldrmfb (fb0) is primary device
[    2.734321] Console: switching to colour frame buffer device 160x50
[    2.758897] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.763042] ata2.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.60, max UDMA/33
[    2.763198] ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
[    2.763200] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.768616] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2120B 0012 PQ: 0 ANSI: 5
[    2.770909] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.60 PQ: 0 ANSI: 5
[    2.805526] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    2.805539] sd 0:0:0:0: [sda] Write Protect is off
[    2.805542] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.805558] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.833893] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.833898] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.834245] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.888060] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.913809]  sda: sda1 sda2 < sda5 >
[    2.914329] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.045779] usb 1-1: New USB device found, idVendor=0525, idProduct=127a, bcdDevice= 1.01
[    3.045782] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.045785] usb 1-1: Product: Ajays USB 2.0 Debug Cable
[    3.045787] usb 1-1: Manufacturer: Ajays Technology
[    3.045789] usb 1-1: SerialNumber: Ajays002
[    3.168159] firewire_core 0000:05:05.1: created device fw0: GUID 0040d00100437d35, S400
[    3.322314] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000/0x0/0x0, board id: 0, fw id: 50149
[    3.359217] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[    3.480017] raid6: sse2x1   gen()  2873 MB/s
[    3.548012] raid6: sse2x1   xor()  3376 MB/s
[    3.584036] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    3.616016] raid6: sse2x2   gen()  3850 MB/s
[    3.684011] raid6: sse2x2   xor()  3995 MB/s
[    3.752018] raid6: sse2x4   gen()  6125 MB/s
[    3.789107] usb 4-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=19.58
[    3.789110] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.820016] raid6: sse2x4   xor()  4270 MB/s
[    3.820018] raid6: using algorithm sse2x4 gen() 6125 MB/s
[    3.820019] raid6: .... xor() 4270 MB/s, rmw enabled
[    3.820021] raid6: using ssse3x2 recovery algorithm
[    3.824374] xor: measuring software checksum speed
[    3.864011]    prefetch64-sse:  7656.000 MB/sec
[    3.904010]    generic_sse:  6806.000 MB/sec
[    3.904011] xor: using function: prefetch64-sse (7656.000 MB/sec)
[    3.969804] Btrfs loaded, crc32c=crc32c-generic
[    4.194085] BTRFS: device fsid 749a2872-dfdf-4601-a982-fedcd6f615c4 devid 1 transid 109976 /dev/sda1
[    4.255782] PM: Image not found (code -22)
[    4.301320] BTRFS info (device sda1): disk space caching is enabled
[    4.396057] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[    4.798110] usb 4-2: New USB device found, idVendor=147e, idProduct=2016, bcdDevice= 0.01
[    4.798113] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.798116] usb 4-2: Product: Fingerprint Sensor   
[    4.798118] usb 4-2: Manufacturer: TouchStrip        
[    4.972060] usb 1-7: new high-speed USB device number 5 using ehci-pci
[    5.137534] usb 1-7: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 7.02
[    5.137537] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    5.137539] usb 1-7: Product: USB2.0 Hub
[    5.138069] hub 1-7:1.0: USB hub found
[    5.138395] hub 1-7:1.0: 4 ports detected
[    6.871588] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    6.888125] systemd[1]: Detected architecture x86-64.
[    6.913049] systemd[1]: Set hostname to <t-rex>.
[    9.426339] random: systemd: uninitialized urandom read (16 bytes read)
[    9.426363] systemd[1]: Reached target User and Group Name Lookups.
[    9.426465] random: systemd: uninitialized urandom read (16 bytes read)
[    9.427094] systemd[1]: Listening on Syslog Socket.
[    9.427198] random: systemd: uninitialized urandom read (16 bytes read)
[    9.427300] systemd[1]: Listening on Journal Audit Socket.
[    9.427443] systemd[1]: Listening on fsck to fsckd communication Socket.
[    9.427578] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.429420] systemd[1]: Created slice system-getty.slice.
[    9.429563] systemd[1]: Listening on udev Kernel Socket.
[    9.869108] BTRFS info (device sda1): disk space caching is enabled
[   10.254472] RPC: Registered named UNIX socket transport module.
[   10.254474] RPC: Registered udp transport module.
[   10.254475] RPC: Registered tcp transport module.
[   10.254477] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.257454] lp: driver loaded but no devices found
[   10.276086] systemd-journald[244]: Received request to flush runtime journal from PID 1
[   10.335573] ppdev: user-space parallel port driver
[   12.852558] audit: type=1400 audit(1542469486.012:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=303 comm="apparmor_parser"
[   12.852565] audit: type=1400 audit(1542469486.012:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=303 comm="apparmor_parser"
[   12.852568] audit: type=1400 audit(1542469486.012:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=303 comm="apparmor_parser"
[   12.934959] audit: type=1400 audit(1542469486.092:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=304 comm="apparmor_parser"
[   12.980704] audit: type=1400 audit(1542469486.140:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=305 comm="apparmor_parser"
[   13.033854] audit: type=1400 audit(1542469486.192:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=302 comm="apparmor_parser"
[   13.033860] audit: type=1400 audit(1542469486.192:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=302 comm="apparmor_parser"
[   13.033863] audit: type=1400 audit(1542469486.192:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=302 comm="apparmor_parser"
[   13.033867] audit: type=1400 audit(1542469486.192:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=302 comm="apparmor_parser"
[   13.033870] audit: type=1400 audit(1542469486.192:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=302 comm="apparmor_parser"
[   14.204119] ACPI: AC Adapter [AC] (on-line)
[   14.373655] ACPI: Battery Slot [BAT0] (battery present)
[   14.468207] intel_rng: FWH not detected
[   14.504338] ACPI: Battery Slot [BAT1] (battery absent)
[   14.626729] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   14.626795] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   14.850494] leds_ss4200: no LED devices found
[   14.881107] yenta_cardbus 0000:05:05.0: CardBus bridge found [104c:ac48]
[   14.881128] yenta_cardbus 0000:05:05.0: Enabling burst memory read transactions
[   14.881134] yenta_cardbus 0000:05:05.0: Using CSCINT to route CSC interrupts to PCI
[   14.881136] yenta_cardbus 0000:05:05.0: Routing CardBus interrupts to PCI
[   14.881142] yenta_cardbus 0000:05:05.0: TI: mfunc 0x01aa1b22, devctl 0x64
[   15.039036] input: PC Speaker as /devices/platform/pcspkr/input/input14
[   15.128823] yenta_cardbus 0000:05:05.0: ISA IRQ mask 0x0ce8, PCI irq 16
[   15.128828] yenta_cardbus 0000:05:05.0: Socket status: 30000006
[   15.128835] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [io  0x1000-0x2fff]
[   15.128838] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe20fffff]
[   15.128841] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe20fffff:
[   15.128846]  excluding 0xe0000000-0xe020ffff 0xe1ef0000-0xe20fffff
[   15.128856] yenta_cardbus 0000:05:05.0: pcmcia: parent PCI bridge window: [mem 0xe2100000-0xe40fffff 64bit pref]
[   15.128859] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe2100000-0xe40fffff:
[   15.128863]  excluding 0xe2100000-0xe40fffff
[   15.519432] iTCO_vendor_support: vendor-support=0
[   15.840313] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   15.840395] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0560)
[   15.840538] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   16.023143] usbcore: registered new interface driver usbserial_generic
[   16.023157] usbserial: USB Serial support registered for generic
[   16.076500] usbcore: registered new interface driver usb_debug
[   16.076520] usbserial: USB Serial support registered for debug
[   16.076533] usbserial: USB Serial support registered for xhci_dbc
[   16.076559] usb_debug 1-1:1.0: debug converter detected
[   16.076667] usb 1-1: debug converter now attached to ttyUSB0
[   16.846603] Bluetooth: Core ver 2.22
[   16.846623] NET: Registered protocol family 31
[   16.846624] Bluetooth: HCI device and connection manager initialized
[   16.846630] Bluetooth: HCI socket layer initialized
[   16.846633] Bluetooth: L2CAP socket layer initialized
[   16.846643] Bluetooth: SCO socket layer initialized
[   17.071316] snd_hda_codec_realtek hdaudioC0D0: ALC262: SKU not ready 0x411111f0
[   17.071721] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC262: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
[   17.071724] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   17.071727] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   17.071729] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   17.071730] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   17.071733] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   17.071736] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x1a
[   17.071738] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   17.190834] intel_powerclamp: No package C-state available
[   17.220439] intel_powerclamp: No package C-state available
[   17.255845] Adding 4789244k swap on /dev/sda5.  Priority:-2 extents:1 across:4789244k FS
[   17.284225] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   17.284551] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   17.284630] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   17.284710] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   17.284790] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   17.294872] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[   17.294873] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[   17.294874] iwl3945: hw_scan is disabled
[   17.348875] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   17.348878] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   17.502048] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[   17.836749] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   17.836759]  excluding 0xc4000-0xc7fff 0xf0000-0xfffff
[   17.836804] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   17.836827]  excluding 0xa0000000-0xa0ffffff
[   17.836856] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   17.836878]  excluding 0x60000000-0x60ffffff
[   17.900931] usbcore: registered new interface driver btusb
[   23.555954] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.555956] Bluetooth: BNEP filters: protocol multicast
[   23.555963] Bluetooth: BNEP socket layer initialized
[   26.770763] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.812100] r8169 0000:04:00.0 eth0: link down
[   26.812343] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.830890] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.031333] iwl3945 0000:02:00.0: firmware: direct-loading firmware iwlwifi-3945-2.ucode
[   27.031342] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
[   27.109882] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   27.189356] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   35.171172] fuse init (API version 7.27)
[   63.088053] random: crng init done
[   63.088056] random: 7 urandom warning(s) missed due to ratelimiting
[   63.096002] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   66.577622] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   70.041441] wlan0: authenticate with 70:3a:cb:bd:fd:e3
[   70.047728] wlan0: send auth to 70:3a:cb:bd:fd:e3 (try 1/3)
[   70.048963] wlan0: authenticated
[   70.052060] wlan0: associate with 70:3a:cb:bd:fd:e3 (try 1/3)
[   70.054357] wlan0: RX AssocResp from 70:3a:cb:bd:fd:e3 (capab=0x1011 status=0 aid=4)
[   70.055469] wlan0: associated
[   70.122220] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   70.122619] iwl3945 0000:02:00.0: Enabling power save might cause firmware crashes
[   70.122732] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 70:3a:cb:bd:fd:e3
[  100.385582] rfkill: input handler disabled
[  103.112743] Bluetooth: RFCOMM TTY layer initialized
[  103.112752] Bluetooth: RFCOMM socket layer initialized
[  103.112761] Bluetooth: RFCOMM ver 1.11