| // Rom layout and bios assembler to C interface. |
| // |
| // Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> |
| // Copyright (C) 2002 MandrakeSoft S.A. |
| // |
| // This file may be distributed under the terms of the GNU LGPLv3 license. |
| |
| |
| /**************************************************************** |
| * Include of 16bit C code |
| ****************************************************************/ |
| |
| .code16gcc |
| .include "out/ccode.16.s" |
| |
| #include "config.h" // CONFIG_* |
| #include "ioport.h" // PORT_A20 |
| #include "bregs.h" // CR0_* |
| #include "cmos.h" // CMOS_RESET_CODE |
| #include "../out/asm-offsets.h" // BREGS_* |
| #include "entryfuncs.S" // ENTRY_* |
| |
| |
| /**************************************************************** |
| * Call trampolines |
| ****************************************************************/ |
| |
| // Place CPU into 32bit mode from 16bit mode. |
| // Clobbers: ecx, flags, segment registers, cr0, idt/gdt |
| DECLFUNC transition32 |
| transition32: |
| movl %eax, %ecx |
| |
| // Disable irqs (and clear direction flag) |
| cli |
| cld |
| |
| // Disable nmi |
| movl $CMOS_RESET_CODE|NMI_DISABLE_BIT, %eax |
| outb %al, $PORT_CMOS_INDEX |
| inb $PORT_CMOS_DATA, %al |
| |
| // enable a20 |
| inb $PORT_A20, %al |
| orb $A20_ENABLE_BIT, %al |
| outb %al, $PORT_A20 |
| |
| // Set segment descriptors |
| lidtw %cs:pmode_IDT_info |
| lgdtw %cs:rombios32_gdt_48 |
| |
| // Enable protected mode |
| movl %cr0, %eax |
| orl $CR0_PE, %eax |
| movl %eax, %cr0 |
| |
| // start 32bit protected mode code |
| ljmpl $SEG32_MODE32_CS, $(BUILD_BIOS_ADDR + 1f) |
| |
| .code32 |
| 1: |
| // init data segments |
| movl $SEG32_MODE32_DS, %eax |
| movw %ax, %ds |
| movw %ax, %es |
| movw %ax, %ss |
| movw %ax, %fs |
| movw %ax, %gs |
| |
| movl %ecx, %eax |
| retl |
| |
| // Place CPU into 16bit mode from 32bit mode. |
| // Clobbers: ecx, flags, segment registers, cr0, idt/gdt |
| DECLFUNC transition16 |
| .global transition16big |
| transition16: |
| movl %eax, %ecx |
| |
| // restore data segment limits to 0xffff |
| movl $SEG32_MODE16_DS, %eax |
| movw %ax, %ds |
| movw %ax, %es |
| movw %ax, %ss |
| movw %ax, %fs |
| movw %ax, %gs |
| |
| #if CONFIG_DISABLE_A20 |
| // disable a20 |
| inb $PORT_A20, %al |
| andb $~A20_ENABLE_BIT, %al |
| outb %al, $PORT_A20 |
| #endif |
| |
| // Jump to 16bit mode |
| ljmpw $SEG32_MODE16_CS, $1f |
| |
| transition16big: |
| movl %eax, %ecx |
| |
| movl $SEG32_MODE16BIG_DS, %eax |
| movw %ax, %ds |
| movw %ax, %es |
| movw %ax, %ss |
| movw %ax, %fs |
| movw %ax, %gs |
| |
| ljmpl $SEG32_MODE16BIG_CS, $(BUILD_BIOS_ADDR + 1f) |
| |
| .code16gcc |
| 1: |
| // Disable protected mode |
| movl %cr0, %eax |
| andl $~CR0_PE, %eax |
| movl %eax, %cr0 |
| |
| // far jump to flush CPU queue after transition to real mode |
| ljmpw $SEG_BIOS, $2f |
| |
| 2: |
| // restore IDT to normal real-mode defaults |
| lidtw %cs:rmode_IDT_info |
| |
| // Clear segment registers |
| xorw %ax, %ax |
| movw %ax, %fs |
| movw %ax, %gs |
| movw %ax, %es |
| movw %ax, %ds |
| movw %ax, %ss // Assume stack is in segment 0 |
| |
| movl %ecx, %eax |
| retl |
| |
| // Call a 16bit function from 16bit mode with a specified cpu register state |
| // %eax = address of struct bregs |
| // Clobbers: %e[bcd]x, %e[ds]i, flags |
| DECLFUNC __call16 |
| __call16: |
| // Save %eax, %ebp |
| pushl %ebp |
| pushl %eax |
| |
| // Setup for iretw call |
| pushw %cs |
| pushw $1f // return point |
| pushw BREGS_flags(%eax) // flags |
| pushl BREGS_code(%eax) // CS:IP |
| |
| // Load calling registers. |
| movl BREGS_edi(%eax), %edi |
| movl BREGS_esi(%eax), %esi |
| movl BREGS_ebp(%eax), %ebp |
| movl BREGS_ebx(%eax), %ebx |
| movl BREGS_edx(%eax), %edx |
| movl BREGS_ecx(%eax), %ecx |
| movw BREGS_es(%eax), %es |
| movw BREGS_ds(%eax), %ds |
| movl %ss:BREGS_eax(%eax), %eax |
| |
| // Invoke call |
| iretw // XXX - just do a lcalll |
| 1: |
| // Store flags, eax, ecx |
| pushfw |
| pushl %eax |
| movl 0x06(%esp), %eax |
| movl %ecx, %ss:BREGS_ecx(%eax) |
| movw %ds, %ss:BREGS_ds(%eax) |
| movw %ss, %cx |
| movw %cx, %ds // Restore %ds == %ss |
| popl %ecx |
| movl %ecx, BREGS_eax(%eax) |
| popw %cx |
| movw %cx, BREGS_flags(%eax) |
| |
| // Store remaining registers |
| movw %es, BREGS_es(%eax) |
| movl %edi, BREGS_edi(%eax) |
| movl %esi, BREGS_esi(%eax) |
| movl %ebp, BREGS_ebp(%eax) |
| movl %ebx, BREGS_ebx(%eax) |
| movl %edx, BREGS_edx(%eax) |
| |
| // Remove %eax, restore %ebp |
| popl %eax |
| popl %ebp |
| |
| retl |
| |
| // Call a 16bit function from 32bit mode. |
| // %eax = address of struct bregs |
| // Clobbers: %e[bcd]x, %e[ds]i, flags, segment registers, idt/gdt |
| DECLFUNC __call16_from32 |
| .global __call16big_from32 |
| .code32 |
| __call16_from32: |
| pushl $1f |
| jmp transition16 |
| __call16big_from32: |
| pushl $1f |
| jmp transition16big |
| |
| // Make call. |
| .code16gcc |
| 1: calll __call16 |
| // Return via transition32 |
| jmp transition32 |
| |
| // IRQ trampolines |
| .macro IRQ_TRAMPOLINE num |
| DECLFUNC irq_trampoline_0x\num |
| irq_trampoline_0x\num : |
| int $0x\num |
| lretw |
| .endm |
| |
| IRQ_TRAMPOLINE 10 |
| IRQ_TRAMPOLINE 13 |
| IRQ_TRAMPOLINE 15 |
| IRQ_TRAMPOLINE 16 |
| IRQ_TRAMPOLINE 18 |
| IRQ_TRAMPOLINE 19 |
| |
| |
| /**************************************************************** |
| * POST entry point |
| ****************************************************************/ |
| |
| DECLFUNC entry_post |
| entry_post: |
| // Enable cache |
| movl %cr0, %eax |
| andl $~(CR0_CD|CR0_NW), %eax |
| movl %eax, %cr0 |
| |
| // Disable interrupts |
| cli |
| cld |
| |
| // Check for restart indicator. |
| movl $CMOS_RESET_CODE|NMI_DISABLE_BIT, %eax |
| outb %al, $PORT_CMOS_INDEX |
| inb $PORT_CMOS_DATA, %al |
| cmpb $0x0, %al |
| jnz 1f |
| |
| // Normal entry point |
| ENTRY_INTO32 _start |
| |
| // Entry point when a post call looks like a resume. |
| 1: |
| // Save old shutdown status. |
| movl %eax, %ebx |
| |
| // Clear shutdown status register. |
| movl $CMOS_RESET_CODE|NMI_DISABLE_BIT, %eax |
| outb %al, $PORT_CMOS_INDEX |
| xorl %eax, %eax |
| outb %al, $PORT_CMOS_DATA |
| |
| // Use a stack in EBDA |
| movw $SEG_BDA, %ax |
| movw %ax, %ds |
| movw BDA_ebda_seg, %ax |
| |
| cmpw $EBDA_SEGMENT_START, %ax |
| jle 2f |
| // EBDA segment doesn't look valid - use startup value. |
| movw $EBDA_SEGMENT_START, %ax |
| |
| 2: movw %ax, %ds |
| movw %ax, %ss |
| movl $EBDA_OFFSET_TOP_STACK, %esp |
| |
| // Call handler. |
| movl %ebx, %eax |
| jmp handle_resume |
| |
| |
| /**************************************************************** |
| * Misc. entry points. |
| ****************************************************************/ |
| |
| // PMM entry point |
| DECLFUNC entry_pmm |
| entry_pmm: |
| pushl %esp // Backup %esp, then clear high bits |
| movzwl %sp, %esp |
| pushfl // Save registers clobbered by C code |
| cli |
| cld |
| pushl %eax |
| pushl %ecx |
| pushl %edx |
| pushw %es |
| pushw %ds |
| movw %ss, %cx // Move %ss to %ds |
| movw %cx, %ds |
| leal 28(%esp), %eax // %eax points to start of args |
| calll handle_pmm |
| movw %ax, 12(%esp) // Modify %ax:%dx to return %eax |
| shrl $16, %eax |
| movw %ax, 4(%esp) |
| popw %ds // Restore saved registers |
| popw %es |
| popl %edx |
| popl %ecx |
| popl %eax |
| popfl |
| popl %esp |
| lretw |
| |
| // PnP entry points |
| DECLFUNC entry_pnp_real |
| .global entry_pnp_prot |
| entry_pnp_prot: |
| pushl %esp |
| jmp 1f |
| entry_pnp_real: |
| pushl %esp // Backup %esp, then clear high bits |
| movzwl %sp, %esp |
| 1: |
| pushfl // Save registers clobbered by C code |
| cli |
| cld |
| pushl %eax |
| pushl %ecx |
| pushl %edx |
| pushw %es |
| pushw %ds |
| movw %ss, %cx // Move %ss to %ds |
| movw %cx, %ds |
| leal 28(%esp), %eax // %eax points to start of u16 args |
| calll handle_pnp |
| movw %ax, 12(%esp) // Modify %eax to return %ax |
| popw %ds |
| popw %es |
| popl %edx |
| popl %ecx |
| popl %eax |
| popfl |
| popl %esp |
| lretw |
| |
| // APM entry points |
| DECLFUNC apm16protected_entry |
| apm16protected_entry: |
| pushfw // save flags |
| pushl %eax // dummy |
| ENTRY_ARG handle_apm16 |
| addw $4, %sp // pop dummy |
| popfw // restore flags |
| lretw |
| |
| .code32 |
| DECLFUNC apm32protected_entry |
| apm32protected_entry: |
| pushfl |
| pushl %gs |
| pushl %cs // Move second descriptor after %cs to %gs |
| addl $16, (%esp) |
| popl %gs |
| ENTRY_ARG_ESP handle_apm32 |
| popl %gs |
| popfl |
| lretl |
| |
| // PCI-BIOS 32bit entry point |
| DECLFUNC pcibios32_entry |
| pcibios32_entry: |
| pushfl |
| pushl %gs // Backup %gs and set %gs=%ds |
| pushl %ds |
| popl %gs |
| ENTRY_ARG_ESP handle_pcibios32 |
| popl %gs |
| popfl |
| lretl |
| |
| // BIOS32 support |
| EXPORTFUNC bios32_entry |
| bios32_entry: |
| pushfl |
| #if CONFIG_PCIBIOS |
| // Check for PCI-BIOS request |
| cmpl $0x49435024, %eax // $PCI |
| jne 1f |
| movl $BUILD_BIOS_ADDR, %ebx |
| movl $BUILD_BIOS_SIZE, %ecx |
| movl $pcibios32_entry, %edx |
| xorb %al, %al |
| jmp 2f |
| #endif |
| // Unknown request |
| 1: movb $0x80, %al |
| // Return to caller |
| 2: popfl |
| lretl |
| |
| // 32bit elf entry point |
| EXPORTFUNC post32 |
| post32: |
| cli |
| cld |
| lidtl (BUILD_BIOS_ADDR + pmode_IDT_info) |
| lgdtl (BUILD_BIOS_ADDR + rombios32_gdt_48) |
| movl $SEG32_MODE32_DS, %eax |
| movw %ax, %ds |
| movw %ax, %es |
| movw %ax, %fs |
| movw %ax, %gs |
| movw %ax, %ss |
| movl $BUILD_STACK_ADDR, %esp |
| ljmpl $SEG32_MODE32_CS, $_start |
| |
| .code16gcc |
| |
| |
| /**************************************************************** |
| * Interrupt entry points |
| ****************************************************************/ |
| |
| // Define an entry point for an interrupt (no args passed). |
| .macro IRQ_ENTRY num |
| .global entry_\num |
| entry_\num : |
| pushl $ handle_\num |
| jmp irqentry |
| .endm |
| |
| // Define an entry point for an interrupt (can read/modify args). |
| .macro IRQ_ENTRY_ARG num |
| .global entry_\num |
| entry_\num : |
| pushl $ handle_\num |
| jmp irqentryarg |
| .endm |
| |
| // Macros that put each handler into its own section |
| .macro DECL_IRQ_ENTRY num |
| DECLFUNC entry_\num |
| IRQ_ENTRY \num |
| .endm |
| .macro DECL_IRQ_ENTRY_ARG num |
| DECLFUNC entry_\num |
| IRQ_ENTRY_ARG \num |
| .endm |
| |
| // Main entry point for interrupts without args |
| DECLFUNC irqentry |
| irqentry: |
| ENTRY_ST |
| iretw |
| |
| // Main entry point for interrupts with args |
| DECLFUNC irqentryarg |
| irqentryarg: |
| ENTRY_ARG_ST |
| iretw |
| |
| DECL_IRQ_ENTRY_ARG 13 |
| DECL_IRQ_ENTRY 76 |
| DECL_IRQ_ENTRY 70 |
| DECL_IRQ_ENTRY 74 |
| DECL_IRQ_ENTRY 75 |
| DECL_IRQ_ENTRY hwpic1 |
| DECL_IRQ_ENTRY hwpic2 |
| |
| // int 18/19 are special - they reset stack and call into 32bit mode. |
| DECLFUNC entry_19 |
| entry_19: |
| ENTRY_INTO32 handle_19 |
| |
| DECLFUNC entry_18 |
| entry_18: |
| ENTRY_INTO32 handle_18 |
| |
| |
| /**************************************************************** |
| * Fixed position entry points |
| ****************************************************************/ |
| |
| // Specify a location in the fixed part of bios area. |
| .macro ORG addr |
| .section .fixedaddr.\addr |
| .endm |
| |
| ORG 0xe05b |
| entry_post_official: |
| jmp entry_post |
| |
| ORG 0xe2c3 |
| IRQ_ENTRY 02 |
| |
| ORG 0xe3fe |
| .global entry_13_official |
| entry_13_official: |
| jmp entry_13 |
| |
| // 0xe401 - OldFDPT in disk.c |
| |
| ORG 0xe6f2 |
| .global entry_19_official |
| entry_19_official: |
| jmp entry_19 |
| |
| // 0xe6f5 - BIOS_CONFIG_TABLE in misc.c |
| |
| // 0xe729 - BaudTable in serial.c |
| |
| ORG 0xe739 |
| IRQ_ENTRY_ARG 14 |
| |
| ORG 0xe82e |
| IRQ_ENTRY_ARG 16 |
| |
| ORG 0xe987 |
| IRQ_ENTRY 09 |
| |
| ORG 0xec59 |
| IRQ_ENTRY_ARG 40 |
| |
| ORG 0xef57 |
| IRQ_ENTRY 0e |
| |
| // 0xefc7 - diskette_param_table in floppy.c |
| |
| ORG 0xefd2 |
| IRQ_ENTRY_ARG 17 |
| |
| ORG 0xf045 |
| entry_10_0x0f: |
| // XXX - INT 10 Functions 0-Fh Entry Point |
| iretw |
| |
| ORG 0xf065 |
| IRQ_ENTRY_ARG 10 |
| |
| // 0xf0a4 - VideoParams in misc.c |
| |
| ORG 0xf841 |
| IRQ_ENTRY_ARG 12 |
| |
| ORG 0xf84d |
| IRQ_ENTRY_ARG 11 |
| |
| ORG 0xf859 |
| IRQ_ENTRY_ARG 15 |
| |
| // 0xfa6e - vgafont8 in font.c |
| |
| ORG 0xfe6e |
| IRQ_ENTRY_ARG 1a |
| |
| ORG 0xfea5 |
| IRQ_ENTRY 08 |
| |
| // 0xfef3 - InitVectors in misc.c |
| |
| // 0xff00 - BiosCopyright in misc.c |
| |
| ORG 0xff53 |
| .global entry_iret_official |
| entry_iret_official: |
| iretw |
| |
| ORG 0xff54 |
| IRQ_ENTRY_ARG 05 |
| |
| ORG 0xfff0 // Power-up Entry Point |
| .global reset_vector |
| reset_vector: |
| ljmpw $SEG_BIOS, $entry_post_official |
| |
| // 0xfff5 - BiosDate in misc.c |
| |
| // 0xfffe - BiosModelId in misc.c |
| |
| // 0xffff - BiosChecksum in misc.c |
| |
| .end |