Sean Rhodes | 296994b | 2021-10-14 20:58:15 +0100 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0-only */ |
| 2 | |
| 3 | #include <console/console.h> |
Sean Rhodes | 296994b | 2021-10-14 20:58:15 +0100 | [diff] [blame] | 4 | #include <device/device.h> |
| 5 | #include <device/pnp.h> |
| 6 | #include <ec/acpi/ec.h> |
| 7 | #include <option.h> |
| 8 | #include <pc80/keyboard.h> |
Sean Rhodes | 0579c60 | 2023-02-16 15:00:14 +0000 | [diff] [blame] | 9 | #include <halt.h> |
Sean Rhodes | 296994b | 2021-10-14 20:58:15 +0100 | [diff] [blame] | 10 | |
| 11 | #include "ec.h" |
| 12 | #include "ecdefs.h" |
| 13 | |
Sean Rhodes | 6082ee5 | 2022-03-09 08:07:30 +0000 | [diff] [blame] | 14 | uint16_t ec_get_version(void) |
Sean Rhodes | 296994b | 2021-10-14 20:58:15 +0100 | [diff] [blame] | 15 | { |
| 16 | return (ec_read(ECRAM_MAJOR_VERSION) << 8) | ec_read(ECRAM_MINOR_VERSION); |
| 17 | } |
| 18 | |
| 19 | static uint8_t get_ec_value_from_option(const char *name, |
| 20 | unsigned int fallback, |
| 21 | const uint8_t *lut, |
| 22 | size_t lut_size) |
| 23 | { |
| 24 | unsigned int index = get_uint_option(name, fallback); |
| 25 | if (index >= lut_size) |
| 26 | index = fallback; |
| 27 | return lut[index]; |
| 28 | } |
| 29 | |
Sean Rhodes | 0579c60 | 2023-02-16 15:00:14 +0000 | [diff] [blame] | 30 | static void ec_mirror_with_count(void) |
| 31 | { |
| 32 | unsigned int cmos_mirror_flag_counter = get_uint_option("mirror_flag_counter", UINT_MAX); |
| 33 | |
| 34 | if (cmos_mirror_flag_counter != UINT_MAX) { |
| 35 | printk(BIOS_DEBUG, "ITE: mirror_flag_counter = %u\n", cmos_mirror_flag_counter); |
| 36 | |
| 37 | /* Avoid boot loops by only trying a state change once */ |
| 38 | if (cmos_mirror_flag_counter < MIRROR_ATTEMPTS) { |
| 39 | cmos_mirror_flag_counter++; |
| 40 | set_uint_option("mirror_flag_counter", cmos_mirror_flag_counter); |
| 41 | printk(BIOS_DEBUG, "ITE: Mirror attempt %u/%u.\n", cmos_mirror_flag_counter, |
| 42 | MIRROR_ATTEMPTS); |
| 43 | |
| 44 | /* Write the EC mirror flag */ |
| 45 | ec_write(ECRAM_MIRROR_FLAG, MIRROR_ENABLED); |
| 46 | |
| 47 | /* Check what has been written */ |
| 48 | if (ec_read(ECRAM_MIRROR_FLAG) == MIRROR_ENABLED) |
| 49 | poweroff(); |
| 50 | } else { |
| 51 | /* |
| 52 | * If the mirror flags fails after 1 attempt, it will |
| 53 | * likely need a cold boot, or recovering. |
| 54 | */ |
| 55 | printk(BIOS_ERR, "ITE: Failed to mirror the EC in %u attempts!\n", |
| 56 | MIRROR_ATTEMPTS); |
| 57 | } |
| 58 | } else { |
| 59 | printk(BIOS_DEBUG, "ITE: Powering Off"); |
| 60 | /* Write the EC mirror flag */ |
| 61 | ec_write(ECRAM_MIRROR_FLAG, MIRROR_ENABLED); |
| 62 | |
| 63 | /* Check what has been written */ |
| 64 | if (ec_read(ECRAM_MIRROR_FLAG) == MIRROR_ENABLED) |
| 65 | poweroff(); |
| 66 | } |
| 67 | } |
| 68 | |
| 69 | |
| 70 | void ec_mirror_flag(void) |
| 71 | { |
| 72 | /* |
| 73 | * For the mirror flag to work, the status of the EC pin must be known |
| 74 | * at all times, which means external power. This can be either a DC |
| 75 | * charger, or PD with CCG6. PD with an ANX7447 requires configuration |
| 76 | * from the EC, so the update will interrupt this. |
| 77 | * |
| 78 | * This means we can unconditionally apply the mirror flag to devices |
| 79 | * that have CCG6, present on devices with TBT, but have a manual |
| 80 | * flag for devices without it. |
| 81 | */ |
Sean Rhodes | 7d00b7c | 2023-07-07 14:27:28 +0100 | [diff] [blame^] | 82 | uint16_t ec_version = ec_get_version(); |
| 83 | |
Sean Rhodes | 0579c60 | 2023-02-16 15:00:14 +0000 | [diff] [blame] | 84 | if (CONFIG(EC_STARLABS_MIRROR_SUPPORT) && |
| 85 | (CONFIG(SOC_INTEL_COMMON_BLOCK_TCSS) || get_uint_option("mirror_flag", 0)) && |
Sean Rhodes | 7d00b7c | 2023-07-07 14:27:28 +0100 | [diff] [blame^] | 86 | (ec_version != CONFIG_EC_STARLABS_MIRROR_VERSION)) { |
| 87 | printk(BIOS_ERR, "ITE: EC version 0x%x doesn't match coreboot version 0x%x.\n", |
| 88 | ec_version, CONFIG_EC_STARLABS_MIRROR_VERSION); |
Sean Rhodes | 0579c60 | 2023-02-16 15:00:14 +0000 | [diff] [blame] | 89 | ec_mirror_with_count(); |
| 90 | } |
| 91 | } |
| 92 | |
Sean Rhodes | 6082ee5 | 2022-03-09 08:07:30 +0000 | [diff] [blame] | 93 | static uint16_t ec_get_chip_id(unsigned int port) |
Sean Rhodes | 296994b | 2021-10-14 20:58:15 +0100 | [diff] [blame] | 94 | { |
| 95 | return (pnp_read_index(port, ITE_CHIPID1) << 8) | |
| 96 | pnp_read_index(port, ITE_CHIPID2); |
| 97 | } |
| 98 | |
| 99 | static void merlin_init(struct device *dev) |
| 100 | { |
| 101 | if (!dev->enabled) |
| 102 | return; |
| 103 | |
| 104 | /* |
| 105 | * The address/data IO port pair for the ite EC are configurable |
| 106 | * through the EC domain and are fixed by the EC's firmware blob. If |
| 107 | * the value(s) passed through the "dev" structure don't match the |
| 108 | * expected values then output severe warnings. |
| 109 | */ |
| 110 | if (dev->path.pnp.port != ITE_FIXED_ADDR) { |
| 111 | printk(BIOS_ERR, "ITE: Incorrect ports defined in devicetree.cb.\n"); |
| 112 | printk(BIOS_ERR, "ITE: Serious operational issues will arise.\n"); |
| 113 | return; |
| 114 | } |
| 115 | |
Sean Rhodes | 6082ee5 | 2022-03-09 08:07:30 +0000 | [diff] [blame] | 116 | const uint16_t chip_id = ec_get_chip_id(dev->path.pnp.port); |
Sean Rhodes | 296994b | 2021-10-14 20:58:15 +0100 | [diff] [blame] | 117 | |
| 118 | if (chip_id != ITE_CHIPID_VAL) { |
| 119 | printk(BIOS_ERR, "ITE: Expected chip ID 0x%04x, but got 0x%04x instead.\n", |
| 120 | ITE_CHIPID_VAL, chip_id); |
| 121 | return; |
| 122 | } |
| 123 | |
Sean Rhodes | 0579c60 | 2023-02-16 15:00:14 +0000 | [diff] [blame] | 124 | ec_mirror_flag(); |
| 125 | |
Sean Rhodes | 296994b | 2021-10-14 20:58:15 +0100 | [diff] [blame] | 126 | pc_keyboard_init(NO_AUX_DEVICE); |
| 127 | |
| 128 | /* |
| 129 | * Restore settings from CMOS into EC RAM: |
| 130 | * |
| 131 | * kbl_timeout |
| 132 | * fn_ctrl_swap |
| 133 | * max_charge |
| 134 | * fan_mode |
| 135 | * fn_lock_state |
| 136 | * trackpad_state |
| 137 | * kbl_brightness |
| 138 | * kbl_state |
| 139 | */ |
| 140 | |
| 141 | /* |
| 142 | * Keyboard Backlight Timeout |
| 143 | * |
| 144 | * Setting: kbl_timeout |
| 145 | * |
| 146 | * Values: 30 Seconds, 1 Minute, 3 Minutes, 5 Minutes, Never |
| 147 | * Default: 30 Seconds |
| 148 | * |
| 149 | */ |
| 150 | const uint8_t kbl_timeout[] = { |
| 151 | SEC_30, |
| 152 | MIN_1, |
| 153 | MIN_3, |
| 154 | MIN_5, |
| 155 | NEVER |
| 156 | }; |
| 157 | |
| 158 | ec_write(ECRAM_KBL_TIMEOUT, |
| 159 | get_ec_value_from_option("kbl_timeout", |
| 160 | 0, |
| 161 | kbl_timeout, |
| 162 | ARRAY_SIZE(kbl_timeout))); |
| 163 | |
| 164 | /* |
| 165 | * Fn Ctrl Reverse |
| 166 | * |
| 167 | * Setting: fn_ctrl_swap |
| 168 | * |
| 169 | * Values: Enabled, Disabled |
| 170 | * Default: Disabled |
| 171 | * |
| 172 | */ |
| 173 | const uint8_t fn_ctrl_swap[] = { |
| 174 | FN_CTRL, |
| 175 | CTRL_FN |
| 176 | }; |
| 177 | |
| 178 | ec_write(ECRAM_FN_CTRL_REVERSE, |
| 179 | get_ec_value_from_option("fn_ctrl_swap", |
Sean Rhodes | c45cfad | 2023-04-25 22:51:57 +0100 | [diff] [blame] | 180 | 0, |
Sean Rhodes | 296994b | 2021-10-14 20:58:15 +0100 | [diff] [blame] | 181 | fn_ctrl_swap, |
| 182 | ARRAY_SIZE(fn_ctrl_swap))); |
| 183 | |
| 184 | /* |
| 185 | * Maximum Charge Level |
| 186 | * |
| 187 | * Setting: max_charge |
| 188 | * |
| 189 | * Values: 60%, 80%, 100% |
| 190 | * Default: 100% |
| 191 | * |
| 192 | */ |
| 193 | const uint8_t max_charge[] = { |
| 194 | CHARGE_100, |
| 195 | CHARGE_80, |
| 196 | CHARGE_60 |
| 197 | }; |
| 198 | |
Sean Rhodes | 4d1bf7b | 2022-02-17 13:55:34 +0000 | [diff] [blame] | 199 | if (CONFIG(EC_STARLABS_MAX_CHARGE)) |
| 200 | ec_write(ECRAM_MAX_CHARGE, |
| 201 | get_ec_value_from_option("max_charge", |
| 202 | 0, |
| 203 | max_charge, |
| 204 | ARRAY_SIZE(max_charge))); |
Sean Rhodes | 296994b | 2021-10-14 20:58:15 +0100 | [diff] [blame] | 205 | |
| 206 | /* |
| 207 | * Fan Mode |
| 208 | * |
| 209 | * Setting: fan_mode |
| 210 | * |
| 211 | * Values: Quiet, Normal, Aggressive |
| 212 | * Default: Normal |
| 213 | * |
| 214 | */ |
| 215 | const uint8_t fan_mode[] = { |
| 216 | FAN_NORMAL, |
| 217 | FAN_AGGRESSIVE, |
| 218 | FAN_QUIET |
| 219 | }; |
| 220 | |
| 221 | if (CONFIG(EC_STARLABS_FAN)) |
| 222 | ec_write(ECRAM_FAN_MODE, |
| 223 | get_ec_value_from_option("fan_mode", |
| 224 | 0, |
| 225 | fan_mode, |
| 226 | ARRAY_SIZE(fan_mode))); |
| 227 | |
| 228 | /* |
| 229 | * Function Lock |
| 230 | * |
| 231 | * Setting: fn_lock_state |
| 232 | * |
| 233 | * Values: Locked, Unlocked |
| 234 | * Default: Locked |
| 235 | * |
| 236 | */ |
| 237 | const uint8_t fn_lock_state[] = { |
| 238 | UNLOCKED, |
| 239 | LOCKED |
| 240 | }; |
| 241 | |
| 242 | ec_write(ECRAM_FN_LOCK_STATE, |
| 243 | get_ec_value_from_option("fn_lock_state", |
| 244 | 1, |
| 245 | fn_lock_state, |
| 246 | ARRAY_SIZE(fn_lock_state))); |
| 247 | |
| 248 | /* |
| 249 | * Trackpad State |
| 250 | * |
| 251 | * Setting: trackpad_state |
| 252 | * |
| 253 | * Values: Enabled, Disabled |
| 254 | * Default: Enabled |
| 255 | * |
| 256 | */ |
| 257 | const uint8_t trackpad_state[] = { |
| 258 | TRACKPAD_ENABLED, |
| 259 | TRACKPAD_DISABLED |
| 260 | }; |
| 261 | |
| 262 | ec_write(ECRAM_TRACKPAD_STATE, |
| 263 | get_ec_value_from_option("trackpad_state", |
| 264 | 0, |
| 265 | trackpad_state, |
| 266 | ARRAY_SIZE(trackpad_state))); |
| 267 | |
| 268 | /* |
| 269 | * Keyboard Backlight Brightness |
| 270 | * |
| 271 | * Setting: kbl_brightness |
| 272 | * |
| 273 | * Values: Off, Low, High / Off, On |
| 274 | * Default: Low |
| 275 | * |
| 276 | */ |
| 277 | const uint8_t kbl_brightness[] = { |
| 278 | KBL_ON, |
| 279 | KBL_OFF, |
| 280 | KBL_LOW, |
| 281 | KBL_HIGH |
| 282 | }; |
| 283 | |
| 284 | if (CONFIG(EC_STARLABS_KBL_LEVELS)) |
| 285 | ec_write(ECRAM_KBL_BRIGHTNESS, |
| 286 | get_ec_value_from_option("kbl_brightness", |
| 287 | 2, |
| 288 | kbl_brightness, |
| 289 | ARRAY_SIZE(kbl_brightness))); |
| 290 | else |
| 291 | ec_write(ECRAM_KBL_BRIGHTNESS, |
| 292 | get_ec_value_from_option("kbl_brightness", |
| 293 | 0, |
| 294 | kbl_brightness, |
| 295 | ARRAY_SIZE(kbl_brightness))); |
| 296 | |
| 297 | /* |
| 298 | * Keyboard Backlight State |
| 299 | * |
| 300 | * Setting: kbl_state |
| 301 | * |
| 302 | * Values: Off, On |
| 303 | * Default: On |
| 304 | * |
| 305 | */ |
| 306 | const uint8_t kbl_state[] = { |
| 307 | KBL_DISABLED, |
| 308 | KBL_ENABLED |
| 309 | }; |
| 310 | |
| 311 | ec_write(ECRAM_KBL_STATE, |
| 312 | get_ec_value_from_option("kbl_state", |
| 313 | 1, |
| 314 | kbl_state, |
| 315 | ARRAY_SIZE(kbl_state))); |
Sean Rhodes | 296994b | 2021-10-14 20:58:15 +0100 | [diff] [blame] | 316 | } |
| 317 | |
| 318 | static struct device_operations ops = { |
| 319 | .init = merlin_init, |
| 320 | .read_resources = noop_read_resources, |
| 321 | .set_resources = noop_set_resources, |
| 322 | }; |
| 323 | |
| 324 | static struct pnp_info pnp_dev_info[] = { |
| 325 | /* Serial Port 1 (UART1) */ |
| 326 | { NULL, ITE_SP1, PNP_IO0 | PNP_IRQ0, 0x0ff8, }, |
| 327 | /* Serial Port 2 (UART2) */ |
| 328 | { NULL, ITE_SP2, PNP_IO0 | PNP_IRQ0, 0x0ff8, }, |
| 329 | /* System Wake-Up Control (SWUC) */ |
| 330 | { NULL, ITE_SWUC, PNP_IO0 | PNP_IRQ0, 0xfff0, }, |
| 331 | /* KBC / Mouse Interface */ |
| 332 | { NULL, ITE_SWUC, PNP_IRQ0, }, |
| 333 | /* KBC / Keyboard Interface */ |
| 334 | { NULL, ITE_KBCK, PNP_IO0 | PNP_IO1 | PNP_IRQ0, 0x07ff, 0x07ff, }, |
| 335 | /* Consumer IR (CIR) */ |
| 336 | { NULL, ITE_IR, PNP_IO0 | PNP_IRQ0, 0xfff8, }, |
| 337 | /* Shared Memory / Flash Interface (SMFI) */ |
| 338 | { NULL, ITE_SMFI, PNP_IO0 | PNP_IRQ0, 0xfff0, }, |
| 339 | /* RTC-like Timer (RCTC) */ |
| 340 | { NULL, ITE_RTCT, PNP_IO0 | PNP_IO1 | PNP_IO2 | PNP_IO3 | PNP_IRQ0, |
| 341 | 0xfffe, 0xfffe, 0xfffe, 0xfffe, }, |
| 342 | /* Power Management I/F Channel 1 (PMC1) */ |
| 343 | { NULL, ITE_PMC1, PNP_IO0 | PNP_IO1 | PNP_IRQ0, 0x07ff, 0x07ff, }, |
| 344 | /* Power Management I/F Channel 2 (PMC2) */ |
| 345 | { NULL, ITE_PMC2, PNP_IO0 | PNP_IO1 | PNP_IO2 | PNP_IRQ0, 0x07fc, |
| 346 | 0x07fc, 0xfff0, }, |
| 347 | /* Serial Peripheral Interface (SSPI) */ |
| 348 | { NULL, ITE_SSPI, PNP_IO0 | PNP_IRQ0, 0xfff8, }, |
| 349 | /* Platform Environment Control Interface (PECI) */ |
| 350 | { NULL, ITE_PECI, PNP_IRQ0, 0xfff8, }, |
| 351 | /* Power Management I/F Channel 3 (PMC3) */ |
| 352 | { NULL, ITE_PMC3, PNP_IO0 | PNP_IO1 | PNP_IRQ0, 0x07ff, 0x07ff, }, |
| 353 | /* Power Management I/F Channel 4 (PMC4) */ |
| 354 | { NULL, ITE_PMC4, PNP_IO0 | PNP_IO1 | PNP_IRQ0, 0x07ff, 0x07ff, }, |
| 355 | /* Power Management I/F Channel 5 (PMC5) */ |
| 356 | { NULL, ITE_PMC5, PNP_IO0 | PNP_IO1 | PNP_IRQ0, 0x07ff, 0x07ff, }, |
| 357 | }; |
| 358 | |
| 359 | static void enable_dev(struct device *dev) |
| 360 | { |
| 361 | pnp_enable_devices(dev, &ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info); |
| 362 | } |
| 363 | |
| 364 | struct chip_operations ec_starlabs_merlin_ops = { |
| 365 | CHIP_NAME("ITE EC") |
| 366 | .enable_dev = enable_dev |
| 367 | }; |