Angel Pons | 8a3453f | 2020-04-02 23:48:19 +0200 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0-only */ |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 2 | |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 3 | #include <console/console.h> |
Werner Zeh | a1a3be1 | 2022-12-22 09:25:07 +0100 | [diff] [blame] | 4 | #include <device/device.h> |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 5 | #include <device/i2c_bus.h> |
| 6 | #include <types.h> |
Jan Samek | 6691844 | 2022-09-15 16:31:44 +0200 | [diff] [blame] | 7 | #include <bootstate.h> |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 8 | |
| 9 | #include "ptn3460.h" |
| 10 | |
| 11 | /** |
| 12 | * \brief This function selects one of 7 EDID-tables inside PTN3460 |
| 13 | * which should be emulated on display port and turn emulation ON |
| 14 | * @param *dev Pointer to the relevant I2C controller |
| 15 | * @param edid_num Number of EDID to emulate (0..6) |
| 16 | * @return PTN_SUCCESS or error code |
| 17 | */ |
| 18 | static int ptn_select_edid(struct device *dev, uint8_t edid_num) |
| 19 | { |
| 20 | int status = 0; |
| 21 | u8 val; |
| 22 | |
| 23 | if (edid_num > PTN_MAX_EDID_NUM) |
| 24 | return PTN_INVALID_EDID; |
| 25 | val = (edid_num << 1) | PTN_ENABLE_EMULATION; |
| 26 | status = i2c_dev_writeb_at(dev, PTN_CONFIG_OFF + 4, val); |
| 27 | return status ? (PTN_BUS_ERROR | status) : PTN_SUCCESS; |
| 28 | } |
| 29 | |
| 30 | /** |
| 31 | * \brief This function writes one EDID data structure to PTN3460 |
| 32 | * @param *dev Pointer to the relevant I2C controller |
| 33 | * @param edid_num Number of EDID that must be written (0..6) |
| 34 | * @param *data Pointer to a buffer where data to write is stored in |
| 35 | * @return PTN_SUCCESS on success or error code |
| 36 | */ |
| 37 | static int ptn3460_write_edid(struct device *dev, u8 edid_num, u8 *data) |
| 38 | { |
| 39 | int status; |
| 40 | int i; |
| 41 | |
| 42 | if (edid_num > PTN_MAX_EDID_NUM) |
| 43 | return PTN_INVALID_EDID; |
| 44 | |
| 45 | /* First enable access to the desired EDID table */ |
| 46 | status = i2c_dev_writeb_at(dev, PTN_CONFIG_OFF + 5, edid_num); |
| 47 | if (status) |
| 48 | return (PTN_BUS_ERROR | status); |
| 49 | |
| 50 | /* Now we can simply write EDID data to ptn3460 */ |
| 51 | for (i = 0; i < PTN_EDID_LEN; i++) { |
| 52 | status = i2c_dev_writeb_at(dev, PTN_EDID_OFF + i, data[i]); |
| 53 | if (status) |
| 54 | return (PTN_BUS_ERROR | status); |
| 55 | } |
| 56 | return PTN_SUCCESS; |
| 57 | } |
| 58 | |
| 59 | /** |
| 60 | * \brief This function sets up the DP2LVDS-converter to be used with the |
| 61 | * appropriate EDID data |
| 62 | * @param *dev Pointer to the I2C controller where PTN3460 is attached |
| 63 | */ |
| 64 | static void ptn3460_init(struct device *dev) |
| 65 | { |
| 66 | struct ptn_3460_config cfg; |
Elyes Haouas | 1ef547e | 2022-11-18 15:05:39 +0100 | [diff] [blame] | 67 | uint8_t edid_data[PTN_EDID_LEN], edid_tab, *ptr = (uint8_t *)&cfg; |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 68 | int i, val; |
| 69 | |
Jan Samek | 6691844 | 2022-09-15 16:31:44 +0200 | [diff] [blame] | 70 | /* Guard against re-initialization of the device */ |
| 71 | static bool init_done = false; |
| 72 | |
| 73 | if (init_done) { |
| 74 | printk(BIOS_DEBUG, "Skipping PTN3460 init as it's already initialized\n"); |
| 75 | return; |
| 76 | } |
| 77 | |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 78 | /* Mainboard provides EDID data. */ |
Jan Samek | a3b29d7 | 2023-01-31 14:09:30 +0100 | [diff] [blame] | 79 | if (mainboard_ptn3460_get_edid(edid_data) != CB_SUCCESS) { |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 80 | printk(BIOS_ERR, "PTN3460 error: Unable to get EDID data from mainboard.\n"); |
| 81 | return; |
| 82 | } |
| 83 | |
| 84 | /* Mainboard decides which EDID table has to be used. */ |
Jan Samek | a3b29d7 | 2023-01-31 14:09:30 +0100 | [diff] [blame] | 85 | edid_tab = mainboard_ptn3460_select_edid_table(); |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 86 | if (edid_tab > PTN_MAX_EDID_NUM) { |
| 87 | printk(BIOS_ERR, "PTN3460 error: invalid EDID table (%d) selected.\n", |
| 88 | edid_tab); |
| 89 | return; |
| 90 | } |
| 91 | /* Write EDID data into PTN. */ |
| 92 | val = ptn3460_write_edid(dev, edid_tab, edid_data); |
| 93 | if (val != PTN_SUCCESS) { |
| 94 | printk(BIOS_ERR, "PTN3460 error: writing EDID data into device failed.\n"); |
| 95 | return; |
| 96 | } |
| 97 | /* Activate the selected EDID block. */ |
| 98 | ptn_select_edid(dev, edid_tab); |
| 99 | /* Read out PTN configuration data. */ |
| 100 | for (i = 0; i < sizeof(struct ptn_3460_config); i++) { |
| 101 | val = i2c_dev_readb_at(dev, PTN_CONFIG_OFF + i); |
| 102 | if (val < 0) { |
| 103 | printk(BIOS_ERR, |
| 104 | "PTN3460 error: Unable to read config data from device.\n"); |
| 105 | return; |
| 106 | } |
| 107 | *ptr++ = (uint8_t)val; /* fill config structure via ptr */ |
| 108 | } |
| 109 | /* Mainboard can modify the configuration data. |
| 110 | Write back configuration data to PTN3460 if modified by mainboard */ |
Jan Samek | a3b29d7 | 2023-01-31 14:09:30 +0100 | [diff] [blame] | 111 | if (mainboard_ptn3460_config(&cfg) == CB_SUCCESS) { |
Elyes Haouas | 1ef547e | 2022-11-18 15:05:39 +0100 | [diff] [blame] | 112 | ptr = (uint8_t *)&cfg; |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 113 | for (i = 0; i < sizeof(struct ptn_3460_config); i++) { |
| 114 | val = i2c_dev_writeb_at(dev, PTN_CONFIG_OFF + i, *ptr++); |
| 115 | if (val < 0) { |
| 116 | printk(BIOS_ERR, |
| 117 | "PTN3460 error: Unable to write config data.\n"); |
| 118 | return; |
| 119 | } |
| 120 | } |
| 121 | } |
Jan Samek | 6691844 | 2022-09-15 16:31:44 +0200 | [diff] [blame] | 122 | |
| 123 | init_done = true; |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 124 | } |
| 125 | |
Jan Samek | a3b29d7 | 2023-01-31 14:09:30 +0100 | [diff] [blame] | 126 | __weak enum cb_err mainboard_ptn3460_get_edid(uint8_t edid_data[PTN_EDID_LEN]) |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 127 | { |
| 128 | return CB_ERR; |
| 129 | } |
Jan Samek | a3b29d7 | 2023-01-31 14:09:30 +0100 | [diff] [blame] | 130 | __weak uint8_t mainboard_ptn3460_select_edid_table(void) |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 131 | { |
| 132 | return 0; |
| 133 | } |
Jan Samek | a3b29d7 | 2023-01-31 14:09:30 +0100 | [diff] [blame] | 134 | __weak enum cb_err mainboard_ptn3460_config(struct ptn_3460_config *cfg_ptr) |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 135 | { |
Jan Samek | 79312af | 2023-01-18 13:28:50 +0100 | [diff] [blame] | 136 | return CB_ERR; |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 137 | } |
| 138 | |
| 139 | static struct device_operations ptn3460_ops = { |
Nico Huber | 2f8ba69 | 2020-04-05 14:05:24 +0200 | [diff] [blame] | 140 | .read_resources = noop_read_resources, |
| 141 | .set_resources = noop_set_resources, |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 142 | .init = ptn3460_init, |
Uwe Poeche | 11a34ec | 2019-10-28 11:28:50 +0100 | [diff] [blame] | 143 | }; |
| 144 | |
| 145 | static void ptn3460_enable(struct device *dev) |
| 146 | { |
| 147 | dev->ops = &ptn3460_ops; |
| 148 | } |
| 149 | |
| 150 | struct chip_operations drivers_i2c_ptn3460_ops = { |
| 151 | CHIP_NAME("PTN3460") |
| 152 | .enable_dev = ptn3460_enable |
| 153 | }; |
Jan Samek | 6691844 | 2022-09-15 16:31:44 +0200 | [diff] [blame] | 154 | |
| 155 | #if CONFIG(PTN3460_EARLY_INIT) |
| 156 | |
| 157 | /** |
| 158 | * \brief This function provides a callback for the boot state machine to initialize the |
| 159 | * PTN3460 DP-to-LVDS bridge before graphics initialization in order for the bootsplash |
| 160 | * logo to be shown. |
| 161 | * @param *unused Unused argument for the callback. |
| 162 | */ |
| 163 | |
| 164 | static void ptn3460_early_init(void *unused) |
| 165 | { |
| 166 | struct device *ptn_dev; |
| 167 | |
| 168 | printk(BIOS_DEBUG, "Attempting PTN3460 early init.\n"); |
| 169 | ptn_dev = dev_find_slot_on_smbus(0, CONFIG_PTN3460_EARLY_ADDR); |
| 170 | if (!ptn_dev) { |
| 171 | printk(BIOS_ERR, "Failed to find the PTN3460 device!\n"); |
| 172 | return; |
| 173 | } |
Werner Zeh | a1a3be1 | 2022-12-22 09:25:07 +0100 | [diff] [blame] | 174 | /* Initialize the I2C controller before it is used. */ |
| 175 | if (ptn_dev->bus && ptn_dev->bus->dev->ops && ptn_dev->bus->dev->ops->init) |
| 176 | ptn_dev->bus->dev->ops->init(ptn_dev->bus->dev); |
Jan Samek | 6691844 | 2022-09-15 16:31:44 +0200 | [diff] [blame] | 177 | ptn3460_init(ptn_dev); |
| 178 | } |
| 179 | |
| 180 | BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_ENTRY, ptn3460_early_init, NULL); |
| 181 | |
| 182 | #endif /* CONFIG(PTN3460_EARLY_INIT) */ |