src/mainboard/gizmosphere/gizmo/platform_cfg.h

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2011 Advanced Micro Devices, Inc.
 * Copyright (C) 2013 Sage Electronic Engineering, LLC
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */


#ifndef _PLATFORM_CFG_H_
#define _PLATFORM_CFG_H_

/* Gizmo has no legacy P/S2 controller */
#define LEGACY_FREE		1

/**
 * @def BIOS_SIZE
 *      BIOS_SIZE_{1,2,4,8,16}M
 *
 * In SB800, default ROM size is 1M Bytes, if your platform ROM
 * bigger than 1M you have to set the ROM size outside CIMx module and
 * before AGESA module get call.
 */
#ifndef BIOS_SIZE
#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1)
#endif /* BIOS_SIZE */

/**
 * @def SPREAD_SPECTRUM
 * @brief
 *  0 - Disable Spread Spectrum function
 *  1 - Enable  Spread Spectrum function
 */
#define SPREAD_SPECTRUM			0

/**
 * @def SB_HPET_TIMER
 * @brief
 *  0 - Disable hpet
 *  1 - Enable  hpet
 */
#define HPET_TIMER			1

/**
 * @def USB_CONFIG
 * @brief bit[0-6] used to control USB
 *   0 - Disable
 *   1 - Enable
 *  Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0
 *  Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1
 *  Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2
 *  Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3
 *  Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4
 *  Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5
 *  Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6
 */
#define USB_CONFIG		0x7F

/**
 * @def PCI_CLOCK_CTRL
 * @brief bit[0-4] used for PCI Slots Clock Control,
 *   0 - disable
 *   1 - enable
 *  PCI SLOT 0 define at BIT0
 *  PCI SLOT 1 define at BIT1
 *  PCI SLOT 2 define at BIT2
 *  PCI SLOT 3 define at BIT3
 *  PCI SLOT 4 define at BIT4
 */
#define PCI_CLOCK_CTRL			0x00 /* PCI clocks aren't used on Gizmo */

/**
 * @def SATA_CONTROLLER
 * @brief INCHIP Sata Controller
 */
#define SATA_CONTROLLER		CIMX_OPTION_ENABLED

/**
 * @def SATA_MODE
 * @brief INCHIP Sata Controller Mode
 *   NOTE: DO NOT ALLOW SATA & IDE use same mode
 */
#define SATA_MODE			CONFIG_SB800_SATA_MODE

/**
 * @brief INCHIP Sata IDE Controller Mode
 */
#define IDE_LEGACY_MODE			0
#define IDE_NATIVE_MODE			1

/**
 * @def SATA_IDE_MODE
 * @brief INCHIP Sata IDE Controller Mode
 *   NOTE: DO NOT ALLOW SATA & IDE use same mode
 */
#define SATA_IDE_MODE			IDE_LEGACY_MODE

/**
 * @def EXTERNAL_CLOCK
 * @brief 00/10: Reference clock from crystal oscillator via
 *  PAD_XTALI and PAD_XTALO
 *
 * @def INTERNAL_CLOCK
 * @brief 01/11: Reference clock from internal clock through
 *  CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL
 */
#define EXTERNAL_CLOCK		0x00
#define INTERNAL_CLOCK		0x01

/* NOTE: inagua have to using internal clock,
 * otherwise can not detect sata drive
 */
#define SATA_CLOCK_SOURCE	INTERNAL_CLOCK

/**
 * @def SATA_PORT_MULT_CAP_RESERVED
 * @brief 1 ON, 0 0FF
 */
#define SATA_PORT_MULT_CAP_RESERVED	1


/**
 * @def   AZALIA_AUTO
 * @brief Detect Azalia controller automatically.
 *
 * @def   AZALIA_DISABLE
 * @brief Disable Azalia controller.

 * @def   AZALIA_ENABLE
 * @brief Enable Azalia controller.
 */
#define AZALIA_AUTO			0
#define AZALIA_DISABLE			1
#define AZALIA_ENABLE			2

/**
 * @brief INCHIP HDA controller
 */
#define AZALIA_CONTROLLER		AZALIA_AUTO

/**
 * @def AZALIA_PIN_CONFIG
 * @brief
 *  0 - disable
 *  1 - enable
 */
#define AZALIA_PIN_CONFIG		1

/**
 * @def AZALIA_SDIN_PIN
 * @brief
 *  SDIN0 is define at BIT0 & BIT1
 *   00 - GPIO PIN
 *   01 - Reserved
 *   10 - As a Azalia SDIN pin
 *  SDIN1 is define at BIT2 & BIT3
 *  SDIN2 is define at BIT4 & BIT5
 *  SDIN3 is define at BIT6 & BIT7
 */
//#define AZALIA_SDIN_PIN		0xAA
#define AZALIA_SDIN_PIN			0x2A

/**
 * @def GPP_CONTROLLER
 */
#define GPP_CONTROLLER			CIMX_OPTION_ENABLED

/**
 * @def GPP_CFGMODE
 * @brief GPP Link Configuration
 * four possible configuration:
 *  GPP_CFGMODE_X4000
 *  GPP_CFGMODE_X2200
 *  GPP_CFGMODE_X2110
 *  GPP_CFGMODE_X1111
 */
#define GPP_CFGMODE			GPP_CFGMODE_X1111

/**
 * @def NB_SB_GEN2
 *    0  - Disable
 *    1  - Enable
 */
#define NB_SB_GEN2			TRUE

/**
 * @def SB_GPP_GEN2
 *    0  - Disable
 *    1  - Enable
 */
#define SB_GPP_GEN2			TRUE

/**
 * @def SB_GPP_UNHIDE_PORTS
 *    TRUE   - ports visible always, even port empty
 *    FALSE  - ports invisible if port empty
 */
#define SB_GPP_UNHIDE_PORTS		TRUE

/**
 * @def   GEC_CONFIG
 *    0  - Enable
 *    1  - Disable
 */
#define GEC_CONFIG			0

const static CODECENTRY gizmo_codec_alc272[] =
{
	/* NID, PinConfig */
	{0x11, 0x411111F0},	/* S/PDIF-OUT2 unused */
	{0x12, 0x411111F0},	/* DMIC-1/2 unused */
	{0x13, 0x411111F0},	/* DMIC-3/4 unused */
	{0x14, 0x411111F0},	/* LOUT-1 unused */
	{0x15, 0x21000100},	/* LOUT2 - to Explorer */
	{0x17, 0x411111F0},	/* MONO-OUT unused */
	{0x18, 0x01A15010},	/* MIC1 */
	{0x19, 0x411111F0},	/* MIC2 unused */
	{0x1A, 0x01013010},	/* LINE1 */
	{0x1B, 0x21800101},	/* LINE2 from Explorer */
	{0x1D, 0x40100000},	/* PCBEEP */
	{0x1E, 0x411111F0},	/* S/PDIF-OUT1 unused */
	{0x21, 0x01214010},	/* HPOUT */
	{0xff, 0xffffffff}	/* end of table */
};

static const CODECTBLLIST codec_tablelist[] =
{
	{0x010ec0272, (CODECENTRY*)&gizmo_codec_alc272[0]},
	{0x0FFFFFFFFUL, (CODECENTRY*)0x0FFFFFFFFUL}
};

/**
 * @def AZALIA_OEM_VERB_TABLE
 *  Mainboard specific codec verb table list
 */
#define AZALIA_OEM_VERB_TABLE		(&codec_tablelist[0])

/* set up an ACPI preferred power management profile */
/*  from acpi.h
 *	PM_UNSPECIFIED          = 0,
 *	PM_DESKTOP              = 1,
 *	PM_MOBILE               = 2,
 *	PM_WORKSTATION          = 3,
 *	PM_ENTERPRISE_SERVER    = 4,
 *	PM_SOHO_SERVER          = 5,
 *	PM_APPLIANCE_PC         = 6,
 *	PM_PERFORMANCE_SERVER   = 7,
 *	PM_TABLET               = 8
 */
#define FADT_PM_PROFILE 1

#endif