Stefan Tauner | 47d6663 | 2016-05-02 23:16:57 +0200 | [diff] [blame] | 1 | #!/bin/bash |
| 2 | |
Patrick Georgi | 7333a11 | 2020-05-08 20:48:04 +0200 | [diff] [blame] | 3 | # SPDX-License-Identifier: GPL-2.0-only |
Stefan Tauner | 47d6663 | 2016-05-02 23:16:57 +0200 | [diff] [blame] | 4 | |
| 5 | LANG=C |
| 6 | # Some tools emit errors that don't matter (bugs in lspci/PCI firmware and lsusb). |
| 7 | # To shown them anyway (e.g. for debugging) comment next line. |
| 8 | exec 2>/dev/null |
| 9 | |
| 10 | if [ "$1" = "-h" ]; then |
| 11 | printf "Usage: $0 [-h | path to dmesg log] |
| 12 | |
| 13 | This script tries to find USB ports compatible with USB2/EHCI debug devices and |
| 14 | helps you to find their physical locations. To that end, attach at least one |
| 15 | uniquely identifiable device to a USB port and run this script. The device needs |
| 16 | to be visible in the output of \"lsusb -t\" (debug devices are often *not*!). |
| 17 | |
| 18 | After determining compatibility of the USB controllers the script will print the |
| 19 | devices attached to the debug port as shown by lsusb. If nothing shows up simply |
| 20 | switch ports and repeat the process. |
| 21 | |
| 22 | Note: usually only one port is supported for debugging.\n" |
| 23 | exit 0 |
| 24 | fi |
| 25 | uid=`id -u` |
| 26 | if [ "$uid" -ne 0 ]; then |
| 27 | echo "Must be run as root. Exiting." |
| 28 | exit 1 |
| 29 | fi |
| 30 | dmesgfile=$1 |
| 31 | |
| 32 | find_devs_in_tree () { |
| 33 | bus=$1 |
| 34 | port=$2 |
| 35 | busstr=`printf "Bus %02d" "$bus"` |
| 36 | portstr="Port $port" |
| 37 | |
| 38 | hubs_to_ignore="8087:0020 8087:0024" |
| 39 | reqlvl=1 |
| 40 | |
| 41 | found= |
| 42 | # Iterate over the output of lsusb -t because it contains the physical port numbers |
| 43 | while IFS='' read -r line; do |
| 44 | # We need to keep track of the current bus "branch" |
| 45 | # Look out for lines starting with /: (that indicate a bus) |
| 46 | if [ "${line#*/:}" != "$line" ]; then |
| 47 | if [ "${line#*$busstr}" != "$line" ]; then |
| 48 | cur_bus=$busstr |
| 49 | else |
| 50 | cur_bus= |
| 51 | fi |
| 52 | continue |
| 53 | fi |
| 54 | |
| 55 | # Skip all lines not belonging to the wanted bus number |
| 56 | if [ "$cur_bus" != "$busstr" ]; then |
| 57 | continue |
| 58 | fi |
| 59 | |
| 60 | # Calculate current USB tier/level |
| 61 | spaces="${line%%[!' ']*}" |
| 62 | curlvl=$((${#spaces} / 4)) |
| 63 | if [ $curlvl -ne $reqlvl ]; then |
| 64 | continue |
| 65 | fi |
| 66 | |
| 67 | # Fetch USB IDs of the current device |
| 68 | dev=`echo ${line#*Dev } | cut -d ',' -f 1` |
| 69 | lsusbline=`lsusb -s "$bus":"$dev"` |
| 70 | if [[ ! "$lsusbline" =~ .*([[:xdigit:]]{4}:[[:xdigit:]]{4}) ]]; then |
| 71 | printf "Unexpected output from \"%s\": \"%s\"\n" "lsusb -s $bus:$dev" "$usbline" |
| 72 | exit 1 |
| 73 | fi |
| 74 | ids=${BASH_REMATCH[1]} |
| 75 | |
| 76 | # Skip over rate matching hubs |
| 77 | if [[ "$hubs_to_ignore" == *"$ids"* ]]; then |
| 78 | ((reqlvl += 1)) |
| 79 | continue |
| 80 | fi |
| 81 | |
| 82 | # Check for matching physical USB port |
| 83 | if [ "${line#*$portstr}" != "$line" ]; then |
| 84 | echo "$lsusbline" |
| 85 | return |
| 86 | fi |
| 87 | done<< EOF |
| 88 | $(lsusb -t) |
| 89 | EOF |
| 90 | if [ -z "$found" ]; then |
| 91 | echo "none" |
| 92 | fi |
| 93 | } |
| 94 | |
| 95 | debug_lspci_devs=`lspci -nvvD | |
| 96 | grep -i "^[0-9a-f]\|debug port" | |
| 97 | grep -iB1 --no-group-separator "debug port" | |
| 98 | grep -vi "debug port" | |
| 99 | cut -f 1 -d" " | |
| 100 | sort | |
| 101 | xargs echo` |
| 102 | |
| 103 | if [ -z "$debug_lspci_devs" ]; then |
| 104 | printf "No USB controller with debug capability found by lspci.\n |
| 105 | Possible reasons: lspci too old, USB controller does not support a debug device, ... Exiting.\n" |
| 106 | exit 1 |
| 107 | fi |
| 108 | printf "The following PCI devices support a USB debug port (says lspci): $debug_lspci_devs\n" |
| 109 | |
| 110 | debug_dmesg_devs_with_port=`( test -z "$dmesgfile" && |
| 111 | dmesg || |
| 112 | cat "$dmesgfile") | |
| 113 | grep -i "ehci.*debug port" | |
| 114 | sed "s/.* \([0-9a-f]*:*[0-9a-f]\{2\}:[0-9a-f]\{2\}\.[0-9a-f]\).*ebug port /\1 /" | |
| 115 | sort` |
| 116 | |
| 117 | debug_dmesg_devs=`echo "$debug_dmesg_devs_with_port" | |
| 118 | cut -f 1 -d" " | |
| 119 | xargs echo` |
| 120 | |
| 121 | if [ -z "$debug_dmesg_devs" ]; then |
| 122 | printf "dmesg does not show any supported ports.\n |
| 123 | Possible reasons: dmesg scrolled off, kernel too old, USB controller does not support a debug device, ... Exiting.\n |
| 124 | Note: You can specify a file containing kernel messages as an argument to this program (e.g. /var/log/dmesg)." |
| 125 | exit 1 |
| 126 | fi |
| 127 | |
| 128 | if [ "$debug_lspci_devs" != "$debug_dmesg_devs" ]; then |
| 129 | echo "lspci and the kernel do not agree on USB debug device support. Exiting." |
| 130 | exit 1 |
| 131 | fi |
| 132 | |
| 133 | printf "and the kernel agrees, good.\n\n" |
| 134 | |
| 135 | while true; do |
| 136 | for dev in $debug_dmesg_devs; do |
| 137 | bus=`lsusb -v | |
| 138 | grep "^Bus\|iSerial.*" | |
| 139 | grep -B1 --no-group-separator "iSerial.*$dev" | |
| 140 | grep "^Bus" | |
| 141 | sed "s/Bus *0*\([0-9a-f]*\).*/\1/"` |
| 142 | port=`echo "$debug_dmesg_devs_with_port" | |
| 143 | grep "^$dev" | |
| 144 | cut -f 2 -d" "` |
| 145 | |
| 146 | echo "Device(s) currently connected to the debug-capable port $port on PCI device $dev, USB bus $bus:" |
| 147 | |
| 148 | find_devs_in_tree "$bus" "$port" |
| 149 | echo |
| 150 | done |
| 151 | |
| 152 | echo "Enter 'q' to abort or anything else to repeat" |
| 153 | read -r r |
| 154 | if [ $? -ne 0 -o "$r" = "q" ]; then |
| 155 | break; |
| 156 | fi |
| 157 | done |
| 158 | |
| 159 | exit 0 |