Angel Pons | a2ee761 | 2020-04-04 18:51:15 +0200 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0-only */ |
Angel Pons | a2ee761 | 2020-04-04 18:51:15 +0200 | [diff] [blame] | 2 | |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 3 | /* |
| 4 | * drivers/video/tegra/dc/dp.c |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 5 | */ |
Elyes HAOUAS | 3081855 | 2019-06-23 07:03:59 +0200 | [diff] [blame] | 6 | |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 7 | #include <console/console.h> |
| 8 | #include <device/device.h> |
Nico Huber | 0f2dd1e | 2017-08-01 14:02:40 +0200 | [diff] [blame] | 9 | #include <device/i2c_simple.h> |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 10 | #include <edid.h> |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 11 | #include <string.h> |
| 12 | #include <delay.h> |
| 13 | #include <soc/addressmap.h> |
| 14 | #include <soc/clock.h> |
| 15 | #include <soc/display.h> |
| 16 | #include <soc/nvidia/tegra/i2c.h> |
| 17 | #include <soc/nvidia/tegra/dc.h> |
| 18 | #include <soc/nvidia/tegra/types.h> |
| 19 | #include <soc/nvidia/tegra/pwm.h> |
| 20 | #include <soc/nvidia/tegra/displayport.h> |
| 21 | #include <soc/sor.h> |
Elyes HAOUAS | 3081855 | 2019-06-23 07:03:59 +0200 | [diff] [blame] | 22 | #include <types.h> |
| 23 | |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 24 | #include "chip.h" |
| 25 | |
| 26 | #define DO_FAST_LINK_TRAINING 0 |
| 27 | |
| 28 | struct tegra_dc dc_data; |
| 29 | |
| 30 | enum { |
| 31 | DP_LT_SUCCESS = 0, |
| 32 | DP_LT_FAILED = -1, |
| 33 | }; |
| 34 | |
| 35 | struct tegra_dc_dp_data dp_data; |
| 36 | |
| 37 | static inline u32 tegra_dpaux_readl(struct tegra_dc_dp_data *dp, u32 reg) |
| 38 | { |
| 39 | void *addr = dp->aux_base + (u32) (reg << 2); |
| 40 | u32 reg_val = READL(addr); |
| 41 | return reg_val; |
| 42 | } |
| 43 | |
| 44 | static inline void tegra_dpaux_writel(struct tegra_dc_dp_data *dp, |
| 45 | u32 reg, u32 val) |
| 46 | { |
| 47 | void *addr = dp->aux_base + (u32) (reg << 2); |
| 48 | WRITEL(val, addr); |
| 49 | } |
| 50 | |
| 51 | static inline u32 tegra_dc_dpaux_poll_register(struct tegra_dc_dp_data *dp, |
| 52 | u32 reg, u32 mask, u32 exp_val, |
| 53 | u32 poll_interval_us, |
| 54 | u32 timeout_us) |
| 55 | { |
| 56 | u32 reg_val = 0; |
| 57 | u32 temp = timeout_us; |
| 58 | |
| 59 | do { |
| 60 | udelay(poll_interval_us); |
| 61 | reg_val = tegra_dpaux_readl(dp, reg); |
| 62 | if (timeout_us > poll_interval_us) |
| 63 | timeout_us -= poll_interval_us; |
| 64 | else |
| 65 | break; |
| 66 | } while ((reg_val & mask) != exp_val); |
| 67 | |
| 68 | if ((reg_val & mask) == exp_val) |
| 69 | return 0; /* success */ |
| 70 | printk(BIOS_ERR, |
| 71 | "dpaux_poll_register 0x%x: timeout: " |
| 72 | "(reg_val)0x%08x & (mask)0x%08x != (exp_val)0x%08x\n", |
| 73 | reg, reg_val, mask, exp_val); |
| 74 | return temp; |
| 75 | } |
| 76 | |
| 77 | static inline int tegra_dpaux_wait_transaction(struct tegra_dc_dp_data *dp) |
| 78 | { |
| 79 | /* According to DP spec, each aux transaction needs to finish |
| 80 | within 40ms. */ |
| 81 | if (tegra_dc_dpaux_poll_register(dp, DPAUX_DP_AUXCTL, |
| 82 | DPAUX_DP_AUXCTL_TRANSACTREQ_MASK, |
| 83 | DPAUX_DP_AUXCTL_TRANSACTREQ_DONE, |
| 84 | 100, DP_AUX_TIMEOUT_MS * 1000) != 0) { |
| 85 | printk(BIOS_INFO, "dp: DPAUX transaction timeout\n"); |
| 86 | return -1; |
| 87 | } |
| 88 | return 0; |
| 89 | } |
| 90 | |
| 91 | static int tegra_dc_dpaux_write_chunk(struct tegra_dc_dp_data *dp, u32 cmd, |
| 92 | u32 addr, u8 *data, u32 *size, |
| 93 | u32 *aux_stat) |
| 94 | { |
| 95 | int i; |
| 96 | u32 reg_val; |
| 97 | u32 timeout_retries = DP_AUX_TIMEOUT_MAX_TRIES; |
| 98 | u32 defer_retries = DP_AUX_DEFER_MAX_TRIES; |
| 99 | u32 temp_data; |
| 100 | |
| 101 | if (*size > DP_AUX_MAX_BYTES) |
| 102 | return -1; /* only write one chunk of data */ |
| 103 | |
| 104 | /* Make sure the command is write command */ |
| 105 | switch (cmd) { |
| 106 | case DPAUX_DP_AUXCTL_CMD_I2CWR: |
| 107 | case DPAUX_DP_AUXCTL_CMD_MOTWR: |
| 108 | case DPAUX_DP_AUXCTL_CMD_AUXWR: |
| 109 | break; |
| 110 | default: |
| 111 | printk(BIOS_ERR, "dp: aux write cmd 0x%x is invalid\n", cmd); |
| 112 | return -1; |
| 113 | } |
| 114 | |
| 115 | tegra_dpaux_writel(dp, DPAUX_DP_AUXADDR, addr); |
| 116 | for (i = 0; i < DP_AUX_MAX_BYTES / 4; ++i) { |
| 117 | memcpy(&temp_data, data, 4); |
| 118 | tegra_dpaux_writel(dp, DPAUX_DP_AUXDATA_WRITE_W(i), temp_data); |
| 119 | data += 4; |
| 120 | } |
| 121 | |
| 122 | reg_val = tegra_dpaux_readl(dp, DPAUX_DP_AUXCTL); |
| 123 | reg_val &= ~DPAUX_DP_AUXCTL_CMD_MASK; |
| 124 | reg_val |= cmd; |
| 125 | reg_val &= ~DPAUX_DP_AUXCTL_CMDLEN_FIELD; |
| 126 | reg_val |= ((*size - 1) << DPAUX_DP_AUXCTL_CMDLEN_SHIFT); |
| 127 | |
| 128 | while ((timeout_retries > 0) && (defer_retries > 0)) { |
| 129 | if ((timeout_retries != DP_AUX_TIMEOUT_MAX_TRIES) || |
| 130 | (defer_retries != DP_AUX_DEFER_MAX_TRIES)) |
| 131 | udelay(1); |
| 132 | |
| 133 | reg_val |= DPAUX_DP_AUXCTL_TRANSACTREQ_PENDING; |
| 134 | tegra_dpaux_writel(dp, DPAUX_DP_AUXCTL, reg_val); |
| 135 | |
| 136 | if (tegra_dpaux_wait_transaction(dp)) |
| 137 | printk(BIOS_ERR, "dp: aux write transaction timeout\n"); |
| 138 | |
| 139 | *aux_stat = tegra_dpaux_readl(dp, DPAUX_DP_AUXSTAT); |
| 140 | |
| 141 | if ((*aux_stat & DPAUX_DP_AUXSTAT_TIMEOUT_ERROR_PENDING) || |
| 142 | (*aux_stat & DPAUX_DP_AUXSTAT_RX_ERROR_PENDING) || |
| 143 | (*aux_stat & DPAUX_DP_AUXSTAT_SINKSTAT_ERROR_PENDING) || |
| 144 | (*aux_stat & DPAUX_DP_AUXSTAT_NO_STOP_ERROR_PENDING)) { |
| 145 | if (timeout_retries-- > 0) { |
| 146 | printk(BIOS_INFO, "dp: aux write retry (0x%x)" |
| 147 | " -- %d\n", |
| 148 | *aux_stat, timeout_retries); |
| 149 | /* clear the error bits */ |
| 150 | tegra_dpaux_writel(dp, DPAUX_DP_AUXSTAT, |
| 151 | *aux_stat); |
| 152 | continue; |
| 153 | } else { |
| 154 | printk(BIOS_ERR, "dp: aux write got error" |
| 155 | " (0x%x)\n", *aux_stat); |
| 156 | return -1; |
| 157 | } |
| 158 | } |
| 159 | |
| 160 | if ((*aux_stat & DPAUX_DP_AUXSTAT_REPLYTYPE_I2CDEFER) || |
| 161 | (*aux_stat & DPAUX_DP_AUXSTAT_REPLYTYPE_DEFER)) { |
| 162 | if (defer_retries-- > 0) { |
| 163 | printk(BIOS_INFO, "dp: aux write defer (0x%x)" |
| 164 | " -- %d\n", *aux_stat, defer_retries); |
| 165 | /* clear the error bits */ |
| 166 | tegra_dpaux_writel(dp, DPAUX_DP_AUXSTAT, |
| 167 | *aux_stat); |
| 168 | continue; |
| 169 | } else { |
| 170 | printk(BIOS_ERR, "dp: aux write defer exceeds" |
| 171 | " max retries (0x%x)\n", *aux_stat); |
| 172 | return -1; |
| 173 | } |
| 174 | } |
| 175 | |
| 176 | if ((*aux_stat & DPAUX_DP_AUXSTAT_REPLYTYPE_MASK) == |
| 177 | DPAUX_DP_AUXSTAT_REPLYTYPE_ACK) { |
| 178 | *size = ((*aux_stat) & DPAUX_DP_AUXSTAT_REPLY_M_MASK); |
| 179 | return 0; |
| 180 | } else { |
| 181 | printk(BIOS_ERR, "dp: aux write failed (0x%x)\n", |
| 182 | *aux_stat); |
| 183 | return -1; |
| 184 | } |
| 185 | } |
| 186 | /* Should never come to here */ |
| 187 | return -1; |
| 188 | } |
| 189 | |
| 190 | static int tegra_dc_dpaux_read_chunk(struct tegra_dc_dp_data *dp, u32 cmd, |
| 191 | u32 addr, u8 *data, u32 *size, |
| 192 | u32 *aux_stat) |
| 193 | { |
| 194 | u32 reg_val; |
| 195 | u32 timeout_retries = DP_AUX_TIMEOUT_MAX_TRIES; |
| 196 | u32 defer_retries = DP_AUX_DEFER_MAX_TRIES; |
| 197 | |
| 198 | if (*size > DP_AUX_MAX_BYTES) |
| 199 | return -1; /* only read one chunk */ |
| 200 | |
| 201 | /* Check to make sure the command is read command */ |
| 202 | switch (cmd) { |
| 203 | case DPAUX_DP_AUXCTL_CMD_I2CRD: |
| 204 | case DPAUX_DP_AUXCTL_CMD_I2CREQWSTAT: |
| 205 | case DPAUX_DP_AUXCTL_CMD_MOTRD: |
| 206 | case DPAUX_DP_AUXCTL_CMD_AUXRD: |
| 207 | break; |
| 208 | default: |
| 209 | printk(BIOS_ERR, "dp: aux read cmd 0x%x is invalid\n", cmd); |
| 210 | return -1; |
| 211 | } |
| 212 | |
| 213 | *aux_stat = tegra_dpaux_readl(dp, DPAUX_DP_AUXSTAT); |
| 214 | if (!(*aux_stat & DPAUX_DP_AUXSTAT_HPD_STATUS_PLUGGED)) { |
| 215 | printk(BIOS_SPEW, "dp: HPD is not detected\n"); |
| 216 | return -1; |
| 217 | } |
| 218 | |
| 219 | tegra_dpaux_writel(dp, DPAUX_DP_AUXADDR, addr); |
| 220 | |
| 221 | reg_val = tegra_dpaux_readl(dp, DPAUX_DP_AUXCTL); |
| 222 | reg_val &= ~DPAUX_DP_AUXCTL_CMD_MASK; |
| 223 | reg_val |= cmd; |
| 224 | reg_val &= ~DPAUX_DP_AUXCTL_CMDLEN_FIELD; |
| 225 | reg_val |= ((*size - 1) << DPAUX_DP_AUXCTL_CMDLEN_SHIFT); |
| 226 | while ((timeout_retries > 0) && (defer_retries > 0)) { |
| 227 | if ((timeout_retries != DP_AUX_TIMEOUT_MAX_TRIES) || |
| 228 | (defer_retries != DP_AUX_DEFER_MAX_TRIES)) |
| 229 | udelay(DP_DPCP_RETRY_SLEEP_NS * 2); |
| 230 | |
| 231 | reg_val |= DPAUX_DP_AUXCTL_TRANSACTREQ_PENDING; |
| 232 | tegra_dpaux_writel(dp, DPAUX_DP_AUXCTL, reg_val); |
| 233 | |
| 234 | if (tegra_dpaux_wait_transaction(dp)) |
| 235 | printk(BIOS_INFO, "dp: aux read transaction timeout\n"); |
| 236 | |
| 237 | *aux_stat = tegra_dpaux_readl(dp, DPAUX_DP_AUXSTAT); |
| 238 | |
| 239 | if ((*aux_stat & DPAUX_DP_AUXSTAT_TIMEOUT_ERROR_PENDING) || |
| 240 | (*aux_stat & DPAUX_DP_AUXSTAT_RX_ERROR_PENDING) || |
| 241 | (*aux_stat & DPAUX_DP_AUXSTAT_SINKSTAT_ERROR_PENDING) || |
| 242 | (*aux_stat & DPAUX_DP_AUXSTAT_NO_STOP_ERROR_PENDING)) { |
| 243 | if (timeout_retries-- > 0) { |
| 244 | printk(BIOS_INFO, "dp: aux read retry (0x%x)" |
| 245 | " -- %d\n", *aux_stat, |
| 246 | timeout_retries); |
| 247 | /* clear the error bits */ |
| 248 | tegra_dpaux_writel(dp, DPAUX_DP_AUXSTAT, |
| 249 | *aux_stat); |
| 250 | continue; /* retry */ |
| 251 | } else { |
| 252 | printk(BIOS_ERR, "dp: aux read got error" |
| 253 | " (0x%x)\n", *aux_stat); |
| 254 | return -1; |
| 255 | } |
| 256 | } |
| 257 | |
| 258 | if ((*aux_stat & DPAUX_DP_AUXSTAT_REPLYTYPE_I2CDEFER) || |
| 259 | (*aux_stat & DPAUX_DP_AUXSTAT_REPLYTYPE_DEFER)) { |
| 260 | if (defer_retries-- > 0) { |
| 261 | printk(BIOS_INFO, "dp: aux read defer (0x%x)" |
| 262 | " -- %d\n", *aux_stat, defer_retries); |
| 263 | /* clear the error bits */ |
| 264 | tegra_dpaux_writel(dp, DPAUX_DP_AUXSTAT, |
| 265 | *aux_stat); |
| 266 | continue; |
| 267 | } else { |
| 268 | printk(BIOS_INFO, "dp: aux read defer exceeds" |
| 269 | " max retries (0x%x)\n", *aux_stat); |
| 270 | return -1; |
| 271 | } |
| 272 | } |
| 273 | |
| 274 | if ((*aux_stat & DPAUX_DP_AUXSTAT_REPLYTYPE_MASK) == |
| 275 | DPAUX_DP_AUXSTAT_REPLYTYPE_ACK) { |
| 276 | int i; |
| 277 | u32 temp_data[4]; |
| 278 | |
| 279 | for (i = 0; i < DP_AUX_MAX_BYTES / 4; ++i) |
| 280 | temp_data[i] = tegra_dpaux_readl(dp, |
| 281 | DPAUX_DP_AUXDATA_READ_W(i)); |
| 282 | |
| 283 | *size = ((*aux_stat) & DPAUX_DP_AUXSTAT_REPLY_M_MASK); |
| 284 | memcpy(data, temp_data, *size); |
| 285 | |
| 286 | return 0; |
| 287 | } else { |
| 288 | printk(BIOS_ERR, "dp: aux read failed (0x%x\n", |
| 289 | *aux_stat); |
| 290 | return -1; |
| 291 | } |
| 292 | } |
| 293 | /* Should never come to here */ |
| 294 | printk(BIOS_ERR, "%s: can't\n", __func__); |
| 295 | return -1; |
| 296 | } |
| 297 | |
| 298 | #if DO_FAST_LINK_TRAINING |
| 299 | static int tegra_dc_dpaux_read(struct tegra_dc_dp_data *dp, u32 cmd, u32 addr, |
| 300 | u8 *data, u32 *size, u32 *aux_stat) |
| 301 | { |
| 302 | u32 finished = 0; |
| 303 | u32 cur_size; |
| 304 | int ret = 0; |
| 305 | |
| 306 | do { |
| 307 | cur_size = *size - finished; |
| 308 | if (cur_size > DP_AUX_MAX_BYTES) |
| 309 | cur_size = DP_AUX_MAX_BYTES; |
| 310 | |
| 311 | ret = tegra_dc_dpaux_read_chunk(dp, cmd, addr, |
| 312 | data, &cur_size, aux_stat); |
| 313 | if (ret) |
| 314 | break; |
| 315 | |
| 316 | /* cur_size should be the real size returned */ |
| 317 | addr += cur_size; |
| 318 | data += cur_size; |
| 319 | finished += cur_size; |
| 320 | |
| 321 | } while (*size > finished); |
| 322 | |
| 323 | *size = finished; |
| 324 | return ret; |
| 325 | } |
| 326 | #endif /* DO_FAST_LINK_TRAINING */ |
| 327 | |
| 328 | static int tegra_dc_dp_dpcd_read(struct tegra_dc_dp_data *dp, u32 cmd, |
| 329 | u8 *data_ptr) |
| 330 | { |
| 331 | u32 size = 1; |
| 332 | u32 status = 0; |
| 333 | int ret; |
| 334 | |
| 335 | ret = tegra_dc_dpaux_read_chunk(dp, DPAUX_DP_AUXCTL_CMD_AUXRD, |
| 336 | cmd, data_ptr, &size, &status); |
| 337 | if (ret) |
| 338 | printk(BIOS_ERR, |
| 339 | "dp: Failed to read DPCD data. CMD 0x%x, Status 0x%x\n", |
| 340 | cmd, status); |
| 341 | |
| 342 | return ret; |
| 343 | } |
| 344 | |
| 345 | static int tegra_dc_dp_dpcd_write(struct tegra_dc_dp_data *dp, u32 cmd, |
| 346 | u8 data) |
| 347 | { |
| 348 | u32 size = 1; |
| 349 | u32 status = 0; |
| 350 | int ret; |
| 351 | |
| 352 | ret = tegra_dc_dpaux_write_chunk(dp, DPAUX_DP_AUXCTL_CMD_AUXWR, |
| 353 | cmd, &data, &size, &status); |
| 354 | if (ret) |
| 355 | printk(BIOS_ERR, |
| 356 | "dp: Failed to write DPCD data. CMD 0x%x, Status 0x%x\n", |
| 357 | cmd, status); |
| 358 | return ret; |
| 359 | } |
| 360 | |
| 361 | static int tegra_dc_i2c_aux_read(struct tegra_dc_dp_data *dp, u32 i2c_addr, |
| 362 | u8 addr, u8 *data, u32 *size, u32 *aux_stat) |
| 363 | { |
| 364 | u32 finished = 0; |
| 365 | int ret = 0; |
| 366 | |
| 367 | do { |
| 368 | u32 cur_size = MIN(DP_AUX_MAX_BYTES, *size - finished); |
| 369 | |
| 370 | u32 len = 1; |
| 371 | ret = tegra_dc_dpaux_write_chunk( |
| 372 | dp, DPAUX_DP_AUXCTL_CMD_MOTWR, i2c_addr, |
| 373 | &addr, &len, aux_stat); |
| 374 | if (ret) { |
| 375 | printk(BIOS_ERR, "%s: error sending address to read.\n", |
| 376 | __func__); |
| 377 | break; |
| 378 | } |
| 379 | |
| 380 | ret = tegra_dc_dpaux_read_chunk( |
| 381 | dp, DPAUX_DP_AUXCTL_CMD_I2CRD, i2c_addr, |
| 382 | data, &cur_size, aux_stat); |
| 383 | if (ret) { |
| 384 | printk(BIOS_ERR, "%s: error reading data.\n", __func__); |
| 385 | break; |
| 386 | } |
| 387 | |
| 388 | /* cur_size should be the real size returned */ |
| 389 | addr += cur_size; |
| 390 | data += cur_size; |
| 391 | finished += cur_size; |
| 392 | } while (*size > finished); |
| 393 | |
| 394 | *size = finished; |
| 395 | return ret; |
| 396 | } |
| 397 | |
| 398 | static void tegra_dc_dpaux_enable(struct tegra_dc_dp_data *dp) |
| 399 | { |
| 400 | /* clear interrupt */ |
| 401 | tegra_dpaux_writel(dp, DPAUX_INTR_AUX, 0xffffffff); |
| 402 | /* do not enable interrupt for now. Enable them when Isr in place */ |
| 403 | tegra_dpaux_writel(dp, DPAUX_INTR_EN_AUX, 0x0); |
| 404 | |
| 405 | tegra_dpaux_writel(dp, DPAUX_HYBRID_PADCTL, |
| 406 | DPAUX_HYBRID_PADCTL_AUX_DRVZ_OHM_50 | |
| 407 | DPAUX_HYBRID_PADCTL_AUX_CMH_V0_70 | |
| 408 | 0x18 << DPAUX_HYBRID_PADCTL_AUX_DRVI_SHIFT | |
| 409 | DPAUX_HYBRID_PADCTL_AUX_INPUT_RCV_ENABLE); |
| 410 | |
| 411 | tegra_dpaux_writel(dp, DPAUX_HYBRID_SPARE, |
| 412 | DPAUX_HYBRID_SPARE_PAD_PWR_POWERUP); |
| 413 | } |
| 414 | |
| 415 | static void tegra_dc_dp_dump_link_cfg(struct tegra_dc_dp_data *dp, |
| 416 | const struct tegra_dc_dp_link_config *link_cfg) |
| 417 | { |
| 418 | printk(BIOS_INFO, "DP config: cfg_name " |
| 419 | "cfg_value\n"); |
| 420 | printk(BIOS_INFO, " Lane Count %d\n", |
| 421 | link_cfg->max_lane_count); |
| 422 | printk(BIOS_INFO, " SupportEnhancedFraming %s\n", |
| 423 | link_cfg->support_enhanced_framing ? "Y" : "N"); |
| 424 | printk(BIOS_INFO, " Bandwidth %d\n", |
| 425 | link_cfg->max_link_bw); |
| 426 | printk(BIOS_INFO, " bpp %d\n", |
| 427 | link_cfg->bits_per_pixel); |
| 428 | printk(BIOS_INFO, " EnhancedFraming %s\n", |
| 429 | link_cfg->enhanced_framing ? "Y" : "N"); |
| 430 | printk(BIOS_INFO, " Scramble_enabled %s\n", |
| 431 | link_cfg->scramble_ena ? "Y" : "N"); |
| 432 | printk(BIOS_INFO, " LinkBW %d\n", |
| 433 | link_cfg->link_bw); |
| 434 | printk(BIOS_INFO, " lane_count %d\n", |
| 435 | link_cfg->lane_count); |
| 436 | printk(BIOS_INFO, " activespolarity %d\n", |
| 437 | link_cfg->activepolarity); |
| 438 | printk(BIOS_INFO, " active_count %d\n", |
| 439 | link_cfg->active_count); |
| 440 | printk(BIOS_INFO, " tu_size %d\n", |
| 441 | link_cfg->tu_size); |
| 442 | printk(BIOS_INFO, " active_frac %d\n", |
| 443 | link_cfg->active_frac); |
| 444 | printk(BIOS_INFO, " watermark %d\n", |
| 445 | link_cfg->watermark); |
| 446 | printk(BIOS_INFO, " hblank_sym %d\n", |
| 447 | link_cfg->hblank_sym); |
| 448 | printk(BIOS_INFO, " vblank_sym %d\n", |
| 449 | link_cfg->vblank_sym); |
| 450 | } |
| 451 | |
| 452 | static int _tegra_dp_lower_link_config(struct tegra_dc_dp_data *dp, |
| 453 | struct tegra_dc_dp_link_config *link_cfg) |
| 454 | { |
| 455 | |
| 456 | switch (link_cfg->link_bw) { |
| 457 | case SOR_LINK_SPEED_G1_62: |
| 458 | if (link_cfg->max_link_bw > SOR_LINK_SPEED_G1_62) |
| 459 | link_cfg->link_bw = SOR_LINK_SPEED_G2_7; |
| 460 | link_cfg->lane_count /= 2; |
| 461 | break; |
| 462 | case SOR_LINK_SPEED_G2_7: |
| 463 | link_cfg->link_bw = SOR_LINK_SPEED_G1_62; |
| 464 | break; |
| 465 | case SOR_LINK_SPEED_G5_4: |
| 466 | if (link_cfg->lane_count == 1) { |
| 467 | link_cfg->link_bw = SOR_LINK_SPEED_G2_7; |
| 468 | link_cfg->lane_count = link_cfg->max_lane_count; |
| 469 | } else |
| 470 | link_cfg->lane_count /= 2; |
| 471 | break; |
| 472 | default: |
| 473 | printk(BIOS_ERR, "dp: Error link rate %d\n", link_cfg->link_bw); |
| 474 | return DP_LT_FAILED; |
| 475 | } |
| 476 | |
| 477 | return (link_cfg->lane_count > 0) ? DP_LT_SUCCESS : DP_LT_FAILED; |
| 478 | } |
| 479 | |
| 480 | /* Calcuate if given cfg can meet the mode request. */ |
| 481 | /* Return true if mode is possible, false otherwise. */ |
| 482 | static int tegra_dc_dp_calc_config(struct tegra_dc_dp_data *dp, |
| 483 | const struct soc_nvidia_tegra210_config *config, |
| 484 | struct tegra_dc_dp_link_config *link_cfg) |
| 485 | { |
| 486 | const u32 link_rate = 27 * link_cfg->link_bw * 1000 * 1000; |
| 487 | const u64 f = 100000; /* precision factor */ |
| 488 | |
| 489 | u32 num_linkclk_line; /* Number of link clocks per line */ |
| 490 | u64 ratio_f; /* Ratio of incoming to outgoing data rate */ |
| 491 | |
| 492 | u64 frac_f; |
| 493 | u64 activesym_f; /* Activesym per TU */ |
| 494 | u64 activecount_f; |
| 495 | u32 activecount; |
| 496 | u32 activepolarity; |
| 497 | u64 approx_value_f; |
| 498 | u32 activefrac = 0; |
| 499 | u64 accumulated_error_f = 0; |
| 500 | u32 lowest_neg_activecount = 0; |
| 501 | u32 lowest_neg_activepolarity = 0; |
| 502 | u32 lowest_neg_tusize = 64; |
| 503 | u32 num_symbols_per_line; |
| 504 | u64 lowest_neg_activefrac = 0; |
| 505 | u64 lowest_neg_error_f = 64 * f; |
| 506 | u64 watermark_f; |
| 507 | |
| 508 | int i; |
| 509 | int neg; |
| 510 | |
| 511 | printk(BIOS_INFO, "dp: %s\n", __func__); |
| 512 | |
| 513 | if (!link_rate || !link_cfg->lane_count || !config->pixel_clock || |
| 514 | !link_cfg->bits_per_pixel) |
| 515 | return -1; |
| 516 | |
| 517 | if ((u64)config->pixel_clock * link_cfg->bits_per_pixel >= |
| 518 | (u64)link_rate * 8 * link_cfg->lane_count) |
| 519 | return -1; |
| 520 | |
| 521 | num_linkclk_line = (u32)((u64)link_rate * (u64)config->xres / |
| 522 | config->pixel_clock); |
| 523 | |
| 524 | ratio_f = (u64)config->pixel_clock * link_cfg->bits_per_pixel * f; |
| 525 | ratio_f /= 8; |
| 526 | ratio_f = (u64)(ratio_f / (link_rate * link_cfg->lane_count)); |
| 527 | |
| 528 | for (i = 64; i >= 32; --i) { |
| 529 | activesym_f = ratio_f * i; |
| 530 | activecount_f = (u64)(activesym_f / (u32)f) * f; |
| 531 | frac_f = activesym_f - activecount_f; |
| 532 | activecount = (u32)((u64)(activecount_f / (u32)f)); |
| 533 | |
| 534 | if (frac_f < (f / 2)) /* fraction < 0.5 */ |
| 535 | activepolarity = 0; |
| 536 | else { |
| 537 | activepolarity = 1; |
| 538 | frac_f = f - frac_f; |
| 539 | } |
| 540 | |
| 541 | if (frac_f != 0) { |
| 542 | frac_f = (u64)((f * f) / frac_f); /* 1/fraction */ |
| 543 | if (frac_f > (15 * f)) |
| 544 | activefrac = activepolarity ? 1 : 15; |
| 545 | else |
| 546 | activefrac = activepolarity ? |
| 547 | (u32)((u64)(frac_f / (u32)f)) + 1 : |
| 548 | (u32)((u64)(frac_f / (u32)f)); |
| 549 | } |
| 550 | |
| 551 | if (activefrac == 1) |
| 552 | activepolarity = 0; |
| 553 | |
| 554 | if (activepolarity == 1) |
| 555 | approx_value_f = activefrac ? (u64)( |
| 556 | (activecount_f + (activefrac * f - f) * f) / |
| 557 | (activefrac * f)) : |
| 558 | activecount_f + f; |
| 559 | else |
| 560 | approx_value_f = activefrac ? |
| 561 | activecount_f + (u64)(f / activefrac) : |
| 562 | activecount_f; |
| 563 | |
| 564 | if (activesym_f < approx_value_f) { |
| 565 | accumulated_error_f = num_linkclk_line * |
| 566 | (u64)((approx_value_f - activesym_f) / i); |
| 567 | neg = 1; |
| 568 | } else { |
| 569 | accumulated_error_f = num_linkclk_line * |
| 570 | (u64)((activesym_f - approx_value_f) / i); |
| 571 | neg = 0; |
| 572 | } |
| 573 | |
| 574 | if ((neg && (lowest_neg_error_f > accumulated_error_f)) || |
| 575 | (accumulated_error_f == 0)) { |
| 576 | lowest_neg_error_f = accumulated_error_f; |
| 577 | lowest_neg_tusize = i; |
| 578 | lowest_neg_activecount = activecount; |
| 579 | lowest_neg_activepolarity = activepolarity; |
| 580 | lowest_neg_activefrac = activefrac; |
| 581 | |
| 582 | if (accumulated_error_f == 0) |
| 583 | break; |
| 584 | } |
| 585 | } |
| 586 | |
| 587 | if (lowest_neg_activefrac == 0) { |
| 588 | link_cfg->activepolarity = 0; |
| 589 | link_cfg->active_count = lowest_neg_activepolarity ? |
| 590 | lowest_neg_activecount : lowest_neg_activecount - 1; |
| 591 | link_cfg->tu_size = lowest_neg_tusize; |
| 592 | link_cfg->active_frac = 1; |
| 593 | } else { |
| 594 | link_cfg->activepolarity = lowest_neg_activepolarity; |
| 595 | link_cfg->active_count = (u32)lowest_neg_activecount; |
| 596 | link_cfg->tu_size = lowest_neg_tusize; |
| 597 | link_cfg->active_frac = (u32)lowest_neg_activefrac; |
| 598 | } |
| 599 | |
| 600 | watermark_f = (u64)((ratio_f * link_cfg->tu_size * (f - ratio_f)) / f); |
| 601 | link_cfg->watermark = (u32)((u64)((watermark_f + lowest_neg_error_f) / |
| 602 | f)) + link_cfg->bits_per_pixel / 4 - 1; |
| 603 | num_symbols_per_line = (config->xres * link_cfg->bits_per_pixel) / |
| 604 | (8 * link_cfg->lane_count); |
| 605 | |
| 606 | if (link_cfg->watermark > 30) { |
| 607 | printk(BIOS_INFO, |
| 608 | "dp: sor setting: unable to get a good tusize, " |
| 609 | "force watermark to 30.\n"); |
| 610 | link_cfg->watermark = 30; |
| 611 | return -1; |
| 612 | } else if (link_cfg->watermark > num_symbols_per_line) { |
| 613 | printk(BIOS_INFO, |
| 614 | "dp: sor setting: force watermark to the number " |
| 615 | "of symbols in the line.\n"); |
| 616 | link_cfg->watermark = num_symbols_per_line; |
| 617 | return -1; |
| 618 | } |
| 619 | |
| 620 | /* Refer to dev_disp.ref for more information. */ |
| 621 | /* # symbols/hblank = ((SetRasterBlankEnd.X + SetRasterSize.Width - */ |
| 622 | /* SetRasterBlankStart.X - 7) * link_clk / pclk) */ |
| 623 | /* - 3 * enhanced_framing - Y */ |
| 624 | /* where Y = (# lanes == 4) 3 : (# lanes == 2) ? 6 : 12 */ |
| 625 | link_cfg->hblank_sym = (int)((u64)(((u64)(config->hback_porch + |
| 626 | config->hfront_porch + config->hsync_width - 7) * |
| 627 | link_rate) / config->pixel_clock)) - |
| 628 | 3 * link_cfg->enhanced_framing - |
| 629 | (12 / link_cfg->lane_count); |
| 630 | |
| 631 | if (link_cfg->hblank_sym < 0) |
| 632 | link_cfg->hblank_sym = 0; |
| 633 | |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 634 | /* Refer to dev_disp.ref for more information. */ |
| 635 | /* # symbols/vblank = ((SetRasterBlankStart.X - */ |
| 636 | /* SetRasterBlankEen.X - 25) * link_clk / pclk) */ |
| 637 | /* - Y - 1; */ |
| 638 | /* where Y = (# lanes == 4) 12 : (# lanes == 2) ? 21 : 39 */ |
| 639 | link_cfg->vblank_sym = (int)((u64)((u64)(config->xres - 25) |
| 640 | * link_rate / config->pixel_clock)) - (36 / |
| 641 | link_cfg->lane_count) - 4; |
| 642 | |
| 643 | if (link_cfg->vblank_sym < 0) |
| 644 | link_cfg->vblank_sym = 0; |
| 645 | |
| 646 | link_cfg->is_valid = 1; |
| 647 | tegra_dc_dp_dump_link_cfg(dp, link_cfg); |
| 648 | |
| 649 | return 0; |
| 650 | } |
| 651 | |
| 652 | static int tegra_dc_dp_init_max_link_cfg( |
| 653 | struct soc_nvidia_tegra210_config *config, |
| 654 | struct tegra_dc_dp_data *dp, |
| 655 | struct tegra_dc_dp_link_config *link_cfg) |
| 656 | { |
| 657 | u8 dpcd_data; |
| 658 | int ret; |
| 659 | |
| 660 | printk(BIOS_INFO, "dp: %s\n", __func__); |
| 661 | |
| 662 | CHECK_RET(tegra_dc_dp_dpcd_read(dp, NV_DPCD_MAX_LANE_COUNT, |
| 663 | &dpcd_data)); |
| 664 | link_cfg->max_lane_count = dpcd_data & NV_DPCD_MAX_LANE_COUNT_MASK; |
| 665 | link_cfg->tps3_supported = (dpcd_data & |
| 666 | NV_DPCD_MAX_LANE_COUNT_TPS3_SUPPORTED_YES) ? 1 : 0; |
| 667 | |
| 668 | link_cfg->support_enhanced_framing = |
| 669 | (dpcd_data & NV_DPCD_MAX_LANE_COUNT_ENHANCED_FRAMING_YES) ? |
| 670 | 1 : 0; |
| 671 | |
| 672 | CHECK_RET(tegra_dc_dp_dpcd_read(dp, NV_DPCD_MAX_DOWNSPREAD, |
| 673 | &dpcd_data)); |
| 674 | link_cfg->downspread = (dpcd_data & NV_DPCD_MAX_DOWNSPREAD_VAL_0_5_PCT) |
| 675 | ? 1 : 0; |
| 676 | |
| 677 | CHECK_RET(tegra_dc_dp_dpcd_read(dp, NV_DPCD_TRAINING_AUX_RD_INTERVAL, |
| 678 | &link_cfg->aux_rd_interval)); |
| 679 | |
| 680 | CHECK_RET(tegra_dc_dp_dpcd_read(dp, NV_DPCD_MAX_LINK_BANDWIDTH, |
| 681 | &link_cfg->max_link_bw)); |
| 682 | |
| 683 | link_cfg->bits_per_pixel = config->panel_bits_per_pixel; |
| 684 | |
| 685 | /* |
| 686 | * Set to a high value for link training and attach. |
| 687 | * Will be re-programmed when dp is enabled. |
| 688 | */ |
| 689 | link_cfg->drive_current = config->dp.drive_current; |
| 690 | link_cfg->preemphasis = config->dp.preemphasis; |
| 691 | link_cfg->postcursor = config->dp.postcursor; |
| 692 | |
| 693 | CHECK_RET(tegra_dc_dp_dpcd_read(dp, NV_DPCD_EDP_CONFIG_CAP, |
| 694 | &dpcd_data)); |
| 695 | link_cfg->alt_scramber_reset_cap = |
| 696 | (dpcd_data & NV_DPCD_EDP_CONFIG_CAP_ASC_RESET_YES) ? |
| 697 | 1 : 0; |
| 698 | link_cfg->only_enhanced_framing = |
| 699 | (dpcd_data & NV_DPCD_EDP_CONFIG_CAP_FRAMING_CHANGE_YES) ? |
| 700 | 1 : 0; |
| 701 | |
| 702 | link_cfg->lane_count = link_cfg->max_lane_count; |
| 703 | link_cfg->link_bw = link_cfg->max_link_bw; |
| 704 | link_cfg->enhanced_framing = link_cfg->support_enhanced_framing; |
| 705 | |
| 706 | tegra_dc_dp_calc_config(dp, config, link_cfg); |
| 707 | return 0; |
| 708 | } |
| 709 | |
| 710 | static int tegra_dc_dp_set_assr(struct tegra_dc_dp_data *dp, int ena) |
| 711 | { |
| 712 | int ret; |
| 713 | |
| 714 | u8 dpcd_data = ena ? |
| 715 | NV_DPCD_EDP_CONFIG_SET_ASC_RESET_ENABLE : |
| 716 | NV_DPCD_EDP_CONFIG_SET_ASC_RESET_DISABLE; |
| 717 | |
| 718 | CHECK_RET(tegra_dc_dp_dpcd_write(dp, NV_DPCD_EDP_CONFIG_SET, |
| 719 | dpcd_data)); |
| 720 | |
| 721 | /* Also reset the scrambler to 0xfffe */ |
| 722 | tegra_dc_sor_set_internal_panel(&dp->sor, ena); |
| 723 | return 0; |
| 724 | } |
| 725 | |
| 726 | static int tegra_dp_set_link_bandwidth(struct tegra_dc_dp_data *dp, u8 link_bw) |
| 727 | { |
| 728 | tegra_dc_sor_set_link_bandwidth(&dp->sor, link_bw); |
| 729 | |
| 730 | /* Sink side */ |
| 731 | return tegra_dc_dp_dpcd_write(dp, NV_DPCD_LINK_BANDWIDTH_SET, link_bw); |
| 732 | } |
| 733 | |
| 734 | static int tegra_dp_set_lane_count(struct tegra_dc_dp_data *dp, |
| 735 | const struct tegra_dc_dp_link_config *link_cfg) |
| 736 | { |
| 737 | u8 dpcd_data; |
| 738 | int ret; |
| 739 | |
| 740 | /* check if panel support enhanched_framing */ |
| 741 | dpcd_data = link_cfg->lane_count; |
| 742 | if (link_cfg->enhanced_framing) |
| 743 | dpcd_data |= NV_DPCD_LANE_COUNT_SET_ENHANCEDFRAMING_T; |
| 744 | CHECK_RET(tegra_dc_dp_dpcd_write(dp, NV_DPCD_LANE_COUNT_SET, |
| 745 | dpcd_data)); |
| 746 | |
| 747 | tegra_dc_sor_set_lane_count(&dp->sor, link_cfg->lane_count); |
| 748 | |
| 749 | /* Also power down lanes that will not be used */ |
| 750 | return 0; |
| 751 | } |
| 752 | |
| 753 | #if DO_FAST_LINK_TRAINING |
| 754 | static int tegra_dc_dp_link_trained(struct tegra_dc_dp_data *dp, |
| 755 | const struct tegra_dc_dp_link_config *link_cfg) |
| 756 | { |
| 757 | u32 lane; |
| 758 | u8 mask; |
| 759 | u8 data; |
| 760 | int ret; |
| 761 | |
| 762 | for (lane = 0; lane < link_cfg->lane_count; ++lane) { |
| 763 | CHECK_RET(tegra_dc_dp_dpcd_read(dp, (lane/2) ? |
| 764 | NV_DPCD_LANE2_3_STATUS : NV_DPCD_LANE0_1_STATUS, |
| 765 | &data)); |
| 766 | mask = (lane & 1) ? |
| 767 | NV_DPCD_STATUS_LANEXPLUS1_CR_DONE_YES | |
| 768 | NV_DPCD_STATUS_LANEXPLUS1_CHN_EQ_DONE_YES | |
| 769 | NV_DPCD_STATUS_LANEXPLUS1_SYMBOL_LOCKED_YES : |
| 770 | NV_DPCD_STATUS_LANEX_CR_DONE_YES | |
| 771 | NV_DPCD_STATUS_LANEX_CHN_EQ_DONE_YES | |
| 772 | NV_DPCD_STATUS_LANEX_SYMBOL_LOCKED_YES; |
| 773 | if ((data & mask) != mask) |
| 774 | return -1; |
| 775 | } |
| 776 | return 0; |
| 777 | } |
| 778 | #endif /* DO_FAST_LINK_TRAINING */ |
| 779 | |
| 780 | static int tegra_dp_channel_eq_status(struct tegra_dc_dp_data *dp) |
| 781 | { |
| 782 | u32 cnt; |
| 783 | u32 n_lanes = dp->link_cfg.lane_count; |
| 784 | u8 data; |
| 785 | u8 ce_done = 1; |
| 786 | |
| 787 | for (cnt = 0; cnt < n_lanes / 2; cnt++) { |
| 788 | tegra_dc_dp_dpcd_read(dp, (NV_DPCD_LANE0_1_STATUS + cnt), |
| 789 | &data); |
| 790 | |
| 791 | if (n_lanes == 1) { |
| 792 | ce_done = |
| 793 | (data & (0x1 << NV_DPCD_STATUS_LANEX_CHN_EQ_DONE_SHIFT)) && |
| 794 | (data & (0x1 << NV_DPCD_STATUS_LANEX_SYMBOL_LOCKED_SHFIT)); |
| 795 | break; |
| 796 | } else |
| 797 | if (!(data & (0x1 << NV_DPCD_STATUS_LANEX_CHN_EQ_DONE_SHIFT)) || |
| 798 | !(data & (0x1 << NV_DPCD_STATUS_LANEX_SYMBOL_LOCKED_SHFIT)) || |
| 799 | !(data & (0x1 << NV_DPCD_STATUS_LANEXPLUS1_CHN_EQ_DONE_SHIFT)) || |
| 800 | !(data & (0x1 << NV_DPCD_STATUS_LANEXPLUS1_SYMBOL_LOCKED_SHIFT))) |
| 801 | return 0; |
| 802 | } |
| 803 | |
| 804 | if (ce_done) { |
| 805 | tegra_dc_dp_dpcd_read(dp, NV_DPCD_LANE_ALIGN_STATUS_UPDATED, |
| 806 | &data); |
| 807 | if (!(data & NV_DPCD_LANE_ALIGN_STATUS_UPDATED_DONE_YES)) |
| 808 | ce_done = 0; |
| 809 | } |
| 810 | |
| 811 | return ce_done; |
| 812 | } |
| 813 | |
| 814 | static u8 tegra_dp_clock_recovery_status(struct tegra_dc_dp_data *dp) |
| 815 | { |
| 816 | u32 cnt; |
| 817 | u32 n_lanes = dp->link_cfg.lane_count; |
| 818 | u8 data_ptr; |
| 819 | |
| 820 | for (cnt = 0; cnt < n_lanes / 2; cnt++) { |
| 821 | tegra_dc_dp_dpcd_read(dp, |
| 822 | (NV_DPCD_LANE0_1_STATUS + cnt), &data_ptr); |
| 823 | |
| 824 | if (n_lanes == 1) |
| 825 | return (data_ptr & NV_DPCD_STATUS_LANEX_CR_DONE_YES) ? 1 : 0; |
| 826 | else if (!(data_ptr & NV_DPCD_STATUS_LANEX_CR_DONE_YES) || |
| 827 | !(data_ptr & (NV_DPCD_STATUS_LANEXPLUS1_CR_DONE_YES))) |
| 828 | return 0; |
| 829 | } |
| 830 | |
| 831 | return 1; |
| 832 | } |
| 833 | |
| 834 | static void tegra_dp_lt_adjust(struct tegra_dc_dp_data *dp, |
| 835 | u32 pe[4], u32 vs[4], u32 pc[4], |
| 836 | u8 pc_supported) |
| 837 | { |
| 838 | size_t cnt; |
| 839 | u8 data_ptr; |
| 840 | u32 n_lanes = dp->link_cfg.lane_count; |
| 841 | |
| 842 | for (cnt = 0; cnt < n_lanes / 2; cnt++) { |
| 843 | tegra_dc_dp_dpcd_read(dp, |
| 844 | (NV_DPCD_LANE0_1_ADJUST_REQ + cnt), &data_ptr); |
| 845 | pe[2 * cnt] = (data_ptr & NV_DPCD_ADJUST_REQ_LANEX_PE_MASK) >> |
| 846 | NV_DPCD_ADJUST_REQ_LANEX_PE_SHIFT; |
| 847 | vs[2 * cnt] = (data_ptr & NV_DPCD_ADJUST_REQ_LANEX_DC_MASK) >> |
| 848 | NV_DPCD_ADJUST_REQ_LANEX_DC_SHIFT; |
| 849 | pe[1 + 2 * cnt] = |
| 850 | (data_ptr & NV_DPCD_ADJUST_REQ_LANEXPLUS1_PE_MASK) >> |
| 851 | NV_DPCD_ADJUST_REQ_LANEXPLUS1_PE_SHIFT; |
| 852 | vs[1 + 2 * cnt] = |
| 853 | (data_ptr & NV_DPCD_ADJUST_REQ_LANEXPLUS1_DC_MASK) >> |
| 854 | NV_DPCD_ADJUST_REQ_LANEXPLUS1_DC_SHIFT; |
| 855 | } |
| 856 | if (pc_supported) { |
| 857 | tegra_dc_dp_dpcd_read(dp, |
| 858 | NV_DPCD_ADJUST_REQ_POST_CURSOR2, &data_ptr); |
| 859 | for (cnt = 0; cnt < n_lanes; cnt++) { |
| 860 | pc[cnt] = (data_ptr >> |
| 861 | NV_DPCD_ADJUST_REQ_POST_CURSOR2_LANE_SHIFT(cnt)) & |
| 862 | NV_DPCD_ADJUST_REQ_POST_CURSOR2_LANE_MASK; |
| 863 | } |
| 864 | } |
| 865 | } |
| 866 | |
| 867 | static inline u32 tegra_dp_wait_aux_training(struct tegra_dc_dp_data *dp, |
| 868 | u8 is_clk_recovery) |
| 869 | { |
| 870 | if (!dp->link_cfg.aux_rd_interval) |
| 871 | is_clk_recovery ? udelay(200) : |
| 872 | udelay(500); |
| 873 | else |
| 874 | mdelay(dp->link_cfg.aux_rd_interval * 4); |
| 875 | |
| 876 | return dp->link_cfg.aux_rd_interval; |
| 877 | } |
| 878 | |
| 879 | static void tegra_dp_tpg(struct tegra_dc_dp_data *dp, u32 tp, u32 n_lanes) |
| 880 | { |
| 881 | u8 data = (tp == training_pattern_disabled) |
| 882 | ? (tp | NV_DPCD_TRAINING_PATTERN_SET_SC_DISABLED_F) |
| 883 | : (tp | NV_DPCD_TRAINING_PATTERN_SET_SC_DISABLED_T); |
| 884 | |
| 885 | tegra_dc_sor_set_dp_linkctl(&dp->sor, 1, tp, &dp->link_cfg); |
| 886 | tegra_dc_dp_dpcd_write(dp, NV_DPCD_TRAINING_PATTERN_SET, data); |
| 887 | } |
| 888 | |
| 889 | static int tegra_dp_link_config(struct tegra_dc_dp_data *dp, |
| 890 | const struct tegra_dc_dp_link_config *link_cfg) |
| 891 | { |
| 892 | u8 dpcd_data; |
| 893 | u32 retry; |
| 894 | |
| 895 | if (link_cfg->lane_count == 0) { |
| 896 | printk(BIOS_ERR, "dp: error: lane count is 0. " |
| 897 | "Can not set link config.\n"); |
| 898 | return DP_LT_FAILED; |
| 899 | } |
| 900 | |
| 901 | /* Set power state if it is not in normal level */ |
| 902 | if (tegra_dc_dp_dpcd_read(dp, NV_DPCD_SET_POWER, &dpcd_data)) |
| 903 | return DP_LT_FAILED; |
| 904 | |
| 905 | if (dpcd_data == NV_DPCD_SET_POWER_VAL_D3_PWRDWN) { |
| 906 | dpcd_data = NV_DPCD_SET_POWER_VAL_D0_NORMAL; |
| 907 | |
| 908 | /* DP spec requires 3 retries */ |
| 909 | for (retry = 3; retry > 0; --retry) { |
| 910 | if (tegra_dc_dp_dpcd_write(dp, NV_DPCD_SET_POWER, |
| 911 | dpcd_data)) |
| 912 | break; |
| 913 | if (retry == 1) { |
| 914 | printk(BIOS_ERR, "dp: Failed to set DP panel" |
| 915 | " power\n"); |
| 916 | return DP_LT_FAILED; |
| 917 | } |
| 918 | } |
| 919 | } |
| 920 | |
| 921 | /* Enable ASSR if possible */ |
| 922 | if (link_cfg->alt_scramber_reset_cap) |
| 923 | if (tegra_dc_dp_set_assr(dp, 1)) |
| 924 | return DP_LT_FAILED; |
| 925 | |
| 926 | if (tegra_dp_set_link_bandwidth(dp, link_cfg->link_bw)) { |
| 927 | printk(BIOS_ERR, "dp: Failed to set link bandwidth\n"); |
| 928 | return DP_LT_FAILED; |
| 929 | } |
| 930 | if (tegra_dp_set_lane_count(dp, link_cfg)) { |
| 931 | printk(BIOS_ERR, "dp: Failed to set lane count\n"); |
| 932 | return DP_LT_FAILED; |
| 933 | } |
| 934 | tegra_dc_sor_set_dp_linkctl(&dp->sor, 1, training_pattern_none, |
| 935 | link_cfg); |
| 936 | return DP_LT_SUCCESS; |
| 937 | } |
| 938 | |
| 939 | static int tegra_dp_lower_link_config(struct tegra_dc_dp_data *dp, |
| 940 | struct tegra_dc_dp_link_config *cfg) |
| 941 | { |
| 942 | struct tegra_dc_dp_link_config tmp_cfg; |
| 943 | |
| 944 | tmp_cfg = dp->link_cfg; |
| 945 | cfg->is_valid = 0; |
| 946 | |
| 947 | if (_tegra_dp_lower_link_config(dp, cfg)) |
| 948 | goto fail; |
| 949 | |
| 950 | if (tegra_dc_dp_calc_config(dp, dp->dc->config, cfg)) |
| 951 | goto fail; |
| 952 | tegra_dp_link_config(dp, cfg); |
| 953 | |
| 954 | return DP_LT_SUCCESS; |
| 955 | fail: |
| 956 | dp->link_cfg = tmp_cfg; |
| 957 | tegra_dp_link_config(dp, &tmp_cfg); |
| 958 | return DP_LT_FAILED; |
| 959 | } |
| 960 | |
| 961 | static void tegra_dp_lt_config(struct tegra_dc_dp_data *dp, |
| 962 | u32 pe[4], u32 vs[4], u32 pc[4]) |
| 963 | { |
| 964 | struct tegra_dc_sor_data *sor = &dp->sor; |
| 965 | u32 n_lanes = dp->link_cfg.lane_count; |
| 966 | u8 pc_supported = dp->link_cfg.tps3_supported; |
| 967 | u32 cnt; |
| 968 | u32 val; |
| 969 | |
| 970 | for (cnt = 0; cnt < n_lanes; cnt++) { |
| 971 | u32 mask = 0; |
| 972 | u32 pe_reg, vs_reg, pc_reg; |
| 973 | u32 shift = 0; |
| 974 | |
| 975 | switch (cnt) { |
| 976 | case 0: |
| 977 | mask = NV_SOR_PR_LANE2_DP_LANE0_MASK; |
| 978 | shift = NV_SOR_PR_LANE2_DP_LANE0_SHIFT; |
| 979 | break; |
| 980 | case 1: |
| 981 | mask = NV_SOR_PR_LANE1_DP_LANE1_MASK; |
| 982 | shift = NV_SOR_PR_LANE1_DP_LANE1_SHIFT; |
| 983 | break; |
| 984 | case 2: |
| 985 | mask = NV_SOR_PR_LANE0_DP_LANE2_MASK; |
| 986 | shift = NV_SOR_PR_LANE0_DP_LANE2_SHIFT; |
| 987 | break; |
| 988 | case 3: |
| 989 | mask = NV_SOR_PR_LANE3_DP_LANE3_MASK; |
| 990 | shift = NV_SOR_PR_LANE3_DP_LANE3_SHIFT; |
| 991 | break; |
| 992 | default: |
| 993 | printk(BIOS_ERR, |
| 994 | "dp: incorrect lane cnt\n"); |
| 995 | } |
| 996 | |
| 997 | pe_reg = tegra_dp_pe_regs[pc[cnt]][vs[cnt]][pe[cnt]]; |
| 998 | vs_reg = tegra_dp_vs_regs[pc[cnt]][vs[cnt]][pe[cnt]]; |
| 999 | pc_reg = tegra_dp_pc_regs[pc[cnt]][vs[cnt]][pe[cnt]]; |
| 1000 | |
| 1001 | tegra_dp_set_pe_vs_pc(sor, mask, pe_reg << shift, |
| 1002 | vs_reg << shift, pc_reg << shift, pc_supported); |
| 1003 | } |
| 1004 | |
| 1005 | tegra_dp_disable_tx_pu(&dp->sor); |
| 1006 | udelay(20); |
| 1007 | |
| 1008 | for (cnt = 0; cnt < n_lanes; cnt++) { |
| 1009 | u32 max_vs_flag = tegra_dp_is_max_vs(pe[cnt], vs[cnt]); |
| 1010 | u32 max_pe_flag = tegra_dp_is_max_pe(pe[cnt], vs[cnt]); |
| 1011 | |
| 1012 | val = (vs[cnt] << NV_DPCD_TRAINING_LANEX_SET_DC_SHIFT) | |
| 1013 | (max_vs_flag ? |
| 1014 | NV_DPCD_TRAINING_LANEX_SET_DC_MAX_REACHED_T : |
| 1015 | NV_DPCD_TRAINING_LANEX_SET_DC_MAX_REACHED_F) | |
| 1016 | (pe[cnt] << NV_DPCD_TRAINING_LANEX_SET_PE_SHIFT) | |
| 1017 | (max_pe_flag ? |
| 1018 | NV_DPCD_TRAINING_LANEX_SET_PE_MAX_REACHED_T : |
| 1019 | NV_DPCD_TRAINING_LANEX_SET_PE_MAX_REACHED_F); |
| 1020 | tegra_dc_dp_dpcd_write(dp, |
| 1021 | (NV_DPCD_TRAINING_LANE0_SET + cnt), val); |
| 1022 | } |
| 1023 | |
| 1024 | if (pc_supported) { |
| 1025 | for (cnt = 0; cnt < n_lanes / 2; cnt++) { |
| 1026 | u32 max_pc_flag0 = tegra_dp_is_max_pc(pc[cnt]); |
| 1027 | u32 max_pc_flag1 = tegra_dp_is_max_pc(pc[cnt + 1]); |
| 1028 | val = (pc[cnt] << NV_DPCD_LANEX_SET2_PC2_SHIFT) | |
| 1029 | (max_pc_flag0 ? |
| 1030 | NV_DPCD_LANEX_SET2_PC2_MAX_REACHED_T : |
| 1031 | NV_DPCD_LANEX_SET2_PC2_MAX_REACHED_F) | |
| 1032 | (pc[cnt + 1] << |
| 1033 | NV_DPCD_LANEXPLUS1_SET2_PC2_SHIFT) | |
| 1034 | (max_pc_flag1 ? |
| 1035 | NV_DPCD_LANEXPLUS1_SET2_PC2_MAX_REACHED_T : |
| 1036 | NV_DPCD_LANEXPLUS1_SET2_PC2_MAX_REACHED_F); |
| 1037 | tegra_dc_dp_dpcd_write(dp, |
| 1038 | (NV_DPCD_TRAINING_LANE0_1_SET2 + cnt), val); |
| 1039 | } |
| 1040 | } |
| 1041 | } |
| 1042 | |
| 1043 | static int _tegra_dp_channel_eq(struct tegra_dc_dp_data *dp, u32 pe[4], |
| 1044 | u32 vs[4], u32 pc[4], u8 pc_supported, |
| 1045 | u32 n_lanes) |
| 1046 | { |
| 1047 | u32 retry_cnt; |
| 1048 | |
| 1049 | for (retry_cnt = 0; retry_cnt < 4; retry_cnt++) { |
| 1050 | if (retry_cnt) { |
| 1051 | tegra_dp_lt_adjust(dp, pe, vs, pc, pc_supported); |
| 1052 | tegra_dp_lt_config(dp, pe, vs, pc); |
| 1053 | } |
| 1054 | |
| 1055 | tegra_dp_wait_aux_training(dp, 0); |
| 1056 | |
| 1057 | if (!tegra_dp_clock_recovery_status(dp)) { |
| 1058 | printk(BIOS_ERR, "dp: CR failed in channel EQ" |
| 1059 | " sequence!\n"); |
| 1060 | break; |
| 1061 | } |
| 1062 | |
| 1063 | if (tegra_dp_channel_eq_status(dp)) |
| 1064 | return DP_LT_SUCCESS; |
| 1065 | } |
| 1066 | |
| 1067 | return DP_LT_FAILED; |
| 1068 | } |
| 1069 | |
| 1070 | static int tegra_dp_channel_eq(struct tegra_dc_dp_data *dp, |
| 1071 | u32 pe[4], u32 vs[4], u32 pc[4]) |
| 1072 | { |
| 1073 | u32 n_lanes = dp->link_cfg.lane_count; |
| 1074 | u8 pc_supported = dp->link_cfg.tps3_supported; |
| 1075 | int err; |
| 1076 | u32 tp_src = training_pattern_2; |
| 1077 | |
| 1078 | if (pc_supported) |
| 1079 | tp_src = training_pattern_3; |
| 1080 | |
| 1081 | tegra_dp_tpg(dp, tp_src, n_lanes); |
| 1082 | |
| 1083 | err = _tegra_dp_channel_eq(dp, pe, vs, pc, pc_supported, n_lanes); |
| 1084 | |
| 1085 | tegra_dp_tpg(dp, training_pattern_disabled, n_lanes); |
| 1086 | |
| 1087 | return err; |
| 1088 | } |
| 1089 | |
| 1090 | static int _tegra_dp_clk_recovery(struct tegra_dc_dp_data *dp, u32 pe[4], |
| 1091 | u32 vs[4], u32 pc[4], u8 pc_supported, |
| 1092 | u32 n_lanes) |
| 1093 | { |
| 1094 | u32 vs_temp[4]; |
| 1095 | u32 retry_cnt = 0; |
| 1096 | |
| 1097 | do { |
| 1098 | tegra_dp_lt_config(dp, pe, vs, pc); |
| 1099 | tegra_dp_wait_aux_training(dp, 1); |
| 1100 | |
| 1101 | if (tegra_dp_clock_recovery_status(dp)) |
| 1102 | return DP_LT_SUCCESS; |
| 1103 | |
| 1104 | memcpy(vs_temp, vs, sizeof(vs_temp)); |
| 1105 | tegra_dp_lt_adjust(dp, pe, vs, pc, pc_supported); |
| 1106 | |
| 1107 | if (memcmp(vs_temp, vs, sizeof(vs_temp))) |
| 1108 | retry_cnt = 0; |
| 1109 | else |
| 1110 | ++retry_cnt; |
| 1111 | } while (retry_cnt < 5); |
| 1112 | |
| 1113 | return DP_LT_FAILED; |
| 1114 | } |
| 1115 | |
| 1116 | static int tegra_dp_clk_recovery(struct tegra_dc_dp_data *dp, |
| 1117 | u32 pe[4], u32 vs[4], u32 pc[4]) |
| 1118 | { |
| 1119 | u32 n_lanes = dp->link_cfg.lane_count; |
| 1120 | u8 pc_supported = dp->link_cfg.tps3_supported; |
| 1121 | int err; |
| 1122 | |
| 1123 | tegra_dp_tpg(dp, training_pattern_1, n_lanes); |
| 1124 | |
| 1125 | err = _tegra_dp_clk_recovery(dp, pe, vs, pc, pc_supported, n_lanes); |
| 1126 | if (err < 0) |
| 1127 | tegra_dp_tpg(dp, training_pattern_disabled, n_lanes); |
| 1128 | |
| 1129 | return err; |
| 1130 | } |
| 1131 | |
| 1132 | static int tegra_dc_dp_full_link_training(struct tegra_dc_dp_data *dp) |
| 1133 | { |
| 1134 | struct tegra_dc_sor_data *sor = &dp->sor; |
| 1135 | int err; |
| 1136 | u32 pe[4], vs[4], pc[4]; |
| 1137 | |
| 1138 | printk(BIOS_INFO, "dp: %s\n", __func__); |
| 1139 | tegra_sor_precharge_lanes(sor); |
| 1140 | |
| 1141 | retry_cr: |
| 1142 | memset(pe, preEmphasis_Disabled, sizeof(pe)); |
| 1143 | memset(vs, driveCurrent_Level0, sizeof(vs)); |
| 1144 | memset(pc, postCursor2_Level0, sizeof(pc)); |
| 1145 | |
| 1146 | err = tegra_dp_clk_recovery(dp, pe, vs, pc); |
| 1147 | if (err != DP_LT_SUCCESS) { |
| 1148 | if (!tegra_dp_lower_link_config(dp, &dp->link_cfg)) |
| 1149 | goto retry_cr; |
| 1150 | |
| 1151 | printk(BIOS_ERR, "dp: clk recovery failed\n"); |
| 1152 | goto fail; |
| 1153 | } |
| 1154 | |
| 1155 | err = tegra_dp_channel_eq(dp, pe, vs, pc); |
| 1156 | if (err != DP_LT_SUCCESS) { |
| 1157 | if (!tegra_dp_lower_link_config(dp, &dp->link_cfg)) |
| 1158 | goto retry_cr; |
| 1159 | |
| 1160 | printk(BIOS_ERR, |
| 1161 | "dp: channel equalization failed\n"); |
| 1162 | goto fail; |
| 1163 | } |
| 1164 | |
| 1165 | tegra_dc_dp_dump_link_cfg(dp, &dp->link_cfg); |
| 1166 | |
| 1167 | return 0; |
| 1168 | |
| 1169 | fail: |
| 1170 | return err; |
| 1171 | } |
| 1172 | |
| 1173 | /* |
| 1174 | * All link training functions are ported from kernel dc driver. |
| 1175 | * See more details at drivers/video/tegra/dc/dp.c |
| 1176 | */ |
| 1177 | #if DO_FAST_LINK_TRAINING |
| 1178 | static int tegra_dc_dp_fast_link_training(struct tegra_dc_dp_data *dp, |
| 1179 | const struct tegra_dc_dp_link_config *link_cfg) |
| 1180 | { |
| 1181 | struct tegra_dc_sor_data *sor = &dp->sor; |
| 1182 | u8 link_bw; |
| 1183 | u8 lane_count; |
| 1184 | u16 data16; |
| 1185 | u32 data32; |
| 1186 | u32 size; |
| 1187 | u32 status; |
| 1188 | int j; |
| 1189 | u32 mask = 0xffff >> ((4 - link_cfg->lane_count) * 4); |
| 1190 | |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 1191 | printk(BIOS_INFO, "dp: %s\n", __func__); |
| 1192 | |
| 1193 | tegra_dc_sor_set_lane_parm(sor, link_cfg); |
| 1194 | tegra_dc_dp_dpcd_write(dp, NV_DPCD_MAIN_LINK_CHANNEL_CODING_SET, |
| 1195 | NV_DPCD_MAIN_LINK_CHANNEL_CODING_SET_ANSI_8B10B); |
| 1196 | |
| 1197 | /* Send TP1 */ |
| 1198 | tegra_dc_sor_set_dp_linkctl(sor, 1, training_pattern_1, link_cfg); |
| 1199 | tegra_dc_dp_dpcd_write(dp, NV_DPCD_TRAINING_PATTERN_SET, |
| 1200 | NV_DPCD_TRAINING_PATTERN_SET_TPS_TP1); |
| 1201 | |
| 1202 | for (j = 0; j < link_cfg->lane_count; ++j) |
| 1203 | tegra_dc_dp_dpcd_write(dp, NV_DPCD_TRAINING_LANE0_SET + j, |
| 1204 | 0x24); |
| 1205 | udelay(520); |
| 1206 | |
| 1207 | size = sizeof(data16); |
| 1208 | tegra_dc_dpaux_read(dp, DPAUX_DP_AUXCTL_CMD_AUXRD, |
| 1209 | NV_DPCD_LANE0_1_STATUS, (u8 *)&data16, &size, &status); |
| 1210 | status = mask & 0x1111; |
| 1211 | if ((data16 & status) != status) { |
| 1212 | printk(BIOS_ERR, |
| 1213 | "dp: Link training error for TP1 (%#x)\n", data16); |
| 1214 | return -EFAULT; |
| 1215 | } |
| 1216 | |
| 1217 | /* enable ASSR */ |
| 1218 | tegra_dc_dp_set_assr(dp, link_cfg->scramble_ena); |
| 1219 | tegra_dc_sor_set_dp_linkctl(sor, 1, training_pattern_3, link_cfg); |
| 1220 | |
| 1221 | tegra_dc_dp_dpcd_write(dp, NV_DPCD_TRAINING_PATTERN_SET, |
| 1222 | link_cfg->link_bw == 20 ? 0x23 : 0x22); |
| 1223 | for (j = 0; j < link_cfg->lane_count; ++j) |
| 1224 | tegra_dc_dp_dpcd_write(dp, NV_DPCD_TRAINING_LANE0_SET + j, |
| 1225 | 0x24); |
| 1226 | udelay(520); |
| 1227 | |
| 1228 | size = sizeof(data32); |
| 1229 | tegra_dc_dpaux_read(dp, DPAUX_DP_AUXCTL_CMD_AUXRD, |
| 1230 | NV_DPCD_LANE0_1_STATUS, (u8 *)&data32, &size, &status); |
| 1231 | if ((data32 & mask) != (0x7777 & mask)) { |
| 1232 | printk(BIOS_ERR, |
| 1233 | "dp: Link training error for TP2/3 (0x%x)\n", data32); |
| 1234 | return -EFAULT; |
| 1235 | } |
| 1236 | |
| 1237 | tegra_dc_sor_set_dp_linkctl(sor, 1, training_pattern_disabled, |
| 1238 | link_cfg); |
| 1239 | tegra_dc_dp_dpcd_write(dp, NV_DPCD_TRAINING_PATTERN_SET, 0); |
| 1240 | |
| 1241 | if (tegra_dc_dp_link_trained(dp, link_cfg)) { |
| 1242 | tegra_dc_sor_read_link_config(&dp->sor, &link_bw, |
| 1243 | &lane_count); |
| 1244 | printk(BIOS_ERR, |
| 1245 | "Fast link trainging failed, link bw %d, lane # %d\n", |
| 1246 | link_bw, lane_count); |
| 1247 | return -EFAULT; |
| 1248 | } |
| 1249 | |
| 1250 | printk(BIOS_INFO, |
| 1251 | "Fast link trainging succeeded, link bw %d, lane %d\n", |
| 1252 | link_cfg->link_bw, link_cfg->lane_count); |
| 1253 | |
| 1254 | return 0; |
| 1255 | } |
| 1256 | #endif /* DO_FAST_LINK_TRAINING */ |
| 1257 | |
| 1258 | static int tegra_dp_do_link_training(struct tegra_dc_dp_data *dp, |
| 1259 | const struct tegra_dc_dp_link_config *link_cfg) |
| 1260 | { |
| 1261 | u8 link_bw; |
| 1262 | u8 lane_count; |
| 1263 | #if DO_FAST_LINK_TRAINING |
| 1264 | int ret; |
| 1265 | |
| 1266 | /* Now do the fast link training for eDP */ |
| 1267 | ret = tegra_dc_dp_fast_link_training(dp, link_cfg); |
| 1268 | if (ret) { |
| 1269 | printk(BIOS_ERR, "dp: fast link training failed\n"); |
| 1270 | |
| 1271 | /* Try full link training then */ |
| 1272 | if (tegra_dc_dp_full_link_training(dp)) { |
| 1273 | printk(BIOS_ERR, "dp: full link training failed\n"); |
| 1274 | return ret; |
| 1275 | } |
| 1276 | } else { |
| 1277 | /* set to a known-good drive setting if fast link succeeded */ |
| 1278 | tegra_dc_sor_set_voltage_swing(&dp->sor); |
| 1279 | } |
| 1280 | #else |
| 1281 | if (tegra_dc_dp_full_link_training(dp)) { |
| 1282 | printk(BIOS_ERR, "dp: full link training failed\n"); |
| 1283 | return -EFAULT; |
| 1284 | } |
| 1285 | #endif |
| 1286 | |
| 1287 | /* Everything goes well, double check the link config */ |
| 1288 | /* TODO: record edc/c2 data for debugging */ |
| 1289 | tegra_dc_sor_read_link_config(&dp->sor, &link_bw, &lane_count); |
| 1290 | |
| 1291 | if ((link_cfg->link_bw == link_bw) && |
| 1292 | (link_cfg->lane_count == lane_count)) |
| 1293 | return 0; |
| 1294 | else |
| 1295 | return -EFAULT; |
| 1296 | } |
| 1297 | |
| 1298 | static int tegra_dc_dp_explore_link_cfg(struct tegra_dc_dp_data *dp, |
| 1299 | struct tegra_dc_dp_link_config *link_cfg, |
| 1300 | const struct soc_nvidia_tegra210_config *config) |
| 1301 | { |
| 1302 | struct tegra_dc_dp_link_config temp_cfg; |
| 1303 | |
| 1304 | if (!config->pixel_clock || !config->xres || !config->yres) { |
| 1305 | printk(BIOS_ERR, |
| 1306 | "dp: error mode configuration"); |
| 1307 | return -EINVAL; |
| 1308 | } |
| 1309 | if (!link_cfg->max_link_bw || !link_cfg->max_lane_count) { |
| 1310 | printk(BIOS_ERR, |
| 1311 | "dp: error link configuration"); |
| 1312 | return -EINVAL; |
| 1313 | } |
| 1314 | |
| 1315 | link_cfg->is_valid = 0; |
| 1316 | |
| 1317 | memcpy(&temp_cfg, link_cfg, sizeof(temp_cfg)); |
| 1318 | |
| 1319 | temp_cfg.link_bw = temp_cfg.max_link_bw; |
| 1320 | temp_cfg.lane_count = temp_cfg.max_lane_count; |
| 1321 | |
| 1322 | /* |
| 1323 | * set to max link config |
| 1324 | */ |
| 1325 | if ((!tegra_dc_dp_calc_config(dp, config, &temp_cfg)) && |
| 1326 | (!tegra_dp_link_config(dp, &temp_cfg)) && |
| 1327 | (!tegra_dp_do_link_training(dp, &temp_cfg))) |
| 1328 | /* the max link cfg is doable */ |
| 1329 | memcpy(link_cfg, &temp_cfg, sizeof(temp_cfg)); |
| 1330 | |
| 1331 | return link_cfg->is_valid ? 0 : -EFAULT; |
| 1332 | } |
| 1333 | |
| 1334 | static void tegra_dp_update_config(struct tegra_dc_dp_data *dp, |
| 1335 | struct soc_nvidia_tegra210_config *config) |
| 1336 | { |
| 1337 | struct edid edid; |
| 1338 | u8 buf[128] = {0}; |
| 1339 | u32 size = sizeof(buf), aux_stat = 0; |
| 1340 | |
| 1341 | printk(BIOS_ERR, "%s: enable r/w dump.\n", |
| 1342 | __func__); |
| 1343 | |
| 1344 | tegra_dc_dpaux_enable(dp); |
| 1345 | if (tegra_dc_i2c_aux_read(dp, TEGRA_EDID_I2C_ADDRESS, 0, buf, &size, |
| 1346 | &aux_stat)) { |
| 1347 | printk(BIOS_ERR, "%s: Failed to read EDID. Use defaults.\n", |
| 1348 | __func__); |
| 1349 | return; |
| 1350 | } |
| 1351 | |
Arthur Heymans | 8c5884e | 2017-04-30 08:28:05 +0200 | [diff] [blame] | 1352 | if (decode_edid(buf, sizeof(buf), &edid) != EDID_CONFORMANT) { |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 1353 | printk(BIOS_ERR, "%s: Failed to decode EDID. Use defaults.\n", |
| 1354 | __func__); |
| 1355 | return; |
| 1356 | } |
| 1357 | |
David Hendricks | 7dbf9c6 | 2015-07-30 18:49:48 -0700 | [diff] [blame] | 1358 | config->xres = config->display_xres = edid.mode.ha; |
| 1359 | config->yres = config->display_yres = edid.mode.va; |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 1360 | |
David Hendricks | 7dbf9c6 | 2015-07-30 18:49:48 -0700 | [diff] [blame] | 1361 | config->pixel_clock = edid.mode.pixel_clock * 1000; |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 1362 | |
David Hendricks | 7dbf9c6 | 2015-07-30 18:49:48 -0700 | [diff] [blame] | 1363 | config->hfront_porch = edid.mode.hso; |
| 1364 | config->hsync_width = edid.mode.hspw; |
| 1365 | config->hback_porch = edid.mode.hbl - edid.mode.hso - edid.mode.hspw; |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 1366 | |
David Hendricks | 7dbf9c6 | 2015-07-30 18:49:48 -0700 | [diff] [blame] | 1367 | config->vfront_porch = edid.mode.vso; |
| 1368 | config->vsync_width = edid.mode.vspw; |
| 1369 | config->vback_porch = edid.mode.vbl - edid.mode.vso - edid.mode.vspw; |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 1370 | |
| 1371 | /** |
| 1372 | * Note edid->framebuffer_bits_per_pixel is currently hard-coded as 32, |
| 1373 | * so we should keep the default value in device config. |
| 1374 | * |
| 1375 | * EDID v1.3 panels may not have color depth info, so we need to check |
| 1376 | * if these values are zero before updating config. |
| 1377 | */ |
| 1378 | if (edid.panel_bits_per_pixel) |
| 1379 | config->panel_bits_per_pixel = edid.panel_bits_per_pixel; |
| 1380 | if (edid.panel_bits_per_color) |
| 1381 | config->color_depth = edid.panel_bits_per_color; |
| 1382 | printk(BIOS_SPEW, "%s: configuration updated by EDID.\n", __func__); |
| 1383 | } |
| 1384 | |
| 1385 | void dp_init(void *_config) |
| 1386 | { |
| 1387 | struct soc_nvidia_tegra210_config *config = (void *)_config; |
| 1388 | struct tegra_dc *dc = config->dc_data; |
| 1389 | struct tegra_dc_dp_data *dp = &dp_data; |
| 1390 | |
| 1391 | /* set up links among config, dc, dp and sor */ |
| 1392 | dp->dc = dc; |
| 1393 | dc->out = dp; |
| 1394 | dp->sor.dc = dc; |
| 1395 | |
| 1396 | dp->sor.power_is_up = 0; |
| 1397 | dp->sor.base = (void *)TEGRA_ARM_SOR; |
| 1398 | dp->sor.pmc_base = (void *)TEGRA_PMC_BASE; |
| 1399 | dp->sor.portnum = 0; |
| 1400 | dp->sor.link_cfg = &dp->link_cfg; |
| 1401 | dp->aux_base = (void *)TEGRA_ARM_DPAUX; |
| 1402 | dp->link_cfg.is_valid = 0; |
| 1403 | dp->enabled = 0; |
| 1404 | |
| 1405 | tegra_dp_update_config(dp, config); |
| 1406 | } |
| 1407 | |
| 1408 | static void tegra_dp_hpd_config(struct tegra_dc_dp_data *dp, |
| 1409 | struct soc_nvidia_tegra210_config *config) |
| 1410 | { |
| 1411 | u32 val; |
| 1412 | |
| 1413 | val = config->dp.hpd_plug_min_us | |
| 1414 | (config->dp.hpd_unplug_min_us << |
| 1415 | DPAUX_HPD_CONFIG_UNPLUG_MIN_TIME_SHIFT); |
| 1416 | tegra_dpaux_writel(dp, DPAUX_HPD_CONFIG, val); |
| 1417 | |
| 1418 | tegra_dpaux_writel(dp, DPAUX_HPD_IRQ_CONFIG, config->dp.hpd_irq_min_us); |
| 1419 | } |
| 1420 | |
| 1421 | static int tegra_dp_hpd_plug(struct tegra_dc_dp_data *dp, int timeout_ms) |
| 1422 | { |
| 1423 | u32 val; |
| 1424 | u32 timeout = timeout_ms * 1000; |
| 1425 | do { |
| 1426 | val = tegra_dpaux_readl(dp, DPAUX_DP_AUXSTAT); |
| 1427 | if (val & DPAUX_DP_AUXSTAT_HPD_STATUS_PLUGGED) |
| 1428 | return 0; |
| 1429 | udelay(100); |
| 1430 | timeout -= 100; |
| 1431 | } while (timeout > 0); |
| 1432 | return -1; |
| 1433 | } |
| 1434 | |
| 1435 | static int tegra_dc_dp_sink_out_of_sync(struct tegra_dc_dp_data *dp, |
| 1436 | u32 delay_ms) |
| 1437 | { |
| 1438 | u8 dpcd_data; |
| 1439 | int out_of_sync; |
| 1440 | |
| 1441 | mdelay(delay_ms); |
| 1442 | tegra_dc_dp_dpcd_read(dp, NV_DPCD_SINK_STATUS, &dpcd_data); |
| 1443 | |
| 1444 | out_of_sync = ((dpcd_data & NV_DPCD_SINK_STATUS_PORT0_IN_SYNC) != |
| 1445 | NV_DPCD_SINK_STATUS_PORT0_IN_SYNC); |
| 1446 | |
| 1447 | if (out_of_sync) |
| 1448 | printk(BIOS_ERR, |
| 1449 | "SINK receive port 0 is out of synchronization\n"); |
| 1450 | else |
| 1451 | printk(BIOS_INFO, |
| 1452 | "SINK is in synchronization\n"); |
| 1453 | |
| 1454 | return out_of_sync; |
| 1455 | } |
| 1456 | |
| 1457 | static void tegra_dc_dp_check_sink(struct tegra_dc_dp_data *dp, |
| 1458 | struct soc_nvidia_tegra210_config *config) |
| 1459 | { |
| 1460 | |
| 1461 | u8 max_retry = 3; |
| 1462 | int delay_frame; |
| 1463 | |
| 1464 | /* DP TCON may skip some main stream frames, thus we need to wait |
| 1465 | some delay before reading the DPCD SINK STATUS register, starting |
| 1466 | from 5 */ |
| 1467 | delay_frame = 5; |
| 1468 | |
| 1469 | while (tegra_dc_dp_sink_out_of_sync(dp, FRAME_IN_MS * delay_frame) && |
| 1470 | max_retry--) { |
| 1471 | tegra_dc_detach(&dp->sor); |
| 1472 | if (tegra_dc_dp_explore_link_cfg(dp, &dp->link_cfg, config)) { |
| 1473 | printk(BIOS_ERR, "dp: %s: error to configure link\n", |
| 1474 | __func__); |
| 1475 | continue; |
| 1476 | } |
| 1477 | |
| 1478 | tegra_dc_sor_set_power_state(&dp->sor, 1); |
| 1479 | tegra_dc_sor_attach(&dp->sor); |
| 1480 | |
| 1481 | /* Increase delay_frame for next try in case the sink is |
| 1482 | skipping more frames */ |
| 1483 | delay_frame += 10; |
| 1484 | } |
| 1485 | } |
| 1486 | |
| 1487 | void dp_enable(void *_dp) |
| 1488 | { |
| 1489 | struct tegra_dc_dp_data *dp = _dp; |
| 1490 | struct tegra_dc *dc = dp->dc; |
| 1491 | struct soc_nvidia_tegra210_config *config = dc->config; |
| 1492 | |
| 1493 | u8 data; |
| 1494 | u32 retry; |
| 1495 | int ret; |
| 1496 | |
| 1497 | tegra_dc_dpaux_enable(dp); |
| 1498 | |
| 1499 | tegra_dp_hpd_config(dp, config); |
| 1500 | if (tegra_dp_hpd_plug(dp, config->dp.vdd_to_hpd_delay_ms) < 0) { |
| 1501 | printk(BIOS_ERR, "dp: hpd plug failed\n"); |
| 1502 | goto error_enable; |
| 1503 | } |
| 1504 | |
| 1505 | if (tegra_dc_dp_init_max_link_cfg(config, dp, &dp->link_cfg)) { |
| 1506 | printk(BIOS_ERR, "dp: failed to init link configuration\n"); |
| 1507 | goto error_enable; |
| 1508 | } |
| 1509 | |
| 1510 | tegra_dc_sor_enable_dp(&dp->sor); |
| 1511 | |
| 1512 | tegra_dc_sor_set_panel_power(&dp->sor, 1); |
| 1513 | |
| 1514 | /* Write power on to DPCD */ |
| 1515 | data = NV_DPCD_SET_POWER_VAL_D0_NORMAL; |
| 1516 | retry = 0; |
| 1517 | do { |
| 1518 | ret = tegra_dc_dp_dpcd_write(dp, |
| 1519 | NV_DPCD_SET_POWER, data); |
| 1520 | } while ((retry++ < DP_POWER_ON_MAX_TRIES) && ret); |
| 1521 | |
| 1522 | if (ret || retry >= DP_POWER_ON_MAX_TRIES) { |
| 1523 | printk(BIOS_ERR, |
| 1524 | "dp: failed to power on panel (0x%x)\n", ret); |
| 1525 | goto error_enable; |
| 1526 | } |
| 1527 | |
| 1528 | /* Confirm DP is plugging status */ |
| 1529 | if (!(tegra_dpaux_readl(dp, DPAUX_DP_AUXSTAT) & |
| 1530 | DPAUX_DP_AUXSTAT_HPD_STATUS_PLUGGED)) { |
| 1531 | printk(BIOS_ERR, "dp: could not detect HPD\n"); |
| 1532 | goto error_enable; |
| 1533 | } |
| 1534 | |
| 1535 | /* Check DP version */ |
| 1536 | if (tegra_dc_dp_dpcd_read(dp, NV_DPCD_REV, &dp->revision)) |
| 1537 | printk(BIOS_ERR, |
| 1538 | "dp: failed to read the revision number from sink\n"); |
| 1539 | |
| 1540 | if (tegra_dc_dp_explore_link_cfg(dp, &dp->link_cfg, config)) { |
| 1541 | printk(BIOS_ERR, "dp: error to configure link\n"); |
| 1542 | goto error_enable; |
| 1543 | } |
| 1544 | |
| 1545 | tegra_dc_sor_set_power_state(&dp->sor, 1); |
| 1546 | tegra_dc_sor_attach(&dp->sor); |
| 1547 | |
| 1548 | tegra_dc_dp_check_sink(dp, config); |
| 1549 | |
| 1550 | /* |
| 1551 | * Power down the unused lanes to save power |
| 1552 | * (about hundreds milli-watts, varies from boards). |
| 1553 | */ |
| 1554 | tegra_dc_sor_power_down_unused_lanes(&dp->sor); |
| 1555 | |
| 1556 | dp->enabled = 1; |
| 1557 | error_enable: |
| 1558 | return; |
| 1559 | } |
| 1560 | |
Elyes HAOUAS | 3fcb218 | 2018-05-25 10:03:57 +0200 | [diff] [blame] | 1561 | void dp_display_startup(struct device *dev) |
Patrick Georgi | 40a3e32 | 2015-06-22 19:41:29 +0200 | [diff] [blame] | 1562 | { |
| 1563 | struct soc_nvidia_tegra210_config *config = dev->chip_info; |
| 1564 | struct display_controller *disp_ctrl = |
| 1565 | (void *)config->display_controller; |
| 1566 | |
| 1567 | u32 framebuffer_size_mb = config->framebuffer_size / MiB; |
| 1568 | u32 framebuffer_base_mb = config->framebuffer_base / MiB; |
| 1569 | |
| 1570 | struct pwm_controller *pwm = (void *)TEGRA_PWM_BASE; |
| 1571 | struct tegra_dc *dc = &dc_data; |
| 1572 | u32 plld_rate; |
| 1573 | |
| 1574 | printk(BIOS_INFO, "%s: entry: disp_ctrl: %p.\n", |
| 1575 | __func__, disp_ctrl); |
| 1576 | |
| 1577 | if (disp_ctrl == NULL) { |
| 1578 | printk(BIOS_ERR, "Error: No dc is assigned by dt.\n"); |
| 1579 | return; |
| 1580 | } |
| 1581 | |
| 1582 | dc->base = (void *)disp_ctrl; |
| 1583 | dc->config = config; |
| 1584 | config->dc_data = dc; |
| 1585 | |
| 1586 | /* Note dp_init may read EDID and change some config values. */ |
| 1587 | dp_init(config); |
| 1588 | |
| 1589 | if (framebuffer_size_mb == 0) { |
| 1590 | framebuffer_size_mb = ALIGN_UP(config->display_xres * |
| 1591 | config->display_yres * |
| 1592 | (config->framebuffer_bits_per_pixel / 8), MiB)/MiB; |
| 1593 | } |
| 1594 | |
| 1595 | config->framebuffer_size = framebuffer_size_mb * MiB; |
| 1596 | config->framebuffer_base = framebuffer_base_mb * MiB; |
| 1597 | |
| 1598 | /* The plld is programmed with the assumption of the SHIFT_CLK_DIVIDER |
| 1599 | * and PIXEL_CLK_DIVIDER are zero (divide by 1). See the |
| 1600 | * update_display_mode() for detail. |
| 1601 | */ |
| 1602 | plld_rate = clock_configure_plld(config->pixel_clock * 2); |
| 1603 | if (plld_rate == 0) { |
| 1604 | printk(BIOS_ERR, "dc: clock init failed\n"); |
| 1605 | return; |
| 1606 | } else if (plld_rate != config->pixel_clock * 2) { |
| 1607 | printk(BIOS_WARNING, "dc: plld rounded to %u\n", plld_rate); |
| 1608 | config->pixel_clock = plld_rate / 2; |
| 1609 | } |
| 1610 | |
| 1611 | /* set disp1's clock source to PLLD_OUT0 */ |
| 1612 | clock_configure_source(disp1, PLLD, (plld_rate/KHz)/2); |
| 1613 | |
| 1614 | /* Init dc */ |
| 1615 | if (tegra_dc_init(disp_ctrl)) { |
| 1616 | printk(BIOS_ERR, "dc: init failed\n"); |
| 1617 | return; |
| 1618 | } |
| 1619 | |
| 1620 | /* Configure dc mode */ |
| 1621 | if (update_display_mode(disp_ctrl, config)) { |
| 1622 | printk(BIOS_ERR, "dc: failed to configure display mode.\n"); |
| 1623 | return; |
| 1624 | } |
| 1625 | |
| 1626 | /* Enable dp */ |
| 1627 | dp_enable(dc->out); |
| 1628 | |
| 1629 | /* Set up Tegra PWM n (where n is specified in config->dp.pwm) to drive the |
| 1630 | * panel backlight. |
| 1631 | */ |
| 1632 | printk(BIOS_SPEW, "%s: enable panel backlight pwm\n", __func__); |
| 1633 | WRITEL(((1 << NV_PWM_CSR_ENABLE_SHIFT) | |
| 1634 | (220 << NV_PWM_CSR_PULSE_WIDTH_SHIFT) | /* 220/256 */ |
| 1635 | 0x02e), /* frequency divider */ |
| 1636 | &pwm->pwm[config->dp.pwm].csr); |
| 1637 | |
| 1638 | /* Set up window */ |
| 1639 | update_window(config); |
| 1640 | printk(BIOS_INFO, "%s: display init done.\n", __func__); |
| 1641 | |
| 1642 | /* Save panel mode to cb tables */ |
| 1643 | pass_mode_info_to_payload(config); |
| 1644 | |
| 1645 | /* |
| 1646 | * After this point, it is payload's responsibility to allocate |
| 1647 | * framebuffer and sets the base address to dc's |
| 1648 | * WINBUF_START_ADDR register and enables window by setting dc's |
| 1649 | * DISP_DISP_WIN_OPTIONS register. |
| 1650 | */ |
| 1651 | } |