| // Low level ATA disk access |
| // |
| // Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> |
| // Copyright (C) 2002 MandrakeSoft S.A. |
| // |
| // This file may be distributed under the terms of the GNU LGPLv3 license. |
| |
| #include "types.h" // u8 |
| #include "ioport.h" // inb |
| #include "util.h" // dprintf |
| #include "cmos.h" // inb_cmos |
| #include "pic.h" // enable_hwirq |
| #include "biosvar.h" // GET_EBDA |
| #include "pci.h" // foreachpci |
| #include "pci_ids.h" // PCI_CLASS_STORAGE_OTHER |
| #include "pci_regs.h" // PCI_INTERRUPT_LINE |
| #include "boot.h" // boot_add_hd |
| #include "disk.h" // struct ata_s |
| #include "ata.h" // ATA_CB_STAT |
| #include "blockcmd.h" // CDB_CMD_READ_10 |
| |
| #define IDE_TIMEOUT 32000 //32 seconds max for IDE ops |
| |
| |
| /**************************************************************** |
| * Helper functions |
| ****************************************************************/ |
| |
| // Wait for the specified ide state |
| static inline int |
| await_ide(u8 mask, u8 flags, u16 base, u16 timeout) |
| { |
| u64 end = calc_future_tsc(timeout); |
| for (;;) { |
| u8 status = inb(base+ATA_CB_STAT); |
| if ((status & mask) == flags) |
| return status; |
| if (check_tsc(end)) { |
| warn_timeout(); |
| return -1; |
| } |
| yield(); |
| } |
| } |
| |
| // Wait for the device to be not-busy. |
| static int |
| await_not_bsy(u16 base) |
| { |
| return await_ide(ATA_CB_STAT_BSY, 0, base, IDE_TIMEOUT); |
| } |
| |
| // Wait for the device to be ready. |
| static int |
| await_rdy(u16 base) |
| { |
| return await_ide(ATA_CB_STAT_RDY, ATA_CB_STAT_RDY, base, IDE_TIMEOUT); |
| } |
| |
| // Wait for ide state - pauses for one ata cycle first. |
| static inline int |
| pause_await_not_bsy(u16 iobase1, u16 iobase2) |
| { |
| // Wait one PIO transfer cycle. |
| inb(iobase2 + ATA_CB_ASTAT); |
| |
| return await_not_bsy(iobase1); |
| } |
| |
| // Wait for ide state - pause for 400ns first. |
| static inline int |
| ndelay_await_not_bsy(u16 iobase1) |
| { |
| ndelay(400); |
| return await_not_bsy(iobase1); |
| } |
| |
| // Reset a drive |
| static void |
| ata_reset(struct atadrive_s *adrive_g) |
| { |
| struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf); |
| u8 slave = GET_GLOBAL(adrive_g->slave); |
| u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); |
| u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); |
| |
| dprintf(6, "ata_reset drive=%p\n", &adrive_g->drive); |
| // Pulse SRST |
| outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN | ATA_CB_DC_SRST, iobase2+ATA_CB_DC); |
| udelay(5); |
| outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2+ATA_CB_DC); |
| msleep(2); |
| |
| // wait for device to become not busy. |
| int status = await_not_bsy(iobase1); |
| if (status < 0) |
| goto done; |
| if (slave) { |
| // Change device. |
| u64 end = calc_future_tsc(IDE_TIMEOUT); |
| for (;;) { |
| outb(ATA_CB_DH_DEV1, iobase1 + ATA_CB_DH); |
| status = ndelay_await_not_bsy(iobase1); |
| if (status < 0) |
| goto done; |
| if (inb(iobase1 + ATA_CB_DH) == ATA_CB_DH_DEV1) |
| break; |
| // Change drive request failed to take effect - retry. |
| if (check_tsc(end)) { |
| warn_timeout(); |
| goto done; |
| } |
| } |
| } else { |
| // QEMU doesn't reset dh on reset, so set it explicitly. |
| outb(ATA_CB_DH_DEV0, iobase1 + ATA_CB_DH); |
| } |
| |
| // On a user-reset request, wait for RDY if it is an ATA device. |
| u8 type=GET_GLOBAL(adrive_g->drive.type); |
| if (type == DTYPE_ATA) |
| status = await_rdy(iobase1); |
| |
| done: |
| // Enable interrupts |
| outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC); |
| |
| dprintf(6, "ata_reset exit status=%x\n", status); |
| } |
| |
| // Check for drive RDY for 16bit interface command. |
| static int |
| isready(struct atadrive_s *adrive_g) |
| { |
| // Read the status from controller |
| struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf); |
| u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); |
| u8 status = inb(iobase1 + ATA_CB_STAT); |
| if ((status & (ATA_CB_STAT_BSY|ATA_CB_STAT_RDY)) == ATA_CB_STAT_RDY) |
| return DISK_RET_SUCCESS; |
| return DISK_RET_ENOTREADY; |
| } |
| |
| // Default 16bit command demuxer for ATA and ATAPI devices. |
| static int |
| process_ata_misc_op(struct disk_op_s *op) |
| { |
| if (!CONFIG_ATA) |
| return 0; |
| |
| struct atadrive_s *adrive_g = container_of( |
| op->drive_g, struct atadrive_s, drive); |
| switch (op->command) { |
| case CMD_RESET: |
| ata_reset(adrive_g); |
| return DISK_RET_SUCCESS; |
| case CMD_ISREADY: |
| return isready(adrive_g); |
| case CMD_FORMAT: |
| case CMD_VERIFY: |
| case CMD_SEEK: |
| return DISK_RET_SUCCESS; |
| default: |
| op->count = 0; |
| return DISK_RET_EPARAM; |
| } |
| } |
| |
| |
| /**************************************************************** |
| * ATA send command |
| ****************************************************************/ |
| |
| struct ata_pio_command { |
| u8 feature; |
| u8 sector_count; |
| u8 lba_low; |
| u8 lba_mid; |
| u8 lba_high; |
| u8 device; |
| u8 command; |
| |
| u8 feature2; |
| u8 sector_count2; |
| u8 lba_low2; |
| u8 lba_mid2; |
| u8 lba_high2; |
| }; |
| |
| // Send an ata command to the drive. |
| static int |
| send_cmd(struct atadrive_s *adrive_g, struct ata_pio_command *cmd) |
| { |
| struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf); |
| u8 slave = GET_GLOBAL(adrive_g->slave); |
| u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); |
| |
| // Select device |
| int status = await_not_bsy(iobase1); |
| if (status < 0) |
| return status; |
| u8 newdh = ((cmd->device & ~ATA_CB_DH_DEV1) |
| | (slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0)); |
| u8 olddh = inb(iobase1 + ATA_CB_DH); |
| outb(newdh, iobase1 + ATA_CB_DH); |
| if ((olddh ^ newdh) & (1<<4)) { |
| // Was a device change - wait for device to become not busy. |
| status = ndelay_await_not_bsy(iobase1); |
| if (status < 0) |
| return status; |
| } |
| |
| // Check for ATA_CMD_(READ|WRITE)_(SECTORS|DMA)_EXT commands. |
| if ((cmd->command & ~0x11) == ATA_CMD_READ_SECTORS_EXT) { |
| outb(cmd->feature2, iobase1 + ATA_CB_FR); |
| outb(cmd->sector_count2, iobase1 + ATA_CB_SC); |
| outb(cmd->lba_low2, iobase1 + ATA_CB_SN); |
| outb(cmd->lba_mid2, iobase1 + ATA_CB_CL); |
| outb(cmd->lba_high2, iobase1 + ATA_CB_CH); |
| } |
| outb(cmd->feature, iobase1 + ATA_CB_FR); |
| outb(cmd->sector_count, iobase1 + ATA_CB_SC); |
| outb(cmd->lba_low, iobase1 + ATA_CB_SN); |
| outb(cmd->lba_mid, iobase1 + ATA_CB_CL); |
| outb(cmd->lba_high, iobase1 + ATA_CB_CH); |
| outb(cmd->command, iobase1 + ATA_CB_CMD); |
| |
| return 0; |
| } |
| |
| // Wait for data after calling 'send_cmd'. |
| static int |
| ata_wait_data(u16 iobase1) |
| { |
| int status = ndelay_await_not_bsy(iobase1); |
| if (status < 0) |
| return status; |
| |
| if (status & ATA_CB_STAT_ERR) { |
| dprintf(6, "send_cmd : read error (status=%02x err=%02x)\n" |
| , status, inb(iobase1 + ATA_CB_ERR)); |
| return -4; |
| } |
| if (!(status & ATA_CB_STAT_DRQ)) { |
| dprintf(6, "send_cmd : DRQ not set (status %02x)\n", status); |
| return -5; |
| } |
| |
| return 0; |
| } |
| |
| // Send an ata command that does not transfer any further data. |
| int |
| ata_cmd_nondata(struct atadrive_s *adrive_g, struct ata_pio_command *cmd) |
| { |
| struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf); |
| u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); |
| u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); |
| |
| // Disable interrupts |
| outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC); |
| |
| int ret = send_cmd(adrive_g, cmd); |
| if (ret) |
| goto fail; |
| ret = ndelay_await_not_bsy(iobase1); |
| if (ret < 0) |
| goto fail; |
| |
| if (ret & ATA_CB_STAT_ERR) { |
| dprintf(6, "nondata cmd : read error (status=%02x err=%02x)\n" |
| , ret, inb(iobase1 + ATA_CB_ERR)); |
| ret = -4; |
| goto fail; |
| } |
| if (ret & ATA_CB_STAT_DRQ) { |
| dprintf(6, "nondata cmd : DRQ set (status %02x)\n", ret); |
| ret = -5; |
| goto fail; |
| } |
| |
| fail: |
| // Enable interrupts |
| outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC); |
| |
| return ret; |
| } |
| |
| |
| /**************************************************************** |
| * ATA PIO transfers |
| ****************************************************************/ |
| |
| // Transfer 'op->count' blocks (of 'blocksize' bytes) to/from drive |
| // 'op->drive_g'. |
| static int |
| ata_pio_transfer(struct disk_op_s *op, int iswrite, int blocksize) |
| { |
| dprintf(16, "ata_pio_transfer id=%p write=%d count=%d bs=%d buf=%p\n" |
| , op->drive_g, iswrite, op->count, blocksize, op->buf_fl); |
| |
| struct atadrive_s *adrive_g = container_of( |
| op->drive_g, struct atadrive_s, drive); |
| struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf); |
| u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); |
| u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); |
| int count = op->count; |
| void *buf_fl = op->buf_fl; |
| int status; |
| for (;;) { |
| if (iswrite) { |
| // Write data to controller |
| dprintf(16, "Write sector id=%p dest=%p\n", op->drive_g, buf_fl); |
| if (CONFIG_ATA_PIO32) |
| outsl_fl(iobase1, buf_fl, blocksize / 4); |
| else |
| outsw_fl(iobase1, buf_fl, blocksize / 2); |
| } else { |
| // Read data from controller |
| dprintf(16, "Read sector id=%p dest=%p\n", op->drive_g, buf_fl); |
| if (CONFIG_ATA_PIO32) |
| insl_fl(iobase1, buf_fl, blocksize / 4); |
| else |
| insw_fl(iobase1, buf_fl, blocksize / 2); |
| } |
| buf_fl += blocksize; |
| |
| status = pause_await_not_bsy(iobase1, iobase2); |
| if (status < 0) { |
| // Error |
| op->count -= count; |
| return status; |
| } |
| |
| count--; |
| if (!count) |
| break; |
| status &= (ATA_CB_STAT_BSY | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR); |
| if (status != ATA_CB_STAT_DRQ) { |
| dprintf(6, "ata_pio_transfer : more sectors left (status %02x)\n" |
| , status); |
| op->count -= count; |
| return -6; |
| } |
| } |
| |
| status &= (ATA_CB_STAT_BSY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ |
| | ATA_CB_STAT_ERR); |
| if (!iswrite) |
| status &= ~ATA_CB_STAT_DF; |
| if (status != 0) { |
| dprintf(6, "ata_pio_transfer : no sectors left (status %02x)\n", status); |
| return -7; |
| } |
| |
| return 0; |
| } |
| |
| |
| /**************************************************************** |
| * ATA DMA transfers |
| ****************************************************************/ |
| |
| #define BM_CMD 0 |
| #define BM_CMD_MEMWRITE 0x08 |
| #define BM_CMD_START 0x01 |
| #define BM_STATUS 2 |
| #define BM_STATUS_IRQ 0x04 |
| #define BM_STATUS_ERROR 0x02 |
| #define BM_STATUS_ACTIVE 0x01 |
| #define BM_TABLE 4 |
| |
| struct sff_dma_prd { |
| u32 buf_fl; |
| u32 count; |
| }; |
| |
| // Check if DMA available and setup transfer if so. |
| static int |
| ata_try_dma(struct disk_op_s *op, int iswrite, int blocksize) |
| { |
| if (! CONFIG_ATA_DMA) |
| return -1; |
| u32 dest = (u32)op->buf_fl; |
| if (dest & 1) |
| // Need minimum alignment of 1. |
| return -1; |
| struct atadrive_s *adrive_g = container_of( |
| op->drive_g, struct atadrive_s, drive); |
| struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf); |
| u16 iomaster = GET_GLOBALFLAT(chan_gf->iomaster); |
| if (! iomaster) |
| return -1; |
| u32 bytes = op->count * blocksize; |
| if (! bytes) |
| return -1; |
| |
| // Build PRD dma structure. |
| struct sff_dma_prd *dma = MAKE_FLATPTR( |
| get_ebda_seg() |
| , (void*)offsetof(struct extended_bios_data_area_s, extra_stack)); |
| struct sff_dma_prd *origdma = dma; |
| while (bytes) { |
| if (dma >= &origdma[16]) |
| // Too many descriptors.. |
| return -1; |
| u32 count = bytes; |
| u32 max = 0x10000 - (dest & 0xffff); |
| if (count > max) |
| count = max; |
| |
| SET_FLATPTR(dma->buf_fl, dest); |
| bytes -= count; |
| if (!bytes) |
| // Last descriptor. |
| count |= 1<<31; |
| dprintf(16, "dma@%p: %08x %08x\n", dma, dest, count); |
| dest += count; |
| SET_FLATPTR(dma->count, count); |
| dma++; |
| } |
| |
| // Program bus-master controller. |
| outl((u32)origdma, iomaster + BM_TABLE); |
| u8 oldcmd = inb(iomaster + BM_CMD) & ~(BM_CMD_MEMWRITE|BM_CMD_START); |
| outb(oldcmd | (iswrite ? 0x00 : BM_CMD_MEMWRITE), iomaster + BM_CMD); |
| outb(BM_STATUS_ERROR|BM_STATUS_IRQ, iomaster + BM_STATUS); |
| |
| return 0; |
| } |
| |
| // Transfer data using DMA. |
| static int |
| ata_dma_transfer(struct disk_op_s *op) |
| { |
| if (! CONFIG_ATA_DMA) |
| return -1; |
| dprintf(16, "ata_dma_transfer id=%p buf=%p\n", op->drive_g, op->buf_fl); |
| |
| struct atadrive_s *adrive_g = container_of( |
| op->drive_g, struct atadrive_s, drive); |
| struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf); |
| u16 iomaster = GET_GLOBALFLAT(chan_gf->iomaster); |
| |
| // Start bus-master controller. |
| u8 oldcmd = inb(iomaster + BM_CMD); |
| outb(oldcmd | BM_CMD_START, iomaster + BM_CMD); |
| |
| u64 end = calc_future_tsc(IDE_TIMEOUT); |
| u8 status; |
| for (;;) { |
| status = inb(iomaster + BM_STATUS); |
| if (status & BM_STATUS_IRQ) |
| break; |
| // Transfer in progress |
| if (check_tsc(end)) { |
| // Timeout. |
| warn_timeout(); |
| break; |
| } |
| yield(); |
| } |
| outb(oldcmd & ~BM_CMD_START, iomaster + BM_CMD); |
| |
| u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); |
| u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); |
| int idestatus = pause_await_not_bsy(iobase1, iobase2); |
| |
| if ((status & (BM_STATUS_IRQ|BM_STATUS_ACTIVE)) == BM_STATUS_IRQ |
| && idestatus >= 0x00 |
| && (idestatus & (ATA_CB_STAT_BSY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ |
| | ATA_CB_STAT_ERR)) == 0x00) |
| // Success. |
| return 0; |
| |
| dprintf(6, "IDE DMA error (dma=%x ide=%x/%x/%x)\n", status, idestatus |
| , inb(iobase2 + ATA_CB_ASTAT), inb(iobase1 + ATA_CB_ERR)); |
| op->count = 0; |
| return -1; |
| } |
| |
| |
| /**************************************************************** |
| * ATA hard drive functions |
| ****************************************************************/ |
| |
| // Transfer data to harddrive using PIO protocol. |
| static int |
| ata_pio_cmd_data(struct disk_op_s *op, int iswrite, struct ata_pio_command *cmd) |
| { |
| struct atadrive_s *adrive_g = container_of( |
| op->drive_g, struct atadrive_s, drive); |
| struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf); |
| u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); |
| u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); |
| |
| // Disable interrupts |
| outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC); |
| |
| int ret = send_cmd(adrive_g, cmd); |
| if (ret) |
| goto fail; |
| ret = ata_wait_data(iobase1); |
| if (ret) |
| goto fail; |
| ret = ata_pio_transfer(op, iswrite, DISK_SECTOR_SIZE); |
| |
| fail: |
| // Enable interrupts |
| outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC); |
| return ret; |
| } |
| |
| // Transfer data to harddrive using DMA protocol. |
| static int |
| ata_dma_cmd_data(struct disk_op_s *op, struct ata_pio_command *cmd) |
| { |
| if (! CONFIG_ATA_DMA) |
| return -1; |
| struct atadrive_s *adrive_g = container_of( |
| op->drive_g, struct atadrive_s, drive); |
| int ret = send_cmd(adrive_g, cmd); |
| if (ret) |
| return ret; |
| return ata_dma_transfer(op); |
| } |
| |
| // Read/write count blocks from a harddrive. |
| static int |
| ata_readwrite(struct disk_op_s *op, int iswrite) |
| { |
| u64 lba = op->lba; |
| |
| int usepio = ata_try_dma(op, iswrite, DISK_SECTOR_SIZE); |
| |
| struct ata_pio_command cmd; |
| memset(&cmd, 0, sizeof(cmd)); |
| |
| if (op->count >= (1<<8) || lba + op->count >= (1<<28)) { |
| cmd.sector_count2 = op->count >> 8; |
| cmd.lba_low2 = lba >> 24; |
| cmd.lba_mid2 = lba >> 32; |
| cmd.lba_high2 = lba >> 40; |
| lba &= 0xffffff; |
| |
| if (usepio) |
| cmd.command = (iswrite ? ATA_CMD_WRITE_SECTORS_EXT |
| : ATA_CMD_READ_SECTORS_EXT); |
| else |
| cmd.command = (iswrite ? ATA_CMD_WRITE_DMA_EXT |
| : ATA_CMD_READ_DMA_EXT); |
| } else { |
| if (usepio) |
| cmd.command = (iswrite ? ATA_CMD_WRITE_SECTORS |
| : ATA_CMD_READ_SECTORS); |
| else |
| cmd.command = (iswrite ? ATA_CMD_WRITE_DMA |
| : ATA_CMD_READ_DMA); |
| } |
| |
| cmd.sector_count = op->count; |
| cmd.lba_low = lba; |
| cmd.lba_mid = lba >> 8; |
| cmd.lba_high = lba >> 16; |
| cmd.device = ((lba >> 24) & 0xf) | ATA_CB_DH_LBA; |
| |
| int ret; |
| if (usepio) |
| ret = ata_pio_cmd_data(op, iswrite, &cmd); |
| else |
| ret = ata_dma_cmd_data(op, &cmd); |
| if (ret) |
| return DISK_RET_EBADTRACK; |
| return DISK_RET_SUCCESS; |
| } |
| |
| // 16bit command demuxer for ATA harddrives. |
| int |
| process_ata_op(struct disk_op_s *op) |
| { |
| if (!CONFIG_ATA) |
| return 0; |
| |
| switch (op->command) { |
| case CMD_READ: |
| return ata_readwrite(op, 0); |
| case CMD_WRITE: |
| return ata_readwrite(op, 1); |
| default: |
| return process_ata_misc_op(op); |
| } |
| } |
| |
| |
| /**************************************************************** |
| * ATAPI functions |
| ****************************************************************/ |
| |
| #define CDROM_CDB_SIZE 12 |
| |
| // Low-level atapi command transmit function. |
| int |
| atapi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) |
| { |
| if (! CONFIG_ATA) |
| return 0; |
| |
| struct atadrive_s *adrive_g = container_of( |
| op->drive_g, struct atadrive_s, drive); |
| struct ata_channel_s *chan_gf = GET_GLOBAL(adrive_g->chan_gf); |
| u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); |
| u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); |
| |
| struct ata_pio_command cmd; |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.lba_mid = blocksize; |
| cmd.lba_high = blocksize >> 8; |
| cmd.command = ATA_CMD_PACKET; |
| |
| // Disable interrupts |
| outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC); |
| |
| int ret = send_cmd(adrive_g, &cmd); |
| if (ret) |
| goto fail; |
| ret = ata_wait_data(iobase1); |
| if (ret) |
| goto fail; |
| |
| // Send command to device |
| outsw_fl(iobase1, MAKE_FLATPTR(GET_SEG(SS), cdbcmd), CDROM_CDB_SIZE / 2); |
| |
| int status = pause_await_not_bsy(iobase1, iobase2); |
| if (status < 0) { |
| ret = status; |
| goto fail; |
| } |
| |
| if (status & ATA_CB_STAT_ERR) { |
| u8 err = inb(iobase1 + ATA_CB_ERR); |
| // skip "Not Ready" |
| if (err != 0x20) |
| dprintf(6, "send_atapi_cmd : read error (status=%02x err=%02x)\n" |
| , status, err); |
| ret = -2; |
| goto fail; |
| } |
| if (!(status & ATA_CB_STAT_DRQ)) { |
| dprintf(6, "send_atapi_cmd : DRQ not set (status %02x)\n", status); |
| ret = -3; |
| goto fail; |
| } |
| |
| ret = ata_pio_transfer(op, 0, blocksize); |
| |
| fail: |
| // Enable interrupts |
| outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC); |
| if (ret) |
| return DISK_RET_EBADTRACK; |
| return DISK_RET_SUCCESS; |
| } |
| |
| // 16bit command demuxer for ATAPI cdroms. |
| int |
| process_atapi_op(struct disk_op_s *op) |
| { |
| if (!CONFIG_ATA) |
| return 0; |
| switch (op->command) { |
| case CMD_READ: |
| return cdb_read(op); |
| case CMD_FORMAT: |
| case CMD_WRITE: |
| return DISK_RET_EWRITEPROTECT; |
| default: |
| return process_ata_misc_op(op); |
| } |
| } |
| |
| |
| /**************************************************************** |
| * ATA detect and init |
| ****************************************************************/ |
| |
| // Send an identify device or identify device packet command. |
| static int |
| send_ata_identity(struct atadrive_s *adrive_g, u16 *buffer, int command) |
| { |
| memset(buffer, 0, DISK_SECTOR_SIZE); |
| |
| struct disk_op_s dop; |
| memset(&dop, 0, sizeof(dop)); |
| dop.drive_g = &adrive_g->drive; |
| dop.count = 1; |
| dop.lba = 1; |
| dop.buf_fl = MAKE_FLATPTR(GET_SEG(SS), buffer); |
| |
| struct ata_pio_command cmd; |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.command = command; |
| |
| return ata_pio_cmd_data(&dop, 0, &cmd); |
| } |
| |
| // Extract the ATA/ATAPI version info. |
| int |
| ata_extract_version(u16 *buffer) |
| { |
| // Extract ATA/ATAPI version. |
| u16 ataversion = buffer[80]; |
| u8 version; |
| for (version=15; version>0; version--) |
| if (ataversion & (1<<version)) |
| break; |
| return version; |
| } |
| |
| #define MAXMODEL 40 |
| |
| // Extract the ATA/ATAPI model info. |
| char * |
| ata_extract_model(char *model, u32 size, u16 *buffer) |
| { |
| // Read model name |
| int i; |
| for (i=0; i<size/2; i++) |
| *(u16*)&model[i*2] = ntohs(buffer[27+i]); |
| model[size] = 0x00; |
| nullTrailingSpace(model); |
| return model; |
| } |
| |
| // Common init code between ata and atapi |
| static struct atadrive_s * |
| init_atadrive(struct atadrive_s *dummy, u16 *buffer) |
| { |
| struct atadrive_s *adrive_g = malloc_fseg(sizeof(*adrive_g)); |
| if (!adrive_g) { |
| warn_noalloc(); |
| return NULL; |
| } |
| memset(adrive_g, 0, sizeof(*adrive_g)); |
| adrive_g->chan_gf = dummy->chan_gf; |
| adrive_g->slave = dummy->slave; |
| adrive_g->drive.cntl_id = adrive_g->chan_gf->chanid * 2 + dummy->slave; |
| adrive_g->drive.removable = (buffer[0] & 0x80) ? 1 : 0; |
| return adrive_g; |
| } |
| |
| // Detect if the given drive is an atapi - initialize it if so. |
| static struct atadrive_s * |
| init_drive_atapi(struct atadrive_s *dummy, u16 *buffer) |
| { |
| // Send an IDENTIFY_DEVICE_PACKET command to device |
| int ret = send_ata_identity(dummy, buffer, ATA_CMD_IDENTIFY_PACKET_DEVICE); |
| if (ret) |
| return NULL; |
| |
| // Success - setup as ATAPI. |
| struct atadrive_s *adrive_g = init_atadrive(dummy, buffer); |
| if (!adrive_g) |
| return NULL; |
| adrive_g->drive.type = DTYPE_ATAPI; |
| adrive_g->drive.blksize = CDROM_SECTOR_SIZE; |
| adrive_g->drive.sectors = (u64)-1; |
| u8 iscd = ((buffer[0] >> 8) & 0x1f) == 0x05; |
| char model[MAXMODEL+1]; |
| char *desc = znprintf(MAXDESCSIZE |
| , "DVD/CD [ata%d-%d: %s ATAPI-%d %s]" |
| , adrive_g->chan_gf->chanid, adrive_g->slave |
| , ata_extract_model(model, MAXMODEL, buffer) |
| , ata_extract_version(buffer) |
| , (iscd ? "DVD/CD" : "Device")); |
| dprintf(1, "%s\n", desc); |
| |
| // fill cdidmap |
| if (iscd) { |
| int prio = bootprio_find_ata_device(adrive_g->chan_gf->pci_tmp, |
| adrive_g->chan_gf->chanid, |
| adrive_g->slave); |
| boot_add_cd(&adrive_g->drive, desc, prio); |
| } |
| |
| return adrive_g; |
| } |
| |
| // Detect if the given drive is a regular ata drive - initialize it if so. |
| static struct atadrive_s * |
| init_drive_ata(struct atadrive_s *dummy, u16 *buffer) |
| { |
| // Send an IDENTIFY_DEVICE command to device |
| int ret = send_ata_identity(dummy, buffer, ATA_CMD_IDENTIFY_DEVICE); |
| if (ret) |
| return NULL; |
| |
| // Success - setup as ATA. |
| struct atadrive_s *adrive_g = init_atadrive(dummy, buffer); |
| if (!adrive_g) |
| return NULL; |
| adrive_g->drive.type = DTYPE_ATA; |
| adrive_g->drive.blksize = DISK_SECTOR_SIZE; |
| |
| adrive_g->drive.pchs.cylinders = buffer[1]; |
| adrive_g->drive.pchs.heads = buffer[3]; |
| adrive_g->drive.pchs.spt = buffer[6]; |
| |
| u64 sectors; |
| if (buffer[83] & (1 << 10)) // word 83 - lba48 support |
| sectors = *(u64*)&buffer[100]; // word 100-103 |
| else |
| sectors = *(u32*)&buffer[60]; // word 60 and word 61 |
| adrive_g->drive.sectors = sectors; |
| u64 adjsize = sectors >> 11; |
| char adjprefix = 'M'; |
| if (adjsize >= (1 << 16)) { |
| adjsize >>= 10; |
| adjprefix = 'G'; |
| } |
| char model[MAXMODEL+1]; |
| char *desc = znprintf(MAXDESCSIZE |
| , "ata%d-%d: %s ATA-%d Hard-Disk (%u %ciBytes)" |
| , adrive_g->chan_gf->chanid, adrive_g->slave |
| , ata_extract_model(model, MAXMODEL, buffer) |
| , ata_extract_version(buffer) |
| , (u32)adjsize, adjprefix); |
| dprintf(1, "%s\n", desc); |
| |
| int prio = bootprio_find_ata_device(adrive_g->chan_gf->pci_tmp, |
| adrive_g->chan_gf->chanid, |
| adrive_g->slave); |
| // Register with bcv system. |
| boot_add_hd(&adrive_g->drive, desc, prio); |
| |
| return adrive_g; |
| } |
| |
| static u64 SpinupEnd; |
| |
| // Wait for non-busy status and check for "floating bus" condition. |
| static int |
| powerup_await_non_bsy(u16 base) |
| { |
| u8 orstatus = 0; |
| u8 status; |
| for (;;) { |
| status = inb(base+ATA_CB_STAT); |
| if (!(status & ATA_CB_STAT_BSY)) |
| break; |
| orstatus |= status; |
| if (orstatus == 0xff) { |
| dprintf(4, "powerup IDE floating\n"); |
| return orstatus; |
| } |
| if (check_tsc(SpinupEnd)) { |
| warn_timeout(); |
| return -1; |
| } |
| yield(); |
| } |
| dprintf(6, "powerup iobase=%x st=%x\n", base, status); |
| return status; |
| } |
| |
| // Detect any drives attached to a given controller. |
| static void |
| ata_detect(void *data) |
| { |
| struct ata_channel_s *chan_gf = data; |
| struct atadrive_s dummy; |
| memset(&dummy, 0, sizeof(dummy)); |
| dummy.chan_gf = chan_gf; |
| // Device detection |
| int didreset = 0; |
| u8 slave; |
| for (slave=0; slave<=1; slave++) { |
| // Wait for not-bsy. |
| u16 iobase1 = chan_gf->iobase1; |
| int status = powerup_await_non_bsy(iobase1); |
| if (status < 0) |
| continue; |
| u8 newdh = slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0; |
| outb(newdh, iobase1+ATA_CB_DH); |
| ndelay(400); |
| status = powerup_await_non_bsy(iobase1); |
| if (status < 0) |
| continue; |
| |
| // Check if ioport registers look valid. |
| outb(newdh, iobase1+ATA_CB_DH); |
| u8 dh = inb(iobase1+ATA_CB_DH); |
| outb(0x55, iobase1+ATA_CB_SC); |
| outb(0xaa, iobase1+ATA_CB_SN); |
| u8 sc = inb(iobase1+ATA_CB_SC); |
| u8 sn = inb(iobase1+ATA_CB_SN); |
| dprintf(6, "ata_detect ata%d-%d: sc=%x sn=%x dh=%x\n" |
| , chan_gf->chanid, slave, sc, sn, dh); |
| if (sc != 0x55 || sn != 0xaa || dh != newdh) |
| continue; |
| |
| // Prepare new drive. |
| dummy.slave = slave; |
| |
| // reset the channel |
| if (!didreset) { |
| ata_reset(&dummy); |
| didreset = 1; |
| } |
| |
| // check for ATAPI |
| u16 buffer[256]; |
| struct atadrive_s *adrive_g = init_drive_atapi(&dummy, buffer); |
| if (!adrive_g) { |
| // Didn't find an ATAPI drive - look for ATA drive. |
| u8 st = inb(iobase1+ATA_CB_STAT); |
| if (!st) |
| // Status not set - can't be a valid drive. |
| continue; |
| |
| // Wait for RDY. |
| int ret = await_rdy(iobase1); |
| if (ret < 0) |
| continue; |
| |
| // check for ATA. |
| adrive_g = init_drive_ata(&dummy, buffer); |
| if (!adrive_g) |
| // No ATA drive found |
| continue; |
| } |
| |
| u16 resetresult = buffer[93]; |
| dprintf(6, "ata_detect resetresult=%04x\n", resetresult); |
| if (!slave && (resetresult & 0xdf61) == 0x4041) |
| // resetresult looks valid and device 0 is responding to |
| // device 1 requests - device 1 must not be present - skip |
| // detection. |
| break; |
| } |
| } |
| |
| // Initialize an ata controller and detect its drives. |
| static void |
| init_controller(struct pci_device *pci, int irq |
| , u32 port1, u32 port2, u32 master) |
| { |
| static int chanid = 0; |
| struct ata_channel_s *chan_gf = malloc_fseg(sizeof(*chan_gf)); |
| if (!chan_gf) { |
| warn_noalloc(); |
| return; |
| } |
| chan_gf->chanid = chanid++; |
| chan_gf->irq = irq; |
| chan_gf->pci_bdf = pci ? pci->bdf : -1; |
| chan_gf->pci_tmp = pci; |
| chan_gf->iobase1 = port1; |
| chan_gf->iobase2 = port2; |
| chan_gf->iomaster = master; |
| dprintf(1, "ATA controller %d at %x/%x/%x (irq %d dev %x)\n" |
| , chanid, port1, port2, master, irq, chan_gf->pci_bdf); |
| run_thread(ata_detect, chan_gf); |
| } |
| |
| #define IRQ_ATA1 14 |
| #define IRQ_ATA2 15 |
| |
| // Handle controllers on an ATA PCI device. |
| static void |
| init_pciata(struct pci_device *pci, u8 prog_if) |
| { |
| pci->have_driver = 1; |
| u16 bdf = pci->bdf; |
| u8 pciirq = pci_config_readb(bdf, PCI_INTERRUPT_LINE); |
| int master = 0; |
| if (CONFIG_ATA_DMA && prog_if & 0x80) { |
| // Check for bus-mastering. |
| u32 bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_4); |
| if (bar & PCI_BASE_ADDRESS_SPACE_IO) { |
| master = bar & PCI_BASE_ADDRESS_IO_MASK; |
| pci_config_maskw(bdf, PCI_COMMAND, 0, PCI_COMMAND_MASTER); |
| } |
| } |
| |
| u32 port1, port2, irq; |
| if (prog_if & 1) { |
| port1 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_0) |
| & PCI_BASE_ADDRESS_IO_MASK); |
| port2 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_1) |
| & PCI_BASE_ADDRESS_IO_MASK); |
| irq = pciirq; |
| } else { |
| port1 = PORT_ATA1_CMD_BASE; |
| port2 = PORT_ATA1_CTRL_BASE; |
| irq = IRQ_ATA1; |
| } |
| init_controller(pci, irq, port1, port2, master); |
| |
| if (prog_if & 4) { |
| port1 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_2) |
| & PCI_BASE_ADDRESS_IO_MASK); |
| port2 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_3) |
| & PCI_BASE_ADDRESS_IO_MASK); |
| irq = pciirq; |
| } else { |
| port1 = PORT_ATA2_CMD_BASE; |
| port2 = PORT_ATA2_CTRL_BASE; |
| irq = IRQ_ATA2; |
| } |
| init_controller(pci, irq, port1, port2, master ? master + 8 : 0); |
| } |
| |
| static void |
| found_genericata(struct pci_device *pci, void *arg) |
| { |
| init_pciata(pci, pci->prog_if); |
| } |
| |
| static void |
| found_compatibleahci(struct pci_device *pci, void *arg) |
| { |
| if (CONFIG_AHCI) |
| // Already handled directly via native ahci interface. |
| return; |
| init_pciata(pci, 0x8f); |
| } |
| |
| static const struct pci_device_id pci_ata_tbl[] = { |
| PCI_DEVICE_CLASS(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE |
| , found_genericata), |
| PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4391, found_compatibleahci), |
| PCI_DEVICE_END, |
| }; |
| |
| // Locate and init ata controllers. |
| static void |
| ata_init(void) |
| { |
| if (!CONFIG_COREBOOT && !PCIDevices) { |
| // No PCI devices found - probably a QEMU "-M isapc" machine. |
| // Try using ISA ports for ATA controllers. |
| init_controller(NULL, IRQ_ATA1 |
| , PORT_ATA1_CMD_BASE, PORT_ATA1_CTRL_BASE, 0); |
| init_controller(NULL, IRQ_ATA2 |
| , PORT_ATA2_CMD_BASE, PORT_ATA2_CTRL_BASE, 0); |
| return; |
| } |
| |
| // Scan PCI bus for ATA adapters |
| struct pci_device *pci; |
| foreachpci(pci) { |
| pci_init_device(pci_ata_tbl, pci, NULL); |
| } |
| } |
| |
| void |
| ata_setup(void) |
| { |
| ASSERT32FLAT(); |
| if (!CONFIG_ATA) |
| return; |
| |
| dprintf(3, "init hard drives\n"); |
| |
| SpinupEnd = calc_future_tsc(IDE_TIMEOUT); |
| ata_init(); |
| |
| SET_BDA(disk_control_byte, 0xc0); |
| |
| enable_hwirq(14, FUNC16(entry_76)); |
| } |