Frank Vibrans | 2b4c831 | 2011-02-14 18:30:54 +0000 | [diff] [blame] | 1 | /* |
| 2 | ***************************************************************************** |
| 3 | * |
| 4 | * Copyright (c) 2011, Advanced Micro Devices, Inc. |
| 5 | * All rights reserved. |
Edward O'Callaghan | b9a6700 | 2014-07-06 19:29:03 +1000 | [diff] [blame^] | 6 | * |
Frank Vibrans | 2b4c831 | 2011-02-14 18:30:54 +0000 | [diff] [blame] | 7 | * Redistribution and use in source and binary forms, with or without |
| 8 | * modification, are permitted provided that the following conditions are met: |
| 9 | * * Redistributions of source code must retain the above copyright |
| 10 | * notice, this list of conditions and the following disclaimer. |
| 11 | * * Redistributions in binary form must reproduce the above copyright |
| 12 | * notice, this list of conditions and the following disclaimer in the |
| 13 | * documentation and/or other materials provided with the distribution. |
Edward O'Callaghan | b9a6700 | 2014-07-06 19:29:03 +1000 | [diff] [blame^] | 14 | * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| 15 | * its contributors may be used to endorse or promote products derived |
Frank Vibrans | 2b4c831 | 2011-02-14 18:30:54 +0000 | [diff] [blame] | 16 | * from this software without specific prior written permission. |
Edward O'Callaghan | b9a6700 | 2014-07-06 19:29:03 +1000 | [diff] [blame^] | 17 | * |
Frank Vibrans | 2b4c831 | 2011-02-14 18:30:54 +0000 | [diff] [blame] | 18 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| 19 | * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| 20 | * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| 21 | * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| 22 | * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| 23 | * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| 24 | * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| 25 | * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 26 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| 27 | * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
Edward O'Callaghan | b9a6700 | 2014-07-06 19:29:03 +1000 | [diff] [blame^] | 28 | * |
Frank Vibrans | 2b4c831 | 2011-02-14 18:30:54 +0000 | [diff] [blame] | 29 | * *************************************************************************** |
| 30 | * |
| 31 | */ |
| 32 | |
| 33 | #pragma pack (push, 1) |
| 34 | |
| 35 | #define CIMX_SB_REVISION "1.1.0.6" |
| 36 | #define CIMX_SB_ID "SB80A13" |
| 37 | #ifndef SBCIMx_Version |
| 38 | #define SBCIMx_Version 0x1106 |
| 39 | #endif //CIMx_Version |
| 40 | |
| 41 | |
| 42 | /*--------------------------- Documentation Pages ---------------------------*/ |
| 43 | /** |
| 44 | * @page SB_POWERON_INIT_Page SB_POWERON_INIT |
| 45 | * @section SB_POWERON_INIT Interface Call |
| 46 | * Initialize structure referenced by AMDSBCFG to default recommended value. |
| 47 | * @subsection SB_POWERON_INIT_CallIn Call Prototype |
| 48 | * @par |
| 49 | * sbPowerOnInit ((AMDSBCFG*) pConfig) (Followed PH Interface) |
| 50 | * @subsection SB_BEFORE_PCI_INIT_CallID Service ID |
| 51 | * @par |
| 52 | * <TABLE border="0"> |
| 53 | * <TR><TD class="indexkey" width=380> SB_POWERON_INIT --> 0x00010001 </TD></TR> |
| 54 | * </TABLE> |
| 55 | * @subsection SB_POWERON_INIT_CallOut Prepare for Callout |
| 56 | * @par |
| 57 | * Not Applicable (Not necessary for the current implementation) |
| 58 | * @subsection SB_POWERON_INIT_Config Prepare for Configuration Data. |
| 59 | * @par |
| 60 | * <TABLE border="0"> |
| 61 | * <TR><TD class="indexkey" width=380> BUILDPARAM::BiosSize </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 62 | * <TR><TD class="indexkey" width=380> BUILDPARAM::LegacyFree </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 63 | * <TR><TD class="indexkey" width=380> BUILDPARAM::EcKbd </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 64 | * <TR><TD class="indexkey" width=380> BUILDPARAM::Smbus0BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 65 | * <TR><TD class="indexkey" width=380> BUILDPARAM::Smbus1BaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 66 | * <TR><TD class="indexkey" width=380> BUILDPARAM::SioPmeBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 67 | * <TR><TD class="indexkey" width=380> BUILDPARAM::WatchDogTimerBase </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 68 | * <TR><TD class="indexkey" width=380> BUILDPARAM::GecShadowRomBase </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 69 | * <TR><TD class="indexkey" width=380> BUILDPARAM::SpiRomBaseAddress </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 70 | * <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiPm1EvtBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 71 | * <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiPm1CntBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 72 | * <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiPmTmrBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 73 | * <TR><TD class="indexkey" width=380> BUILDPARAM::CpuControlBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 74 | * <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiGpe0BlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 75 | * <TR><TD class="indexkey" width=380> BUILDPARAM::SmiCmdPortAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 76 | * <TR><TD class="indexkey" width=380> BUILDPARAM::AcpiPmaCntBlkAddr </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 77 | * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 78 | * <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 79 | * </TABLE> |
| 80 | * |
| 81 | */ |
| 82 | #define SB_POWERON_INIT 0x00010001 |
| 83 | #define OUTDEBUG_PORT 0x00010002 |
| 84 | /*--------------------------- Documentation Pages ---------------------------*/ |
| 85 | /** |
| 86 | * @page SB_BEFORE_PCI_INIT_Page SB_BEFORE_PCI_INIT |
| 87 | * @section SB_BEFORE_PCI_INIT Interface Call |
| 88 | * Initialize structure referenced by AMDSBCFG to default recommended value. |
| 89 | * @subsection SB_BEFORE_PCI_INIT_CallIn Call Prototype |
| 90 | * @par |
| 91 | * sbBeforePciInit ((AMDSBCFG*)pConfig) (Followed PH Interface) |
| 92 | * @subsection SB_BEFORE_PCI_INIT_CallID Service ID |
| 93 | * @par |
| 94 | * <TABLE border="0"> |
| 95 | * <TR><TD class="indexkey" width=380> SB_BEFORE_PCI_INIT --> 0x00010010 </TD></TR> |
| 96 | * </TABLE> |
| 97 | * @subsection SB_BEFORE_PCI_INIT_CallOut Prepare for Callout |
| 98 | * @par |
| 99 | * <TABLE border="0"> |
| 100 | * <TR><TD class="indexkey" width=380> @ref CB_SBGPP_RESET_ASSERT_Page "CB_SBGPP_RESET_ASSERT"</TD></TR> |
| 101 | * <TR><TD class="indexkey" width=380> @ref CB_SBGPP_RESET_DEASSERT_Page "CB_SBGPP_RESET_DEASSERT"</TD></TR> |
| 102 | * </TABLE> |
| 103 | * @subsection SB_BEFORE_PCI_INIT_Config Prepare for Configuration Data. |
| 104 | * @par |
| 105 | * <TABLE border="0"> |
| 106 | * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 107 | * <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 108 | * <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 109 | * <TR><TD class="indexkey" width=380> AMDSBCFG::SataIdeMode </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 110 | * <TR><TD class="indexkey" width=380> AMDSBCFG::USBDeviceConfig </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 111 | * <TR><TD class="indexkey" width=380> AMDSBCFG::GecConfig </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 112 | * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaController </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 113 | * <TR><TD class="indexkey" width=380> AMDSBCFG::PciClks </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 114 | * <TR><TD class="indexkey" width=380> BUILDPARAM::SataIDESsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 115 | * <TR><TD class="indexkey" width=380> BUILDPARAM::SataRAID5Ssid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 116 | * <TR><TD class="indexkey" width=380> BUILDPARAM::SataRAIDSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 117 | * <TR><TD class="indexkey" width=380> BUILDPARAM::SataAHCISsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 118 | * <TR><TD class="indexkey" width=380> BUILDPARAM::SmbusSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 119 | * <TR><TD class="indexkey" width=380> BUILDPARAM::LpcSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 120 | * <TR><TD class="indexkey" width=380> BUILDPARAM::PCIBSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 121 | * </TABLE> |
| 122 | * |
| 123 | */ |
| 124 | #define SB_BEFORE_PCI_INIT 0x00010010 |
| 125 | /*--------------------------- Documentation Pages ---------------------------*/ |
| 126 | /** |
| 127 | * @page SB_AFTER_PCI_INIT_Page SB_AFTER_PCI_INIT |
| 128 | * @section SB_AFTER_PCI_INIT Interface Call |
| 129 | * Initialize structure referenced by AMDSBCFG to default recommended value. |
| 130 | * @subsection SB_AFTER_PCI_INIT_CallIn Call Prototype |
| 131 | * @par |
| 132 | * sbAfterPciInit ((AMDSBCFG*)pConfig) (Followed PH Interface) |
| 133 | * @subsection SB_AFTER_PCI_INIT_CallID Service ID |
| 134 | * @par |
| 135 | * <TABLE border="0"> |
| 136 | * <TR><TD class="indexkey" width=380> SB_AFTER_PCI_INIT --> 0x00010020 </TD></TR> |
| 137 | * </TABLE> |
| 138 | * @subsection SB_AFTER_PCI_INIT_CallOut Prepare for Callout |
| 139 | * @par |
| 140 | * Not Applicable (Not necessary for the current implementation) |
| 141 | * @subsection SB_AFTER_PCI_INIT_Config Prepare for Configuration Data. |
| 142 | * @par |
| 143 | * <TABLE border="0"> |
| 144 | * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 145 | * <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 146 | * <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 147 | * <TR><TD class="indexkey" width=380> AMDSBCFG::SataEspPort </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 148 | * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaController </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 149 | * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaPinCfg </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 150 | * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaSdinPin </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 151 | * <TR><TD class="indexkey" width=380> BUILDPARAM::OhciSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 152 | * <TR><TD class="indexkey" width=380> BUILDPARAM::Ohci4Ssid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 153 | * <TR><TD class="indexkey" width=380> BUILDPARAM::EhciSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 154 | * <TR><TD class="indexkey" width=380> BUILDPARAM::AzaliaSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 155 | * </TABLE> |
| 156 | * |
| 157 | */ |
| 158 | #define SB_AFTER_PCI_INIT 0x00010020 |
| 159 | /*--------------------------- Documentation Pages ---------------------------*/ |
| 160 | /** |
| 161 | * @page SB_MID_POST_INIT_Page SB_MID_POST_INIT |
| 162 | * @section SB_MID_POST_INIT Interface Call |
| 163 | * Initialize structure referenced by AMDSBCFG to default recommended value. |
| 164 | * @subsection SB_MID_POST_INIT_CallIn Call Prototype |
| 165 | * @par |
| 166 | * sbMidPostInit ((AMDSBCFG*)pConfig) (Followed PH Interface) |
| 167 | * @subsection SB_MID_POST_INIT_CallID Service ID |
| 168 | * @par |
| 169 | * <TABLE border="0"> |
| 170 | * <TR><TD class="indexkey" width=380> SB_MID_POST_INIT --> 0x00010021 </TD></TR> |
| 171 | * </TABLE> |
| 172 | * @subsection SB_MID_POST_INIT_CallOut Prepare for Callout |
| 173 | * @par |
| 174 | * Not Applicable (Not necessary for the current implementation) |
| 175 | * @subsection SB_MID_POST_INIT_Config Prepare for Configuration Data. |
| 176 | * @par |
| 177 | * <TABLE border="0"> |
| 178 | * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 179 | * <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 180 | * </TABLE> |
| 181 | * |
| 182 | */ |
| 183 | #define SB_MID_POST_INIT 0x00010021 |
| 184 | /*--------------------------- Documentation Pages ---------------------------*/ |
| 185 | /** |
| 186 | * @page SB_LATE_POST_INIT_Page SB_LATE_POST_INIT |
| 187 | * @section SB_LATE_POST_INIT Interface Call |
| 188 | * Initialize structure referenced by AMDSBCFG to default recommended value. |
| 189 | * @subsection SB_LATE_POST_INIT_CallIn Call Prototype |
| 190 | * @par |
| 191 | * sbLatePost ((AMDSBCFG*)pConfig) (Followed PH Interface) |
| 192 | * @subsection SB_LATE_POST_INIT_CallID Service ID |
| 193 | * @par |
| 194 | * <TABLE border="0"> |
| 195 | * <TR><TD class="indexkey" width=380> SB_LATE_POST_INIT --> 0x00010030 </TD></TR> |
| 196 | * </TABLE> |
| 197 | * @subsection SB_LATE_POST_INIT_CallOut Prepare for Callout |
| 198 | * @par |
| 199 | * Not Applicable (Not necessary for the current implementation) |
| 200 | * @subsection SB_LATE_POST_INIT_Config Prepare for Configuration Data. |
| 201 | * @par |
| 202 | * <TABLE border="0"> |
| 203 | * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 204 | * <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 205 | * <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 206 | * </TABLE> |
| 207 | * |
| 208 | */ |
| 209 | #define SB_LATE_POST_INIT 0x00010030 |
| 210 | /*--------------------------- Documentation Pages ---------------------------*/ |
| 211 | /** |
| 212 | * @page SB_BEFORE_PCI_RESTORE_INIT_Page SB_BEFORE_PCI_RESTORE_INIT |
| 213 | * @section SB_BEFORE_PCI_RESTORE_INIT Interface Call |
| 214 | * Initialize structure referenced by AMDSBCFG to default recommended value. |
| 215 | * @subsection SB_BEFORE_PCI_RESTORE_INIT_CallIn Call Prototype |
| 216 | * @par |
| 217 | * sbBeforePciRestoreInit ((AMDSBCFG*)pConfig) (Followed PH Interface) |
| 218 | * @subsection SB_BEFORE_PCI_RESTORE_INIT_CallID Service ID |
| 219 | * @par |
| 220 | * <TABLE border="0"> |
| 221 | * <TR><TD class="indexkey" width=380> SB_BEFORE_PCI_RESTORE_INIT --> 0x00010040 </TD></TR> |
| 222 | * </TABLE> |
| 223 | * @subsection SB_BEFORE_PCI_RESTORE_INIT_CallOut Prepare for Callout |
| 224 | * @par |
| 225 | * <TABLE border="0"> |
| 226 | * <TR><TD class="indexkey" width=380> @ref CB_SBGPP_RESET_ASSERT_Page "CB_SBGPP_RESET_ASSERT"</TD></TR> |
| 227 | * <TR><TD class="indexkey" width=380> @ref CB_SBGPP_RESET_DEASSERT_Page "CB_SBGPP_RESET_DEASSERT"</TD></TR> |
| 228 | * </TABLE> |
| 229 | * @subsection SB_BEFORE_PCI_RESTORE_INIT_Config Prepare for Configuration Data. |
| 230 | * @par |
| 231 | * <TABLE border="0"> |
| 232 | * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 233 | * <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 234 | * <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 235 | * <TR><TD class="indexkey" width=380> AMDSBCFG::SataIdeMode </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 236 | * <TR><TD class="indexkey" width=380> AMDSBCFG::USBDeviceConfig </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 237 | * <TR><TD class="indexkey" width=380> AMDSBCFG::GecConfig </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 238 | * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaController </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 239 | * <TR><TD class="indexkey" width=380> AMDSBCFG::PciClks </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 240 | * <TR><TD class="indexkey" width=380> BUILDPARAM::SataIDESsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 241 | * <TR><TD class="indexkey" width=380> BUILDPARAM::SataRAID5Ssid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 242 | * <TR><TD class="indexkey" width=380> BUILDPARAM::SataRAIDSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 243 | * <TR><TD class="indexkey" width=380> BUILDPARAM::SataAHCISsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 244 | * <TR><TD class="indexkey" width=380> BUILDPARAM::SmbusSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 245 | * <TR><TD class="indexkey" width=380> BUILDPARAM::LpcSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 246 | * <TR><TD class="indexkey" width=380> BUILDPARAM::PCIBSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 247 | * </TABLE> |
| 248 | * |
| 249 | */ |
| 250 | #define SB_BEFORE_PCI_RESTORE_INIT 0x00010040 |
| 251 | /*--------------------------- Documentation Pages ---------------------------*/ |
| 252 | /** |
| 253 | * @page SB_AFTER_PCI_RESTORE_INIT_Page SB_AFTER_PCI_RESTORE_INIT |
| 254 | * @section SB_AFTER_PCI_RESTORE_INIT Interface Call |
| 255 | * Initialize structure referenced by AMDSBCFG to default recommended value. |
| 256 | * @subsection SB_AFTER_PCI_RESTORE_INIT_CallIn Call Prototype |
| 257 | * @par |
| 258 | * sbAfterPciRestoreInit ((AMDSBCFG*)pConfig) (Followed PH Interface) |
| 259 | * @subsection SB_AFTER_PCI_RESTORE_INIT_CallID Service ID |
| 260 | * @par |
| 261 | * <TABLE border="0"> |
| 262 | * <TR><TD class="indexkey" width=380> SB_AFTER_PCI_RESTORE_INIT --> 0x00010050 </TD></TR> |
| 263 | * </TABLE> |
| 264 | * @subsection SB_AFTER_PCI_RESTORE_INIT_CallOut Prepare for Callout |
| 265 | * @par |
| 266 | * Not Applicable (Not necessary for the current implementation) |
| 267 | * @subsection SB_AFTER_PCI_RESTORE_INIT_Config Prepare for Configuration Data. |
| 268 | * @par |
| 269 | * <TABLE border="0"> |
| 270 | * <TR><TD class="indexkey" width=380> SATAST::SataController </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 271 | * <TR><TD class="indexkey" width=380> SATAST::SataIdeCombinedMode </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 272 | * <TR><TD class="indexkey" width=380> AMDSBCFG::SataClass </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 273 | * <TR><TD class="indexkey" width=380> AMDSBCFG::SataEspPort </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 274 | * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaController </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 275 | * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaPinCfg </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 276 | * <TR><TD class="indexkey" width=380> AMDSBCFG::AzaliaSdinPin </TD><TD class="indexvalue"><B>Required </B></TD></TR> |
| 277 | * <TR><TD class="indexkey" width=380> BUILDPARAM::OhciSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 278 | * <TR><TD class="indexkey" width=380> BUILDPARAM::Ohci4Ssid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 279 | * <TR><TD class="indexkey" width=380> BUILDPARAM::EhciSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 280 | * <TR><TD class="indexkey" width=380> BUILDPARAM::AzaliaSsid </TD><TD class="indexvalue"><B> Optional </B></TD></TR> |
| 281 | * </TABLE> |
| 282 | * |
| 283 | */ |
| 284 | #define SB_AFTER_PCI_RESTORE_INIT 0x00010050 |
| 285 | /*--------------------------- Documentation Pages ---------------------------*/ |
| 286 | /** |
| 287 | * @page SB_SMM_SERVICE_Page SB_SMM_SERVICE |
| 288 | * @section SB_SMM_SERVICE Interface Call |
| 289 | * Initialize structure referenced by AMDSBCFG to default recommended value. |
| 290 | * @subsection SB_SMM_SERVICE_CallIn Call Prototype |
| 291 | * @par |
| 292 | * sbSmmService ((AMDSBCFG*)pConfig) (Followed PH Interface) |
| 293 | * @subsection SB_SMM_SERVICE_CallID Service ID |
| 294 | * @par |
| 295 | * <TABLE border="0"> |
| 296 | * <TR><TD class="indexkey" width=380> SB_SMM_SERVICE --> 0x00010060 </TD></TR> |
| 297 | * </TABLE> |
| 298 | * @subsection SB_SMM_SERVICE_CallOut Prepare for Callout |
| 299 | * @par |
| 300 | * Not Applicable (Not necessary for the current implementation) |
| 301 | * @subsection SB_SMM_SERVICE_Config Prepare for Configuration Data. |
| 302 | * @par |
| 303 | * Not necessary on current implementation |
| 304 | * |
| 305 | */ |
| 306 | #define SB_SMM_SERVICE 0x00010060 |
| 307 | /*--------------------------- Documentation Pages ---------------------------*/ |
| 308 | /** |
| 309 | * @page SB_SMM_ACPION_Page SB_SMM_ACPION |
| 310 | * @section SB_SMM_ACPION Interface Call |
| 311 | * Initialize structure referenced by AMDSBCFG to default recommended value. |
| 312 | * @subsection SB_SMM_ACPION_CallIn Call Prototype |
| 313 | * @par |
| 314 | * sbSmmAcpiOn ((AMDSBCFG*)pConfig) (Followed PH Interface) |
| 315 | * @subsection SB_SMM_ACPION_CallID Service ID |
| 316 | * @par |
| 317 | * <TABLE border="0"> |
| 318 | * <TR><TD class="indexkey" width=380> SB_SMM_ACPION --> 0x00010061 </TD></TR> |
| 319 | * </TABLE> |
| 320 | * @subsection SB_SMM_ACPION_CallOut Prepare for Callout |
| 321 | * @par |
| 322 | * Not Applicable (Not necessary for the current implementation) |
| 323 | * @subsection SB_SMM_ACPION_Config Prepare for Configuration Data. |
| 324 | * @par |
| 325 | * Not necessary on current implementation |
| 326 | * |
| 327 | */ |
| 328 | #define SB_SMM_ACPION 0x00010061 |
| 329 | #define SB_EC_FANCONTROL 0x00010070 |
| 330 | |
| 331 | #ifndef OEM_CALLBACK_BASE |
| 332 | #define OEM_CALLBACK_BASE 0x00010100 |
| 333 | #endif |
| 334 | |
| 335 | //0x00 - 0x0F callback functions are reserved for bootblock |
| 336 | #define SATA_PHY_PROGRAMMING OEM_CALLBACK_BASE + 0x10 |
| 337 | #define PULL_UP_PULL_DOWN_SETTINGS OEM_CALLBACK_BASE + 0x20 |
| 338 | /*--------------------------- Documentation Pages ---------------------------*/ |
| 339 | /** |
| 340 | * @page CB_SBGPP_RESET_ASSERT_Page CB_SBGPP_RESET_ASSERT |
| 341 | * @section CB_SBGPP_RESET_ASSERT Interface Call |
| 342 | * Initialize structure referenced by AMDSBCFG to default recommended value. |
| 343 | * @subsection CB_SBGPP_RESET_ASSERT_CallID Service ID |
| 344 | * @par |
| 345 | * <TABLE border="0"> |
| 346 | * <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_ASSERT --> 0x00010130 </TD></TR> |
| 347 | * </TABLE> |
| 348 | * @subsection CB_SBGPP_RESET_ASSERT_Config Prepare for Configuration Data. |
| 349 | * @par |
| 350 | * Not necessary on current implementation |
| 351 | * |
| 352 | */ |
| 353 | #define CB_SBGPP_RESET_ASSERT OEM_CALLBACK_BASE + 0x30 |
| 354 | /*--------------------------- Documentation Pages ---------------------------*/ |
| 355 | /** |
| 356 | * @page CB_SBGPP_RESET_DEASSERT_Page CB_SBGPP_RESET_DEASSERT |
| 357 | * @section CB_SBGPP_RESET_DEASSERT Interface Call |
| 358 | * Initialize structure referenced by AMDSBCFG to default recommended value. |
| 359 | * @subsection CB_SBGPP_RESET_DEASSERT _CallID Service ID |
| 360 | * @par |
| 361 | * <TABLE border="0"> |
| 362 | * <TR><TD class="indexkey" width=380> CB_SBGPP_RESET_DEASSERT --> 0x00010131 </TD></TR> |
| 363 | * </TABLE> |
| 364 | * @subsection CB_SBGPP_RESET_DEASSERT _Config Prepare for Configuration Data. |
| 365 | * @par |
| 366 | * Not necessary on current implementation |
| 367 | * |
| 368 | */ |
| 369 | #define CB_SBGPP_RESET_DEASSERT OEM_CALLBACK_BASE + 0x31 |
| 370 | |
| 371 | #define IMC_FIRMWARE_FAIL OEM_CALLBACK_BASE + 0x40 |
| 372 | |
| 373 | #define CFG_ADDR_PORT 0xCF8 |
| 374 | #define CFG_DATA_PORT 0xCFC |
| 375 | |
| 376 | #define ALINK_ACCESS_INDEX 0x0CD8 |
| 377 | #define ALINK_ACCESS_DATA ALINK_ACCESS_INDEX + 4 |
| 378 | |
| 379 | /*------------------------------------------------------------------ |
| 380 | ; I/O Base Address - Should be set by host BIOS |
| 381 | ;------------------------------------------------------------------ */ |
| 382 | #define DELAY_PORT 0x0E0 |
| 383 | |
| 384 | /*------------------------------------------------------------------ |
| 385 | ; Fuse ID and minor ID of efuse bits |
| 386 | ;------------------------------------------------------------------ */ |
| 387 | #define FUSE_ID_EFUSE_LOC 0x1F // efuse bits 248-255 |
| 388 | #define MINOR_ID_EFUSE_LOC 0x1E // efuse bits 240-247 |
| 389 | #define M1_D1_FUSE_ID 0x70 |
| 390 | #define M1_MINOR_ID 0x02 |
| 391 | |
| 392 | /*------------------------------------------------------------------ |
| 393 | ; DEBUG_PORT = 8-bit I/O Port Address for POST Code Display |
| 394 | ;------------------------------------------------------------------ */ |
| 395 | // ASIC VendorID and DeviceIDs |
| 396 | #define AMD_SB_VID 0x1002 |
| 397 | #define SB_DEVICE_ID 0x4385 /* AMD ER SB800 */ |
| 398 | #define V_SB_SATA_VID AMD_SB_VID // dev 17 Func 0 |
| 399 | #define V_SB_SATA_DID 0x4390 |
| 400 | #define V_SB_SATA_AHCI_DID 0x4391 |
| 401 | #define V_SB_SATA_RAID_DID 0x4392 |
| 402 | #define V_SB_SATA_RAID5_DID 0x4393 |
| 403 | #define V_SB_USB_OHCI_VID AMD_SB_VID // dev 18 Func 0, dev 19 Func 0, dev 22 Func 0 |
| 404 | #define V_SB_USB_OHCI_DID 0x4397 |
| 405 | #define V_SB_USB_EHCI_VID AMD_SB_VID // dev 18 Func 2, dev 19 Func 2, dev 22 Func 2 |
| 406 | #define V_SB_USB_EHCI_DID 0x4396 |
| 407 | #define V_SB_SMBUS_VID AMD_SB_VID // dev 20 Func 0 |
| 408 | #define V_SB_SMBUS_DID 0x4385 |
| 409 | #define V_SB_IDE_VID AMD_SB_VID // dev 20 Func 1 |
| 410 | #define V_SB_IDE_DID 0x439C |
| 411 | #define V_SB_AZALIA_VID AMD_SB_VID // dev 20 Func 2 |
| 412 | #define V_SB_AZALIA_DID 0x4383 |
| 413 | #define V_SB_LPC_VID AMD_SB_VID // dev 20 Func 3 |
| 414 | #define V_SB_LPC_DID 0x439D |
| 415 | #define V_SB_PCIB_VID AMD_SB_VID // dev 20 Func 4 |
| 416 | #define V_SB_PCIB_DID 0x4384 |
| 417 | #define V_SB_USB_OHCIF_VID AMD_SB_VID // dev 20 Func 5 |
| 418 | #define V_SB_USB_OHCIF_DID 0x4399 |
| 419 | #define V_SB_NIC_VID 0x14E4 // dev 20 Func 6 |
| 420 | #define V_SB_NIC_DID 0x1699 |
| 421 | |
| 422 | //Misc |
| 423 | #define ACPI_SMI_CMD_PORT 0xB0 |
| 424 | #define ACPI_SMI_DATA_PORT 0xB1 |
| 425 | #define R_SB_ACPI_PM1_STATUS 0x00 |
| 426 | #define R_SB_ACPI_PM1_ENABLE 0x02 |
| 427 | #define R_SB_ACPI_PM_CONTROL 0x04 |
| 428 | #define R_SB_ACPI_EVENT_STATUS 0x20 |
| 429 | #define R_SB_ACPI_EVENT_ENABLE 0x24 |
| 430 | #define R_SB_PM_ACPI_PMA_CNT_BLK_LO 0x2C |
| 431 | |
| 432 | #define SATA_BUS_DEV_FUN ((0x11 << 3) + 0) |
| 433 | #define SB_SATA1_BUS 0 |
| 434 | #define SB_SATA1_DEV 17 |
| 435 | #define SB_SATA1_FUNC 0 |
| 436 | |
| 437 | #define FC_BUS_DEV_FUN ((0x11 << 3) + 1) |
| 438 | #define USB1_OHCI_BUS_DEV_FUN ((0x12 << 3) + 0) // PORT 0-4 |
| 439 | #define SB_OHCI1_BUS 0 |
| 440 | #define SB_OHCI1_DEV 18 |
| 441 | #define SB_OHCI1_FUNC 0 |
| 442 | #define USB2_OHCI_BUS_DEV_FUN ((0x13 << 3) + 0) // PORT 5-9 |
| 443 | #define SB_OHCI2_BUS 0 |
| 444 | #define SB_OHCI2_DEV 19 |
| 445 | #define SB_OHCI2_FUNC 0 |
| 446 | #define USB3_OHCI_BUS_DEV_FUN ((0x16 << 3) + 0) // PORT 10-13 |
| 447 | #define SB_OHCI3_BUS 0 |
| 448 | #define SB_OHCI3_DEV 22 |
| 449 | #define SB_OHCI3_FUNC 0 |
| 450 | #define USB1_EHCI_BUS_DEV_FUN ((0x12 << 3) + 2) // PORT 0-4 |
| 451 | #define SB_EHCI1_BUS 0 |
| 452 | #define SB_EHCI1_DEV 18 |
| 453 | #define SB_EHCI1_FUNC 2 |
| 454 | #define USB2_EHCI_BUS_DEV_FUN ((0x13 << 3) + 2) // PORT 5-9 |
| 455 | #define SB_EHCI2_BUS 0 |
| 456 | #define SB_EHCI2_DEV 19 |
| 457 | #define SB_EHCI2_FUNC 2 |
| 458 | #define USB3_EHCI_BUS_DEV_FUN ((0x16 << 3) + 2) // PORT 10-13 |
| 459 | #define SB_EHCI3_BUS 0 |
| 460 | #define SB_EHCI3_DEV 22 |
| 461 | #define SB_EHCI3_FUNC 2 |
| 462 | |
| 463 | #define SMBUS_BUS_DEV_FUN ((0x14 << 3) + 0) |
| 464 | #define SB_ISA_BUS 0 |
| 465 | #define SB_ISA_DEV 20 |
| 466 | #define SB_ISA_FUNC 0 |
| 467 | #define IDE_BUS_DEV_FUN ((0x14 << 3) + 1) |
| 468 | #define SB_IDE_BUS 0 |
| 469 | #define SB_IDE_DEV 20 |
| 470 | #define SB_IDE_FUNC 1 |
| 471 | #define AZALIA_BUS_DEV_FUN ((0x14 << 3) + 2) |
| 472 | #define SB_AZALIA_BUS 0 |
| 473 | #define SB_AZALIA_DEV 20 |
| 474 | #define SB_AZALIA_FUNC 2 |
| 475 | #define LPC_BUS_DEV_FUN ((0x14 << 3) + 3) |
| 476 | #define SB_LPC_BUS 0 |
| 477 | #define SB_LPC_DEV 20 |
| 478 | #define SB_LPC_FUNC 3 |
| 479 | #define PCIB_BUS_DEV_FUN ((0x14 << 3) + 4) // P2P in SB700 |
| 480 | #define SB_PCI_BUS 0 |
| 481 | #define SB_PCI_DEV 20 |
| 482 | #define SB_PCI_FUNC 4 |
| 483 | #define USB4_OHCI_BUS_DEV_FUN ((0x14 << 3) + 5) // PORT FL0 - FL1 |
| 484 | #define SB_OHCI4_BUS 0 |
| 485 | #define SB_OHCI4_DEV 20 |
| 486 | #define SB_OHCI4_FUNC 5 |
| 487 | //Gigabyte Ethernet Controller |
| 488 | #define GEC_BUS_DEV_FUN ((0x14 << 3) + 6) |
| 489 | #define SB_GBEC_BUS 0 |
| 490 | #define SB_GBEC_DEV 20 |
| 491 | #define SB_GBEC_FUNC 6 |
| 492 | |
| 493 | #define SB_GPP_BUS 0 |
| 494 | #define SB_GPP_DEV 21 |
| 495 | #define SB_GPP_FUNC 0 |
| 496 | #define GPP0_BUS_DEV_FUN ((0x15 << 3) + 0) // GPP P2P bridge PORT0 |
| 497 | #define GPP1_BUS_DEV_FUN ((0x15 << 3) + 1) // GPP P2P bridge PORT1 |
| 498 | #define GPP2_BUS_DEV_FUN ((0x15 << 3) + 2) // GPP P2P bridge PORT2 |
| 499 | #define GPP3_BUS_DEV_FUN ((0x15 << 3) + 3) // GPP P2P bridge PORT3 |
| 500 | |
| 501 | #define ACPI_MMIO_BASE 0xFED80000 |
| 502 | #define SB_CFG_BASE 0x000 // DWORD |
| 503 | #define GPIO_BASE 0x100 // BYTE |
| 504 | #define SMI_BASE 0x200 // DWORD |
| 505 | #define PMIO_BASE 0x300 // DWORD |
| 506 | #define PMIO2_BASE 0x400 // BYTE |
| 507 | #define BIOS_RAM_BASE 0x500 // BYTE |
| 508 | #define CMOS_RAM_BASE 0x600 // BYTE |
| 509 | #define CMOS_BASE 0x700 // BYTE |
| 510 | #define ASF_BASE 0x900 // DWORD |
| 511 | #define SMBUS_BASE 0xA00 // DWORD |
| 512 | #define WATCHDOG_BASE 0xB00 // ?? |
| 513 | #define HPET_BASE 0xC00 // DWORD |
| 514 | #define IOMUX_BASE 0xD00 // BYTE |
| 515 | #define MISC_BASE 0xE00 |
| 516 | |
| 517 | #define GPP_EFUSE_LOCATION 0x14 // bit 160 |
| 518 | #define GPP_GEN2_EFUSE_BIT BIT0 |
| 519 | |
| 520 | // RegSpace field (AB_INDEX[31:29] |
| 521 | #define AXINDC 0 // AXINDC |
| 522 | #define AXINDP 2 // AXINDP |
| 523 | #define ABCFG 6 // ABCFG |
| 524 | #define AXCFG 4 // AXCFG |
| 525 | #define RCINDXC 1 // PCIEIND |
| 526 | #define RCINDXP 3 // PCIEIND_P |
| 527 | |
| 528 | #define SBTEMP_BUS 8 |
| 529 | #define GPP_DEV_NUM 21 //?? Code style different |
| 530 | #define MAX_GPP_PORTS 4 |
| 531 | #ifndef TRUE |
| 532 | #define TRUE 1 |
| 533 | #endif |
| 534 | #ifndef FALSE |
| 535 | #define FALSE 0 |
| 536 | #endif |
| 537 | // |
| 538 | // ABCFG Registers |
| 539 | // |
| 540 | #define SB_ABCFG_REG00 0x00 // VENDOR ID |
| 541 | #define SB_ABCFG_REG08 0x08 // REVISION ID |
| 542 | #define SB_ABCFG_REG40 0x40 // BL_EVENTCNT0LO |
| 543 | #define SB_ABCFG_REG44 0x44 // BL_EVENTCNT1LO |
| 544 | #define SB_ABCFG_REG48 0x48 // BL_EVENTCNTSEL |
| 545 | #define SB_ABCFG_REG4A 0x4A // BL_EVENTCNT0HI |
| 546 | #define SB_ABCFG_REG4B 0x4B // BL_EVENTCNT1HI |
| 547 | #define SB_ABCFG_REG4C 0x4C // BL_EVENTCNTCTL |
| 548 | #define SB_ABCFG_REG50 0x50 // MISCCTL_50 |
| 549 | #define SB_ABCFG_REG54 0x54 // MISCCTL_54 |
| 550 | #define SB_ABCFG_REG58 0x58 // BL RAB CONTROL |
| 551 | |
| 552 | #define SB_ABCFG_REG60 0x60 // LINKWIDTH_CTL |
| 553 | #define SB_ABCFG_REG64 0x64 // LINKWIDTH_UP_INTERVAL |
| 554 | #define SB_ABCFG_REG68 0x68 // LINKWIDTH_DN_INVERVAL |
| 555 | #define SB_ABCFG_REG6C 0x6C // LINKWIDTH_UPSTREAM_DWORDS |
| 556 | #define SB_ABCFG_REG70 0x70 // LINKWIDTH_DOWNSTREAM_DWORDS |
| 557 | #define SB_ABCFG_REG74 0x74 // LINKWIDTH_THRESHOLD_INCREASE |
| 558 | #define SB_ABCFG_REG78 0x78 // LINKWIDTH_THRESHOLD_DECREASE |
| 559 | |
| 560 | #define SB_ABCFG_REG80 0x80 // BL DMA PREFETCH CONTROL |
| 561 | #define SB_ABCFG_REG88 0x88 // |
| 562 | #define SB_ABCFG_REG90 0x90 // BIF CONTROL 0 |
| 563 | #define SB_ABCFG_REG94 0x94 // MSI CONTROL |
| 564 | #define SB_ABCFG_REG98 0x98 // BIF CONTROL 1 |
| 565 | #define SB_ABCFG_REG9C 0x9C // MISCCTL_9C |
| 566 | #define SB_ABCFG_REGA0 0xA0 // BIF PHY CONTROL ENABLE |
| 567 | #define SB_ABCFG_REGA4 0xA4 // BIF PHY CONTROL A4 |
| 568 | #define SB_ABCFG_REGA8 0xA8 // BIF PHY CONTROL A8 |
| 569 | #define SB_ABCFG_REGB0 0xB0 // HYPERFLASH-PCIE PORT MAPPING |
| 570 | #define SB_ABCFG_REGC0 0xC0 // PCIE_GPP_ENABLE |
| 571 | #define SB_ABCFG_REGC4 0xC4 // PCIE_P2P_INT_MAP |
| 572 | #define SB_ABCFG_REGD0 0xD0 // MCTP_VDM_TX_FIFO_DATA |
| 573 | #define SB_ABCFG_REGD4 0xD4 // MCTP_VMD_TX_CONTROL |
| 574 | #define SB_ABCFG_REGE0 0xE0 // MCTP_VDM_RX_FIFO_DATA |
| 575 | #define SB_ABCFG_REGE4 0xE4 // MCTP_VDM_RX_FIFO_STATUS |
| 576 | #define SB_ABCFG_REGEC 0xEC // MCTP_VDM_CONTROL |
| 577 | #define SB_ABCFG_REGF0 0xF0 // GPP_UPSTREAM_CONTROL |
| 578 | #define SB_ABCFG_REGFC 0xFC // SB_TRAP_CONTROL |
| 579 | #define SB_ABCFG_REG100 0x100 // SB_TRAP0_ADDRL |
| 580 | #define SB_ABCFG_REG104 0x104 // SB_TRAP0_ADDRH |
| 581 | #define SB_ABCFG_REG108 0x108 // SB_TRAP0_CMD |
| 582 | #define SB_ABCFG_REG10C 0x10C // SB_TRAP1_DATA |
| 583 | #define SB_ABCFG_REG110 0x110 // SB_TRAP1_ADDRL |
| 584 | #define SB_ABCFG_REG114 0x114 // SB_TRAP1_ADDRH |
| 585 | #define SB_ABCFG_REG118 0x118 // SB_TRAP1_CMD |
| 586 | #define SB_ABCFG_REG11C 0x11C // SB_TRAP1_DATA |
| 587 | #define SB_ABCFG_REG120 0x120 // SB_TRAP2_ADDRL |
| 588 | #define SB_ABCFG_REG124 0x124 // SB_TRAP2_ADDRH |
| 589 | #define SB_ABCFG_REG128 0x128 // SB_TRAP2_CMD |
| 590 | #define SB_ABCFG_REG12C 0x12C // SB_TRAP2_DATA |
| 591 | #define SB_ABCFG_REG130 0x130 // SB_TRAP3_ADDRL |
| 592 | #define SB_ABCFG_REG134 0x134 // SB_TRAP3_ADDRH |
| 593 | #define SB_ABCFG_REG138 0x138 // SB_TRAP3_CMD |
| 594 | #define SB_ABCFG_REG13C 0x13C // SB_TRAP3_DATA |
| 595 | #define SB_ABCFG_REG300 0x300 // MCTP_VDM_RX_SMI_CONTROL |
| 596 | #define SB_ABCFG_REG310 0x310 // BIF_GPP_STRAP_SYSTEM_0 |
| 597 | #define SB_ABCFG_REG314 0x314 // BIF_GPP_STRAP_SYSTEM_1 |
| 598 | #define SB_ABCFG_REG31C 0x31C // BIF_GPP_STRAP_LINK_CONTROL_0 |
| 599 | #define SB_ABCFG_REG320 0x320 // BIF_GPP_STRAP_LINK_CONTROL_LANE_A |
| 600 | #define SB_ABCFG_REG324 0x324 // BIF_GPP_STRAP_LINK_CONTROL_LANE_B |
| 601 | #define SB_ABCFG_REG328 0x328 // BIF_GPP_STRAP_LINK_CONTROL_LANE_C |
| 602 | #define SB_ABCFG_REG32C 0x32C // BIF_GPP_STRAP_LINK_CONTROL_LANE_D |
| 603 | #define SB_ABCFG_REG330 0x330 // BIF_GPP_STRAP_BIF_0 |
| 604 | #define SB_ABCFG_REG334 0x334 // BIF_GPP_STRAP_BIF_1 |
| 605 | #define SB_ABCFG_REG338 0x338 // BIF_GPP_STRAP_BIF_2 |
| 606 | #define SB_ABCFG_REG340 0x340 // BIF_GPP_STRAP_BIF_LANE_A |
| 607 | #define SB_ABCFG_REG344 0x344 // BIF_GPP_STRAP_BIF_LANE_B |
| 608 | #define SB_ABCFG_REG348 0x348 // BIF_GPP_STRAP_BIF_LANE_C |
| 609 | #define SB_ABCFG_REG34C 0x34C // BIF_GPP_STRAP_BIF_LANE_D |
| 610 | #define SB_ABCFG_REG350 0x350 // BIF_GPP_STRAP_PHY_LOGICAL _0 |
| 611 | #define SB_ABCFG_REG354 0x354 // BIF_GPP_STRAP_PHY_LOGICAL _1 |
| 612 | #define SB_ABCFG_REG404 0x404 // GPP0_SHADOW_COMMAND |
| 613 | #define SB_ABCFG_REG418 0x418 // GPP0_SHADOW_BUS_NUMBER |
| 614 | #define SB_ABCFG_REG41C 0x41C // GPP0_SHADOW_IO_LIMIT_BASE |
| 615 | #define SB_ABCFG_REG420 0x420 // GPP0_SHADOW_MEM_LIMIT_BASE |
| 616 | #define SB_ABCFG_REG424 0x424 // GPP0_SHADOW_PREF_MEM_LIMIT_BASE |
| 617 | #define SB_ABCFG_REG428 0x428 // GPP0_SHADOW_PREF_MEM_BASE_UPPER |
| 618 | #define SB_ABCFG_REG42C 0x42C // GPP0_SHADOW_PREF_MEM_LIMIT_UPPER |
| 619 | #define SB_ABCFG_REG430 0x430 // GPP0_SHADOW_IO_LIMIT_BASE_UPPER |
| 620 | #define SB_ABCFG_REG43C 0x43C // GPP0_SHADOW_BRIDGE_CONTROL |
| 621 | #define SB_ABCFG_REG444 0x444 // GPP1_SHADOW_COMMAND |
| 622 | #define SB_ABCFG_REG458 0x458 // GPP1_SHADOW_BUS_NUMBER |
| 623 | #define SB_ABCFG_REG45C 0x45C // GPP1_SHADOW_IO_LIMIT_BASE |
| 624 | #define SB_ABCFG_REG460 0x460 // GPP1_SHADOW_MEM_LIMIT_BASE |
| 625 | #define SB_ABCFG_REG464 0x464 // GPP1_SHADOW_PREF_MEM_LIMIT_BASE |
| 626 | #define SB_ABCFG_REG468 0x468 // GPP1_SHADOW_PREF_MEM_BASE_UPPER |
| 627 | #define SB_ABCFG_REG46C 0x46C // GPP1_SHADOW_PREF_MEM_LIMIT_UPPER |
| 628 | #define SB_ABCFG_REG470 0x470 // GPP1_SHADOW_IO_LIMIT_BASE_UPPER |
| 629 | #define SB_ABCFG_REG47C 0x47C // GPP1_SHADOW_BRIDGE_CONTROL |
| 630 | #define SB_ABCFG_REG484 0x484 // GPP2_SHADOW_COMMAND |
| 631 | #define SB_ABCFG_REG498 0x498 // GPP2_SHADOW_BUS_NUMBER |
| 632 | #define SB_ABCFG_REG49C 0x49C // GPP2_SHADOW_IO_LIMIT_BASE |
| 633 | #define SB_ABCFG_REG4A0 0x4A0 // GPP2_SHADOW_MEM_LIMIT_BASE |
| 634 | #define SB_ABCFG_REG4A4 0x4A4 // GPP2_SHADOW_PREF_MEM_LIMIT_BASE |
| 635 | #define SB_ABCFG_REG4A8 0x4A8 // GPP2_SHADOW_PREF_MEM_BASE_UPPER |
| 636 | #define SB_ABCFG_REG4AC 0x4AC // GPP2_SHADOW_PREF_MEM_LIMIT_UPPER |
| 637 | #define SB_ABCFG_REG4B0 0x4B0 // GPP2_SHADOW_IO_LIMIT_BASE_UPPER |
| 638 | #define SB_ABCFG_REG4BC 0x4BC // GPP2_SHADOW_BRIDGE_CONTROL |
| 639 | #define SB_ABCFG_REG4C4 0x4C4 // GPP3_SHADOW_COMMAND |
| 640 | #define SB_ABCFG_REG4D8 0x4D8 // GPP3_SHADOW_BUS_NUMBER |
| 641 | #define SB_ABCFG_REG4DC 0x4DC // GPP3_SHADOW_IO_LIMIT_BASE |
| 642 | #define SB_ABCFG_REG4E0 0x4E0 // GPP3_SHADOW_MEM_LIMIT_BASE |
| 643 | #define SB_ABCFG_REG4E4 0x4E4 // GPP3_SHADOW_PREF_MEM_LIMIT_BASE |
| 644 | #define SB_ABCFG_REG4E8 0x4E8 // GPP3_SHADOW_PREF_MEM_BASE_UPPER |
| 645 | #define SB_ABCFG_REG4EC 0x4EC // GPP3_SHADOW_PREF_MEM_LIMIT_UPPER |
| 646 | #define SB_ABCFG_REG4F0 0x4F0 // GPP3_SHADOW_IO_LIMIT_BASE_UPPER |
| 647 | #define SB_ABCFG_REG4FC 0x4FC // GPP3_SHADOW_BRIDGE_CONTROL |
| 648 | #define SB_ABCFG_REG10040 0x10040 // AL_EVENTCNT0LO |
| 649 | #define SB_ABCFG_REG10044 0x10044 // AL_EVENTCNT1LO |
| 650 | #define SB_ABCFG_REG10048 0x10048 // AL_EVENTCNTSEL |
| 651 | #define SB_ABCFG_REG1004A 0x1004A // AL_EVENTCNT0HI |
| 652 | #define SB_ABCFG_REG1004B 0x1004B // AL_EVENTCNT1HI |
| 653 | #define SB_ABCFG_REG1004C 0x1004C // AL_EVENTCNTCTL |
| 654 | #define SB_ABCFG_REG10050 0x10050 // MISCCTL_10050 |
| 655 | #define SB_ABCFG_REG10054 0x10054 // AL_ARB_CTL |
| 656 | #define SB_ABCFG_REG10056 0x10056 // AL_CLK_CTL |
| 657 | #define SB_ABCFG_REG10058 0x10058 // AL RAB CONTROL |
| 658 | #define SB_ABCFG_REG1005C 0x1005C // AL MLT CONTROL |
| 659 | #define SB_ABCFG_REG10060 0x10060 // AL DMA PREFETCH ENABLE |
| 660 | #define SB_ABCFG_REG10064 0x10064 // AL DMA PREFETCH FLUSH CONTROL |
| 661 | #define SB_ABCFG_REG10068 0x10068 // AL PREFETCH LIMIT |
| 662 | #define SB_ABCFG_REG1006C 0x1006C // AL DMA PREFETCH CONTROL |
| 663 | #define SB_ABCFG_REG10070 0x10070 // MISCCTL_10070 |
| 664 | #define SB_ABCFG_REG10080 0x10080 // CLKMUXSTATUS |
| 665 | #define SB_ABCFG_REG10090 0x10090 // BIF CONTROL 0 |
| 666 | #define SB_ABCFG_REG1009C 0x1009C // MISCCTL_1009C |
| 667 | |
| 668 | // |
| 669 | // RCINDX_P Registers |
| 670 | // |
| 671 | #define SB_RCINDXP_REG01 0x01 | RCINDXP << 29 // PCIEP_SCRATCH |
| 672 | #define SB_RCINDXP_REG10 0x10 | RCINDXP << 29 // |
| 673 | #define SB_RCINDXP_REG20 0x20 | RCINDXP << 29 // PCIE_TX_CNTL |
| 674 | #define SB_RCINDXP_REG50 0x50 | RCINDXP << 29 // PCIE_P_PORT_LANE_STATUS |
| 675 | #define SB_RCINDXP_REG70 0x70 | RCINDXP << 29 // PCIE_RX_CNTL |
| 676 | #define SB_RCINDXP_REGA0 0xA0 | RCINDXP << 29 // PCIE_LC_CNTL |
| 677 | #define SB_RCINDXP_REGA1 0xA1 | RCINDXP << 29 // PCIE_LC_TRAINING_CNTL |
| 678 | #define SB_RCINDXP_REGA2 0xA2 | RCINDXP << 29 // |
| 679 | #define SB_RCINDXP_REGA4 0xA4 | RCINDXP << 29 // |
| 680 | #define SB_RCINDXP_REGA5 0xA5 | RCINDXP << 29 // PCIE_LC_STATE0 |
| 681 | #define SB_RCINDXP_REGC0 0xC0 | RCINDXP << 29 // |
| 682 | |
| 683 | // |
| 684 | // RCINDX_C Registers |
| 685 | // |
| 686 | #define SB_RCINDXC_REG02 0x02 | RCINDXC << 29 // PCIE_HW_DEBUG |
| 687 | #define SB_RCINDXC_REG10 0x10 | RCINDXC << 29 // PCIE_CNTL |
| 688 | #define SB_RCINDXC_REGC1 0xC1 | RCINDXC << 29 // |
| 689 | |
| 690 | // |
| 691 | // AXINDC Registers |
| 692 | // |
| 693 | #define SB_AX_INDXC_REG02 0x02 // PCIEP_HW_DEBUG |
| 694 | #define SB_AX_INDXC_REG10 0x10 |
| 695 | #define SB_AX_INDXC_REG30 0x30 |
| 696 | #define SB_AX_DATAC_REG34 0x34 |
| 697 | #define SB_AX_INDXP_REG38 0x38 |
| 698 | #define SB_AX_DATAP_REG3C 0x3C |
| 699 | #define SB_AX_INDXC_REG40 0x40 | AXINDC << 29 |
| 700 | #define SB_AX_INDXC_REGA4 0xA4 | AXINDC << 29 |
| 701 | |
| 702 | #define SB_AX_INDXP_REGA0 0xA0 | AXINDP << 29 |
| 703 | #define SB_AX_INDXP_REGA4 0xA4 | AXINDP << 29 |
| 704 | #define SB_AX_INDXP_REGB1 0xB1 | AXINDP << 29 |
| 705 | |
| 706 | #define SB_AX_CFG_REG88 0x88 | AXCFG << 29 |
| 707 | |
| 708 | #define AX_INDXC 0 |
| 709 | #define AX_INDXP 1 |
| 710 | #define SB_AB_REG04 0x04 |
| 711 | #define SB_AB_REG40 0x40 |
| 712 | |
| 713 | #define RC_INDXC_REG40 0x40 | RCINDXC << 29 |
| 714 | #define RC_INDXC_REG65 0x65 | RCINDXC << 29 |
| 715 | |
| 716 | // |
| 717 | // SATA Device 0x4390 (IDE) |
| 718 | // 0x4391 (AHCI) |
| 719 | // 0x4392 (AHCI/RAID Promise with RAID driver) |
| 720 | // 0x4393 (RAID5) |
| 721 | // 0x4394/0x4395 (SATA HyperFlash OneNand support/SATA HyperFlash-PCIe support) |
| 722 | // Device 17 (0x11) Func 0 |
| 723 | // |
| 724 | //Sata Controller Mode |
| 725 | #define NATIVE_IDE_MODE 0 |
| 726 | #define RAID_MODE 1 |
| 727 | #define AHCI_MODE 2 |
| 728 | #define LEGACY_IDE_MODE 3 |
| 729 | #define IDE_TO_AHCI_MODE 4 |
| 730 | #define AHCI_MODE_4394 5 |
| 731 | #define IDE_TO_AHCI_MODE_4394 6 |
| 732 | |
| 733 | //Sata Port Configuration |
| 734 | #define SIX_PORTS 0 |
| 735 | #define FOUR_PORTS 1 |
| 736 | |
| 737 | #define SATA_EFUSE_LOCATION 0x10 // EFUSE bit 133 |
| 738 | #define SATA_FIS_BASE_EFUSE_LOC 0x15 // EFUSE bit 169 |
| 739 | #define SATA_EFUSE_BIT 0x20 // |
| 740 | #define SB_SATA_REG00 0x000 // Vendor ID - R- 16 bits |
| 741 | #define SB_SATA_REG02 0x002 // Device ID - RW -16 bits |
| 742 | #define SB_SATA_REG04 0x004 // PCI Command - RW - 16 bits |
| 743 | #define SB_SATA_REG06 0x006 // PCI Status - RW - 16 bits |
| 744 | #define SB_SATA_REG08 0x008 // Revision ID/PCI Class Code - R - 32 bits - Offset: 08 |
| 745 | #define SB_SATA_REG0C 0x00C // Cache Line Size - R/W - 8bits |
| 746 | #define SB_SATA_REG0D 0x00D // Latency Timer - RW - 8 bits |
| 747 | #define SB_SATA_REG0E 0x00E // Header Type - R - 8 bits |
| 748 | #define SB_SATA_REG0F 0x00F // BIST - R - 8 bits |
| 749 | #define SB_SATA_REG10 0x010 // Base Address Register 0 - RW - 32 bits |
| 750 | #define SB_SATA_REG14 0x014 // Base Address Register 1 - RW- 32 bits |
| 751 | #define SB_SATA_REG18 0x018 // Base Address Register 2 - RW - 32 bits |
| 752 | #define SB_SATA_REG1C 0x01C // Base Address Register 3 - RW - 32 bits |
| 753 | #define SB_SATA_REG20 0x020 // Base Address Register 4 - RW - 32 bits |
| 754 | #define SB_SATA_REG24 0x024 // Base Address Register 5 - RW - 32 bits |
| 755 | #define SB_SATA_REG2C 0x02C // Subsystem Vendor ID - R - 16 bits |
| 756 | #define SB_SATA_REG2D 0x02D // Subsystem ID - R - 16 bits |
| 757 | #define SB_SATA_REG30 0x030 // Expansion ROM Base Address - 32 bits |
| 758 | #define SB_SATA_REG34 0x034 // Capabilities Pointer - R - 32 bits |
| 759 | #define SB_SATA_REG3C 0x03C // Interrupt Line - RW - 8 bits |
| 760 | #define SB_SATA_REG3D 0x03D // Interrupt Pin - R - 8 bits |
| 761 | #define SB_SATA_REG3E 0x03E // Min Grant - R - 8 bits |
| 762 | #define SB_SATA_REG3F 0x03F // Max Latency - R - 8 bits |
| 763 | #define SB_SATA_REG40 0x040 // Configuration - RW - 32 bits |
| 764 | #define SB_SATA_REG44 0x044 // Software Data Register - RW - 32 bits |
| 765 | #define SB_SATA_REG48 0x048 |
| 766 | #define SB_SATA_REG50 0x050 // Message Capability - R - 16 bits |
| 767 | #define SB_SATA_REG52 0x052 // Message Control - R/W - 16 bits |
| 768 | #define SB_SATA_REG54 0x054 // Message Address - R/W - 32 bits |
| 769 | #define SB_SATA_REG58 0x058 // Message Data - R/W - 16 bits |
| 770 | #define SB_SATA_REG5C 0x05C // RAMBIST Control Register - R/W - 8 bits |
| 771 | #define SB_SATA_REG5D 0x05D // RAMBIST Status0 Register - R - 8 bits |
| 772 | #define SB_SATA_REG5E 0x05E // RAMBIST Status1 Register - R - 8 bits |
| 773 | #define SB_SATA_REG60 0x060 // Power Management Capabilities - R - 32 bits |
| 774 | #define SB_SATA_REG64 0x064 // Power Management Control + Status - RW - 32 bits |
| 775 | #define SB_SATA_REG68 0x068 // MSI Program - R/W - 8 bits |
| 776 | #define SB_SATA_REG69 0x069 // PCI Burst Timer - R/W - 8 bits |
| 777 | #define SB_SATA_REG70 0x070 // PCI Bus Master - IDE0 - RW - 32 bits |
| 778 | #define SB_SATA_REG74 0x074 // PRD Table Address - IDE0 - RW - 32 bits |
| 779 | #define SB_SATA_REG78 0x078 // PCI Bus Master - IDE1 - RW - 32 bits |
| 780 | #define SB_SATA_REG7C 0x07C // PRD Table Address - IDE1 - RW - 32 bits |
| 781 | #define SB_SATA_REG80 0x080 // Data Transfer Mode - IDE0 - RW - 32 bits |
| 782 | #define SB_SATA_REG84 0x084 // Data Transfer Mode - IDE1 - RW - 32 bits |
| 783 | #define SB_SATA_REG86 0x086 // PY Global Control |
| 784 | #define SB_SATA_REG87 0x087 |
| 785 | #define SB_SATA_REG88 0x088 // PHY Port0 Control - Port0 PY fine tune (0:23) |
| 786 | #define SB_SATA_REG8A 0x08A |
| 787 | #define SB_SATA_REG8C 0x08C // PHY Port1 Control - Port0 PY fine tune (0:23) |
| 788 | #define SB_SATA_REG8E 0x08E |
| 789 | #define SB_SATA_REG90 0x090 // PHY Port2 Control - Port0 PY fine tune (0:23) |
| 790 | #define SB_SATA_REG92 0x092 |
| 791 | #define SB_SATA_REG94 0x094 // PHY Port3 Control - Port0 PY fine tune (0:23) |
| 792 | #define SB_SATA_REG96 0x096 |
| 793 | #define SB_SATA_REG98 0x098 // EEPROM Memory Address - Command + Status - RW - 32 bits |
| 794 | #define SB_SATA_REG9C 0x09C // EEPROM Memory Data - RW - 32 bits |
| 795 | #define SB_SATA_REGA0 0x0A0 // |
| 796 | #define SB_SATA_REGA4 0x0A4 // |
| 797 | #define SB_SATA_REGA5 0x0A5 //; |
| 798 | #define SB_SATA_REGA8 0x0A8 // |
| 799 | #define SB_SATA_REGAD 0x0AD //; |
| 800 | #define SB_SATA_REGB0 0x0B0 // IDE1 Task File Configuration + Status - RW - 32 bits |
| 801 | #define SB_SATA_REGB5 0x0B5 //; |
| 802 | #define SB_SATA_REGBD 0x0BD //; |
| 803 | #define SB_SATA_REGC0 0x0C0 // BA5 Indirect Address - RW - 32 bits |
| 804 | #define SB_SATA_REGC4 0x0C4 // BA5 Indirect Access - RW - 32 bits |
| 805 | |
| 806 | #define SB_SATA_BAR5_REG00 0x000 // PCI Bus Master - IDE0 - RW - 32 bits |
| 807 | #define SB_SATA_BAR5_REG04 0x004 // PRD Table Address - IDE0 - RW - 32 bits |
| 808 | #define SB_SATA_BAR5_REG08 0x008 // PCI Bus Master - IDE1 - RW - 32 bits |
| 809 | #define SB_SATA_BAR5_REG0C 0x00C // PRD Table Address - IDE1 - RW - 32 bits |
| 810 | #define SB_SATA_BAR5_REG10 0x010 // PCI Bus Master2 - IDE0 - RW - 32 bits |
| 811 | #define SB_SATA_BAR5_REG18 0x018 // PCI Bus Master2 - IDE1 - RW - 32 bits |
| 812 | #define SB_SATA_BAR5_REG20 0x020 // PRD Address - IDE0 - RW - 32 bits |
| 813 | #define SB_SATA_BAR5_REG24 0x024 // PCI Bus Master Byte Count - IDE0- RW - 32 bits |
| 814 | #define SB_SATA_BAR5_REG28 0x028 // PRD Address - IDE1 - RW - 32 bits |
| 815 | #define SB_SATA_BAR5_REG2C 0x02C // PCI Bus Master Byte Count - IDE1 - RW - 32 bits |
| 816 | #define SB_SATA_BAR5_REG40 0x040 // FIFO Valid Byte Count and Control - IDE0 - RW - 32 bits |
| 817 | #define SB_SATA_BAR5_REG44 0x044 // FIFO Valid Byte Count and Control - IDE1 - RW - 32 bits |
| 818 | #define SB_SATA_BAR5_REG48 0x048 // System Configuration Status - Command - RW - 32 bits |
| 819 | #define SB_SATA_BAR5_REG4C 0x04C // System Software Data Register - RW - 32 bits |
| 820 | #define SB_SATA_BAR5_REG50 0x050 // FLAS Memory Address - Command + Status - RW - 32 bits |
| 821 | #define SB_SATA_BAR5_REG54 0x054 // FLAS Memory Data - RW - 32 bits |
| 822 | #define SB_SATA_BAR5_REG58 0x058 // EEPROM Memory Address - Command + Status - RW - 32 bits |
| 823 | #define SB_SATA_BAR5_REG5C 0x05C // EEPROM Memory Data - RW - 32 bits |
| 824 | #define SB_SATA_BAR5_REG60 0x060 // FIFO Port - IDE0 - RW - 32 bits |
| 825 | #define SB_SATA_BAR5_REG68 0x068 // FIFO Pointers1- IDE0 - RW - 32 bits |
| 826 | #define SB_SATA_BAR5_REG6C 0x06C // FIFO Pointers2- IDE0 - RW - 32 bits |
| 827 | #define SB_SATA_BAR5_REG70 0x070 // FIFO Port - IDE1- RW - 32 bits |
| 828 | #define SB_SATA_BAR5_REG78 0x078 // FIFO Pointers1- IDE1- RW - 32 bits |
| 829 | #define SB_SATA_BAR5_REG7C 0x07C // FIFO Pointers2- IDE1- RW - 32 bits |
| 830 | #define SB_SATA_BAR5_REG80 0x080 // IDE0 Task File Register 0- RW - 32 bits |
| 831 | #define SB_SATA_BAR5_REG84 0x084 // IDE0 Task File Register 1- RW - 32 bits |
| 832 | #define SB_SATA_BAR5_REG88 0x088 // IDE0 Task File Register 2- RW - 32 bits |
| 833 | #define SB_SATA_BAR5_REG8C 0x08C // IDE0 Read Data - RW - 32 bits |
| 834 | #define SB_SATA_BAR5_REG90 0x090 // IDE0 Task File Register 0 - Command Buffering - RW - 32 bits |
| 835 | #define SB_SATA_BAR5_REG94 0x094 // IDE0 Task File Register 1 - Command Buffering - RW - 32 bits |
| 836 | #define SB_SATA_BAR5_REG9C 0x09C // IDE0 Virtual DMA/PIO Read Byte Count - RW - 32 bits |
| 837 | #define SB_SATA_BAR5_REGA0 0x0A0 // IDE0 Task File Configuration + Status - RW - 32 bits |
| 838 | #define SB_SATA_BAR5_REGB4 0x0B4 // Data Transfer Mode -IDE0 - RW - 32 bits |
| 839 | #define SB_SATA_BAR5_REGC0 0x0C0 // IDE1 Task File Register 0 - RW - 32 bits |
| 840 | #define SB_SATA_BAR5_REGC4 0x0C4 // IDE1 Task File Register 1 - RW - 32 bits |
| 841 | #define SB_SATA_BAR5_REGC8 0x0C8 // IDE1 Task File Register 2 - RW - 32 bits |
| 842 | #define SB_SATA_BAR5_REGCC 0x0CC // Read/Write Data - RW - 32 bits |
| 843 | #define SB_SATA_BAR5_REGD0 0x0D0 // IDE1 Task File Register 0 - Command Buffering - RW - 32 bits |
| 844 | #define SB_SATA_BAR5_REGD4 0x0D4 // IDE1 Task File Register 1 - Command Buffering - RW - 32 bits |
| 845 | #define SB_SATA_BAR5_REGDC 0x0DC // IDE1 Virtual DMA/PIO Read Byte Count - RW - 32 bits |
| 846 | #define SB_SATA_BAR5_REGE0 0x0E0 // IDE1 Task File Configuration + Status - RW - 32 bits |
| 847 | #define SB_SATA_BAR5_REGF4 0x0F4 // Data Transfer Mode - IDE1 - RW - 32 bits |
| 848 | #define SB_SATA_BAR5_REGF8 0x0F8 // PORT Configuration |
| 849 | #define SB_SATA_BAR5_REGFC 0x0FC |
| 850 | #define SB_SATA_BAR5_REG100 0x0100 // Serial ATA SControl - RW - 32 bits - [Offset: 100h (channel 1) / 180 |
| 851 | #define SB_SATA_BAR5_REG104 0x0104 // Serial ATA Sstatus - RW - 32 bits - [Offset: 104h (channel 1) / 184h (cannel |
| 852 | #define SB_SATA_BAR5_REG108 0x0108 // Serial ATA Serror - RW - 32 bits - [Offset: 108h (channel 1) / 188h (cannel |
| 853 | #define SB_SATA_BAR5_REG10C 0x010C // Serial ATA Sdevice - RW - 32 bits - [Offset: 10Ch (channel 1) / 18Ch (cannel |
| 854 | #define SB_SATA_BAR5_REG144 0x0144 // Serial ATA PY Configuration - RW - 32 bits |
| 855 | #define SB_SATA_BAR5_REG148 0x0148 // SIEN - RW - 32 bits - [Offset: 148 (channel 1) / 1C8 (cannel 2)] |
| 856 | #define SB_SATA_BAR5_REG14C 0x014C // SFISCfg - RW - 32 bits - [Offset: 14C (channel 1) / 1CC (cannel 2)] |
| 857 | #define SB_SATA_BAR5_REG120 0x0120 // |
| 858 | #define SB_SATA_BAR5_REG128 0x0128 // Port Serial ATA Status |
| 859 | #define SB_SATA_BAR5_REG12C 0x012C // Port Serial ATA Control |
| 860 | #define SB_SATA_BAR5_REG130 0x0130 |
| 861 | #define SB_SATA_BAR5_REG1B0 0x01B0 |
| 862 | #define SB_SATA_BAR5_REG230 0x0230 |
| 863 | #define SB_SATA_BAR5_REG2B0 0x02B0 |
| 864 | #define SB_SATA_BAR5_REG330 0x0330 |
| 865 | #define SB_SATA_BAR5_REG3B0 0x03B0 |
| 866 | |
| 867 | // |
| 868 | // FC Device 0x439B |
| 869 | // Device 17 (0x11) Func 1 |
| 870 | // |
| 871 | #define SB_FC_REG00 0x00 // Device/Vendor ID - R |
| 872 | #define SB_FC_REG04 0x04 // Command - RW |
| 873 | #define SB_FC_REG10 0x10 // BAR |
| 874 | |
| 875 | #define SB_FC_MMIO_REG70 0x070 |
| 876 | #define SB_FC_MMIO_REG200 0x200 |
| 877 | |
| 878 | // |
| 879 | // USB OHCI Device 0x4397 |
| 880 | // Device 18 (0x11)/Device 19 (0x12)/Device 22 (0x16) Func 0 |
| 881 | // Device 20 (0x14) Func 5 (FL) |
| 882 | // |
| 883 | #define SB_OHCI_REG00 0x00 // Device/Vendor ID - R (0x43971002) |
| 884 | #define SB_OHCI_REG04 0x04 // Command - RW |
| 885 | #define SB_OHCI_REG06 0x06 // Status - R |
| 886 | #define SB_OHCI_REG08 0x08 // Revision ID/Class Code - R |
| 887 | #define SB_OHCI_REG0C 0x0C // Miscellaneous - RW |
| 888 | #define SB_OHCI_REG10 0x10 // Bar_OCI - RW |
| 889 | #define SB_OHCI_REG2C 0x2C // Subsystem Vendor ID/ Subsystem ID - RW |
| 890 | #define SB_OHCI_REG34 0x34 // Capability Pointer - R |
| 891 | #define SB_OHCI_REG3C 0x3C // Interrupt Line - RW |
| 892 | #define SB_OHCI_REG3D 0x3D // Interrupt Line - RW |
| 893 | #define SB_OHCI_REG40 0x40 // Config Timers - RW |
| 894 | #define SB_OHCI_REG42 0x42 // Port Disable Control - RW (800) |
| 895 | #define SB_OHCI_REG46 0x46 // USB PHY Battery Charger - RW (800) |
| 896 | #define SB_OHCI_REG48 0x48 // Port Force Reset - RW (800) |
| 897 | #define SB_OHCI_REG4C 0x4C // MSI - RW (800) |
| 898 | #define SB_OHCI_REG50 0x50 // Misc Control - RW |
| 899 | #define SB_OHCI_REG51 0x51 |
| 900 | #define SB_OHCI_REG52 0x52 |
| 901 | #define SB_OHCI_REG58 0x58 // Over Current Control - RW |
| 902 | #define SB_OHCI_REG5C 0x5C // Over Current Control - RW (800)?? |
| 903 | #define SB_OHCI_REG60 0x60 // Serial Bus Release Number - R (800)?? |
| 904 | #define SB_OHCI_REG68 0x68 // Over Current PME Enable - RW |
| 905 | #define SB_OHCI_REG74 0x74 // Target Timeout Control - RW (800) |
| 906 | #define SB_OHCI_REGD0 0x0D0 // MSI Control - RW |
| 907 | #define SB_OHCI_REGD4 0x0D4 // MSI Address - RW |
| 908 | #define SB_OHCI_REGD8 0x0D8 // MSI Data - RW |
| 909 | #define SB_OHCI_REGE4 0x0E4 // HT MSI Support |
| 910 | #define SB_OHCI_REGF0 0x0F0 // Function Level Reset Capability |
| 911 | #define SB_OHCI_REGF4 0x0F4 // Function Level Reset Control |
| 912 | |
| 913 | #define SB_OHCI_BAR_REG00 0x00 // cRevision - R |
| 914 | #define SB_OHCI_BAR_REG04 0x04 // cControl |
| 915 | #define SB_OHCI_BAR_REG08 0x08 // cCommandStatus |
| 916 | #define SB_OHCI_BAR_REG0C 0x0C // cInterruptStatus RW |
| 917 | #define SB_OHCI_BAR_REG10 0x10 // cInterruptEnable |
| 918 | #define SB_OHCI_BAR_REG14 0x14 // cInterruptDisable |
| 919 | #define SB_OHCI_BAR_REG18 0x18 // HcCCA |
| 920 | #define SB_OHCI_BAR_REG1C 0x1C // cPeriodCurrentED |
| 921 | #define SB_OHCI_BAR_REG20 0x20 // HcControleadED |
| 922 | #define SB_OHCI_BAR_REG24 0x24 // cControlCurrentED RW |
| 923 | #define SB_OHCI_BAR_REG28 0x28 // HcBulkeadED |
| 924 | #define SB_OHCI_BAR_REG2C 0x2C // cBulkCurrentED- RW |
| 925 | #define SB_OHCI_BAR_REG30 0x30 // HcDoneead |
| 926 | #define SB_OHCI_BAR_REG34 0x34 // cFmInterval |
| 927 | #define SB_OHCI_BAR_REG38 0x38 // cFmRemaining |
| 928 | #define SB_OHCI_BAR_REG3C 0x3C // cFmNumber |
| 929 | #define SB_OHCI_BAR_REG40 0x40 // cPeriodicStart |
| 930 | #define SB_OHCI_BAR_REG44 0x44 // HcLSThresold |
| 931 | #define SB_OHCI_BAR_REG48 0x48 // HcRDescriptorA |
| 932 | #define SB_OHCI_BAR_REG4C 0x4C // HcRDescriptorB |
| 933 | #define SB_OHCI_BAR_REG50 0x50 // HcRStatus |
| 934 | #define SB_OHCI_BAR_REG54 0x54 // HcRhPortStatus (800) |
| 935 | #define SB_OHCI_BAR_REG58 0x58 // HcRhPortStatus NPD (800) |
| 936 | #define SB_OHCI_BAR_REGF0 0xF0 // OHCI Loop Back feature Support (800) |
| 937 | |
| 938 | // |
| 939 | // USB EHCI Device 0x4396 |
| 940 | // Device 18 (0x11)/Device 19 (0x12)/Device 22 (0x16) Func 2 |
| 941 | // |
| 942 | #define SB_EHCI_REG00 0x00 // DEVICE/VENDOR ID - R |
| 943 | #define SB_EHCI_REG04 0x04 // Command - RW |
| 944 | #define SB_EHCI_REG06 0x06 // Status - R |
| 945 | #define SB_EHCI_REG08 0x08 // Revision ID/Class Code - R |
| 946 | #define SB_EHCI_REG0C 0x0C // Miscellaneous - RW |
| 947 | #define SB_EHCI_REG10 0x10 // BAR - RW |
| 948 | #define SB_EHCI_REG2C 0x2C // Subsystem ID/Subsystem Vendor ID - RW |
| 949 | #define SB_EHCI_REG34 0x34 // Capability Pointer - R |
| 950 | #define SB_EHCI_REG3C 0x3C // Interrupt Line - RW |
| 951 | #define SB_EHCI_REG3D 0x3D // Interrupt Line - RW ?? |
| 952 | #define SB_EHCI_REG40 0x40 // Config Timers - RW ?? |
| 953 | #define SB_EHCI_REG4C 0x4C // MSI - RW |
| 954 | #define SB_EHCI_REG50 0x50 // EHCI Misc Control - RW |
| 955 | #define SB_EHCI_REG54 0x54 // EHCI Misc Control - RW |
| 956 | #define SB_EHCI_REG60 0x60 // SBRN - R |
| 957 | #define SB_EHCI_REG61 0x61 // FLADJ - RW |
| 958 | #define SB_EHCI_REG62 0x62 // PORTWAKECAP - RW |
| 959 | #define SB_EHCI_REGC0 0x0C0 // PME control - RW (800) |
| 960 | #define SB_EHCI_REGC4 0x0C4 // PME Data /Status - RW (800) |
| 961 | #define SB_EHCI_REGD0 0x0D0 // MSI Control - RW |
| 962 | #define SB_EHCI_REGD4 0x0D4 // MSI Address - RW |
| 963 | #define SB_EHCI_REGD8 0x0D8 // MSI Data - RW |
| 964 | #define SB_EHCI_REGE4 0x0E4 // EHCI Debug Port Support - RW (800) |
| 965 | #define SB_EHCI_REGF0 0x0F0 // Function Level Reset Capability - R (800) |
| 966 | #define SB_EHCI_REGF4 0x0F4 // Function Level Reset Capability - R (800) |
| 967 | |
| 968 | #define SB_EHCI_BAR_REG00 0x00 // CAPLENGT - R |
| 969 | #define SB_EHCI_BAR_REG02 0x002 // CIVERSION- R |
| 970 | #define SB_EHCI_BAR_REG04 0x004 // CSPARAMS - R |
| 971 | #define SB_EHCI_BAR_REG08 0x008 // CCPARAMS - R |
| 972 | #define SB_EHCI_BAR_REG0C 0x00C // CSP-PORTROUTE - R |
| 973 | |
| 974 | #define SB_EHCI_BAR_REG20 0x020 // USBCMD - RW - 32 bits |
| 975 | #define SB_EHCI_BAR_REG24 0x024 // USBSTS - RW - 32 bits |
| 976 | #define SB_EHCI_BAR_REG28 0x028 // USBINTR -RW - 32 bits |
| 977 | #define SB_EHCI_BAR_REG2C 0x02C // FRINDEX -RW - 32 bits |
| 978 | #define SB_EHCI_BAR_REG30 0x030 // CTRLDSSEGMENT -RW - 32 bits |
| 979 | #define SB_EHCI_BAR_REG34 0x034 // PERIODICLISTBASE -RW - 32 bits |
| 980 | #define SB_EHCI_BAR_REG38 0x038 // ASYNCLISTADDR -RW - 32 bits |
| 981 | #define SB_EHCI_BAR_REG60 0x060 // CONFIGFLAG -RW - 32 bits |
| 982 | #define SB_EHCI_BAR_REG64 0x064 // PORTSC (1-N_PORTS) -RW - 32 bits |
| 983 | #define SB_EHCI_BAR_REGA0 0x0A0 // DebugPort MISC Control - RW - 32 bits (800) |
| 984 | #define SB_EHCI_BAR_REGA4 0x0A4 // Packet Buffer Threshold Values - RW - 32 bits |
| 985 | #define SB_EHCI_BAR_REGA8 0x0A8 // USB PHY Status 0 - R |
| 986 | #define SB_EHCI_BAR_REGAC 0x0AC // USB PHY Status 1 - R |
| 987 | #define SB_EHCI_BAR_REGB0 0x0B0 // USB PHY Status 2 - R |
| 988 | #define SB_EHCI_BAR_REGB4 0x0B4 // UTMI Control - RW (800) |
| 989 | #define SB_EHCI_BAR_REGB8 0x0B8 // Loopback Test |
| 990 | #define SB_EHCI_BAR_REGBC 0x0BC // EHCI MISC Control |
| 991 | #define SB_EHCI_BAR_REGC0 0x0C0 // USB PHY Calibration |
| 992 | #define SB_EHCI_BAR_REGC4 0x0C4 // USB Common PHY Control |
| 993 | #define SB_EHCI_BAR_REGC8 0x0C8 // EHCI Debug Purpose |
| 994 | #define SB_EHCI_BAR_REGCC 0x0CC // Ehci Spare 1 (800) ** |
| 995 | #define SB_EHCI_BAR_REG100 0x100 // USB debug port |
| 996 | |
| 997 | // |
| 998 | // SB800 SB CFG device 0x4385 |
| 999 | // Device 20 (0x14) Func 0 |
| 1000 | // |
| 1001 | #define SB_CFG_REG00 0x000 // VendorID - R |
| 1002 | #define SB_CFG_REG02 0x002 // DeviceID - R |
| 1003 | #define SB_CFG_REG04 0x004 // Command- RW |
| 1004 | #define SB_CFG_REG05 0x005 // Command- RW |
| 1005 | #define SB_CFG_REG06 0x006 // STATUS- RW |
| 1006 | #define SB_CFG_REG08 0x008 // Revision ID/Class Code- R |
| 1007 | #define SB_CFG_REG0A 0x00A // |
| 1008 | #define SB_CFG_REG0B 0x00B // |
| 1009 | #define SB_CFG_REG0C 0x00C // Cache Line Size- R |
| 1010 | #define SB_CFG_REG0D 0x00D // Latency Timer- R |
| 1011 | #define SB_CFG_REG0E 0x00E // Header Type- R |
| 1012 | #define SB_CFG_REG0F 0x00F // BIST- R |
| 1013 | #define SB_CFG_REG10 0x010 // Base Address 0- R |
| 1014 | #define SB_CFG_REG11 0x011 //; |
| 1015 | #define SB_CFG_REG12 0x012 //; |
| 1016 | #define SB_CFG_REG13 0x013 //; |
| 1017 | #define SB_CFG_REG14 0x014 // Base Address 1- R |
| 1018 | #define SB_CFG_REG18 0x018 // Base Address 2- R |
| 1019 | #define SB_CFG_REG1C 0x01C // Base Address 3- R |
| 1020 | #define SB_CFG_REG20 0x020 // Base Address 4- R |
| 1021 | #define SB_CFG_REG24 0x024 // Base Address 5- R |
| 1022 | #define SB_CFG_REG28 0x028 // Cardbus CIS Pointer- R |
| 1023 | #define SB_CFG_REG2C 0x02C // Subsystem Vendor ID- W |
| 1024 | #define SB_CFG_REG2E 0x02E // Subsystem ID- W |
| 1025 | #define SB_CFG_REG30 0x030 // Expansion ROM Base Address - R |
| 1026 | #define SB_CFG_REG34 0x034 // Capability Pointer - R (800) default changed as 0x00 |
| 1027 | #define SB_CFG_REG3C 0x03C // Interrupt Line - R |
| 1028 | #define SB_CFG_REG3D 0x03D // Interrupt Pin - R |
| 1029 | #define SB_CFG_REG3E 0x03E // Min_Gnt - R |
| 1030 | #define SB_CFG_REG3F 0x03F // Max_Lat - R |
| 1031 | #define SB_CFG_REG90 0x090 // Smbus Base Address - R |
| 1032 | #define SB_CFG_REG9C 0x09C // SBResourceMMIO_BASE |
| 1033 | |
| 1034 | // |
| 1035 | // SB800 SATA IDE device 0x439C |
| 1036 | // Device 20 (0x14) Func 1 |
| 1037 | // |
| 1038 | |
| 1039 | #define SB_IDE_REG00 0x00 // Vendor ID |
| 1040 | #define SB_IDE_REG02 0x02 // Device ID |
| 1041 | #define SB_IDE_REG04 0x04 // Command |
| 1042 | #define SB_IDE_REG06 0x06 // Status |
| 1043 | #define SB_IDE_REG08 0x08 // Revision ID/Class Code |
| 1044 | #define SB_IDE_REG09 0x09 // Class Code |
| 1045 | #define SB_IDE_REG2C 0x2C // Subsystem ID and Subsystem Vendor ID |
| 1046 | #define SB_IDE_REG34 0x34 |
| 1047 | #define SB_IDE_REG40 0x40 // Configuration - RW - 32 bits |
| 1048 | #define SB_IDE_REG62 0x62 // IDE Internal Control |
| 1049 | #define SB_IDE_REG63 0x63 // IDE Internal Control |
| 1050 | // |
| 1051 | // SB800 AZALIA device 0x4383 |
| 1052 | // Device 20 (0x14) Func 2 |
| 1053 | // |
| 1054 | #define ATI_AZALIA_ExtBlk_Addr 0x0F8 |
| 1055 | #define ATI_AZALIA_ExtBlk_DATA 0x0FC |
| 1056 | |
| 1057 | #define SB_AZ_REG00 0x00 // Vendor ID - R |
| 1058 | #define SB_AZ_REG02 0x02 // Device ID - R/W |
| 1059 | #define SB_AZ_REG04 0x04 // PCI Command |
| 1060 | #define SB_AZ_REG06 0x06 // PCI Status - R/W |
| 1061 | #define SB_AZ_REG08 0x08 // Revision ID |
| 1062 | #define SB_AZ_REG09 0x09 // Programming Interface |
| 1063 | #define SB_AZ_REG0A 0x0A // Sub Class Code |
| 1064 | #define SB_AZ_REG0B 0x0B // Base Class Code |
| 1065 | #define SB_AZ_REG0C 0x0C // Cache Line Size - R/W |
| 1066 | #define SB_AZ_REG0D 0x0D // Latency Timer |
| 1067 | #define SB_AZ_REG0E 0x0E // Header Type |
| 1068 | #define SB_AZ_REG0F 0x0F // BIST |
| 1069 | #define SB_AZ_REG10 0x10 // Lower Base Address Register |
| 1070 | #define SB_AZ_REG14 0x14 // Upper Base Address Register |
| 1071 | #define SB_AZ_REG2C 0x2C // Subsystem Vendor ID |
| 1072 | #define SB_AZ_REG2D 0x2D // Subsystem ID |
| 1073 | #define SB_AZ_REG34 0x34 // Capabilities Pointer |
| 1074 | #define SB_AZ_REG3C 0x3C // Interrupt Line |
| 1075 | #define SB_AZ_REG3D 0x3D // Interrupt Pin |
| 1076 | #define SB_AZ_REG3E 0x3E // Minimum Grant |
| 1077 | #define SB_AZ_REG3F 0x3F // Maximum Latency |
| 1078 | #define SB_AZ_REG40 0x40 // Misc Control 1 |
| 1079 | #define SB_AZ_REG42 0x42 // Misc Control 2 Register |
| 1080 | #define SB_AZ_REG43 0x43 // Misc Control 3 Register |
| 1081 | #define SB_AZ_REG44 0x44 // Interrupt Pin Control Register |
| 1082 | #define SB_AZ_REG46 0x46 // Debug Control Register |
| 1083 | #define SB_AZ_REG4C 0x4C |
| 1084 | #define SB_AZ_REG50 0x50 // Power Management Capability ID |
| 1085 | #define SB_AZ_REG52 0x52 // Power Management Capabilities |
| 1086 | #define SB_AZ_REG54 0x54 // Power Management Control/Status |
| 1087 | #define SB_AZ_REG60 0x60 // MSI Capability ID |
| 1088 | #define SB_AZ_REG62 0x62 // MSI Message Control |
| 1089 | #define SB_AZ_REG64 0x64 // MSI Message Lower Address |
| 1090 | #define SB_AZ_REG68 0x68 // MSI Message Upper Address |
| 1091 | #define SB_AZ_REG6C 0x6C // MSI Message Data |
| 1092 | |
| 1093 | #define SB_AZ_BAR_REG00 0x00 // Global Capabilities - R |
| 1094 | #define SB_AZ_BAR_REG02 0x02 // Minor Version - R |
| 1095 | #define SB_AZ_BAR_REG03 0x03 // Major Version - R |
| 1096 | #define SB_AZ_BAR_REG04 0x04 // Output Payload Capability - R |
| 1097 | #define SB_AZ_BAR_REG06 0x06 // Input Payload Capability - R |
| 1098 | #define SB_AZ_BAR_REG08 0x08 // Global Control - R/W |
| 1099 | #define SB_AZ_BAR_REG0C 0x0C // Wake Enable - R/W |
| 1100 | #define SB_AZ_BAR_REG0E 0x0E // State Change Status - R/W |
| 1101 | #define SB_AZ_BAR_REG10 0x10 // Global Status - R/W |
| 1102 | #define SB_AZ_BAR_REG18 0x18 // Output Stream Payload Capability - R |
| 1103 | #define SB_AZ_BAR_REG1A 0x1A // Input Stream Payload Capability - R |
| 1104 | #define SB_AZ_BAR_REG20 0x20 // Interrupt Control - R/W |
| 1105 | #define SB_AZ_BAR_REG24 0x24 // Interrupt Status - R/W |
| 1106 | #define SB_AZ_BAR_REG30 0x30 // Wall Clock Counter - R |
| 1107 | #define SB_AZ_BAR_REG38 0x38 // Stream Synchronization - R/W |
| 1108 | #define SB_AZ_BAR_REG40 0x40 // CORB Lower Base Address - R/W |
| 1109 | #define SB_AZ_BAR_REG44 0x44 // CORB Upper Base Address - RW |
| 1110 | #define SB_AZ_BAR_REG48 0x48 // CORB Write Pointer - R/W |
| 1111 | #define SB_AZ_BAR_REG4A 0x4A // CORB Read Pointer - R/W |
| 1112 | #define SB_AZ_BAR_REG4C 0x4C // CORB Control - R/W |
| 1113 | #define SB_AZ_BAR_REG4D 0x4D // CORB Status - R/W |
| 1114 | #define SB_AZ_BAR_REG4E 0x4E // CORB Size - R/W |
| 1115 | #define SB_AZ_BAR_REG50 0x50 // RIRB Lower Base Address - RW |
| 1116 | #define SB_AZ_BAR_REG54 0x54 // RIRB Upper Address - RW |
| 1117 | #define SB_AZ_BAR_REG58 0x58 // RIRB Write Pointer - RW |
| 1118 | #define SB_AZ_BAR_REG5A 0x5A // RIRB Response Interrupt Count - R/W |
| 1119 | #define SB_AZ_BAR_REG5C 0x5C // RIRB Control - R/W |
| 1120 | #define SB_AZ_BAR_REG5D 0x5D // RIRB Status - R/W |
| 1121 | #define SB_AZ_BAR_REG5E 0x5E // RIRB Size - R/W |
| 1122 | #define SB_AZ_BAR_REG60 0x60 // Immediate Command Output Interface - R/W |
| 1123 | #define SB_AZ_BAR_REG64 0x64 // Immediate Command Input Interface - R/W |
| 1124 | #define SB_AZ_BAR_REG68 0x68 // Immediate Command Input Interface - R/W |
| 1125 | #define SB_AZ_BAR_REG70 0x70 // DMA Position Lower Base Address - R/W |
| 1126 | #define SB_AZ_BAR_REG74 0x74 // DMA Position Upper Base Address - R/W |
| 1127 | #define SB_AZ_BAR_REG2030 0x2030 // Wall Clock Counter Alias - R |
| 1128 | |
| 1129 | // |
| 1130 | // SB800 LPC Device 0x439D |
| 1131 | // Device 20 (0x14) Func 3 |
| 1132 | // |
| 1133 | #define SB_LPC_REG00 0x00 // VID- R |
| 1134 | #define SB_LPC_REG02 0x02 // DID- R |
| 1135 | #define SB_LPC_REG04 0x04 // CMD- RW |
| 1136 | #define SB_LPC_REG06 0x06 // STATUS- RW |
| 1137 | #define SB_LPC_REG08 0x08 // Revision ID/Class Code - R |
| 1138 | #define SB_LPC_REG0C 0x0C // Cache Line Size - R |
| 1139 | #define SB_LPC_REG0D 0x0D // Latency Timer - R |
| 1140 | #define SB_LPC_REG0E 0x0E // Header Type - R |
| 1141 | #define SB_LPC_REG0F 0x0F // BIST- R |
| 1142 | #define SB_LPC_REG10 0x10 // Base Address Reg 0- RW* |
| 1143 | #define SB_LPC_REG2C 0x2C // Subsystem ID & Subsystem Vendor ID - Wo/Ro |
| 1144 | #define SB_LPC_REG34 0x34 // Capabilities Pointer - Ro |
| 1145 | #define SB_LPC_REG40 0x40 // PCI Control - RW |
| 1146 | #define SB_LPC_REG44 0x44 // IO Port Decode Enable Register 1- RW |
| 1147 | #define SB_LPC_REG45 0x45 // IO Port Decode Enable Register 2- RW |
| 1148 | #define SB_LPC_REG46 0x46 // IO Port Decode Enable Register 3- RW |
| 1149 | #define SB_LPC_REG47 0x47 // IO Port Decode Enable Register 4- RW |
| 1150 | #define SB_LPC_REG48 0x48 // IO/Mem Port Decode Enable Register 5- RW |
| 1151 | #define SB_LPC_REG49 0x49 // LPC Sync Timeout Count - RW |
| 1152 | #define SB_LPC_REG4A 0x4A // IO/Mem Port Decode Enable Register 6- RW |
| 1153 | #define SB_LPC_REG4C 0x4C // Memory Range Register - RW |
| 1154 | #define SB_LPC_REG50 0x50 // Rom Protect 0 - RW |
| 1155 | #define SB_LPC_REG54 0x54 // Rom Protect 1 - RW |
| 1156 | #define SB_LPC_REG58 0x58 // Rom Protect 2 - RW |
| 1157 | #define SB_LPC_REG5C 0x5C // Rom Protect 3 - RW |
| 1158 | #define SB_LPC_REG60 0x60 // PCI Memory Start Address of LPC Target Cycles - |
| 1159 | #define SB_LPC_REG62 0x62 // PCI Memory End Address of LPC Target Cycles - |
| 1160 | #define SB_LPC_REG64 0x64 // PCI IO base Address of Wide Generic Port - RW |
| 1161 | #define SB_LPC_REG65 0x65 |
| 1162 | #define SB_LPC_REG66 0x66 |
| 1163 | #define SB_LPC_REG67 0x67 |
| 1164 | #define SB_LPC_REG68 0x68 // LPC ROM Address Range 1 (Start Address) - RW |
| 1165 | #define SB_LPC_REG69 0x69 |
| 1166 | #define SB_LPC_REG6A 0x6A // LPC ROM Address Range 1 (End Address) - RW |
| 1167 | #define SB_LPC_REG6B 0x6B |
| 1168 | #define SB_LPC_REG6C 0x6C // LPC ROM Address Range 2 (Start Address)- RW |
| 1169 | #define SB_LPC_REG6D 0x6D |
| 1170 | #define SB_LPC_REG6E 0x6E // LPC ROM Address Range 2 (End Address) - RW |
| 1171 | #define SB_LPC_REG6F 0x6F |
| 1172 | #define SB_LPC_REG70 0x70 // Firmware ub Select - RW* |
| 1173 | #define SB_LPC_REG71 0x71 |
| 1174 | #define SB_LPC_REG72 0x72 |
| 1175 | #define SB_LPC_REG73 0x73 |
| 1176 | #define SB_LPC_REG74 0x74 // Alternative Wide IO Range Enable- W/R |
| 1177 | #define SB_LPC_REG78 0x78 // Miscellaneous Control Bits- W/R |
| 1178 | #define SB_LPC_REG7C 0x7C // TPM (trusted plant form module) reg- W/R |
| 1179 | #define SB_LPC_REG9C 0x9C |
| 1180 | #define SB_LPC_REG80 0x80 // MSI Capability Register- R |
| 1181 | #define SB_LPC_REGA0 0x0A0 // SPI base address |
| 1182 | #define SB_LPC_REGA1 0x0A1 // SPI base address |
| 1183 | #define SB_LPC_REGA2 0x0A2 // SPI base address |
| 1184 | #define SB_LPC_REGA3 0x0A3 // SPI base address |
| 1185 | #define SB_LPC_REGA4 0x0A4 |
| 1186 | #define SB_LPC_REGBA 0x0BA // EcControl |
| 1187 | #define SB_LPC_REGBB 0x0BB // HostControl |
| 1188 | |
| 1189 | // |
| 1190 | // SB800 PCIB 0x4384 |
| 1191 | // Device 20 (0x14) Func 4 |
| 1192 | // |
| 1193 | #define SB_PCIB_REG04 0x04 // Command |
| 1194 | #define SB_PCIB_REG0D 0x0D // Primary Master Latency Timer |
| 1195 | #define SB_PCIB_REG1B 0x1B // Secondary Latency Timer |
| 1196 | #define SB_PCIB_REG1C 0x1C // IO Base |
| 1197 | #define SB_PCIB_REG1D 0x1D // IO Limit |
| 1198 | #define SB_PCIB_REG40 0x40 // CPCTRL |
| 1199 | #define SB_PCIB_REG42 0x42 // CLKCTRL |
| 1200 | #define SB_PCIB_REG48 0x48 // |
| 1201 | #define SB_PCIB_REG4A 0x4A // PCICLK Enable Bits |
| 1202 | #define SB_PCIB_REG4B 0x4B // Misc Control |
| 1203 | #define SB_PCIB_REG4C 0x4C // AutoClockRun Control |
| 1204 | #define SB_PCIB_REG50 0x50 // Dual Address Cycle Enable and PCIB_CLK_Stop Override |
| 1205 | #define SB_PCIB_REG65 0x65 // Misc Control |
| 1206 | #define SB_PCIB_REG66 0x66 // Misc Control |
| 1207 | // |
| 1208 | // SB800 NIC 0x4384 |
| 1209 | // Device 20 (0x14) Func 6 (Func5 OHCI FL device) |
| 1210 | // |
| 1211 | #define SB_GEC_REG04 0x04 // Command |
| 1212 | #define SB_GEC_REG10 0x10 // GEC BAR |
| 1213 | |
| 1214 | // |
| 1215 | // SB800 SB MMIO Base (SMI) |
| 1216 | // offset : 0x200 |
| 1217 | // |
| 1218 | #define SB_SMI_REG00 0x00 // EventStatus |
| 1219 | #define SB_SMI_REG04 0x04 // EventEnable |
| 1220 | #define SB_SMI_REG08 0x08 // SciTrig |
| 1221 | #define SB_SMI_REG0C 0x0C // SciLevl |
| 1222 | #define SB_SMI_REG10 0x10 // SmiSciStatus |
| 1223 | #define SB_SMI_REG14 0x14 // SmiSciEn |
| 1224 | #define SB_SMI_REG18 0x18 // ForceSciEn |
| 1225 | #define SB_SMI_REG1C 0x1C // SciRwData |
| 1226 | #define SB_SMI_REG20 0x20 // SciS0En |
| 1227 | #define SB_SMI_Gevent0 0x40 // SciMap0 |
| 1228 | #define SB_SMI_Gevent1 0x41 // SciMap1 |
| 1229 | #define SB_SMI_Gevent2 0x42 // SciMap2 |
| 1230 | #define SB_SMI_Gevent3 0x43 // SciMap3 |
| 1231 | #define SB_SMI_Gevent4 0x44 // SciMap4 |
| 1232 | #define SB_SMI_Gevent5 0x45 // SciMap5 |
| 1233 | #define SB_SMI_Gevent6 0x46 // SciMap6 |
| 1234 | #define SB_SMI_Gevent7 0x47 // SciMap7 |
| 1235 | #define SB_SMI_Gevent8 0x48 // SciMap8 |
| 1236 | #define SB_SMI_Gevent9 0x49 // SciMap9 |
| 1237 | #define SB_SMI_Gevent10 0x4A // SciMap10 |
| 1238 | #define SB_SMI_Gevent11 0x4B // SciMap11 |
| 1239 | #define SB_SMI_Gevent12 0x4C // SciMap12 |
| 1240 | #define SB_SMI_Gevent13 0x4D // SciMap13 |
| 1241 | #define SB_SMI_Gevent14 0x4E // SciMap14 |
| 1242 | #define SB_SMI_Gevent15 0x4F // SciMap15 |
| 1243 | #define SB_SMI_Gevent16 0x50 // SciMap16 |
| 1244 | #define SB_SMI_Gevent17 0x51 // SciMap17 |
| 1245 | #define SB_SMI_Gevent18 0x52 // SciMap18 |
| 1246 | #define SB_SMI_Gevent19 0x53 // SciMap19 |
| 1247 | #define SB_SMI_Gevent20 0x54 // SciMap20 |
| 1248 | #define SB_SMI_Gevent21 0x55 // SciMap21 |
| 1249 | #define SB_SMI_Gevent22 0x56 // SciMap22 |
| 1250 | #define SB_SMI_Gevent23 0x57 // SciMap23 |
| 1251 | #define SB_SMI_Usbwakup0 0x58 // SciMap24 |
| 1252 | #define SB_SMI_Usbwakup1 0x59 // SciMap25 |
| 1253 | #define SB_SMI_Usbwakup2 0x5A // SciMap26 |
| 1254 | #define SB_SMI_Usbwakup3 0x5B // SciMap27 |
| 1255 | #define SB_SMI_SBGppPme0 0x5C // SciMap28 |
| 1256 | #define SB_SMI_SBGppPme1 0x5D // SciMap29 |
| 1257 | #define SB_SMI_SBGppPme2 0x5E // SciMap30 |
| 1258 | #define SB_SMI_SBGppPme3 0x5F // SciMap31 |
| 1259 | #define SB_SMI_SBGppHp0 0x60 // SciMap32 |
| 1260 | #define SB_SMI_SBGppHp1 0x61 // SciMap33 |
| 1261 | #define SB_SMI_SBGppHp2 0x62 // SciMap34 |
| 1262 | #define SB_SMI_SBGppHp3 0x63 // SciMap35 |
| 1263 | #define SB_SMI_AzaliaPme 0x64 // SciMap36 |
| 1264 | #define SB_SMI_SataGevent0 0x65 // SciMap37 |
| 1265 | #define SB_SMI_SataGevent1 0x66 // SciMap38 |
| 1266 | #define SB_SMI_GecPme 0x67 // SciMap39 |
| 1267 | #define SB_SMI_IMCGevent0 0x68 // SciMap40 |
| 1268 | #define SB_SMI_IMCGevent1 0x69 // SciMap41 |
| 1269 | #define SB_SMI_CIRPme 0x6A // SciMap42 |
| 1270 | #define SB_SMI_WakePinGevent 0x6B // SciMap43 |
| 1271 | #define SB_SMI_FanThGevent 0x6C // SciMap44 //FanThermalGevent |
| 1272 | #define SB_SMI_ASFMasterIntr 0x6D // SciMap45 |
| 1273 | #define SB_SMI_ASFSlaveIntr 0x6E // SciMap46 |
| 1274 | #define SB_SMI_SMBUS0 0x6F // SciMap47 |
| 1275 | #define SB_SMI_TWARN 0x70 // SciMap48 |
| 1276 | #define SB_SMI_TMI 0x71 // SciMap49 // TrafficMonitorIntr |
| 1277 | |
| 1278 | // Empty from 0x72-0x7F |
| 1279 | //#Define SB_SMI_REG7C 0x7F // SciMap63 *** |
| 1280 | |
| 1281 | #define SB_SMI_REG80 0x80 // SmiStatus0 |
| 1282 | #define SB_SMI_REG84 0x84 // SmiStatus1 |
| 1283 | #define SB_SMI_REG88 0x88 // SmiStatus2 |
| 1284 | #define SB_SMI_REG8C 0x8C // SmiStatus3 |
| 1285 | #define SB_SMI_REG90 0x90 // SmiStatus4 |
| 1286 | #define SB_SMI_REG94 0x94 // SmiPointer |
| 1287 | #define SB_SMI_REG96 0x96 // SmiTimer |
| 1288 | #define SB_SMI_REG98 0x98 // SmiTrig |
| 1289 | #define SB_SMI_REG9C 0x9C // SmiTrig |
| 1290 | #define SB_SMI_REGA0 0xA0 |
| 1291 | #define SB_SMI_REGA1 0xA1 |
| 1292 | #define SB_SMI_REGA2 0xA2 |
| 1293 | #define SB_SMI_REGA3 0xA3 |
| 1294 | #define SB_SMI_REGA4 0xA4 |
| 1295 | #define SB_SMI_REGA5 0xA5 |
| 1296 | #define SB_SMI_REGA6 0xA6 |
| 1297 | #define SB_SMI_REGA7 0xA7 |
| 1298 | #define SB_SMI_REGA8 0xA8 |
| 1299 | #define SB_SMI_REGA9 0xA9 |
| 1300 | #define SB_SMI_REGAA 0xAA |
| 1301 | #define SB_SMI_REGAB 0xAB |
| 1302 | #define SB_SMI_REGAC 0xAC |
| 1303 | #define SB_SMI_REGAD 0xAD |
| 1304 | #define SB_SMI_REGAE 0xAE |
| 1305 | #define SB_SMI_REGAF 0xAF |
| 1306 | #define SB_SMI_REGB0 0xB0 |
| 1307 | #define SB_SMI_REGB1 0xB1 |
| 1308 | #define SB_SMI_REGB2 0xB2 |
| 1309 | #define SB_SMI_REGB3 0xB3 |
| 1310 | #define SB_SMI_REGB4 0xB4 |
| 1311 | #define SB_SMI_REGB5 0xB5 |
| 1312 | #define SB_SMI_REGB6 0xB6 |
| 1313 | #define SB_SMI_REGB7 0xB7 |
| 1314 | #define SB_SMI_REGB8 0xB8 |
| 1315 | #define SB_SMI_REGB9 0xB9 |
| 1316 | #define SB_SMI_REGBA 0xBA |
| 1317 | #define SB_SMI_REGBB 0xBB |
| 1318 | #define SB_SMI_REGBC 0xBC |
| 1319 | #define SB_SMI_REGBD 0xBD |
| 1320 | #define SB_SMI_REGBE 0xBE |
| 1321 | #define SB_SMI_REGBF 0xBF |
| 1322 | #define SB_SMI_REGC0 0xC0 |
| 1323 | #define SB_SMI_REGC1 0xC1 |
| 1324 | #define SB_SMI_REGC2 0xC2 |
| 1325 | #define SB_SMI_REGC3 0xC3 |
| 1326 | #define SB_SMI_REGC4 0xC4 |
| 1327 | #define SB_SMI_REGC5 0xC5 |
| 1328 | #define SB_SMI_REGC6 0xC6 |
| 1329 | #define SB_SMI_REGC7 0xC7 |
| 1330 | #define SB_SMI_REGC8 0xC8 |
| 1331 | #define SB_SMI_REGCA 0xCA // IoTrapping1 |
| 1332 | #define SB_SMI_REGCC 0xCC // IoTrapping2 |
| 1333 | #define SB_SMI_REGCE 0xCE // IoTrapping3 |
| 1334 | #define SB_SMI_REGD0 0xD0 // MemTrapping0 |
| 1335 | #define SB_SMI_REGD4 0xD4 // MemRdOvrData0 |
| 1336 | #define SB_SMI_REGD8 0xD8 // MemTrapping1 |
| 1337 | #define SB_SMI_REGDC 0xDC // MemRdOvrData1 |
| 1338 | #define SB_SMI_REGE0 0xE0 // MemTrapping2 |
| 1339 | #define SB_SMI_REGE4 0xE4 // MemRdOvrData2 |
| 1340 | #define SB_SMI_REGE8 0xE8 // MemTrapping3 |
| 1341 | #define SB_SMI_REGEC 0xEC // MemRdOvrData3 |
| 1342 | #define SB_SMI_REGF0 0xF0 // CfgTrapping0 |
| 1343 | #define SB_SMI_REGF4 0xF4 // CfgTrapping1 |
| 1344 | #define SB_SMI_REGF8 0xF8 // CfgTrapping2 |
| 1345 | #define SB_SMI_REGFC 0xFC // CfgTrapping3 |
| 1346 | |
| 1347 | // |
| 1348 | // SB800 SB MMIO Base (PMIO) |
| 1349 | // offset : 0x300 |
| 1350 | // |
| 1351 | #define SB_PMIOA_REG00 0x00 // ISA Decode |
| 1352 | #define SB_PMIOA_REG04 0x04 // ISA Control |
| 1353 | #define SB_PMIOA_REG08 0x08 // PCI Control |
| 1354 | #define SB_PMIOA_REG0C 0x0C // StpClkSmaf |
| 1355 | #define SB_PMIOA_REG10 0x10 // RetryDetect |
| 1356 | #define SB_PMIOA_REG14 0x14 // StuckDetect |
| 1357 | #define SB_PMIOA_REG20 0x20 // BiosRamEn |
| 1358 | #define SB_PMIOA_REG24 0x24 // AcpiMmioEn |
| 1359 | #define SB_PMIOA_REG28 0x28 // AsfEn |
| 1360 | #define SB_PMIOA_REG2C 0x2C // Smbus0En |
| 1361 | #define SB_PMIOA_REG34 0x34 // IoApicEn |
| 1362 | #define SB_PMIOA_REG3C 0x3C // SmartVoltEn |
| 1363 | #define SB_PMIOA_REG40 0x40 // SmartVolt2En |
| 1364 | #define SB_PMIOA_REG44 0x44 // BootTimerEn |
| 1365 | #define SB_PMIOA_REG48 0x48 // WatchDogTimerEn |
| 1366 | #define SB_PMIOA_REG4C 0x4C // WatchDogTimerConfig |
| 1367 | #define SB_PMIOA_REG50 0x50 // HPETEn |
| 1368 | #define SB_PMIOA_REG54 0x54 // SerialIrqConfig |
| 1369 | #define SB_PMIOA_REG56 0x56 // RtcControl |
| 1370 | #define SB_PMIOA_REG58 0x58 // VRT_T1 |
| 1371 | #define SB_PMIOA_REG59 0x59 // VRT_T2 |
| 1372 | #define SB_PMIOA_REG5A 0x5A // IntruderControl |
| 1373 | #define SB_PMIOA_REG5B 0x5B // RtcShadow |
| 1374 | #define SB_PMIOA_REG5C 0x5C |
| 1375 | #define SB_PMIOA_REG5D 0x5D |
| 1376 | #define SB_PMIOA_REG5E 0x5E // RtcExtIndex |
| 1377 | #define SB_PMIOA_REG5F 0x5F // RtcExtData |
| 1378 | #define SB_PMIOA_REG60 0x60 // AcpiPm1EvtBlk |
| 1379 | #define SB_PMIOA_REG62 0x62 // AcpiPm1CntBlk |
| 1380 | #define SB_PMIOA_REG64 0x64 // AcpiPmTmrBlk |
| 1381 | #define SB_PMIOA_REG66 0x66 // P_CNTBlk |
| 1382 | #define SB_PMIOA_REG68 0x68 // AcpiGpe0Blk |
| 1383 | #define SB_PMIOA_REG6A 0x6A // AcpiSmiCmd |
| 1384 | #define SB_PMIOA_REG6C 0x6C // AcpiPm2CntBlk |
| 1385 | #define SB_PMIOA_REG6E 0x6E // AcpiPmaCntBlk |
| 1386 | #define SB_PMIOA_REG74 0x74 // AcpiConfig |
| 1387 | #define SB_PMIOA_REG78 0x78 // WakeIoAddr |
| 1388 | #define SB_PMIOA_REG7A 0x7A // HaltCountEn |
| 1389 | #define SB_PMIOA_REG7C 0x7C // C1eWrPortAdr |
| 1390 | #define SB_PMIOA_REG7E 0x7E // CStateEn |
| 1391 | #define SB_PMIOA_REG80 0x80 // BreakEvent |
| 1392 | #define SB_PMIOA_REG84 0x84 // AutoArbEn |
| 1393 | #define SB_PMIOA_REG88 0x88 // CStateControl |
| 1394 | #define SB_PMIOA_REG8C 0x8C // StpClkHoldTime |
| 1395 | #define SB_PMIOA_REG8E 0x8E // PopUpEndTime |
| 1396 | #define SB_PMIOA_REG90 0x90 // C4Control |
| 1397 | #define SB_PMIOA_REG94 0x94 // CStateTiming0 |
| 1398 | #define SB_PMIOA_REG98 0x98 // CStateTiming1 |
| 1399 | #define SB_PMIOA_REG9C 0x9C // C2Count |
| 1400 | #define SB_PMIOA_REG9D 0x9D // C3Count |
| 1401 | #define SB_PMIOA_REG9E 0x9E // C4Count |
| 1402 | #define SB_PMIOA_REGA0 0xA0 // MessageCState |
| 1403 | #define SB_PMIOA_REGA4 0xA4 // |
| 1404 | #define SB_PMIOA_REGA8 0xA8 // TrafficMonitorIdleTime |
| 1405 | #define SB_PMIOA_REGAA 0xAA // TrafficMonitorIntTime |
| 1406 | #define SB_PMIOA_REGAC 0xAC // TrafficMonitorTrafficCount |
| 1407 | #define SB_PMIOA_REGAE 0xAE // TrafficMonitorIntrCount |
| 1408 | #define SB_PMIOA_REGB0 0xB0 // TrafficMonitorTimeTick |
| 1409 | #define SB_PMIOA_REGB4 0xB4 // FidVidControl |
| 1410 | #define SB_PMIOA_REGB6 0xB6 // TPRESET1 |
| 1411 | #define SB_PMIOA_REGB7 0xB7 // Tpreset1b |
| 1412 | #define SB_PMIOA_REGB8 0xB8 // TPRESET2 |
| 1413 | #define SB_PMIOA_REGB9 0xB9 // Test0 |
| 1414 | #define SB_PMIOA_REGBA 0xBA // S_StateControl |
| 1415 | #define SB_PMIOA_REGBC 0xBC // ThrottlingControl |
| 1416 | #define SB_PMIOA_REGBE 0xBE // ResetControl |
| 1417 | #define SB_PMIOA_REGBF 0xBF // ResetControl |
| 1418 | #define SB_PMIOA_REGC0 0xC0 // S5Status |
| 1419 | #define SB_PMIOA_REGC2 0xC2 // ResetStatus |
| 1420 | #define SB_PMIOA_REGC4 0xC4 // ResetCommand |
| 1421 | #define SB_PMIOA_REGC5 0xC5 // CF9Shadow |
| 1422 | #define SB_PMIOA_REGC6 0xC6 // HTControl |
| 1423 | #define SB_PMIOA_REGC8 0xC8 // Misc |
| 1424 | #define SB_PMIOA_REGCC 0xCC // IoDrvSth |
| 1425 | #define SB_PMIOA_REGD0 0xD0 // CLKRunEn |
| 1426 | #define SB_PMIOA_REGD2 0xD2 // PmioDebug |
| 1427 | #define SB_PMIOA_REGD6 0xD6 // IMCGating |
| 1428 | #define SB_PMIOA_REGD8 0xD8 // MiscIndex |
| 1429 | #define SB_PMIOA_REGD9 0xD9 // MiscData |
| 1430 | #define SB_PMIOA_REGDA 0xDA // SataConfig |
| 1431 | #define SB_PMIOA_REGDC 0xDC // HyperFlashConfig |
| 1432 | #define SB_PMIOA_REGDE 0xDE // ABConfig |
| 1433 | #define SB_PMIOA_REGE0 0xE0 // ABRegBar |
| 1434 | #define SB_PMIOA_REGE6 0xE6 // FcEn |
| 1435 | #define SB_PMIOA_REGEA 0xEA // PcibConfig |
| 1436 | #define SB_PMIOA_REGEB 0xEB // AzEn |
| 1437 | #define SB_PMIOA_REGEC 0xEC // LpcGating |
| 1438 | #define SB_PMIOA_REGED 0xED // UsbGating |
| 1439 | #define SB_PMIOA_REGEF 0xEF // UsbEnable |
| 1440 | #define SB_PMIOA_REGF0 0xF0 // UsbControl |
| 1441 | #define SB_PMIOA_REGF3 0xF3 // UsbDebug |
| 1442 | #define SB_PMIOA_REGF6 0xF6 // GecEn |
| 1443 | #define SB_PMIOA_REGF8 0xF8 // GecConfig |
| 1444 | #define SB_PMIOA_REGFC 0xFC // TraceMemoryEn |
| 1445 | |
| 1446 | // |
| 1447 | // SB800 SB MMIO Base (PMIO2) |
| 1448 | // offset : 0x400 |
| 1449 | // |
| 1450 | #define SB_PMIO2_REG00 0x00 // Fan0InputControl |
| 1451 | #define SB_PMIO2_REG01 0x01 // Fan0Control |
| 1452 | #define SB_PMIO2_REG02 0x02 // Fan0Freq |
| 1453 | #define SB_PMIO2_REG03 0x03 // LowDuty0 |
| 1454 | #define SB_PMIO2_REG04 0x04 // MidDuty0 |
| 1455 | |
| 1456 | #define SB_PMIO2_REG10 0x00 // Fan1InputControl |
| 1457 | #define SB_PMIO2_REG11 0x01 // Fan1Control |
| 1458 | #define SB_PMIO2_REG12 0x02 // Fan1Freq |
| 1459 | #define SB_PMIO2_REG13 0x03 // LowDuty1 |
| 1460 | #define SB_PMIO2_REG14 0x04 // MidDuty1 |
| 1461 | |
| 1462 | #define SB_PMIO2_REG 0xFC // TraceMemoryEn |
| 1463 | |
| 1464 | |
| 1465 | // |
| 1466 | // SB800 SB MMIO Base (GPIO/IoMux) |
| 1467 | // offset : 0x100/0xD00 |
| 1468 | // |
| 1469 | /* |
| 1470 | GPIO from 0 ~ 67, (GEVENT 0-23) 128 ~ 150, 160 ~ 226. |
| 1471 | */ |
| 1472 | #define SB_GPIO_REG00 0x00 |
| 1473 | #define SB_GPIO_REG32 0x20 |
| 1474 | #define SB_GPIO_REG33 0x21 |
| 1475 | #define SB_GPIO_REG34 0x22 |
| 1476 | #define SB_GPIO_REG35 0x23 |
| 1477 | #define SB_GPIO_REG36 0x24 |
| 1478 | #define SB_GPIO_REG37 0x25 |
| 1479 | #define SB_GPIO_REG38 0x26 |
| 1480 | #define SB_GPIO_REG39 0x27 |
| 1481 | #define SB_GPIO_REG40 0x28 |
| 1482 | #define SB_GPIO_REG41 0x29 |
| 1483 | #define SB_GPIO_REG42 0x2A |
| 1484 | #define SB_GPIO_REG43 0x2B |
| 1485 | #define SB_GPIO_REG44 0x2C |
| 1486 | #define SB_GPIO_REG45 0x2D |
| 1487 | #define SB_GPIO_REG46 0x2E |
| 1488 | #define SB_GPIO_REG47 0x2F |
| 1489 | #define SB_GPIO_REG48 0x30 |
| 1490 | #define SB_GPIO_REG49 0x31 |
| 1491 | #define SB_GPIO_REG50 0x32 |
| 1492 | #define SB_GPIO_REG51 0x33 |
| 1493 | #define SB_GPIO_REG52 0x34 |
| 1494 | #define SB_GPIO_REG53 0x35 |
| 1495 | #define SB_GPIO_REG54 0x36 |
| 1496 | #define SB_GPIO_REG55 0x37 |
| 1497 | #define SB_GPIO_REG56 0x38 |
| 1498 | #define SB_GPIO_REG57 0x39 |
| 1499 | #define SB_GPIO_REG58 0x3A |
| 1500 | #define SB_GPIO_REG59 0x3B |
| 1501 | #define SB_GPIO_REG60 0x3C |
| 1502 | #define SB_GPIO_REG61 0x3D |
| 1503 | #define SB_GPIO_REG62 0x3E |
| 1504 | #define SB_GPIO_REG63 0x3F |
| 1505 | #define SB_GPIO_REG64 0x40 |
| 1506 | #define SB_GPIO_REG65 0x41 |
| 1507 | #define SB_GPIO_REG66 0x42 |
| 1508 | #define SB_GPIO_REG67 0x43 |
| 1509 | |
| 1510 | #define SB_GEVENT_REG00 0x60 |
| 1511 | #define SB_GEVENT_REG01 0x61 |
| 1512 | #define SB_GEVENT_REG02 0x62 |
| 1513 | #define SB_GEVENT_REG03 0x63 |
| 1514 | #define SB_GEVENT_REG04 0x64 |
| 1515 | #define SB_GEVENT_REG05 0x65 |
| 1516 | #define SB_GEVENT_REG06 0x66 |
| 1517 | #define SB_GEVENT_REG07 0x67 |
| 1518 | #define SB_GEVENT_REG08 0x68 |
| 1519 | #define SB_GEVENT_REG09 0x69 |
| 1520 | #define SB_GEVENT_REG10 0x6A |
| 1521 | #define SB_GEVENT_REG11 0x6B |
| 1522 | #define SB_GEVENT_REG12 0x6C |
| 1523 | #define SB_GEVENT_REG13 0x6D |
| 1524 | #define SB_GEVENT_REG14 0x6E |
| 1525 | #define SB_GEVENT_REG15 0x6F |
| 1526 | #define SB_GEVENT_REG16 0x70 |
| 1527 | #define SB_GEVENT_REG17 0x71 |
| 1528 | #define SB_GEVENT_REG18 0x72 |
| 1529 | #define SB_GEVENT_REG19 0x73 |
| 1530 | #define SB_GEVENT_REG20 0x74 |
| 1531 | #define SB_GEVENT_REG21 0x75 |
| 1532 | #define SB_GEVENT_REG22 0x76 |
| 1533 | #define SB_GEVENT_REG23 0x77 |
| 1534 | // S5-DOMAIN GPIO |
| 1535 | #define SB_GPIO_REG160 0xA0 |
| 1536 | #define SB_GPIO_REG161 0xA1 |
| 1537 | #define SB_GPIO_REG162 0xA2 |
| 1538 | #define SB_GPIO_REG163 0xA3 |
| 1539 | #define SB_GPIO_REG164 0xA4 |
| 1540 | #define SB_GPIO_REG165 0xA5 |
| 1541 | #define SB_GPIO_REG166 0xA6 |
| 1542 | #define SB_GPIO_REG167 0xA7 |
| 1543 | #define SB_GPIO_REG168 0xA8 |
| 1544 | #define SB_GPIO_REG169 0xA9 |
| 1545 | #define SB_GPIO_REG170 0xAA |
| 1546 | #define SB_GPIO_REG171 0xAB |
| 1547 | #define SB_GPIO_REG172 0xAC |
| 1548 | #define SB_GPIO_REG173 0xAD |
| 1549 | #define SB_GPIO_REG174 0xAE |
| 1550 | #define SB_GPIO_REG175 0xAF |
| 1551 | #define SB_GPIO_REG176 0xB0 |
| 1552 | #define SB_GPIO_REG177 0xB1 |
| 1553 | #define SB_GPIO_REG178 0xB2 |
| 1554 | #define SB_GPIO_REG179 0xB3 |
| 1555 | #define SB_GPIO_REG180 0xB4 |
| 1556 | #define SB_GPIO_REG181 0xB5 |
| 1557 | #define SB_GPIO_REG182 0xB6 |
| 1558 | #define SB_GPIO_REG183 0xB7 |
| 1559 | #define SB_GPIO_REG184 0xB8 |
| 1560 | #define SB_GPIO_REG185 0xB9 |
| 1561 | #define SB_GPIO_REG186 0xBA |
| 1562 | #define SB_GPIO_REG187 0xBB |
| 1563 | #define SB_GPIO_REG188 0xBC |
| 1564 | #define SB_GPIO_REG189 0xBD |
| 1565 | #define SB_GPIO_REG190 0xBE |
| 1566 | #define SB_GPIO_REG191 0xBF |
| 1567 | #define SB_GPIO_REG192 0xC0 |
| 1568 | #define SB_GPIO_REG193 0xC1 |
| 1569 | #define SB_GPIO_REG194 0xC2 |
| 1570 | #define SB_GPIO_REG195 0xC3 |
| 1571 | #define SB_GPIO_REG196 0xC4 |
| 1572 | #define SB_GPIO_REG197 0xC5 |
| 1573 | #define SB_GPIO_REG198 0xC6 |
| 1574 | #define SB_GPIO_REG199 0xC7 |
| 1575 | #define SB_GPIO_REG200 0xC8 |
| 1576 | #define SB_GPIO_REG201 0xC9 |
| 1577 | #define SB_GPIO_REG202 0xCA |
| 1578 | #define SB_GPIO_REG203 0xCB |
| 1579 | #define SB_GPIO_REG204 0xCC |
| 1580 | #define SB_GPIO_REG205 0xCD |
| 1581 | #define SB_GPIO_REG206 0xCE |
| 1582 | #define SB_GPIO_REG207 0xCF |
| 1583 | #define SB_GPIO_REG208 0xD0 |
| 1584 | #define SB_GPIO_REG209 0xD1 |
| 1585 | #define SB_GPIO_REG210 0xD2 |
| 1586 | #define SB_GPIO_REG211 0xD3 |
| 1587 | #define SB_GPIO_REG212 0xD4 |
| 1588 | #define SB_GPIO_REG213 0xD5 |
| 1589 | #define SB_GPIO_REG214 0xD6 |
| 1590 | #define SB_GPIO_REG215 0xD7 |
| 1591 | #define SB_GPIO_REG216 0xD8 |
| 1592 | #define SB_GPIO_REG217 0xD9 |
| 1593 | #define SB_GPIO_REG218 0xDA |
| 1594 | #define SB_GPIO_REG219 0xDB |
| 1595 | #define SB_GPIO_REG220 0xDC |
| 1596 | #define SB_GPIO_REG221 0xDD |
| 1597 | #define SB_GPIO_REG222 0xDE |
| 1598 | #define SB_GPIO_REG223 0xDF |
| 1599 | #define SB_GPIO_REG224 0xF0 |
| 1600 | #define SB_GPIO_REG225 0xF1 |
| 1601 | #define SB_GPIO_REG226 0xF2 |
| 1602 | #define SB_GPIO_REG227 0xF3 |
| 1603 | #define SB_GPIO_REG228 0xF4 |
| 1604 | |
| 1605 | // |
| 1606 | // SB800 SB MMIO Base (SMBUS) |
| 1607 | // offset : 0xA00 |
| 1608 | // |
| 1609 | #define SB_SMBUS_REG12 0x12 // I2CbusConfig |
| 1610 | |
| 1611 | // |
| 1612 | // SB800 SB MMIO Base (MISC) |
| 1613 | // offset : 0xE00 |
| 1614 | // |
| 1615 | #define SB_MISC_REG00 0x00 // ClkCntrl0 |
| 1616 | /* |
| 1617 | SB_MISC_REG00 EQU 000h |
| 1618 | ClkCntrl0 EQU 0FFFFFFFFh |
| 1619 | */ |
| 1620 | #define SB_MISC_REG04 0x04 // ClkCntrl1 |
| 1621 | /* |
| 1622 | SB_MISC_REG04 EQU 004h |
| 1623 | ClkCntrl1 EQU 0FFFFFFFFh |
| 1624 | */ |
| 1625 | #define SB_MISC_REG08 0x08 // ClkCntrl2 |
| 1626 | /* |
| 1627 | SB_MISC_REG08 EQU 008h |
| 1628 | ClkCntrl2 EQU 0FFFFFFFFh |
| 1629 | */ |
| 1630 | #define SB_MISC_REG0C 0x0C // ClkCntrl3 |
| 1631 | /* |
| 1632 | SB_MISC_REG0C EQU 00Ch |
| 1633 | ClkCntrl3 EQU 0FFFFFFFFh |
| 1634 | */ |
| 1635 | #define SB_MISC_REG10 0x10 // ClkCntrl4 |
| 1636 | /* |
| 1637 | SB_MISC_REG10 EQU 010h |
| 1638 | ClkCntrl4 EQU 0FFFFFFFFh |
| 1639 | */ |
| 1640 | #define SB_MISC_REG14 0x14 // ClkCntrl5 |
| 1641 | /* |
| 1642 | SB_MISC_REG14 EQU 014h |
| 1643 | ClkCntrl5 EQU 0FFFFFFFFh |
| 1644 | */ |
| 1645 | #define SB_MISC_REG18 0x18 // ClkCntrl6 |
| 1646 | /* |
| 1647 | SB_MISC_REG18 EQU 018h |
| 1648 | ClkCntrl6 EQU 0FFFFFFFFh |
| 1649 | */ |
| 1650 | #define SB_MISC_REG30 0x30 // OscFreqCounter |
| 1651 | /* |
| 1652 | SB_MISC_REG30 EQU 030h |
| 1653 | OscCounter EQU 0FFFFFFFFh ; The 32bit register shows the number of OSC clock per second. |
| 1654 | */ |
| 1655 | #define SB_MISC_REG34 0x34 // HpetClkPeriod |
| 1656 | /* |
| 1657 | SB_MISC_REG34 EQU 034h |
| 1658 | HpetClkPeriod EQU 0FFFFFFFFh ; default - 0x429B17Eh (14.31818M). |
| 1659 | */ |
| 1660 | #define SB_MISC_REG40 0x40 // MiscCntrl for clock only |
| 1661 | /* |
| 1662 | SB_MISC_REG40 EQU 040h |
| 1663 | */ |
| 1664 | |
| 1665 | #define SB_MISC_REG80 0x80 /**< SB_MISC_REG80 |
| 1666 | * @par |
| 1667 | * StrapStatus [15.0] - SB800 chip Strap Status |
| 1668 | * @li <b>0001</b> - Not USED FWH |
| 1669 | * @li <b>0002</b> - Not USED LPC ROM |
| 1670 | * @li <b>0004</b> - EC enabled |
| 1671 | * @li <b>0008</b> - Reserved |
| 1672 | * @li <b>0010</b> - Internal Clock mode |
| 1673 | */ |
| 1674 | |
| 1675 | #define ChipSysNotUseFWHRom 0x0001 // EcPwm3 pad |
| 1676 | #define ChipSysNotUseLpcRom 0x0002 // Inverted version from EcPwm2 pad (default - 1) |
| 1677 | // Note: Both EcPwm3 and EcPwm2 straps pins are used to select boot ROM type. |
| 1678 | #define ChipSysEcEnable 0x0004 // Enable Embedded Controller (EC) |
| 1679 | #define ChipSysBootFailTmrEn 0x0008 // Enable Watchdog function |
| 1680 | #define ChipSysIntClkGen 0x0010 // Select 25Mhz crystal clock or 100Mhz PCI-E clock ** |
| 1681 | |
| 1682 | #define SB_MISC_REG84 0x84 // StrapOverride |
| 1683 | /* |
| 1684 | SB_MISC_REG84 EQU 084h |
| 1685 | Override FWHDisableStrap EQU BIT0 ; Override FWHDiableStrap value from external pin. |
| 1686 | Override UseLpcRomStrap EQU BIT1 ; Override UseLpcRomStrap value from external pin. |
| 1687 | Override EcEnableStrap EQU BIT2 ; Override EcEnableStrap value from external pin. |
| 1688 | Override BootFailTmrEnStrap EQU BIT3 ; Override BootFailTmrEnStrap value from external pin. |
| 1689 | Override DefaultModeStrap EQU BIT5 ; Override DefaultModeStrap value from external pin. |
| 1690 | Override I2CRomStrap EQU BIT7 ; Override I2CRomStrap value from external pin. |
| 1691 | Override ILAAutorunEnBStrap EQU BIT8 ; Override ILAAutorunEnBStrap value from external pin. |
| 1692 | Override FcPllBypStrap EQU BIT9 ; Override FcPllBypStrap value from external pin. |
| 1693 | Override PciPllBypStrap EQU BIT10 ; Override PciPllBypStrap value from external pin. |
| 1694 | Override ShortResetStrap EQU BIT11 ; Override ShortResetStrap value from external pin. |
| 1695 | Override FastBif2ClkStrap EQU BIT13 ; Override FastBif2ClkStrap value from external pin' |
| 1696 | PciRomBootStrap EQU BIT15 ; Override PCI Rom Boot Strap value from external pin ?? Not match 0x80 reg ?? |
| 1697 | BlinkSlowModestrap EQU BIT16 ; Override Blink Slow mode (100Mhz) from external pin' |
| 1698 | ClkGenStrap EQU BIT17 ; Override CLKGEN from external pin. |
| 1699 | BIF_GEN2_COMPL_Strap EQU BIT18 ; Override BIF_ GEN2_COMPLIANCE strap from external pin. |
| 1700 | StrapOverrideEn EQU BIT31 ; Enable override strapping feature. |
| 1701 | */ |
| 1702 | #define SB_MISC_REGC0 0xC0 // CPU_Pstate0 |
| 1703 | /* |
| 1704 | SB_MISC_REGC0 EQU 0C0h |
| 1705 | Core0_PState EQU BIT0+BIT1+BIT2 ; 000: P0 001: P1 010: P2 011: P3 100: P4 101: P5 110: P6 111: P7 |
| 1706 | Core1_PState EQU BIT4+BIT5+BIT6 |
| 1707 | Core2_PState EQU BIT8+BIT9+BIT10 |
| 1708 | Core3_PState EQU BIT12+BIT13+BIT14 |
| 1709 | Core4_PState EQU BIT16++BIT17+BIT18 |
| 1710 | Core5_PState EQU BIT20+BIT21+BIT22 |
| 1711 | Core6_PState EQU BIT24+BIT25+BIT26 |
| 1712 | Core7_PState EQU BIT28+BIT29+BIT30 |
| 1713 | */ |
| 1714 | #define SB_MISC_REGC4 0xC4 // CPU_Pstate1 |
| 1715 | /* |
| 1716 | SB_MISC_REGC4 EQU 0C4h |
| 1717 | Core8_PState EQU BIT0+BIT1+BIT2 ; 000: P0 001: P1 010: P2 011: P3 100: P4 101: P5 110: P6 111: P7 |
| 1718 | Core9_PState EQU BIT4+BIT5+BIT6 |
| 1719 | Core10_PState EQU BIT8+BIT9+BIT10 |
| 1720 | Core11_PState EQU BIT12+BIT13+BIT14 |
| 1721 | Core12_PState EQU BIT16++BIT17+BIT18 |
| 1722 | Core13_PState EQU BIT20+BIT21+BIT22 |
| 1723 | Core14_PState EQU BIT24+BIT25+BIT26 |
| 1724 | Core15_PState EQU BIT28+BIT29+BIT30 |
| 1725 | */ |
| 1726 | #define SB_MISC_REGD0 0xD0 // CPU_Cstate0 |
| 1727 | /* |
| 1728 | SB_MISC_REGD0 EQU 0D0h |
| 1729 | Core0_CState EQU BIT0+BIT1+BIT2 ; 000: C0 001: C1 010: C2 011: C3 100: C4 101: C5 110: C6 111: C7 |
| 1730 | Core1_CState EQU BIT4+BIT5+BIT6 |
| 1731 | Core2_CState EQU BIT8+BIT9+BIT10 |
| 1732 | Core3_CState EQU BIT12+BIT13+BIT14 |
| 1733 | Core4_CState EQU BIT16++BIT17+BIT18 |
| 1734 | Core5_CState EQU BIT20+BIT21+BIT22 |
| 1735 | Core6_CState EQU BIT24+BIT25+BIT26 |
| 1736 | Core7_CState EQU BIT28+BIT29+BIT30 |
| 1737 | */ |
| 1738 | #define SB_MISC_REGD4 0xD4 // CPU_Cstate1 |
| 1739 | /* |
| 1740 | SB_MISC_REGD4 EQU 0D4h |
| 1741 | Core8_CState EQU BIT0+BIT1+BIT2 ; 000: C0 001: C1 010: C2 011: C3 100: C4 101: C5 110: C6 111: C7 |
| 1742 | Core9_CState EQU BIT4+BIT5+BIT6 |
| 1743 | Core10_CState EQU BIT8+BIT9+BIT10 |
| 1744 | Core11_CState EQU BIT12+BIT13+BIT14 |
| 1745 | Core12_CState EQU BIT16++BIT17+BIT18 |
| 1746 | Core13_CState EQU BIT20+BIT21+BIT22 |
| 1747 | Core14_CState EQU BIT24+BIT25+BIT26 |
| 1748 | Core15_CState EQU BIT28+BIT29+BIT30 |
| 1749 | */ |
| 1750 | #define SB_MISC_REGF0 0xF0 // SataPortSts ?? EC touch only |
| 1751 | /* |
| 1752 | SB_MISC_REGF0 EQU 0F0h |
| 1753 | Port0Sts EQU BIT0 ; The selected status of Port 0. |
| 1754 | Port1Sts EQU BIT1 ; The selected status of Port 1 |
| 1755 | Port2Sts EQU BIT2 ; The selected status of Port 2. |
| 1756 | Port3Sts EQU BIT3 ; The selected status of Port 3 |
| 1757 | Port4Sts EQU BIT4 ; The selected status of Port 4. |
| 1758 | Port5Sts EQU BIT5 ; The selected status of Port 5 |
| 1759 | SataPortSel EQU BIT24+BIT25 ; 00 - Select "led" for Port 0 to 5 |
| 1760 | ; 01 - Select "delete" for Port 0 to 5 |
| 1761 | ; 10 - Select "err" for Port 0 to 5 |
| 1762 | ; 11 - Select "led" for Port 0 to 5 |
| 1763 | */ |
| 1764 | |
| 1765 | |
| 1766 | |
| 1767 | #define SB_RTC_REG00 0x00 // Seconds - RW |
| 1768 | #define SB_RTC_REG01 0x01 // Seconds Alarm - RW |
| 1769 | #define SB_RTC_REG02 0x02 // Minutes - RW |
| 1770 | #define SB_RTC_REG03 0x03 // Minutes Alarm - RW |
| 1771 | #define SB_RTC_REG04 0x04 // ours - RW |
| 1772 | #define SB_RTC_REG05 0x05 // ours Alarm- RW |
| 1773 | #define SB_RTC_REG06 0x06 // Day of Week - RW |
| 1774 | #define SB_RTC_REG07 0x07 // Date of Mont - RW |
| 1775 | #define SB_RTC_REG08 0x08 // Mont - RW |
| 1776 | #define SB_RTC_REG09 0x09 // Year - RW |
| 1777 | #define SB_RTC_REG0A 0x0A // Register A - RW |
| 1778 | #define SB_RTC_REG0B 0x0B // Register B - RW |
| 1779 | #define SB_RTC_REG0C 0x0C // Register C - R |
| 1780 | #define SB_RTC_REG0D 0x0D // DateAlarm - RW |
| 1781 | #define SB_RTC_REG32 0x32 // AltCentury - RW |
| 1782 | #define SB_RTC_REG48 0x48 // Century - RW |
| 1783 | #define SB_RTC_REG50 0x50 // Extended RAM Address Port - RW |
| 1784 | #define SB_RTC_REG53 0x53 // Extended RAM Data Port - RW |
| 1785 | #define SB_RTC_REG7E 0x7E // RTC Time Clear - RW |
| 1786 | #define SB_RTC_REG7F 0x7F // RTC RAM Enable - RW |
| 1787 | |
| 1788 | #define SB_ECMOS_REG00 0x00 // scratch - reg |
| 1789 | //;BIT0=0 AsicDebug is enabled |
| 1790 | //;BIT1=0 SLT S3 runs |
| 1791 | #define SB_ECMOS_REG01 0x01 |
| 1792 | #define SB_ECMOS_REG02 0x02 |
| 1793 | #define SB_ECMOS_REG03 0x03 |
| 1794 | #define SB_ECMOS_REG04 0x04 |
| 1795 | #define SB_ECMOS_REG05 0x05 |
| 1796 | #define SB_ECMOS_REG06 0x06 |
| 1797 | #define SB_ECMOS_REG07 0x07 |
| 1798 | #define SB_ECMOS_REG08 0x08 // save 32BIT Physical address of Config structure |
| 1799 | #define SB_ECMOS_REG09 0x09 |
| 1800 | #define SB_ECMOS_REG0A 0x0A |
| 1801 | #define SB_ECMOS_REG0B 0x0B |
| 1802 | |
| 1803 | #define SB_ECMOS_REG0C 0x0C //;save MODULE_ID |
| 1804 | #define SB_ECMOS_REG0D 0x0D //;Reserve for NB |
| 1805 | |
| 1806 | #define SB_IOMAP_REG00 0x000 // Dma_C 0 |
| 1807 | #define SB_IOMAP_REG02 0x002 // Dma_C 1 |
| 1808 | #define SB_IOMAP_REG04 0x004 // Dma_C 2 |
| 1809 | #define SB_IOMAP_REG06 0x006 // Dma_C 3 |
| 1810 | #define SB_IOMAP_REG08 0x008 // Dma_Status |
| 1811 | #define SB_IOMAP_REG09 0x009 // Dma_WriteRest |
| 1812 | #define SB_IOMAP_REG0A 0x00A // Dma_WriteMask |
| 1813 | #define SB_IOMAP_REG0B 0x00B // Dma_WriteMode |
| 1814 | #define SB_IOMAP_REG0C 0x00C // Dma_Clear |
| 1815 | #define SB_IOMAP_REG0D 0x00D // Dma_MasterClr |
| 1816 | #define SB_IOMAP_REG0E 0x00E // Dma_ClrMask |
| 1817 | #define SB_IOMAP_REG0F 0x00F // Dma_AllMask |
| 1818 | #define SB_IOMAP_REG20 0x020 // IntrCntrlReg1 |
| 1819 | #define SB_IOMAP_REG21 0x021 // IntrCntrlReg2 |
| 1820 | #define SB_IOMAP_REG40 0x040 // TimerC0 |
| 1821 | #define SB_IOMAP_REG41 0x041 // TimerC1 |
| 1822 | #define SB_IOMAP_REG42 0x042 // TimerC2 |
| 1823 | #define SB_IOMAP_REG43 0x043 // Tmr1CntrlWord |
| 1824 | #define SB_IOMAP_REG61 0x061 // Nmi_Status |
| 1825 | #define SB_IOMAP_REG70 0x070 // Nmi_Enable |
| 1826 | #define SB_IOMAP_REG71 0x071 // RtcDataPort |
| 1827 | #define SB_IOMAP_REG72 0x072 // AlternatRtcAddrPort |
| 1828 | #define SB_IOMAP_REG73 0x073 // AlternatRtcDataPort |
| 1829 | #define SB_IOMAP_REG80 0x080 // Dma_Page_Reserved0 |
| 1830 | #define SB_IOMAP_REG81 0x081 // Dma_PageC2 |
| 1831 | #define SB_IOMAP_REG82 0x082 // Dma_PageC3 |
| 1832 | #define SB_IOMAP_REG83 0x083 // Dma_PageC1 |
| 1833 | #define SB_IOMAP_REG84 0x084 // Dma_Page_Reserved1 |
| 1834 | #define SB_IOMAP_REG85 0x085 // Dma_Page_Reserved2 |
| 1835 | #define SB_IOMAP_REG86 0x086 // Dma_Page_Reserved3 |
| 1836 | #define SB_IOMAP_REG87 0x087 // Dma_PageC0 |
| 1837 | #define SB_IOMAP_REG88 0x088 // Dma_Page_Reserved4 |
| 1838 | #define SB_IOMAP_REG89 0x089 // Dma_PageC6 |
| 1839 | #define SB_IOMAP_REG8A 0x08A // Dma_PageC7 |
| 1840 | #define SB_IOMAP_REG8B 0x08B // Dma_PageC5 |
| 1841 | #define SB_IOMAP_REG8C 0x08C // Dma_Page_Reserved5 |
| 1842 | #define SB_IOMAP_REG8D 0x08D // Dma_Page_Reserved6 |
| 1843 | #define SB_IOMAP_REG8E 0x08E // Dma_Page_Reserved7 |
| 1844 | #define SB_IOMAP_REG8F 0x08F // Dma_Refres |
| 1845 | #define SB_IOMAP_REG92 0x092 // FastInit |
| 1846 | #define SB_IOMAP_REGA0 0x0A0 // IntrCntrl2Reg1 |
| 1847 | #define SB_IOMAP_REGA1 0x0A1 // IntrCntrl2Reg2 |
| 1848 | #define SB_IOMAP_REGC0 0x0C0 // Dma2_C4Addr |
| 1849 | #define SB_IOMAP_REGC2 0x0C2 // Dma2_C4Cnt |
| 1850 | #define SB_IOMAP_REGC4 0x0C4 // Dma2_C5Addr |
| 1851 | #define SB_IOMAP_REGC6 0x0C6 // Dma2_C5Cnt |
| 1852 | #define SB_IOMAP_REGC8 0x0C8 // Dma2_C6Addr |
| 1853 | #define SB_IOMAP_REGCA 0x0CA // Dma2_C6Cnt |
| 1854 | #define SB_IOMAP_REGCC 0x0CC // Dma2_C7Addr |
| 1855 | #define SB_IOMAP_REGCE 0x0CE // Dma2_C7Cnt |
| 1856 | #define SB_IOMAP_REGD0 0x0D0 // Dma_Status |
| 1857 | #define SB_IOMAP_REGD2 0x0D2 // Dma_WriteRest |
| 1858 | #define SB_IOMAP_REGD4 0x0D4 // Dma_WriteMask |
| 1859 | #define SB_IOMAP_REGD6 0x0D6 // Dma_WriteMode |
| 1860 | #define SB_IOMAP_REGD8 0x0D8 // Dma_Clear |
| 1861 | #define SB_IOMAP_REGDA 0x0DA // Dma_Clear |
| 1862 | #define SB_IOMAP_REGDC 0x0DC // Dma_ClrMask |
| 1863 | #define SB_IOMAP_REGDE 0x0DE // Dma_ClrMask |
| 1864 | #define SB_IOMAP_REGF0 0x0F0 // NCP_Error |
| 1865 | #define SB_IOMAP_REG40B 0x040B // DMA1_Extend |
| 1866 | #define SB_IOMAP_REG4D0 0x04D0 // IntrEdgeControl |
| 1867 | #define SB_IOMAP_REG4D6 0x04D6 // DMA2_Extend |
| 1868 | #define SB_IOMAP_REGC00 0x0C00 // Pci_Intr_Index |
| 1869 | #define SB_IOMAP_REGC01 0x0C01 // Pci_Intr_Data |
| 1870 | #define SB_IOMAP_REGC14 0x0C14 // Pci_Error |
| 1871 | #define SB_IOMAP_REGC50 0x0C50 // CMIndex |
| 1872 | #define SB_IOMAP_REGC51 0x0C51 // CMData |
| 1873 | #define SB_IOMAP_REGC52 0x0C52 // GpmPort |
| 1874 | #define SB_IOMAP_REGC6F 0x0C6F // Isa_Misc |
| 1875 | #define SB_IOMAP_REGCD0 0x0CD0 // PMio2_Index |
| 1876 | #define SB_IOMAP_REGCD1 0x0CD1 // PMio2_Data |
| 1877 | #define SB_IOMAP_REGCD4 0x0CD4 // BIOSRAM_Index |
| 1878 | #define SB_IOMAP_REGCD5 0x0CD5 // BIOSRAM_Data |
| 1879 | #define SB_IOMAP_REGCD6 0x0CD6 // PM_Index |
| 1880 | #define SB_IOMAP_REGCD7 0x0CD7 // PM_Data |
| 1881 | #define SB_IOMAP_REGCF9 0x0CF9 // CF9Rst reg |
| 1882 | |
| 1883 | |
| 1884 | #define SB_SPI_MMIO_REG00 0x00 //SPI_ |
| 1885 | #define SB_SPI_MMIO_REG0C 0x0C //SPI_Cntrl1 Register |
| 1886 | |
| 1887 | #define AMD_NB_REG78 0x78 |
| 1888 | #define AMD_NB_SCRATCH AMD_NB_REG78 |
| 1889 | #define MailBoxPort 0x3E |
| 1890 | |
| 1891 | // GPP Link Configuration |
| 1892 | #define GPP_CFGMODE_X4000 0x0 |
| 1893 | #define GPP_CFGMODE_X2200 0x2 |
| 1894 | #define GPP_CFGMODE_X2110 0x3 |
| 1895 | #define GPP_CFGMODE_X1111 0x4 |
| 1896 | |
| 1897 | #define MAX_TRAINING_RETRY 0x4000 |
| 1898 | #define MAX_GPP_RESETS 8 //lx-temp to confirm with jason |
| 1899 | |
| 1900 | |
| 1901 | #pragma pack (pop) |
| 1902 | |