| #!/usr/bin/python |
| # Copyright (C) 2011 Red Hat, Inc., Michael S. Tsirkin <mst@redhat.com> |
| # |
| # This file may be distributed under the terms of the GNU GPLv3 license. |
| |
| # Process mixed ASL/AML listing (.lst file) produced by iasl -l |
| # Locate and execute ACPI_EXTRACT directives, output offset info |
| # |
| # Documentation of ACPI_EXTRACT_* directive tags: |
| # |
| # These directive tags output offset information from AML for BIOS runtime |
| # table generation. |
| # Each directive is of the form: |
| # ACPI_EXTRACT_<TYPE> <array_name> <Operator> (...) |
| # and causes the extractor to create an array |
| # named <array_name> with offset, in the generated AML, |
| # of an object of a given type in the following <Operator>. |
| # |
| # A directive must fit on a single code line. |
| # |
| # Object type in AML is verified, a mismatch causes a build failure. |
| # |
| # Directives and operators currently supported are: |
| # ACPI_EXTRACT_NAME_DWORD_CONST - extract a Dword Const object from Name() |
| # ACPI_EXTRACT_NAME_WORD_CONST - extract a Word Const object from Name() |
| # ACPI_EXTRACT_NAME_BYTE_CONST - extract a Byte Const object from Name() |
| # ACPI_EXTRACT_METHOD_STRING - extract a NameString from Method() |
| # ACPI_EXTRACT_NAME_STRING - extract a NameString from Name() |
| # ACPI_EXTRACT_PROCESSOR_START - start of Processor() block |
| # ACPI_EXTRACT_PROCESSOR_STRING - extract a NameString from Processor() |
| # ACPI_EXTRACT_PROCESSOR_END - offset at last byte of Processor() + 1 |
| # ACPI_EXTRACT_PKG_START - start of Package block |
| # |
| # ACPI_EXTRACT_ALL_CODE - create an array storing the generated AML bytecode |
| # |
| # ACPI_EXTRACT is not allowed anywhere else in code, except in comments. |
| |
| import re; |
| import sys; |
| import fileinput; |
| |
| aml = [] |
| asl = [] |
| output = {} |
| debug = "" |
| |
| class asl_line: |
| line = None |
| lineno = None |
| aml_offset = None |
| |
| def die(diag): |
| sys.stderr.write("Error: %s; %s\n" % (diag, debug)) |
| sys.exit(1) |
| |
| #Store an ASL command, matching AML offset, and input line (for debugging) |
| def add_asl(lineno, line): |
| l = asl_line() |
| l.line = line |
| l.lineno = lineno |
| l.aml_offset = len(aml) |
| asl.append(l) |
| |
| #Store an AML byte sequence |
| #Verify that offset output by iasl matches # of bytes so far |
| def add_aml(offset, line): |
| o = int(offset, 16); |
| # Sanity check: offset must match size of code so far |
| if (o != len(aml)): |
| die("Offset 0x%x != 0x%x" % (o, len(aml))) |
| # Strip any trailing dots and ASCII dump after " |
| line = re.sub(r'\s*\.*\s*".*$',"", line) |
| # Strip traling whitespace |
| line = re.sub(r'\s+$',"", line) |
| # Strip leading whitespace |
| line = re.sub(r'^\s+',"", line) |
| # Split on whitespace |
| code = re.split(r'\s+', line) |
| for c in code: |
| # Require a legal hex number, two digits |
| if (not(re.search(r'^[0-9A-Fa-f][0-9A-Fa-f]$', c))): |
| die("Unexpected octet %s" % c); |
| aml.append(int(c, 16)); |
| |
| # Process aml bytecode array, decoding AML |
| def aml_pkglen_bytes(offset): |
| # PkgLength can be multibyte. Bits 8-7 give the # of extra bytes. |
| pkglenbytes = aml[offset] >> 6; |
| return pkglenbytes + 1 |
| |
| def aml_pkglen(offset): |
| pkgstart = offset |
| pkglenbytes = aml_pkglen_bytes(offset) |
| pkglen = aml[offset] & 0x3F |
| # If multibyte, first nibble only uses bits 0-3 |
| if ((pkglenbytes > 1) and (pkglen & 0x30)): |
| die("PkgLen bytes 0x%x but first nibble 0x%x expected 0x0X" % |
| (pkglen, pkglen)) |
| offset += 1 |
| pkglenbytes -= 1 |
| for i in range(pkglenbytes): |
| pkglen |= aml[offset + i] << (i * 8 + 4) |
| if (len(aml) < pkgstart + pkglen): |
| die("PckgLen 0x%x at offset 0x%x exceeds AML size 0x%x" % |
| (pkglen, offset, len(aml))) |
| return pkglen |
| |
| # Given method offset, find its NameString offset |
| def aml_method_string(offset): |
| #0x14 MethodOp PkgLength NameString MethodFlags TermList |
| if (aml[offset] != 0x14): |
| die( "Method offset 0x%x: expected 0x14 actual 0x%x" % |
| (offset, aml[offset])); |
| offset += 1; |
| pkglenbytes = aml_pkglen_bytes(offset) |
| offset += pkglenbytes; |
| return offset; |
| |
| # Given name offset, find its NameString offset |
| def aml_name_string(offset): |
| #0x08 NameOp NameString DataRef |
| if (aml[offset] != 0x08): |
| die( "Name offset 0x%x: expected 0x08 actual 0x%x" % |
| (offset, aml[offset])); |
| offset += 1 |
| # Block Name Modifier. Skip it. |
| if (aml[offset] == 0x5c or aml[offset] == 0x5e): |
| offset += 1 |
| return offset; |
| |
| # Given data offset, find dword const offset |
| def aml_data_dword_const(offset): |
| #0x08 NameOp NameString DataRef |
| if (aml[offset] != 0x0C): |
| die( "Name offset 0x%x: expected 0x0C actual 0x%x" % |
| (offset, aml[offset])); |
| return offset + 1; |
| |
| # Given data offset, find word const offset |
| def aml_data_word_const(offset): |
| #0x08 NameOp NameString DataRef |
| if (aml[offset] != 0x0B): |
| die( "Name offset 0x%x: expected 0x0B actual 0x%x" % |
| (offset, aml[offset])); |
| return offset + 1; |
| |
| # Given data offset, find byte const offset |
| def aml_data_byte_const(offset): |
| #0x08 NameOp NameString DataRef |
| if (aml[offset] != 0x0A): |
| die( "Name offset 0x%x: expected 0x0A actual 0x%x" % |
| (offset, aml[offset])); |
| return offset + 1; |
| |
| # Given name offset, find dword const offset |
| def aml_name_dword_const(offset): |
| return aml_data_dword_const(aml_name_string(offset) + 4) |
| |
| # Given name offset, find word const offset |
| def aml_name_word_const(offset): |
| return aml_data_word_const(aml_name_string(offset) + 4) |
| |
| # Given name offset, find byte const offset |
| def aml_name_byte_const(offset): |
| return aml_data_byte_const(aml_name_string(offset) + 4) |
| |
| def aml_device_start(offset): |
| #0x5B 0x82 DeviceOp PkgLength NameString |
| if ((aml[offset] != 0x5B) or (aml[offset + 1] != 0x82)): |
| die( "Name offset 0x%x: expected 0x5B 0x82 actual 0x%x 0x%x" % |
| (offset, aml[offset], aml[offset + 1])); |
| return offset |
| |
| def aml_device_string(offset): |
| #0x5B 0x82 DeviceOp PkgLength NameString |
| start = aml_device_start(offset) |
| offset += 2 |
| pkglenbytes = aml_pkglen_bytes(offset) |
| offset += pkglenbytes |
| return offset |
| |
| def aml_device_end(offset): |
| start = aml_device_start(offset) |
| offset += 2 |
| pkglenbytes = aml_pkglen_bytes(offset) |
| pkglen = aml_pkglen(offset) |
| return offset + pkglen |
| |
| def aml_processor_start(offset): |
| #0x5B 0x83 ProcessorOp PkgLength NameString ProcID |
| if ((aml[offset] != 0x5B) or (aml[offset + 1] != 0x83)): |
| die( "Name offset 0x%x: expected 0x5B 0x83 actual 0x%x 0x%x" % |
| (offset, aml[offset], aml[offset + 1])); |
| return offset |
| |
| def aml_processor_string(offset): |
| #0x5B 0x83 ProcessorOp PkgLength NameString ProcID |
| start = aml_processor_start(offset) |
| offset += 2 |
| pkglenbytes = aml_pkglen_bytes(offset) |
| offset += pkglenbytes |
| return offset |
| |
| def aml_processor_end(offset): |
| start = aml_processor_start(offset) |
| offset += 2 |
| pkglenbytes = aml_pkglen_bytes(offset) |
| pkglen = aml_pkglen(offset) |
| return offset + pkglen |
| |
| def aml_package_start(offset): |
| offset = aml_name_string(offset) + 4 |
| # 0x12 PkgLength NumElements PackageElementList |
| if (aml[offset] != 0x12): |
| die( "Name offset 0x%x: expected 0x12 actual 0x%x" % |
| (offset, aml[offset])); |
| offset += 1 |
| return offset + aml_pkglen_bytes(offset) + 1 |
| |
| lineno = 0 |
| for line in fileinput.input(): |
| # Strip trailing newline |
| line = line.rstrip(); |
| # line number and debug string to output in case of errors |
| lineno = lineno + 1 |
| debug = "input line %d: %s" % (lineno, line) |
| #ASL listing: space, then line#, then ...., then code |
| pasl = re.compile('^\s+([0-9]+)\.\.\.\.\s*') |
| m = pasl.search(line) |
| if (m): |
| add_asl(lineno, pasl.sub("", line)); |
| # AML listing: offset in hex, then ...., then code |
| paml = re.compile('^([0-9A-Fa-f]+)\.\.\.\.\s*') |
| m = paml.search(line) |
| if (m): |
| add_aml(m.group(1), paml.sub("", line)) |
| |
| # Now go over code |
| # Track AML offset of a previous non-empty ASL command |
| prev_aml_offset = -1 |
| for i in range(len(asl)): |
| debug = "input line %d: %s" % (asl[i].lineno, asl[i].line) |
| |
| l = asl[i].line |
| |
| # skip if not an extract directive |
| a = len(re.findall(r'ACPI_EXTRACT', l)) |
| if (not a): |
| # If not empty, store AML offset. Will be used for sanity checks |
| # IASL seems to put {}. at random places in the listing. |
| # Ignore any non-words for the purpose of this test. |
| m = re.search(r'\w+', l) |
| if (m): |
| prev_aml_offset = asl[i].aml_offset |
| continue |
| |
| if (a > 1): |
| die("Expected at most one ACPI_EXTRACT per line, actual %d" % a) |
| |
| mext = re.search(r''' |
| ^\s* # leading whitespace |
| /\*\s* # start C comment |
| (ACPI_EXTRACT_\w+) # directive: group(1) |
| \s+ # whitspace separates directive from array name |
| (\w+) # array name: group(2) |
| \s*\*/ # end of C comment |
| \s*$ # trailing whitespace |
| ''', l, re.VERBOSE) |
| if (not mext): |
| die("Stray ACPI_EXTRACT in input") |
| |
| # previous command must have produced some AML, |
| # otherwise we are in a middle of a block |
| if (prev_aml_offset == asl[i].aml_offset): |
| die("ACPI_EXTRACT directive in the middle of a block") |
| |
| directive = mext.group(1) |
| array = mext.group(2) |
| offset = asl[i].aml_offset |
| |
| if (directive == "ACPI_EXTRACT_ALL_CODE"): |
| if array in output: |
| die("%s directive used more than once" % directive) |
| output[array] = aml |
| continue |
| if (directive == "ACPI_EXTRACT_NAME_DWORD_CONST"): |
| offset = aml_name_dword_const(offset) |
| elif (directive == "ACPI_EXTRACT_NAME_WORD_CONST"): |
| offset = aml_name_word_const(offset) |
| elif (directive == "ACPI_EXTRACT_NAME_BYTE_CONST"): |
| offset = aml_name_byte_const(offset) |
| elif (directive == "ACPI_EXTRACT_NAME_STRING"): |
| offset = aml_name_string(offset) |
| elif (directive == "ACPI_EXTRACT_METHOD_STRING"): |
| offset = aml_method_string(offset) |
| elif (directive == "ACPI_EXTRACT_DEVICE_START"): |
| offset = aml_device_start(offset) |
| elif (directive == "ACPI_EXTRACT_DEVICE_STRING"): |
| offset = aml_device_string(offset) |
| elif (directive == "ACPI_EXTRACT_DEVICE_END"): |
| offset = aml_device_end(offset) |
| elif (directive == "ACPI_EXTRACT_PROCESSOR_START"): |
| offset = aml_processor_start(offset) |
| elif (directive == "ACPI_EXTRACT_PROCESSOR_STRING"): |
| offset = aml_processor_string(offset) |
| elif (directive == "ACPI_EXTRACT_PROCESSOR_END"): |
| offset = aml_processor_end(offset) |
| elif (directive == "ACPI_EXTRACT_PKG_START"): |
| offset = aml_package_start(offset) |
| else: |
| die("Unsupported directive %s" % directive) |
| |
| if array not in output: |
| output[array] = [] |
| output[array].append(offset) |
| |
| debug = "at end of file" |
| |
| def get_value_type(maxvalue): |
| #Use type large enough to fit the table |
| if (maxvalue >= 0x10000): |
| return "int" |
| elif (maxvalue >= 0x100): |
| return "short" |
| else: |
| return "char" |
| |
| # Pretty print output |
| for array in output.keys(): |
| otype = get_value_type(max(output[array])) |
| odata = [] |
| for value in output[array]: |
| odata.append("0x%x" % value) |
| sys.stdout.write("static unsigned %s %s[] = {\n" % (otype, array)) |
| sys.stdout.write(",\n".join(odata)) |
| sys.stdout.write('\n};\n'); |