Patrick Georgi | 36ade67 | 2011-01-28 07:56:39 +0000 | [diff] [blame] | 1 | /*****************************************************************************\ |
| 2 | * lbtable.c |
| 3 | ***************************************************************************** |
| 4 | * Copyright (C) 2002-2005 The Regents of the University of California. |
| 5 | * Produced at the Lawrence Livermore National Laboratory. |
| 6 | * Written by Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com> |
| 7 | * and Stefan Reinauer <stepan@openbios.org>. |
| 8 | * UCRL-CODE-2003-012 |
| 9 | * All rights reserved. |
| 10 | * |
| 11 | * This file is part of nvramtool, a utility for reading/writing coreboot |
| 12 | * parameters and displaying information from the coreboot table. |
| 13 | * For details, see http://coreboot.org/nvramtool. |
| 14 | * |
| 15 | * Please also read the file DISCLAIMER which is included in this software |
| 16 | * distribution. |
| 17 | * |
| 18 | * This program is free software; you can redistribute it and/or modify it |
| 19 | * under the terms of the GNU General Public License (as published by the |
| 20 | * Free Software Foundation) version 2, dated June 1991. |
| 21 | * |
| 22 | * This program is distributed in the hope that it will be useful, but |
| 23 | * WITHOUT ANY WARRANTY; without even the IMPLIED WARRANTY OF |
| 24 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the terms and |
| 25 | * conditions of the GNU General Public License for more details. |
| 26 | * |
| 27 | * You should have received a copy of the GNU General Public License along |
| 28 | * with this program; if not, write to the Free Software Foundation, Inc., |
| 29 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| 30 | \*****************************************************************************/ |
| 31 | |
| 32 | #include <arpa/inet.h> |
| 33 | #include <string.h> |
| 34 | #include <sys/mman.h> |
| 35 | #include "common.h" |
| 36 | #include "coreboot_tables.h" |
| 37 | #include "ip_checksum.h" |
| 38 | #include "lbtable.h" |
| 39 | #include "layout.h" |
| 40 | #include "cmos_lowlevel.h" |
| 41 | #include "hexdump.h" |
| 42 | #include "cbfs.h" |
| 43 | |
| 44 | static void process_cmos_table(void); |
| 45 | static void get_cmos_checksum_info(void); |
| 46 | static void try_convert_checksum_layout(cmos_checksum_layout_t * layout); |
| 47 | static void try_add_cmos_table_enum(cmos_enum_t * cmos_enum); |
| 48 | static void try_add_cmos_table_entry(cmos_entry_t * cmos_entry); |
| 49 | static const struct cmos_entries *first_cmos_table_entry(void); |
| 50 | static const struct cmos_entries *next_cmos_table_entry(const struct |
| 51 | cmos_entries *last); |
| 52 | static const struct cmos_enums *first_cmos_table_enum(void); |
| 53 | static const struct cmos_enums *next_cmos_table_enum |
| 54 | (const struct cmos_enums *last); |
| 55 | static const struct lb_record *first_cmos_rec(uint32_t tag); |
| 56 | static const struct lb_record *next_cmos_rec(const struct lb_record *last, |
| 57 | uint32_t tag); |
| 58 | |
| 59 | /* The CMOS option table is located within the coreboot table. It tells us |
| 60 | * where the CMOS parameters are located in the nonvolatile RAM. |
| 61 | */ |
| 62 | static const struct cmos_option_table *cmos_table = NULL; |
| 63 | |
| 64 | void process_layout(void) |
| 65 | { |
| 66 | if ((cmos_table) == NULL) { |
| 67 | fprintf(stderr, |
| 68 | "%s: CMOS option table not found in coreboot table. " |
| 69 | "Apparently, the coreboot installed on this system was " |
| 70 | "built without specifying CONFIG_HAVE_OPTION_TABLE.\n", |
| 71 | prog_name); |
| 72 | exit(1); |
| 73 | } |
| 74 | |
| 75 | process_cmos_table(); |
| 76 | get_cmos_checksum_info(); |
| 77 | } |
| 78 | |
| 79 | void get_layout_from_cbfs_file(void) |
| 80 | { |
| 81 | uint32_t len; |
| 82 | cmos_table = cbfs_find_file("cmos_layout.bin", CBFS_COMPONENT_CMOS_LAYOUT, &len); |
| 83 | process_layout(); |
| 84 | } |
| 85 | |
| 86 | /**************************************************************************** |
Mathias Krause | 155c379 | 2011-03-10 07:52:02 +0000 | [diff] [blame] | 87 | * get_layout_from_cmos_table |
| 88 | * |
| 89 | * Find the CMOS table which is stored within the coreboot table and set the |
| 90 | * global variable cmos_table to point to it. |
| 91 | ****************************************************************************/ |
| 92 | void get_layout_from_cmos_table(void) |
| 93 | { |
| 94 | get_lbtable(); |
| 95 | cmos_table = (const struct cmos_option_table *) |
| 96 | find_lbrec(LB_TAG_CMOS_OPTION_TABLE); |
| 97 | process_layout(); |
| 98 | } |
| 99 | |
| 100 | /**************************************************************************** |
Patrick Georgi | 36ade67 | 2011-01-28 07:56:39 +0000 | [diff] [blame] | 101 | * process_cmos_table |
| 102 | * |
| 103 | * Extract layout information from the CMOS option table and store it in our |
| 104 | * internal repository. |
| 105 | ****************************************************************************/ |
| 106 | static void process_cmos_table(void) |
| 107 | { |
| 108 | const struct cmos_enums *p; |
| 109 | const struct cmos_entries *q; |
| 110 | cmos_enum_t cmos_enum; |
| 111 | cmos_entry_t cmos_entry; |
| 112 | |
| 113 | /* First add the enums. */ |
| 114 | for (p = first_cmos_table_enum(); p != NULL; |
| 115 | p = next_cmos_table_enum(p)) { |
| 116 | cmos_enum.config_id = p->config_id; |
| 117 | cmos_enum.value = p->value; |
| 118 | strncpy(cmos_enum.text, (char *)p->text, CMOS_MAX_TEXT_LENGTH); |
| 119 | cmos_enum.text[CMOS_MAX_TEXT_LENGTH] = '\0'; |
| 120 | try_add_cmos_table_enum(&cmos_enum); |
| 121 | } |
| 122 | |
| 123 | /* Now add the entries. We must add the entries after the enums because |
| 124 | * the entries are sanity checked against the enums as they are added. |
| 125 | */ |
| 126 | for (q = first_cmos_table_entry(); q != NULL; |
| 127 | q = next_cmos_table_entry(q)) { |
| 128 | cmos_entry.bit = q->bit; |
| 129 | cmos_entry.length = q->length; |
| 130 | |
| 131 | switch (q->config) { |
| 132 | case 'e': |
| 133 | cmos_entry.config = CMOS_ENTRY_ENUM; |
| 134 | break; |
| 135 | |
| 136 | case 'h': |
| 137 | cmos_entry.config = CMOS_ENTRY_HEX; |
| 138 | break; |
| 139 | |
| 140 | case 'r': |
| 141 | cmos_entry.config = CMOS_ENTRY_RESERVED; |
| 142 | break; |
| 143 | |
| 144 | case 's': |
| 145 | cmos_entry.config = CMOS_ENTRY_STRING; |
| 146 | break; |
| 147 | |
| 148 | default: |
| 149 | fprintf(stderr, |
| 150 | "%s: Entry in CMOS option table has unknown config " |
| 151 | "value.\n", prog_name); |
| 152 | exit(1); |
| 153 | } |
| 154 | |
| 155 | cmos_entry.config_id = q->config_id; |
| 156 | strncpy(cmos_entry.name, (char *)q->name, CMOS_MAX_NAME_LENGTH); |
| 157 | cmos_entry.name[CMOS_MAX_NAME_LENGTH] = '\0'; |
| 158 | try_add_cmos_table_entry(&cmos_entry); |
| 159 | } |
| 160 | } |
| 161 | |
| 162 | /**************************************************************************** |
| 163 | * get_cmos_checksum_info |
| 164 | * |
| 165 | * Get layout information for CMOS checksum. |
| 166 | ****************************************************************************/ |
| 167 | static void get_cmos_checksum_info(void) |
| 168 | { |
| 169 | const cmos_entry_t *e; |
| 170 | struct cmos_checksum *checksum; |
| 171 | cmos_checksum_layout_t layout; |
| 172 | unsigned index, index2; |
| 173 | |
| 174 | checksum = (struct cmos_checksum *)next_cmos_rec((const struct lb_record *)first_cmos_table_enum(), LB_TAG_OPTION_CHECKSUM); |
| 175 | |
| 176 | if (checksum != NULL) { /* We are lucky. The coreboot table hints us to the checksum. |
| 177 | * We might have to check the type field here though. |
| 178 | */ |
| 179 | layout.summed_area_start = checksum->range_start; |
| 180 | layout.summed_area_end = checksum->range_end; |
| 181 | layout.checksum_at = checksum->location; |
| 182 | try_convert_checksum_layout(&layout); |
| 183 | cmos_checksum_start = layout.summed_area_start; |
| 184 | cmos_checksum_end = layout.summed_area_end; |
| 185 | cmos_checksum_index = layout.checksum_at; |
| 186 | return; |
| 187 | } |
| 188 | |
| 189 | if ((e = find_cmos_entry(checksum_param_name)) == NULL) |
| 190 | return; |
| 191 | |
| 192 | /* If we get here, we are unlucky. The CMOS option table contains the |
| 193 | * location of the CMOS checksum. However, there is no information |
| 194 | * regarding which bytes of the CMOS area the checksum is computed over. |
| 195 | * Thus we have to hope our presets will be fine. |
| 196 | */ |
| 197 | |
| 198 | if (e->bit % 8) { |
| 199 | fprintf(stderr, |
| 200 | "%s: Error: CMOS checksum is not byte-aligned.\n", |
| 201 | prog_name); |
| 202 | exit(1); |
| 203 | } |
| 204 | |
| 205 | index = e->bit / 8; |
| 206 | index2 = index + 1; /* The CMOS checksum occupies 16 bits. */ |
| 207 | |
| 208 | if (verify_cmos_byte_index(index) || verify_cmos_byte_index(index2)) { |
| 209 | fprintf(stderr, |
| 210 | "%s: Error: CMOS checksum location out of range.\n", |
| 211 | prog_name); |
| 212 | exit(1); |
| 213 | } |
| 214 | |
| 215 | if (((index >= cmos_checksum_start) && (index <= cmos_checksum_end)) || |
| 216 | (((index2) >= cmos_checksum_start) |
| 217 | && ((index2) <= cmos_checksum_end))) { |
| 218 | fprintf(stderr, |
| 219 | "%s: Error: CMOS checksum overlaps checksummed area.\n", |
| 220 | prog_name); |
| 221 | exit(1); |
| 222 | } |
| 223 | |
| 224 | cmos_checksum_index = index; |
| 225 | } |
| 226 | |
| 227 | /**************************************************************************** |
| 228 | * try_convert_checksum_layout |
| 229 | * |
| 230 | * Perform sanity checking on CMOS checksum layout information and attempt to |
| 231 | * convert information from bit positions to byte positions. Return OK on |
| 232 | * success or an error code on failure. |
| 233 | ****************************************************************************/ |
| 234 | static void try_convert_checksum_layout(cmos_checksum_layout_t * layout) |
| 235 | { |
| 236 | switch (checksum_layout_to_bytes(layout)) { |
| 237 | case OK: |
| 238 | return; |
| 239 | |
| 240 | case LAYOUT_SUMMED_AREA_START_NOT_ALIGNED: |
| 241 | fprintf(stderr, |
| 242 | "%s: CMOS checksummed area start is not byte-aligned.\n", |
| 243 | prog_name); |
| 244 | break; |
| 245 | |
| 246 | case LAYOUT_SUMMED_AREA_END_NOT_ALIGNED: |
| 247 | fprintf(stderr, |
| 248 | "%s: CMOS checksummed area end is not byte-aligned.\n", |
| 249 | prog_name); |
| 250 | break; |
| 251 | |
| 252 | case LAYOUT_CHECKSUM_LOCATION_NOT_ALIGNED: |
| 253 | fprintf(stderr, |
| 254 | "%s: CMOS checksum location is not byte-aligned.\n", |
| 255 | prog_name); |
| 256 | break; |
| 257 | |
| 258 | case LAYOUT_INVALID_SUMMED_AREA: |
| 259 | fprintf(stderr, |
| 260 | "%s: CMOS checksummed area end must be greater than " |
| 261 | "CMOS checksummed area start.\n", prog_name); |
| 262 | break; |
| 263 | |
| 264 | case LAYOUT_CHECKSUM_OVERLAPS_SUMMED_AREA: |
| 265 | fprintf(stderr, |
| 266 | "%s: CMOS checksum overlaps checksummed area.\n", |
| 267 | prog_name); |
| 268 | break; |
| 269 | |
| 270 | case LAYOUT_SUMMED_AREA_OUT_OF_RANGE: |
| 271 | fprintf(stderr, |
| 272 | "%s: CMOS checksummed area out of range.\n", prog_name); |
| 273 | break; |
| 274 | |
| 275 | case LAYOUT_CHECKSUM_LOCATION_OUT_OF_RANGE: |
| 276 | fprintf(stderr, |
| 277 | "%s: CMOS checksum location out of range.\n", |
| 278 | prog_name); |
| 279 | break; |
| 280 | |
| 281 | default: |
| 282 | BUG(); |
| 283 | } |
| 284 | |
| 285 | exit(1); |
| 286 | } |
| 287 | |
| 288 | /**************************************************************************** |
| 289 | * try_add_cmos_table_enum |
| 290 | * |
| 291 | * Attempt to add a CMOS enum to our internal repository. Exit with an error |
| 292 | * message on failure. |
| 293 | ****************************************************************************/ |
| 294 | static void try_add_cmos_table_enum(cmos_enum_t * cmos_enum) |
| 295 | { |
| 296 | switch (add_cmos_enum(cmos_enum)) { |
| 297 | case OK: |
| 298 | return; |
| 299 | |
| 300 | case LAYOUT_DUPLICATE_ENUM: |
| 301 | fprintf(stderr, "%s: Duplicate enum %s found in CMOS option " |
| 302 | "table.\n", prog_name, cmos_enum->text); |
| 303 | break; |
| 304 | |
| 305 | default: |
| 306 | BUG(); |
| 307 | } |
| 308 | |
| 309 | exit(1); |
| 310 | } |
| 311 | |
| 312 | /**************************************************************************** |
| 313 | * try_add_cmos_table_entry |
| 314 | * |
| 315 | * Attempt to add a CMOS entry to our internal repository. Exit with an |
| 316 | * error message on failure. |
| 317 | ****************************************************************************/ |
| 318 | static void try_add_cmos_table_entry(cmos_entry_t * cmos_entry) |
| 319 | { |
| 320 | const cmos_entry_t *conflict; |
| 321 | |
| 322 | switch (add_cmos_entry(cmos_entry, &conflict)) { |
| 323 | case OK: |
| 324 | return; |
| 325 | |
| 326 | case CMOS_AREA_OUT_OF_RANGE: |
| 327 | fprintf(stderr, |
| 328 | "%s: Bad CMOS option layout in CMOS option table entry " |
| 329 | "%s.\n", prog_name, cmos_entry->name); |
| 330 | break; |
| 331 | |
| 332 | case CMOS_AREA_TOO_WIDE: |
| 333 | fprintf(stderr, |
| 334 | "%s: Area too wide for CMOS option table entry %s.\n", |
| 335 | prog_name, cmos_entry->name); |
| 336 | break; |
| 337 | |
| 338 | case LAYOUT_ENTRY_OVERLAP: |
| 339 | fprintf(stderr, |
| 340 | "%s: CMOS option table entries %s and %s have overlapping " |
| 341 | "layouts.\n", prog_name, cmos_entry->name, |
| 342 | conflict->name); |
| 343 | break; |
| 344 | |
| 345 | case LAYOUT_ENTRY_BAD_LENGTH: |
| 346 | /* Silently ignore entries with zero length. Although this should |
| 347 | * never happen in practice, we should handle the case in a |
| 348 | * reasonable manner just to be safe. |
| 349 | */ |
| 350 | return; |
| 351 | |
| 352 | default: |
| 353 | BUG(); |
| 354 | } |
| 355 | |
| 356 | exit(1); |
| 357 | } |
| 358 | |
| 359 | /**************************************************************************** |
| 360 | * first_cmos_table_entry |
| 361 | * |
| 362 | * Return a pointer to the first entry in the CMOS table that represents a |
| 363 | * CMOS parameter. Return NULL if CMOS table is empty. |
| 364 | ****************************************************************************/ |
| 365 | static const struct cmos_entries *first_cmos_table_entry(void) |
| 366 | { |
| 367 | return (const struct cmos_entries *)first_cmos_rec(LB_TAG_OPTION); |
| 368 | } |
| 369 | |
| 370 | /**************************************************************************** |
| 371 | * next_cmos_table_entry |
| 372 | * |
| 373 | * Return a pointer to the next entry after 'last' in the CMOS table that |
| 374 | * represents a CMOS parameter. Return NULL if there are no more parameters. |
| 375 | ****************************************************************************/ |
| 376 | static const struct cmos_entries *next_cmos_table_entry(const struct |
| 377 | cmos_entries *last) |
| 378 | { |
| 379 | return (const struct cmos_entries *) |
| 380 | next_cmos_rec((const struct lb_record *)last, LB_TAG_OPTION); |
| 381 | } |
| 382 | |
| 383 | /**************************************************************************** |
| 384 | * first_cmos_table_enum |
| 385 | * |
| 386 | * Return a pointer to the first entry in the CMOS table that represents a |
| 387 | * possible CMOS parameter value. Return NULL if the table does not contain |
| 388 | * any such entries. |
| 389 | ****************************************************************************/ |
| 390 | static const struct cmos_enums *first_cmos_table_enum(void) |
| 391 | { |
| 392 | return (const struct cmos_enums *)first_cmos_rec(LB_TAG_OPTION_ENUM); |
| 393 | } |
| 394 | |
| 395 | /**************************************************************************** |
| 396 | * next_cmos_table_enum |
| 397 | * |
| 398 | * Return a pointer to the next entry after 'last' in the CMOS table that |
| 399 | * represents a possible CMOS parameter value. Return NULL if there are no |
| 400 | * more parameter values. |
| 401 | ****************************************************************************/ |
| 402 | static const struct cmos_enums *next_cmos_table_enum |
| 403 | (const struct cmos_enums *last) { |
| 404 | return (const struct cmos_enums *) |
| 405 | next_cmos_rec((const struct lb_record *)last, LB_TAG_OPTION_ENUM); |
| 406 | } |
| 407 | |
| 408 | /**************************************************************************** |
| 409 | * first_cmos_rec |
| 410 | * |
| 411 | * Return a pointer to the first entry in the CMOS table whose type matches |
| 412 | * 'tag'. Return NULL if CMOS table contains no such entry. |
| 413 | * |
| 414 | * Possible values for 'tag' are as follows: |
| 415 | * |
| 416 | * LB_TAG_OPTION: The entry represents a CMOS parameter. |
| 417 | * LB_TAG_OPTION_ENUM: The entry represents a possible value for a CMOS |
| 418 | * parameter of type 'enum'. |
| 419 | * |
| 420 | * The CMOS table tells us where in the nonvolatile RAM to look for CMOS |
| 421 | * parameter values and specifies their types as 'enum', 'hex', or |
| 422 | * 'reserved'. |
| 423 | ****************************************************************************/ |
| 424 | static const struct lb_record *first_cmos_rec(uint32_t tag) |
| 425 | { |
| 426 | const char *p; |
| 427 | uint32_t bytes_processed, bytes_for_entries; |
| 428 | const struct lb_record *lbrec; |
| 429 | |
| 430 | p = ((const char *)cmos_table) + cmos_table->header_length; |
| 431 | bytes_for_entries = cmos_table->size - cmos_table->header_length; |
| 432 | |
| 433 | for (bytes_processed = 0; |
| 434 | bytes_processed < bytes_for_entries; |
| 435 | bytes_processed += lbrec->size) { |
| 436 | lbrec = (const struct lb_record *)&p[bytes_processed]; |
| 437 | |
| 438 | if (lbrec->tag == tag) |
| 439 | return lbrec; |
| 440 | } |
| 441 | |
| 442 | return NULL; |
| 443 | } |
| 444 | |
| 445 | /**************************************************************************** |
| 446 | * next_cmos_rec |
| 447 | * |
| 448 | * Return a pointer to the next entry after 'last' in the CMOS table whose |
| 449 | * type matches 'tag'. Return NULL if the table contains no more entries of |
| 450 | * this type. |
| 451 | ****************************************************************************/ |
| 452 | static const struct lb_record *next_cmos_rec(const struct lb_record *last, |
| 453 | uint32_t tag) |
| 454 | { |
| 455 | const char *p; |
| 456 | uint32_t bytes_processed, bytes_for_entries, last_offset; |
| 457 | const struct lb_record *lbrec; |
| 458 | |
| 459 | p = ((const char *)cmos_table) + cmos_table->header_length; |
| 460 | bytes_for_entries = cmos_table->size - cmos_table->header_length; |
| 461 | last_offset = ((const char *)last) - p; |
| 462 | |
| 463 | for (bytes_processed = last_offset + last->size; |
| 464 | bytes_processed < bytes_for_entries; |
| 465 | bytes_processed += lbrec->size) { |
| 466 | lbrec = (const struct lb_record *)&p[bytes_processed]; |
| 467 | |
| 468 | if (lbrec->tag == tag) |
| 469 | return lbrec; |
| 470 | } |
| 471 | |
| 472 | return NULL; |
| 473 | } |
| 474 | |