Patrick Georgi | 0588d19 | 2009-08-12 15:00:51 +0000 | [diff] [blame] | 1 | chip northbridge/intel/i440bx # Northbridge |
Stefan Reinauer | 0aa37c4 | 2013-02-12 15:20:54 -0800 | [diff] [blame] | 2 | device cpu_cluster 0 on # APIC cluster |
Uwe Hermann | 53c7276 | 2010-03-13 20:36:11 +0000 | [diff] [blame] | 3 | chip cpu/intel/slot_1 # CPU |
Patrick Georgi | 8d31368 | 2010-05-05 13:12:42 +0000 | [diff] [blame] | 4 | device lapic 0 on end # APIC |
Patrick Georgi | 0588d19 | 2009-08-12 15:00:51 +0000 | [diff] [blame] | 5 | end |
| 6 | end |
Stefan Reinauer | 4aff445 | 2013-02-12 14:17:15 -0800 | [diff] [blame] | 7 | device domain 0 on # PCI domain |
Patrick Georgi | 0588d19 | 2009-08-12 15:00:51 +0000 | [diff] [blame] | 8 | device pci 0.0 on end # Host bridge |
| 9 | device pci 1.0 on end # PCI/AGP bridge |
| 10 | chip southbridge/intel/i82371eb # Southbridge |
| 11 | device pci 7.0 on # ISA bridge |
| 12 | chip superio/winbond/w83977tf # Super I/O |
| 13 | device pnp 3f0.0 on # Floppy |
| 14 | io 0x60 = 0x3f0 |
| 15 | irq 0x70 = 6 |
| 16 | drq 0x74 = 2 |
| 17 | end |
| 18 | device pnp 3f0.1 on # Parallel port |
| 19 | io 0x60 = 0x378 |
| 20 | irq 0x70 = 7 |
| 21 | drq 0x74 = 3 |
| 22 | end |
| 23 | device pnp 3f0.2 on # COM1 |
| 24 | io 0x60 = 0x3f8 |
| 25 | irq 0x70 = 4 |
| 26 | end |
| 27 | device pnp 3f0.3 on # COM2 / IR |
| 28 | io 0x60 = 0x2f8 |
| 29 | irq 0x70 = 3 |
| 30 | end |
| 31 | device pnp 3f0.5 on # PS/2 keyboard |
| 32 | io 0x60 = 0x60 |
| 33 | io 0x62 = 0x64 |
| 34 | irq 0x70 = 1 # PS/2 keyboard interrupt |
| 35 | irq 0x72 = 12 # PS/2 mouse interrupt |
| 36 | end |
| 37 | device pnp 3f0.7 on # GPIO 1 |
| 38 | end |
| 39 | device pnp 3f0.8 on # GPIO 2 |
| 40 | end |
| 41 | device pnp 3f0.9 on # GPIO 3 |
| 42 | end |
| 43 | device pnp 3f0.a on # ACPI |
| 44 | end |
| 45 | end |
| 46 | end |
| 47 | device pci 7.1 on end # IDE |
| 48 | device pci 7.2 on end # USB |
| 49 | device pci 7.3 on end # ACPI |
| 50 | register "ide0_enable" = "1" |
| 51 | register "ide1_enable" = "1" |
| 52 | register "ide_legacy_enable" = "1" |
| 53 | # Enable UDMA/33 for higher speed if your IDE device(s) support it. |
| 54 | register "ide0_drive0_udma33_enable" = "0" |
| 55 | register "ide0_drive1_udma33_enable" = "0" |
| 56 | register "ide1_drive0_udma33_enable" = "0" |
| 57 | register "ide1_drive1_udma33_enable" = "0" |
| 58 | end |
| 59 | end |
| 60 | end |