src/southbridge/intel/i82801dx/ide.c

/* SPDX-License-Identifier: GPL-2.0-only */

#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include "chip.h"
#include "i82801dx.h"

typedef struct southbridge_intel_i82801dx_config config_t;

static void ide_init(struct device *dev)
{
	/* Get the chip configuration */
	config_t *config = dev->chip_info;

	/* Enable IDE devices so the Linux IDE driver will work. */
	uint16_t ideTimingConfig;

	ideTimingConfig = pci_read_config16(dev, IDE_TIM_PRI);
	ideTimingConfig &= ~IDE_DECODE_ENABLE;
	if (!config || config->ide0_enable) {
		/* Enable primary IDE interface. */
		ideTimingConfig |= IDE_DECODE_ENABLE;
		printk(BIOS_DEBUG, "IDE0: Primary IDE interface is enabled\n");
	} else {
		printk(BIOS_INFO, "IDE0: Primary IDE interface is disabled\n");
	}
	pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig);

	ideTimingConfig = pci_read_config16(dev, IDE_TIM_SEC);
	ideTimingConfig &= ~IDE_DECODE_ENABLE;
	if (!config || config->ide1_enable) {
		/* Enable secondary IDE interface. */
		ideTimingConfig |= IDE_DECODE_ENABLE;
		printk(BIOS_DEBUG, "IDE1: Secondary IDE interface is enabled\n");
	} else {
		printk(BIOS_INFO, "IDE1: Secondary IDE interface is disabled\n");
	}
	pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig);
}

static struct device_operations ide_ops = {
	.read_resources = pci_dev_read_resources,
	.set_resources = pci_dev_set_resources,
	.enable_resources = pci_dev_enable_resources,
	.init = ide_init,
	.enable = i82801dx_enable,
};

/* 82801DB */
static const struct pci_driver i82801db_ide __pci_driver = {
	.ops = &ide_ops,
	.vendor = PCI_VID_INTEL,
	.device = 0x24cb,
};

/* 82801DBM */
static const struct pci_driver i82801dbm_ide __pci_driver = {
	.ops = &ide_ops,
	.vendor = PCI_VID_INTEL,
	.device = 0x24ca,
};