| // Low level AHCI disk access |
| // |
| // Copyright (C) 2010 Gerd Hoffmann <kraxel@redhat.com> |
| // |
| // This file may be distributed under the terms of the GNU LGPLv3 license. |
| |
| #include "ahci.h" // CDB_CMD_READ_10 |
| #include "ata.h" // ATA_CB_STAT |
| #include "biosvar.h" // GET_GLOBAL |
| #include "blockcmd.h" // CDB_CMD_READ_10 |
| #include "malloc.h" // free |
| #include "output.h" // dprintf |
| #include "pci.h" // foreachpci |
| #include "pci_ids.h" // PCI_CLASS_STORAGE_OTHER |
| #include "pci_regs.h" // PCI_INTERRUPT_LINE |
| #include "stacks.h" // yield |
| #include "std/disk.h" // DISK_RET_SUCCESS |
| #include "string.h" // memset |
| #include "util.h" // timer_calc |
| #include "x86.h" // inb |
| |
| #define AHCI_REQUEST_TIMEOUT 32000 // 32 seconds max for IDE ops |
| #define AHCI_RESET_TIMEOUT 500 // 500 miliseconds |
| #define AHCI_LINK_TIMEOUT 10 // 10 miliseconds |
| |
| // prepare sata command fis |
| static void sata_prep_simple(struct sata_cmd_fis *fis, u8 command) |
| { |
| memset_fl(fis, 0, sizeof(*fis)); |
| fis->command = command; |
| } |
| |
| static void sata_prep_readwrite(struct sata_cmd_fis *fis, |
| struct disk_op_s *op, int iswrite) |
| { |
| u64 lba = op->lba; |
| u8 command; |
| |
| memset_fl(fis, 0, sizeof(*fis)); |
| |
| if (op->count >= (1<<8) || lba + op->count >= (1<<28)) { |
| fis->sector_count2 = op->count >> 8; |
| fis->lba_low2 = lba >> 24; |
| fis->lba_mid2 = lba >> 32; |
| fis->lba_high2 = lba >> 40; |
| lba &= 0xffffff; |
| command = (iswrite ? ATA_CMD_WRITE_DMA_EXT |
| : ATA_CMD_READ_DMA_EXT); |
| } else { |
| command = (iswrite ? ATA_CMD_WRITE_DMA |
| : ATA_CMD_READ_DMA); |
| } |
| fis->feature = 1; /* dma */ |
| fis->command = command; |
| fis->sector_count = op->count; |
| fis->lba_low = lba; |
| fis->lba_mid = lba >> 8; |
| fis->lba_high = lba >> 16; |
| fis->device = ((lba >> 24) & 0xf) | ATA_CB_DH_LBA; |
| } |
| |
| static void sata_prep_atapi(struct sata_cmd_fis *fis, u16 blocksize) |
| { |
| memset_fl(fis, 0, sizeof(*fis)); |
| fis->command = ATA_CMD_PACKET; |
| fis->feature = 1; /* dma */ |
| fis->lba_mid = blocksize; |
| fis->lba_high = blocksize >> 8; |
| } |
| |
| // ahci register access helpers |
| static u32 ahci_ctrl_readl(struct ahci_ctrl_s *ctrl, u32 reg) |
| { |
| u32 addr = ctrl->iobase + reg; |
| return readl((void*)addr); |
| } |
| |
| static void ahci_ctrl_writel(struct ahci_ctrl_s *ctrl, u32 reg, u32 val) |
| { |
| u32 addr = ctrl->iobase + reg; |
| writel((void*)addr, val); |
| } |
| |
| static u32 ahci_port_to_ctrl(u32 pnr, u32 port_reg) |
| { |
| u32 ctrl_reg = 0x100; |
| ctrl_reg += pnr * 0x80; |
| ctrl_reg += port_reg; |
| return ctrl_reg; |
| } |
| |
| static u32 ahci_port_readl(struct ahci_ctrl_s *ctrl, u32 pnr, u32 reg) |
| { |
| u32 ctrl_reg = ahci_port_to_ctrl(pnr, reg); |
| return ahci_ctrl_readl(ctrl, ctrl_reg); |
| } |
| |
| static void ahci_port_writel(struct ahci_ctrl_s *ctrl, u32 pnr, u32 reg, u32 val) |
| { |
| u32 ctrl_reg = ahci_port_to_ctrl(pnr, reg); |
| ahci_ctrl_writel(ctrl, ctrl_reg, val); |
| } |
| |
| // submit ahci command + wait for result |
| static int ahci_command(struct ahci_port_s *port_gf, int iswrite, int isatapi, |
| void *buffer, u32 bsize) |
| { |
| u32 val, status, success, flags, intbits, error; |
| struct ahci_ctrl_s *ctrl = port_gf->ctrl; |
| struct ahci_cmd_s *cmd = port_gf->cmd; |
| struct ahci_fis_s *fis = port_gf->fis; |
| struct ahci_list_s *list = port_gf->list; |
| u32 pnr = port_gf->pnr; |
| |
| cmd->fis.reg = 0x27; |
| cmd->fis.pmp_type = 1 << 7; /* cmd fis */ |
| cmd->prdt[0].base = (u32)buffer; |
| cmd->prdt[0].baseu = 0; |
| cmd->prdt[0].flags = bsize-1; |
| |
| flags = ((1 << 16) | /* one prd entry */ |
| (iswrite ? (1 << 6) : 0) | |
| (isatapi ? (1 << 5) : 0) | |
| (5 << 0)); /* fis length (dwords) */ |
| list[0].flags = flags; |
| list[0].bytes = 0; |
| list[0].base = (u32)(cmd); |
| list[0].baseu = 0; |
| |
| dprintf(8, "AHCI/%d: send cmd ...\n", pnr); |
| intbits = ahci_port_readl(ctrl, pnr, PORT_IRQ_STAT); |
| if (intbits) |
| ahci_port_writel(ctrl, pnr, PORT_IRQ_STAT, intbits); |
| ahci_port_writel(ctrl, pnr, PORT_SCR_ACT, 1); |
| ahci_port_writel(ctrl, pnr, PORT_CMD_ISSUE, 1); |
| |
| u32 end = timer_calc(AHCI_REQUEST_TIMEOUT); |
| do { |
| for (;;) { |
| intbits = ahci_port_readl(ctrl, pnr, PORT_IRQ_STAT); |
| if (intbits) { |
| ahci_port_writel(ctrl, pnr, PORT_IRQ_STAT, intbits); |
| if (intbits & 0x02) { |
| status = GET_LOWFLAT(fis->psfis[2]); |
| error = GET_LOWFLAT(fis->psfis[3]); |
| break; |
| } |
| if (intbits & 0x01) { |
| status = GET_LOWFLAT(fis->rfis[2]); |
| error = GET_LOWFLAT(fis->rfis[3]); |
| break; |
| } |
| } |
| if (timer_check(end)) { |
| warn_timeout(); |
| return -1; |
| } |
| yield(); |
| } |
| dprintf(8, "AHCI/%d: ... intbits 0x%x, status 0x%x ...\n", |
| pnr, intbits, status); |
| } while (status & ATA_CB_STAT_BSY); |
| |
| success = (0x00 == (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_DF | |
| ATA_CB_STAT_ERR)) && |
| ATA_CB_STAT_RDY == (status & (ATA_CB_STAT_RDY))); |
| if (success) { |
| dprintf(8, "AHCI/%d: ... finished, status 0x%x, OK\n", pnr, |
| status); |
| } else { |
| dprintf(2, "AHCI/%d: ... finished, status 0x%x, ERROR 0x%x\n", pnr, |
| status, error); |
| |
| // non-queued error recovery (AHCI 1.3 section 6.2.2.1) |
| // Clears PxCMD.ST to 0 to reset the PxCI register |
| val = ahci_port_readl(ctrl, pnr, PORT_CMD); |
| ahci_port_writel(ctrl, pnr, PORT_CMD, val & ~PORT_CMD_START); |
| |
| // waits for PxCMD.CR to clear to 0 |
| while (1) { |
| val = ahci_port_readl(ctrl, pnr, PORT_CMD); |
| if ((val & PORT_CMD_LIST_ON) == 0) |
| break; |
| yield(); |
| } |
| |
| // Clears any error bits in PxSERR to enable capturing new errors |
| val = ahci_port_readl(ctrl, pnr, PORT_SCR_ERR); |
| ahci_port_writel(ctrl, pnr, PORT_SCR_ERR, val); |
| |
| // Clears status bits in PxIS as appropriate |
| val = ahci_port_readl(ctrl, pnr, PORT_IRQ_STAT); |
| ahci_port_writel(ctrl, pnr, PORT_IRQ_STAT, val); |
| |
| // If PxTFD.STS.BSY or PxTFD.STS.DRQ is set to 1, issue |
| // a COMRESET to the device to put it in an idle state |
| val = ahci_port_readl(ctrl, pnr, PORT_TFDATA); |
| if (val & (ATA_CB_STAT_BSY | ATA_CB_STAT_DRQ)) { |
| dprintf(2, "AHCI/%d: issue comreset\n", pnr); |
| val = ahci_port_readl(ctrl, pnr, PORT_SCR_CTL); |
| // set Device Detection Initialization (DET) to 1 for 1 ms for comreset |
| ahci_port_writel(ctrl, pnr, PORT_SCR_CTL, val | 1); |
| mdelay (1); |
| ahci_port_writel(ctrl, pnr, PORT_SCR_CTL, val); |
| } |
| |
| // Sets PxCMD.ST to 1 to enable issuing new commands |
| val = ahci_port_readl(ctrl, pnr, PORT_CMD); |
| ahci_port_writel(ctrl, pnr, PORT_CMD, val | PORT_CMD_START); |
| } |
| return success ? 0 : -1; |
| } |
| |
| #define CDROM_CDB_SIZE 12 |
| |
| int ahci_atapi_process_op(struct disk_op_s *op) |
| { |
| if (! CONFIG_AHCI) |
| return 0; |
| |
| struct ahci_port_s *port_gf = container_of( |
| op->drive_gf, struct ahci_port_s, drive); |
| struct ahci_cmd_s *cmd = port_gf->cmd; |
| |
| if (op->command == CMD_WRITE || op->command == CMD_FORMAT) |
| return DISK_RET_EWRITEPROTECT; |
| int blocksize = scsi_fill_cmd(op, cmd->atapi, CDROM_CDB_SIZE); |
| if (blocksize < 0) |
| return default_process_op(op); |
| sata_prep_atapi(&cmd->fis, blocksize); |
| int rc = ahci_command(port_gf, 0, 1, op->buf_fl, op->count * blocksize); |
| if (rc < 0) |
| return DISK_RET_EBADTRACK; |
| return DISK_RET_SUCCESS; |
| } |
| |
| // read/write count blocks from a harddrive, op->buf_fl must be word aligned |
| static int |
| ahci_disk_readwrite_aligned(struct disk_op_s *op, int iswrite) |
| { |
| struct ahci_port_s *port_gf = container_of( |
| op->drive_gf, struct ahci_port_s, drive); |
| struct ahci_cmd_s *cmd = port_gf->cmd; |
| int rc; |
| |
| sata_prep_readwrite(&cmd->fis, op, iswrite); |
| rc = ahci_command(port_gf, iswrite, 0, op->buf_fl, |
| op->count * DISK_SECTOR_SIZE); |
| dprintf(8, "ahci disk %s, lba %6x, count %3x, buf %p, rc %d\n", |
| iswrite ? "write" : "read", (u32)op->lba, op->count, op->buf_fl, rc); |
| if (rc < 0) |
| return DISK_RET_EBADTRACK; |
| return DISK_RET_SUCCESS; |
| } |
| |
| // read/write count blocks from a harddrive. |
| static int |
| ahci_disk_readwrite(struct disk_op_s *op, int iswrite) |
| { |
| // if caller's buffer is word aligned, use it directly |
| if (((u32) op->buf_fl & 1) == 0) |
| return ahci_disk_readwrite_aligned(op, iswrite); |
| |
| // Use a word aligned buffer for AHCI I/O |
| int rc; |
| struct disk_op_s localop = *op; |
| u8 *alignedbuf_fl = bounce_buf_fl; |
| u8 *position = op->buf_fl; |
| |
| localop.buf_fl = alignedbuf_fl; |
| localop.count = 1; |
| |
| if (iswrite) { |
| u16 block; |
| for (block = 0; block < op->count; block++) { |
| memcpy_fl (alignedbuf_fl, position, DISK_SECTOR_SIZE); |
| rc = ahci_disk_readwrite_aligned (&localop, 1); |
| if (rc) |
| return rc; |
| position += DISK_SECTOR_SIZE; |
| localop.lba++; |
| } |
| } else { // read |
| u16 block; |
| for (block = 0; block < op->count; block++) { |
| rc = ahci_disk_readwrite_aligned (&localop, 0); |
| if (rc) |
| return rc; |
| memcpy_fl (position, alignedbuf_fl, DISK_SECTOR_SIZE); |
| position += DISK_SECTOR_SIZE; |
| localop.lba++; |
| } |
| } |
| return DISK_RET_SUCCESS; |
| } |
| |
| // command demuxer |
| int |
| ahci_process_op(struct disk_op_s *op) |
| { |
| if (!CONFIG_AHCI) |
| return 0; |
| switch (op->command) { |
| case CMD_READ: |
| return ahci_disk_readwrite(op, 0); |
| case CMD_WRITE: |
| return ahci_disk_readwrite(op, 1); |
| default: |
| return default_process_op(op); |
| } |
| } |
| |
| static void |
| ahci_port_reset(struct ahci_ctrl_s *ctrl, u32 pnr) |
| { |
| u32 val; |
| |
| /* disable FIS + CMD */ |
| u32 end = timer_calc(AHCI_RESET_TIMEOUT); |
| for (;;) { |
| val = ahci_port_readl(ctrl, pnr, PORT_CMD); |
| if (!(val & (PORT_CMD_FIS_RX | PORT_CMD_START | |
| PORT_CMD_FIS_ON | PORT_CMD_LIST_ON))) |
| break; |
| val &= ~(PORT_CMD_FIS_RX | PORT_CMD_START); |
| ahci_port_writel(ctrl, pnr, PORT_CMD, val); |
| if (timer_check(end)) { |
| warn_timeout(); |
| break; |
| } |
| yield(); |
| } |
| |
| /* disable + clear IRQs */ |
| ahci_port_writel(ctrl, pnr, PORT_IRQ_MASK, 0); |
| val = ahci_port_readl(ctrl, pnr, PORT_IRQ_STAT); |
| if (val) |
| ahci_port_writel(ctrl, pnr, PORT_IRQ_STAT, val); |
| } |
| |
| static struct ahci_port_s* |
| ahci_port_alloc(struct ahci_ctrl_s *ctrl, u32 pnr) |
| { |
| struct ahci_port_s *port = malloc_tmp(sizeof(*port)); |
| |
| if (!port) { |
| warn_noalloc(); |
| return NULL; |
| } |
| port->pnr = pnr; |
| port->ctrl = ctrl; |
| port->list = memalign_tmp(1024, 1024); |
| port->fis = memalign_tmp(256, 256); |
| port->cmd = memalign_tmp(256, 256); |
| if (port->list == NULL || port->fis == NULL || port->cmd == NULL) { |
| warn_noalloc(); |
| return NULL; |
| } |
| memset(port->list, 0, 1024); |
| memset(port->fis, 0, 256); |
| memset(port->cmd, 0, 256); |
| |
| ahci_port_writel(ctrl, pnr, PORT_LST_ADDR, (u32)port->list); |
| ahci_port_writel(ctrl, pnr, PORT_FIS_ADDR, (u32)port->fis); |
| return port; |
| } |
| |
| static void ahci_port_release(struct ahci_port_s *port) |
| { |
| ahci_port_reset(port->ctrl, port->pnr); |
| free(port->list); |
| free(port->fis); |
| free(port->cmd); |
| free(port); |
| } |
| |
| static struct ahci_port_s* ahci_port_realloc(struct ahci_port_s *port) |
| { |
| struct ahci_port_s *tmp; |
| u32 cmd; |
| |
| tmp = malloc_fseg(sizeof(*port)); |
| if (!tmp) { |
| warn_noalloc(); |
| ahci_port_release(port); |
| return NULL; |
| } |
| *tmp = *port; |
| free(port); |
| port = tmp; |
| |
| ahci_port_reset(port->ctrl, port->pnr); |
| |
| free(port->list); |
| free(port->fis); |
| free(port->cmd); |
| port->list = memalign_high(1024, 1024); |
| port->fis = memalign_high(256, 256); |
| port->cmd = memalign_high(256, 256); |
| if (!port->list || !port->fis || !port->cmd) { |
| warn_noalloc(); |
| free(port->list); |
| free(port->fis); |
| free(port->cmd); |
| free(port); |
| return NULL; |
| } |
| |
| ahci_port_writel(port->ctrl, port->pnr, PORT_LST_ADDR, (u32)port->list); |
| ahci_port_writel(port->ctrl, port->pnr, PORT_FIS_ADDR, (u32)port->fis); |
| |
| cmd = ahci_port_readl(port->ctrl, port->pnr, PORT_CMD); |
| cmd |= (PORT_CMD_FIS_RX|PORT_CMD_START); |
| ahci_port_writel(port->ctrl, port->pnr, PORT_CMD, cmd); |
| |
| return port; |
| } |
| |
| #define MAXMODEL 40 |
| |
| /* See ahci spec chapter 10.1 "Software Initialization of HBA" */ |
| static int ahci_port_setup(struct ahci_port_s *port) |
| { |
| struct ahci_ctrl_s *ctrl = port->ctrl; |
| u32 pnr = port->pnr; |
| char model[MAXMODEL+1]; |
| u16 buffer[256]; |
| u32 cmd, stat, err, tf; |
| int rc; |
| |
| /* enable FIS recv */ |
| cmd = ahci_port_readl(ctrl, pnr, PORT_CMD); |
| cmd |= PORT_CMD_FIS_RX; |
| ahci_port_writel(ctrl, pnr, PORT_CMD, cmd); |
| |
| /* spin up */ |
| cmd |= PORT_CMD_SPIN_UP; |
| ahci_port_writel(ctrl, pnr, PORT_CMD, cmd); |
| u32 end = timer_calc(AHCI_LINK_TIMEOUT); |
| for (;;) { |
| stat = ahci_port_readl(ctrl, pnr, PORT_SCR_STAT); |
| if ((stat & 0x07) == 0x03) { |
| dprintf(2, "AHCI/%d: link up\n", port->pnr); |
| break; |
| } |
| if (timer_check(end)) { |
| dprintf(2, "AHCI/%d: link down\n", port->pnr); |
| return -1; |
| } |
| yield(); |
| } |
| |
| /* clear error status */ |
| err = ahci_port_readl(ctrl, pnr, PORT_SCR_ERR); |
| if (err) |
| ahci_port_writel(ctrl, pnr, PORT_SCR_ERR, err); |
| |
| /* wait for device becoming ready */ |
| end = timer_calc(AHCI_REQUEST_TIMEOUT); |
| for (;;) { |
| tf = ahci_port_readl(ctrl, pnr, PORT_TFDATA); |
| if (!(tf & (ATA_CB_STAT_BSY | |
| ATA_CB_STAT_DRQ))) |
| break; |
| if (timer_check(end)) { |
| warn_timeout(); |
| dprintf(1, "AHCI/%d: device not ready (tf 0x%x)\n", port->pnr, tf); |
| return -1; |
| } |
| yield(); |
| } |
| |
| /* start device */ |
| cmd |= PORT_CMD_START; |
| ahci_port_writel(ctrl, pnr, PORT_CMD, cmd); |
| |
| sata_prep_simple(&port->cmd->fis, ATA_CMD_IDENTIFY_PACKET_DEVICE); |
| rc = ahci_command(port, 0, 0, buffer, sizeof(buffer)); |
| if (rc == 0) { |
| port->atapi = 1; |
| } else { |
| port->atapi = 0; |
| sata_prep_simple(&port->cmd->fis, ATA_CMD_IDENTIFY_DEVICE); |
| rc = ahci_command(port, 0, 0, buffer, sizeof(buffer)); |
| if (rc < 0) |
| return -1; |
| } |
| |
| port->drive.cntl_id = pnr; |
| port->drive.removable = (buffer[0] & 0x80) ? 1 : 0; |
| |
| if (!port->atapi) { |
| // found disk (ata) |
| port->drive.type = DTYPE_AHCI; |
| port->drive.blksize = DISK_SECTOR_SIZE; |
| port->drive.pchs.cylinder = buffer[1]; |
| port->drive.pchs.head = buffer[3]; |
| port->drive.pchs.sector = buffer[6]; |
| |
| u64 sectors; |
| if (buffer[83] & (1 << 10)) // word 83 - lba48 support |
| sectors = *(u64*)&buffer[100]; // word 100-103 |
| else |
| sectors = *(u32*)&buffer[60]; // word 60 and word 61 |
| port->drive.sectors = sectors; |
| u64 adjsize = sectors >> 11; |
| char adjprefix = 'M'; |
| if (adjsize >= (1 << 16)) { |
| adjsize >>= 10; |
| adjprefix = 'G'; |
| } |
| port->desc = znprintf(MAXDESCSIZE |
| , "AHCI/%d: %s ATA-%d Hard-Disk (%u %ciBytes)" |
| , port->pnr |
| , ata_extract_model(model, MAXMODEL, buffer) |
| , ata_extract_version(buffer) |
| , (u32)adjsize, adjprefix); |
| port->prio = bootprio_find_ata_device(ctrl->pci_tmp, pnr, 0); |
| } else { |
| // found cdrom (atapi) |
| port->drive.type = DTYPE_AHCI_ATAPI; |
| port->drive.blksize = CDROM_SECTOR_SIZE; |
| port->drive.sectors = (u64)-1; |
| u8 iscd = ((buffer[0] >> 8) & 0x1f) == 0x05; |
| if (!iscd) { |
| dprintf(1, "AHCI/%d: atapi device isn't a cdrom\n", port->pnr); |
| return -1; |
| } |
| port->desc = znprintf(MAXDESCSIZE |
| , "DVD/CD [AHCI/%d: %s ATAPI-%d DVD/CD]" |
| , port->pnr |
| , ata_extract_model(model, MAXMODEL, buffer) |
| , ata_extract_version(buffer)); |
| port->prio = bootprio_find_ata_device(ctrl->pci_tmp, pnr, 0); |
| } |
| return 0; |
| } |
| |
| // Detect any drives attached to a given controller. |
| static void |
| ahci_port_detect(void *data) |
| { |
| struct ahci_port_s *port = data; |
| int rc; |
| |
| dprintf(2, "AHCI/%d: probing\n", port->pnr); |
| ahci_port_reset(port->ctrl, port->pnr); |
| rc = ahci_port_setup(port); |
| if (rc < 0) |
| ahci_port_release(port); |
| else { |
| port = ahci_port_realloc(port); |
| if (port == NULL) |
| return; |
| dprintf(1, "AHCI/%d: registering: \"%s\"\n", port->pnr, port->desc); |
| if (!port->atapi) { |
| // Register with bcv system. |
| boot_add_hd(&port->drive, port->desc, port->prio); |
| } else { |
| // fill cdidmap |
| boot_add_cd(&port->drive, port->desc, port->prio); |
| } |
| } |
| } |
| |
| // Initialize an ata controller and detect its drives. |
| static void |
| ahci_controller_setup(struct pci_device *pci) |
| { |
| struct ahci_ctrl_s *ctrl = malloc_fseg(sizeof(*ctrl)); |
| struct ahci_port_s *port; |
| u16 bdf = pci->bdf; |
| u32 val, pnr, max; |
| |
| if (!ctrl) { |
| warn_noalloc(); |
| return; |
| } |
| |
| if (create_bounce_buf() < 0) { |
| warn_noalloc(); |
| free(ctrl); |
| return; |
| } |
| |
| ctrl->pci_tmp = pci; |
| ctrl->pci_bdf = bdf; |
| ctrl->iobase = pci_config_readl(bdf, PCI_BASE_ADDRESS_5); |
| ctrl->irq = pci_config_readb(bdf, PCI_INTERRUPT_LINE); |
| dprintf(1, "AHCI controller at %02x.%x, iobase %x, irq %d\n", |
| bdf >> 3, bdf & 7, ctrl->iobase, ctrl->irq); |
| |
| pci_config_maskw(bdf, PCI_COMMAND, 0, |
| PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); |
| |
| val = ahci_ctrl_readl(ctrl, HOST_CTL); |
| ahci_ctrl_writel(ctrl, HOST_CTL, val | HOST_CTL_AHCI_EN); |
| |
| ctrl->caps = ahci_ctrl_readl(ctrl, HOST_CAP); |
| ctrl->ports = ahci_ctrl_readl(ctrl, HOST_PORTS_IMPL); |
| dprintf(2, "AHCI: cap 0x%x, ports_impl 0x%x\n", |
| ctrl->caps, ctrl->ports); |
| |
| max = 0x1f; |
| for (pnr = 0; pnr <= max; pnr++) { |
| if (!(ctrl->ports & (1 << pnr))) |
| continue; |
| port = ahci_port_alloc(ctrl, pnr); |
| if (port == NULL) |
| continue; |
| run_thread(ahci_port_detect, port); |
| } |
| } |
| |
| // Locate and init ahci controllers. |
| static void |
| ahci_scan(void) |
| { |
| // Scan PCI bus for ATA adapters |
| struct pci_device *pci; |
| foreachpci(pci) { |
| if (pci->class != PCI_CLASS_STORAGE_SATA) |
| continue; |
| if (pci->prog_if != 1 /* AHCI rev 1 */) |
| continue; |
| ahci_controller_setup(pci); |
| } |
| } |
| |
| void |
| ahci_setup(void) |
| { |
| ASSERT32FLAT(); |
| if (!CONFIG_AHCI) |
| return; |
| |
| dprintf(3, "init ahci\n"); |
| ahci_scan(); |
| } |