Gitiles
Code Review
Sign In
review.coreboot.org
/
coreboot
/
11b6ab6492cebf215bbd95ff69fbb2652c99e8c9
/
src
/
mainboard
/
google
0a11a61
CBMEM: Move cbmemc_reinit()
by Kyösti Mälkki
· 10 years ago
224f922
vboot2: read dev and recovery switch
by Daisuke Nojiri
· 10 years ago
bcc1d42
vboot2: implement select_firmware for pre-romstage verification
by Daisuke Nojiri
· 10 years ago
5c4a510
rush: Add support for rush board
by Furquan Shaikh
· 10 years ago
7e72abe
samus: Update indices of ramstage and refcode blobs
by Randall Spangler
· 10 years ago
808a254
samus: Delay bringing SSD out of reset
by Duncan Laurie
· 10 years ago
6a342cb
samus: Disable self refresh and MRC cache on broadwell
by Duncan Laurie
· 10 years ago
515d3d2
samus: Enable keyboard backlight
by Duncan Laurie
· 10 years ago
00aedc5
samus: add acpi resource for supporting RT5677 codec
by Kane Chen
· 10 years ago
e381544
rambi: configure USBPHY_COMPBG by the setting in devicetree.cb
by Kane Chen
· 10 years ago
054c83a
Fix mainboard names for daisy and peach_pit
by David Hendricks
· 10 years ago
c253189
samus: Updates from P2 build
by Duncan Laurie
· 10 years ago
990a592
samus: Enable EC ALS device
by Duncan Laurie
· 10 years ago
a416f21
samus: Updates for P2 board
by Duncan Laurie
· 10 years ago
0c0767c
storm: Increase DRAM size to 1024MB
by David Hendricks
· 10 years ago
f6ad832
storm: USB fixes for proto0
by Vadim Bendebury
· 10 years ago
77757c2
mainboard/*/romstage.c: Sanitize system header inclusions
by Edward O'Callaghan
· 10 years ago
028cba9
ipq806x: Add USB support
by Julius Werner
· 10 years ago
96ef188
nyan_big: Update Hynix BCTs and add Kingston 2GB BCT.
by Tom Warren
· 10 years ago
cb2351e
nyan: Ignore the recovery GPIO.
by Todd Broch
· 10 years ago
5106b9d
samus: Minor fixes for P1.9 boards
by Duncan Laurie
· 10 years ago
502c38f
samus: Enable DDI2 hotplug
by Duncan Laurie
· 10 years ago
25c6f75
samus: Update for board revision 1.9
by Duncan Laurie
· 10 years ago
fe8b788
samus: Move SPD related information to spd directory
by Duncan Laurie
· 10 years ago
2c04117
mainboard/storm: setup mmu in storm mainboard_init
by Deepa Dinamani
· 10 years ago
1ea5685
storm: enable early console
by Vadim Bendebury
· 10 years ago
15c98b0
storm/ipq8064: add dynamic CBMEM support
by Vadim Bendebury
· 10 years ago
c619c41
blaze: change ramcode 1000/1001/1010 to use 792MHz bct
by Neil Chen
· 10 years ago
0e2d9b6
storm: ipq8064: enable CBFS SPI wrapper
by Vadim Bendebury
· 10 years ago
2663a55
samus: Combine mainboard patches to build soc/intel/broadwell
by Duncan Laurie
· 10 years ago
11c4c92
ipq8064/storm: UART enable and various fixes
by Vadim Bendebury
· 10 years ago
a859aa3
nyan*: Set GEN2 I2C pads to open-drain mode
by Ken Chang
· 10 years ago
0dadb76
rambi: Add _PRW for LID0 ACPI Device
by Shawn Nematbakhsh
· 10 years ago
8c7e622
rambi: Unconditionally clear the EC recovery request
by Sheng-Liang Song
· 10 years ago
704c006
Rambi: Set SOC_DISP_ON as GPIO to avoid LCD_VCC glitch
by Kein Yuan
· 10 years ago
6a0982e
nyan_blaze: Enable USB port2
by Neil Chen
· 10 years ago
d72d8aa
nyan*: Log boot reason in eventlog
by David Hendricks
· 10 years ago
f17680b
ipq8064: prepare uart driver for use in coreboot
by Vadim Bendebury
· 10 years ago
c7aa64b
blaze: change ramcode 0001/0010 to use 792MHz bct
by Jerry Wang
· 10 years ago
c852206
nyan*: Detect watchdog resets and reset the whole machine.
by Gabe Black
· 10 years ago
c3101a0
blaze: change ramcode 0000 to use 792MHz bct
by Ken Chang
· 10 years ago
bb932c5
nyan*: I2C: Implement bus clear when 'ARB_LOST' error occurs
by Tom Warren
· 10 years ago
86bd91a
nyan*: Clear VDDIO_SDMMC3 to reset SD card reader.
by Hung-Te Lin
· 10 years ago
6a16f69
nyan*: Disable SD card reader power gpio.
by Hung-Te Lin
· 10 years ago
75f70179
nyan*: Add fast link training functions
by Jimmy Zhang
· 10 years ago
a081305
rambi: align gpu pipea settings with the VBIOS
by Aaron Durbin
· 10 years ago
a0b02e7
nyan*: cbmem: Move the call to cbmemc_reinit.
by Gabe Black
· 10 years ago
5a056d3
tegra124: modify panel init sequence
by Ken Chang
· 10 years ago
41359bd
nyan*: enable CLAMP_INPUTS
by Ken Chang
· 10 years ago
f6e17c0
nyan*: Add eventlog support
by David Hendricks
· 10 years ago
b4983c4
blaze: Change samsung RAMCODE to samsung-2GB-204/samsung-4GB-204
by Neil Chen
· 10 years ago
cdb61a6
i2c: Replace the i2c API.
by Gabe Black
· 10 years ago
1a8e0af
tegra124: Setup clock PLLD by approximating display panel pixel clock.
by Hung-Te Lin
· 10 years ago
c05a905
nyan*: pinmux: fix PWM1/2 conflicts
by Tom Warren
· 10 years ago
846f344
tegra124: set safe values for href_to_sync and vref_to_sync
by Jimmy Zhang
· 10 years ago
46e0975
nyan: Enable the cbmem console on nyan and allocate space for it in SRAM.
by Gabe Black
· 10 years ago
cad7c4e
nyans: prepare for vboot verification of ramstage
by Aaron Durbin
· 10 years ago
1e68fc5c
blaze: Change RAMCODE 0010 to hynix-2GB-792MHz
by Neil Chen
· 10 years ago
83cbeda
nyan*: Fix unexpected symbol (CR) when converting DOS-formatted BCT config.
by Neil Chen
· 10 years ago
e51373b
blaze: set 8 default BCT as hynix-2GB-204MHz
by Neil Chen
· 10 years ago
92dfa9c
nyan*: Reduce the EC SPI bus frequency to 3 MHz.
by Gabe Black
· 10 years ago
967058f
spi: Factor EC protocol details out of the SPI drivers.
by Gabe Black
· 10 years ago
d189085
mainboard/google/samus: Fix usage of GNU field designator ext
by Edward O'Callaghan
· 10 years ago
845e17c
Remove IRQ_SLOT_COUNT on all boards without PIRQ table.
by Vladimir Serbinenko
· 10 years ago
796fe06
Mark non-executable files non-executable
by Patrick Georgi
· 10 years ago
bd79c5e
Replace hlt() loops with halt()
by Patrick Georgi
· 10 years ago
aec6c47
sandy/ivy: Remove explicit setting of HAVE_SMI_HANDLER.
by Vladimir Serbinenko
· 10 years ago
80b880f
google/butterfly: fix off-by-one issues
by Patrick Georgi
· 10 years ago
33b535f
sandy/ivy/nehalem: Remerge interrupt handling
by Vladimir Serbinenko
· 10 years ago
e7cb1bc
Big, Blaze: Set I2S1 Source to CLK_M to Fix Beep
by Daisuke Nojiri
· 10 years ago
b19136f
nyan: tpm: Increase the TPM frequency to 400 KHz.
by Gabe Black
· 10 years ago
14ade70
Nyan: Set I2S1 Source to CLK_M
by Daisuke Nojiri
· 10 years ago
4a12cfe
nyan: Move some pinmux and clock/reset configuration to ROM stage.
by Gabe Black
· 10 years ago
bd5925a
t124: Clean up display init functions
by Jimmy Zhang
· 10 years ago
4e16a2e
blaze: Create a nyan_blaze mainboard, copied from nyan_big
by Tom Warren
· 10 years ago
d551e82
nyan*: Switching unused pin to GPIO
by Neil Chen
· 10 years ago
1f4e283
nyan: big: Only delay when and as long as necessary in the PMIC setup code.
by Gabe Black
· 10 years ago
41c9260
nyan: big: Set the i2c controller frequencies appropriately.
by Gabe Black
· 10 years ago
78a1b8c
Nyan: Set DMA Reserve to 2MB
by Daisuke Nojiri
· 10 years ago
4fa158c
nyan: Select the CD570M Tegra124 model.
by Gabe Black
· 10 years ago
6940c0d
nyan: Update 924MHz BCT w/latest qual'd cfg, use 924 as default speed for 2GB
by Tom Warren
· 10 years ago
b9a4b71
nyan: nyan_big: Mark the address range covering the SRAM as cachable.
by Gabe Black
· 10 years ago
c1e41b7
nyan: Add 4GB bct support
by Jimmy Zhang
· 10 years ago
83ed805
nyan: big: Check dram_end when setting up caching in ROM stage.
by Gabe Black
· 10 years ago
476f731
Copy u-boot sources as is and modify the tree to still build
by Vadim Bendebury
· 10 years ago
9cb70ae
Include IPQ8064 SBLs code in the coreboot bootblock
by Vadim Bendebury
· 10 years ago
7f0cb15
tegra124: Program PWM1 to drive panel backlight
by Andrew Chew
· 10 years ago
372a5bbd
tegra124: Port a PWM clocking change to big.
by Gabe Black
· 10 years ago
c38c6f7
tegra124: Enable PWM clock, and set up PWM1 pin
by Andrew Chew
· 10 years ago
5cbbc70
tegra124: nyan: Keep in memory structures below 4GB.
by Gabe Black
· 10 years ago
f220df6
nyan: Use asm volatile instead of plain asm so it doesn't get optimized out.
by Gabe Black
· 10 years ago
fd9defc
arm: Redesign, clarify and clean up cache related code
by Julius Werner
· 11 years ago
48b6b97
src: Too many terminators ';;' at end of stmts, stop Skynet
by Edward O'Callaghan
· 10 years ago
5b044ae
bd82x6x: Move to common FADT.
by Vladimir Serbinenko
· 10 years ago
38b9854
mainboard/google/butterfly: Fix usage of GNU field designator ext
by Edward O'Callaghan
· 10 years ago
77896c1
mainboard/google/stout: Fix usage of GNU field designator ext
by Edward O'Callaghan
· 10 years ago
25ae602
rambi: switch MCLK from 19.2Mhz to 25Mhz
by Kein Yuan
· 10 years ago
dd20d5d
baytrail: Remove unused devicetree fields
by Shawn Nematbakhsh
· 10 years ago
1d07bf2
rambi: always show dev/rec screens on eDP connected panel
by Kein Yuan
· 10 years ago
64982c50
tegra/nyan*: sdram updates
by Tom Warren
· 11 years ago
Next »