Kyösti Mälkki | e8b4da2 | 2014-10-21 18:22:32 +0300 | [diff] [blame] | 1 | /* |
| 2 | * This file is part of the coreboot project. |
| 3 | * |
| 4 | * Copyright (C) 2010 Advanced Micro Devices, Inc. |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; version 2 of the License. |
| 9 | * |
| 10 | * This program is distributed in the hope that it will be useful, |
| 11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | * GNU General Public License for more details. |
| 14 | * |
| 15 | * You should have received a copy of the GNU General Public License |
| 16 | * along with this program; if not, write to the Free Software |
Patrick Georgi | b890a12 | 2015-03-26 15:17:45 +0100 | [diff] [blame] | 17 | * Foundation, Inc. |
Kyösti Mälkki | e8b4da2 | 2014-10-21 18:22:32 +0300 | [diff] [blame] | 18 | */ |
| 19 | |
| 20 | #include <console/console.h> |
| 21 | #include <device/device.h> |
| 22 | #include <delay.h> |
| 23 | #include <device/pci.h> |
| 24 | #include <device/pci_ids.h> |
| 25 | #include <device/pci_ops.h> |
| 26 | #include <arch/io.h> |
| 27 | #include "hudson.h" |
| 28 | |
| 29 | |
| 30 | static void sata_init(struct device *dev) |
| 31 | { |
Dave Frodin | 6b31431 | 2015-01-20 14:37:02 -0700 | [diff] [blame] | 32 | #if IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_PI_AVALON) |
Kyösti Mälkki | e8b4da2 | 2014-10-21 18:22:32 +0300 | [diff] [blame] | 33 | /************************************** |
| 34 | * Configure the SATA port multiplier * |
| 35 | **************************************/ |
| 36 | #define BYTE_TO_DWORD_OFFSET(x) (x/4) |
| 37 | #define AHCI_BASE_ADDRESS_REG 0x24 |
| 38 | #define MISC_CONTROL_REG 0x40 |
| 39 | #define UNLOCK_BIT (1<<0) |
| 40 | #define SATA_CAPABILITIES_REG 0xFC |
| 41 | #define CFG_CAP_SPM (1<<12) |
| 42 | |
| 43 | volatile u32 *ahci_ptr = |
| 44 | (u32*)(pci_read_config32(dev, AHCI_BASE_ADDRESS_REG) & 0xFFFFFF00); |
| 45 | u32 temp; |
| 46 | |
| 47 | /* unlock the write-protect */ |
| 48 | temp = pci_read_config32(dev, MISC_CONTROL_REG); |
| 49 | temp |= UNLOCK_BIT; |
| 50 | pci_write_config32(dev, MISC_CONTROL_REG, temp); |
| 51 | |
| 52 | /* set the SATA AHCI mode to allow port expanders */ |
| 53 | *(ahci_ptr + BYTE_TO_DWORD_OFFSET(SATA_CAPABILITIES_REG)) |= CFG_CAP_SPM; |
| 54 | |
| 55 | /* lock the write-protect */ |
| 56 | temp = pci_read_config32(dev, MISC_CONTROL_REG); |
| 57 | temp &= ~UNLOCK_BIT; |
| 58 | pci_write_config32(dev, MISC_CONTROL_REG, temp); |
| 59 | #endif |
| 60 | }; |
| 61 | |
| 62 | static struct pci_operations lops_pci = { |
| 63 | /* .set_subsystem = pci_dev_set_subsystem, */ |
| 64 | }; |
| 65 | |
| 66 | static struct device_operations sata_ops = { |
| 67 | .read_resources = pci_dev_read_resources, |
| 68 | .set_resources = pci_dev_set_resources, |
| 69 | .enable_resources = pci_dev_enable_resources, |
| 70 | .init = sata_init, |
| 71 | .scan_bus = 0, |
| 72 | .ops_pci = &lops_pci, |
| 73 | }; |
| 74 | |
| 75 | static const struct pci_driver sata0_driver __pci_driver = { |
| 76 | .ops = &sata_ops, |
| 77 | .vendor = PCI_VENDOR_ID_AMD, |
| 78 | .device = PCI_DEVICE_ID_ATI_SB900_SATA, |
| 79 | }; |
| 80 | |
| 81 | static const struct pci_driver sata0_driver_ahci __pci_driver = { |
| 82 | .ops = &sata_ops, |
| 83 | .vendor = PCI_VENDOR_ID_AMD, |
| 84 | .device = PCI_DEVICE_ID_ATI_SB900_SATA_AHCI, |
| 85 | }; |