src/mainboard/intel/mtlrvp/variants/baseboard/mtlrvp_p/devicetree.cb

chip soc/intel/meteorlake

	# GPE configuration
	register "pmc_gpe0_dw0" = "GPP_B"
	register "pmc_gpe0_dw1" = "GPP_D"
	register "pmc_gpe0_dw2" = "GPP_E"

	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
	register "gen1_dec" = "0x00fc0801"
	register "gen2_dec" = "0x000c0201"
	# EC memory map range is 0x900-0x9ff
	register "gen3_dec" = "0x00fc0901"

	device domain 0 on
		device ref igpu on end
		device ref heci1 on end
		device ref tbt_pcie_rp0 on end
		device ref tbt_pcie_rp1 on end
		device ref tbt_pcie_rp2 on end
		device ref tbt_pcie_rp3 on end
		device ref tcss_xhci on end
		device ref tcss_dma0 on end
		device ref tcss_dma1 on end
		device ref pcie_rp10 on
			# Enable SSD Gen4 PCIE 10 using CLK 8
			register "pcie_rp[PCIE_RP(10)]" = "{
				.clk_src = 8,
				.clk_req = 8,
				.flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR,
			}"
		end # PCIE10 SSD Gen4
		device ref pcie_rp11 on
			# Enable SSD Gen4 PCIE 11 using CLK 7
			register "pcie_rp[PCIE_RP(11)]" = "{
				.clk_src = 7,
				.clk_req = 7,
				.flags = PCIE_RP_CLK_REQ_DETECT | PCIE_RP_LTR,
			}"
		end # PCIE11 SSD Gen4
		device ref xhci on end
		device ref i2c0 on end
		device ref i2c1 on end
		device ref i2c2 on end
		device ref i2c3 on end
		device ref i2c4 on end
		device ref i2c5 on end
		device ref shared_sram on end
		device ref uart0 on end
		device ref smbus on end
	end
end