| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| // Configuration definitions. |
| |
| //#define CONFIG_APPNAME "QEMU" |
| //#define CONFIG_CPUNAME8 "QEMUCPU " |
| //#define CONFIG_APPNAME6 "QEMU " |
| //#define CONFIG_APPNAME4 "QEMU" |
| #define CONFIG_APPNAME "Bochs" |
| #define CONFIG_CPUNAME8 "BOCHSCPU" |
| #define CONFIG_APPNAME6 "BOCHS " |
| #define CONFIG_APPNAME4 "BXPC" |
| |
| // Configure for use with KVM. |
| #define CONFIG_KVM 0 |
| // Configure as a coreboot payload. |
| #define CONFIG_COREBOOT 0 |
| |
| // Control how verbose debug output is. |
| #define CONFIG_DEBUG_LEVEL 1 |
| // Send debugging information to serial port |
| #define CONFIG_DEBUG_SERIAL 0 |
| // Screen writes are also sent to debug ports. |
| #define CONFIG_SCREEN_AND_DEBUG 1 |
| |
| // Support int13 disk/floppy drive functions |
| #define CONFIG_DRIVES 1 |
| // Support floppy drive access |
| #define CONFIG_FLOPPY 1 |
| // Support USB devices |
| #define CONFIG_USB 1 |
| // Support USB UHCI controllers |
| #define CONFIG_USB_UHCI 1 |
| // Support USB keyboards |
| #define CONFIG_USB_KEYBOARD 1 |
| // Support for IDE disk code |
| #define CONFIG_ATA 1 |
| // Use 32bit PIO accesses on ATA (minor optimization on PCI transfers) |
| #define CONFIG_ATA_PIO32 0 |
| // Support for booting from a CD |
| #define CONFIG_CDROM_BOOT 1 |
| // Support for emulating a boot CD as a floppy/harddrive |
| #define CONFIG_CDROM_EMU 1 |
| // Support int 1a/b1 PCI BIOS calls |
| #define CONFIG_PCIBIOS 1 |
| // Support int 15/53 APM BIOS calls |
| #define CONFIG_APMBIOS 1 |
| // Support PnP BIOS entry point. |
| #define CONFIG_PNPBIOS 1 |
| // Support Post Memory Manager (PMM) entry point. |
| #define CONFIG_PMM 1 |
| // Support int 19/18 system bootup support |
| #define CONFIG_BOOT 1 |
| // Support an interactive boot menu at end of post. |
| #define CONFIG_BOOTMENU 1 |
| // Amount of time (in ms) to wait at menu before selecting normal boot. |
| #define CONFIG_BOOTMENU_WAIT 2500 |
| // Support int 14 serial port calls |
| #define CONFIG_SERIAL 1 |
| // Support int 17 parallel port calls |
| #define CONFIG_LPT 1 |
| // Support int 16 keyboard calls |
| #define CONFIG_KEYBOARD 1 |
| // Support calling int155f on each keyboard event |
| #define CONFIG_KBD_CALL_INT15_4F 1 |
| // Disable A20 on 16bit boot |
| #define CONFIG_DISABLE_A20 0 |
| // Support for int15c2 mouse calls |
| #define CONFIG_PS2_MOUSE 1 |
| // If the target machine has multiple independent root buses, the |
| // extra buses may be specified here. |
| #define CONFIG_PCI_ROOT1 0x00 |
| #define CONFIG_PCI_ROOT2 0x00 |
| // Support searching coreboot flash format. |
| #define CONFIG_COREBOOT_FLASH 0 |
| // Support floppy images in the coreboot flash. |
| #define CONFIG_FLASH_FLOPPY 1 |
| // Support the lzma decompression algorighm. |
| #define CONFIG_LZMA 1 |
| // Support finding and running option roms during post. |
| #define CONFIG_OPTIONROMS 1 |
| // Set if option roms are already copied to 0xc0000-0xf0000 |
| #define CONFIG_OPTIONROMS_DEPLOYED 1 |
| // When option roms are not pre-deployed, SeaBIOS can copy an optionrom |
| // from flash for up to 2 devices. |
| #define OPTIONROM_VENDEV_1 0x00000000 |
| #define OPTIONROM_MEM_1 0x00000000 |
| #define OPTIONROM_VENDEV_2 0x00000000 |
| #define OPTIONROM_MEM_2 0x00000000 |
| |
| // Support generation of a PIR table in 0xf000 segment (for emulators) |
| #define CONFIG_PIRTABLE 1 |
| // Support generation of MPTable (for emulators) |
| #define CONFIG_MPTABLE 1 |
| // Support generation of SM BIOS tables (for emulators) |
| #define CONFIG_SMBIOS 1 |
| // Support finding a UUID (for smbios) via "magic" outl sequence. |
| #define CONFIG_UUID_BACKDOOR 1 |
| // Support generation of ACPI tables (for emulators) |
| #define CONFIG_ACPI 1 |
| // Support bios callbacks specific to via vgabios. |
| #define CONFIG_VGAHOOKS 0 |
| // Support S3 resume handler. |
| #define CONFIG_S3_RESUME 1 |
| // Run the vga rom during S3 resume. |
| #define CONFIG_S3_RESUME_VGA_INIT 0 |
| // define it if the (emulated) hardware supports SMM mode |
| #define CONFIG_USE_SMM 1 |
| // Maximum number of map entries in the e820 map |
| #define CONFIG_MAX_E820 32 |
| // Space to reserve in f-segment for run-time built bios tables. |
| #define CONFIG_MAX_BIOSTABLE 2048 |
| // Space to reserve in high-memory for tables |
| #define CONFIG_MAX_HIGHTABLE (64*1024) |
| |
| // Maximum number of ATA controllers to support |
| #define CONFIG_MAX_ATA_INTERFACES 4 |
| // Maximum number of internal drives supported |
| #define CONFIG_MAX_DRIVES 8 |
| // Largest supported externaly facing drive id |
| #define CONFIG_MAX_EXTDRIVE 16 |
| |
| #define CONFIG_MODEL_ID 0xFC |
| #define CONFIG_SUBMODEL_ID 0x00 |
| #define CONFIG_BIOS_REVISION 0x01 |
| |
| // Various memory addresses used by the code. |
| #define BUILD_STACK_ADDR 0x7c00 |
| #define BUILD_S3RESUME_STACK_ADDR 0x1000 |
| #define BUILD_AP_BOOT_ADDR 0x10000 |
| #define BUILD_EBDA_MINIMUM 0x90000 |
| #define BUILD_LOWRAM_END 0xa0000 |
| #define BUILD_ROM_START 0xc0000 |
| #define BUILD_BIOS_ADDR 0xf0000 |
| #define BUILD_BIOS_SIZE 0x10000 |
| // 32KB for shadow ram copying (works around emulator deficiencies) |
| #define BUILD_BIOS_TMP_ADDR 0x30000 |
| |
| #define BUILD_APIC_ADDR 0xfee00000 |
| #define BUILD_IOAPIC_ADDR 0xfec00000 |
| |
| #define BUILD_SMM_INIT_ADDR 0x38000 |
| #define BUILD_SMM_ADDR 0xa8000 |
| #define BUILD_SMM_SIZE 0x8000 |
| |
| // Important real-mode segments |
| #define SEG_IVT 0x0000 |
| #define SEG_BDA 0x0040 |
| #define SEG_BIOS 0xf000 |
| |
| // Segment definitions in protected mode (see rombios32_gdt in misc.c) |
| #define SEG32_MODE32_CS (1 << 3) |
| #define SEG32_MODE32_DS (2 << 3) |
| #define SEG32_MODE16_CS (3 << 3) |
| #define SEG32_MODE16_DS (4 << 3) |
| #define SEG32_MODE16BIG_CS (5 << 3) |
| #define SEG32_MODE16BIG_DS (6 << 3) |
| |
| // Debugging levels. If non-zero and CONFIG_DEBUG_LEVEL is greater |
| // than the specified value, then the corresponding irq handler will |
| // report every enter event. |
| #define DEBUG_ISR_02 1 |
| #define DEBUG_HDL_05 1 |
| #define DEBUG_ISR_08 20 |
| #define DEBUG_ISR_09 9 |
| #define DEBUG_ISR_0e 9 |
| #define DEBUG_HDL_10 20 |
| #define DEBUG_HDL_11 1 |
| #define DEBUG_HDL_12 1 |
| #define DEBUG_HDL_13 10 |
| #define DEBUG_HDL_14 1 |
| #define DEBUG_HDL_15 9 |
| #define DEBUG_HDL_16 9 |
| #define DEBUG_HDL_17 1 |
| #define DEBUG_HDL_18 1 |
| #define DEBUG_HDL_19 1 |
| #define DEBUG_HDL_1a 9 |
| #define DEBUG_HDL_40 1 |
| #define DEBUG_ISR_70 9 |
| #define DEBUG_ISR_74 9 |
| #define DEBUG_ISR_75 1 |
| #define DEBUG_ISR_76 10 |
| #define DEBUG_ISR_hwpic1 5 |
| #define DEBUG_ISR_hwpic2 5 |
| #define DEBUG_HDL_pnp 1 |
| #define DEBUG_HDL_pmm 1 |
| |
| #endif // config.h |