| // Low level ATA disk access |
| // |
| // Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> |
| // Copyright (C) 2002 MandrakeSoft S.A. |
| // |
| // This file may be distributed under the terms of the GNU GPLv3 license. |
| |
| #include "types.h" // u32 |
| #include "util.h" // handle_1ab1 |
| #include "pci.h" // pci_config_readl |
| |
| |
| /**************************************************************** |
| * PIR table |
| ****************************************************************/ |
| |
| struct pir { |
| u32 signature; |
| u16 version; |
| u16 size; |
| u8 router_bus; |
| u8 router_devfunc; |
| u16 exclusive_irqs; |
| u32 compatible_devid; |
| u32 miniport_data; |
| u8 reserved[11]; |
| u8 checksum; |
| } PACKED; |
| |
| struct link_info { |
| u8 link; |
| u16 bitmap; |
| } PACKED; |
| |
| struct pir_slot { |
| u8 bus; |
| u8 dev; |
| struct link_info links[4]; |
| u8 slot_nr; |
| u8 reserved; |
| } PACKED; |
| |
| struct pir_table { |
| struct pir pir; |
| struct pir_slot slots[6]; |
| } PACKED PIR_TABLE VISIBLE16 __attribute__((aligned(16))) = { |
| #if CONFIG_PIRTABLE |
| .pir = { |
| .signature = 0x52495024, // "$PIR" |
| .version = 0x0100, |
| .size = sizeof(struct pir_table), |
| .router_devfunc = 0x08, |
| .compatible_devid = 0x122e8086, |
| .checksum = 0x37, // XXX - should auto calculate |
| }, |
| .slots = { |
| { |
| // first slot entry PCI-to-ISA (embedded) |
| .dev = 1<<3, |
| .links = { |
| {.link = 0x60, .bitmap = 0xdef8}, // INTA# |
| {.link = 0x61, .bitmap = 0xdef8}, // INTB# |
| {.link = 0x62, .bitmap = 0xdef8}, // INTC# |
| {.link = 0x63, .bitmap = 0xdef8}, // INTD# |
| }, |
| .slot_nr = 0, // embedded |
| }, { |
| // second slot entry: 1st PCI slot |
| .dev = 2<<3, |
| .links = { |
| {.link = 0x61, .bitmap = 0xdef8}, // INTA# |
| {.link = 0x62, .bitmap = 0xdef8}, // INTB# |
| {.link = 0x63, .bitmap = 0xdef8}, // INTC# |
| {.link = 0x60, .bitmap = 0xdef8}, // INTD# |
| }, |
| .slot_nr = 1, |
| }, { |
| // third slot entry: 2nd PCI slot |
| .dev = 3<<3, |
| .links = { |
| {.link = 0x62, .bitmap = 0xdef8}, // INTA# |
| {.link = 0x63, .bitmap = 0xdef8}, // INTB# |
| {.link = 0x60, .bitmap = 0xdef8}, // INTC# |
| {.link = 0x61, .bitmap = 0xdef8}, // INTD# |
| }, |
| .slot_nr = 2, |
| }, { |
| // 4th slot entry: 3rd PCI slot |
| .dev = 4<<3, |
| .links = { |
| {.link = 0x63, .bitmap = 0xdef8}, // INTA# |
| {.link = 0x60, .bitmap = 0xdef8}, // INTB# |
| {.link = 0x61, .bitmap = 0xdef8}, // INTC# |
| {.link = 0x62, .bitmap = 0xdef8}, // INTD# |
| }, |
| .slot_nr = 3, |
| }, { |
| // 5th slot entry: 4rd PCI slot |
| .dev = 5<<3, |
| .links = { |
| {.link = 0x60, .bitmap = 0xdef8}, // INTA# |
| {.link = 0x61, .bitmap = 0xdef8}, // INTB# |
| {.link = 0x62, .bitmap = 0xdef8}, // INTC# |
| {.link = 0x63, .bitmap = 0xdef8}, // INTD# |
| }, |
| .slot_nr = 4, |
| }, { |
| // 6th slot entry: 5rd PCI slot |
| .dev = 6<<3, |
| .links = { |
| {.link = 0x61, .bitmap = 0xdef8}, // INTA# |
| {.link = 0x62, .bitmap = 0xdef8}, // INTB# |
| {.link = 0x63, .bitmap = 0xdef8}, // INTC# |
| {.link = 0x60, .bitmap = 0xdef8}, // INTD# |
| }, |
| .slot_nr = 5, |
| }, |
| } |
| #endif // CONFIG_PIRTABLE |
| }; |
| |
| |
| /**************************************************************** |
| * Helper functions |
| ****************************************************************/ |
| |
| #define RET_FUNC_NOT_SUPPORTED 0x81 |
| #define RET_BAD_VENDOR_ID 0x83 |
| #define RET_DEVICE_NOT_FOUND 0x86 |
| #define RET_BUFFER_TOO_SMALL 0x89 |
| |
| // installation check |
| static void |
| handle_1ab101(struct bregs *regs) |
| { |
| regs->ax = 0x0001; |
| regs->bx = 0x0210; |
| regs->cx = 0; |
| regs->edx = 0x20494350; // "PCI " |
| // XXX - bochs bios code sets edi to point to 32bit code - but no |
| // reference to this in spec. |
| set_success(regs); |
| } |
| |
| // find pci device |
| static void |
| handle_1ab102(struct bregs *regs) |
| { |
| PCIDevice d; |
| int ret = pci_find_device(regs->cx, regs->dx, regs->si, &d); |
| if (ret) { |
| set_code_fail(regs, RET_DEVICE_NOT_FOUND); |
| return; |
| } |
| regs->bh = d.bus; |
| regs->bl = d.devfn; |
| set_code_success(regs); |
| } |
| |
| // find class code |
| static void |
| handle_1ab103(struct bregs *regs) |
| { |
| PCIDevice d; |
| int ret = pci_find_class(regs->ecx, regs->si, &d); |
| if (ret) { |
| set_code_fail(regs, RET_DEVICE_NOT_FOUND); |
| return; |
| } |
| regs->bh = d.bus; |
| regs->bl = d.devfn; |
| set_code_success(regs); |
| } |
| |
| // read configuration byte |
| static void |
| handle_1ab108(struct bregs *regs) |
| { |
| regs->cl = pci_config_readb(pci_bd(regs->bh, regs->bl), regs->di); |
| set_code_success(regs); |
| } |
| |
| // read configuration word |
| static void |
| handle_1ab109(struct bregs *regs) |
| { |
| regs->cx = pci_config_readw(pci_bd(regs->bh, regs->bl), regs->di); |
| set_code_success(regs); |
| } |
| |
| // read configuration dword |
| static void |
| handle_1ab10a(struct bregs *regs) |
| { |
| regs->ecx = pci_config_readl(pci_bd(regs->bh, regs->bl), regs->di); |
| set_code_success(regs); |
| } |
| |
| // write configuration byte |
| static void |
| handle_1ab10b(struct bregs *regs) |
| { |
| pci_config_writeb(pci_bd(regs->bh, regs->bl), regs->di, regs->cl); |
| set_code_success(regs); |
| } |
| |
| // write configuration word |
| static void |
| handle_1ab10c(struct bregs *regs) |
| { |
| pci_config_writew(pci_bd(regs->bh, regs->bl), regs->di, regs->cx); |
| set_code_success(regs); |
| } |
| |
| // write configuration dword |
| static void |
| handle_1ab10d(struct bregs *regs) |
| { |
| pci_config_writel(pci_bd(regs->bh, regs->bl), regs->di, regs->ecx); |
| set_code_success(regs); |
| } |
| |
| // get irq routing options |
| static void |
| handle_1ab10e(struct bregs *regs) |
| { |
| if (! CONFIG_PIRTABLE) { |
| set_code_fail(regs, RET_FUNC_NOT_SUPPORTED); |
| return; |
| } |
| |
| // Validate and update size. |
| u16 size = GET_FARVAR(regs->es, *(u16*)(regs->di+0)); |
| u32 pirsize = sizeof(PIR_TABLE.slots); |
| SET_FARVAR(regs->es, *(u16*)(regs->di+0), pirsize); |
| if (size < pirsize) { |
| set_code_fail(regs, RET_BUFFER_TOO_SMALL); |
| return; |
| } |
| |
| // Get dest buffer. |
| u8 *d = (u8*)(GET_FARVAR(regs->es, *(u16*)(regs->di+2)) + 0); |
| u16 destseg = GET_FARVAR(regs->es, *(u16*)(regs->di+4)); |
| |
| // Memcpy pir table slots to dest buffer. |
| u8 *p = (u8*)PIR_TABLE.slots; |
| u8 *end = p + pirsize; |
| for (; p<end; p++, d++) { |
| u8 c = GET_VAR(CS, *p); |
| SET_FARVAR(destseg, *d, c); |
| } |
| |
| // XXX - bochs bios sets bx to (1 << 9) | (1 << 11) |
| regs->bx = GET_VAR(CS, PIR_TABLE.pir.exclusive_irqs); |
| set_code_success(regs); |
| } |
| |
| static void |
| handle_1ab1XX(struct bregs *regs) |
| { |
| set_code_fail(regs, RET_FUNC_NOT_SUPPORTED); |
| } |
| |
| void |
| handle_1ab1(struct bregs *regs) |
| { |
| //debug_stub(regs); |
| |
| if (! CONFIG_PCIBIOS) { |
| set_fail(regs); |
| return; |
| } |
| |
| switch (regs->al) { |
| case 0x01: handle_1ab101(regs); break; |
| case 0x02: handle_1ab102(regs); break; |
| case 0x03: handle_1ab103(regs); break; |
| case 0x08: handle_1ab108(regs); break; |
| case 0x09: handle_1ab109(regs); break; |
| case 0x0a: handle_1ab10a(regs); break; |
| case 0x0b: handle_1ab10b(regs); break; |
| case 0x0c: handle_1ab10c(regs); break; |
| case 0x0d: handle_1ab10d(regs); break; |
| case 0x0e: handle_1ab10e(regs); break; |
| default: handle_1ab1XX(regs); break; |
| } |
| } |