Stefan Reinauer | 6651da3 | 2012-04-27 23:16:30 +0200 | [diff] [blame] | 1 | chip northbridge/intel/sandybridge |
Vladimir Serbinenko | dd2bc3f | 2014-10-31 09:16:31 +0100 | [diff] [blame] | 2 | # IGD Displays |
Nico Huber | b0b25c8 | 2020-03-21 20:35:12 +0100 | [diff] [blame] | 3 | register "gfx" = "GMA_STATIC_DISPLAYS(0)" |
Stefan Reinauer | 6651da3 | 2012-04-27 23:16:30 +0200 | [diff] [blame] | 4 | |
| 5 | # Enable DisplayPort 1 Hotplug with 6ms pulse |
| 6 | register "gpu_dp_d_hotplug" = "0x06" |
| 7 | |
| 8 | # Enable DisplayPort 0 Hotplug with 6ms pulse |
| 9 | register "gpu_dp_c_hotplug" = "0x06" |
| 10 | |
| 11 | # Enable DVI Hotplug with 6ms pulse |
| 12 | register "gpu_dp_b_hotplug" = "0x06" |
| 13 | |
Keith Hui | 7039edd | 2023-07-21 10:12:05 -0400 | [diff] [blame] | 14 | register "max_mem_clock_mhz" = "800" |
Keith Hui | 45e4ab4 | 2023-07-22 12:49:05 -0400 | [diff] [blame] | 15 | register "spd_addresses" = "{0x50, 0, 0x52, 0}" |
Keith Hui | 7039edd | 2023-07-21 10:12:05 -0400 | [diff] [blame] | 16 | |
| 17 | register "usb_port_config" = "{ |
| 18 | { 1, 0, 0x0040 }, |
| 19 | { 1, 1, 0x0040 }, |
| 20 | { 1, 0, 0x0040 }, |
| 21 | { 1, 0, 0x0040 }, |
| 22 | { 1, 2, 0x0040 }, |
| 23 | { 0, 0, 0x0000 }, |
| 24 | { 0, 0, 0x0000 }, |
| 25 | { 0, 0, 0x0000 }, |
| 26 | { 1, 4, 0x0040 }, |
| 27 | { 1, 4, 0x0040 }, |
| 28 | { 1, 4, 0x0040 }, |
| 29 | { 0, 4, 0x0000 }, |
| 30 | { 1, 6, 0x0040 }, |
| 31 | { 1, 5, 0x0040 }, }" |
Stefan Reinauer | 6651da3 | 2012-04-27 23:16:30 +0200 | [diff] [blame] | 32 | |
Arthur Heymans | cdb26fd | 2021-11-15 20:12:02 +0100 | [diff] [blame] | 33 | chip cpu/intel/model_206ax |
| 34 | device cpu_cluster 0 on end |
| 35 | |
| 36 | register "acpi_c1" = "CPU_ACPI_C3" |
| 37 | register "acpi_c2" = "CPU_ACPI_C6" |
Stefan Reinauer | 6651da3 | 2012-04-27 23:16:30 +0200 | [diff] [blame] | 38 | end |
| 39 | |
Stefan Reinauer | 4aff445 | 2013-02-12 14:17:15 -0800 | [diff] [blame] | 40 | device domain 0 on |
Arthur Heymans | b5df65a | 2022-11-12 14:51:49 +0100 | [diff] [blame] | 41 | device ref host_bridge on end # host bridge |
| 42 | device ref igd on end # vga controller |
Stefan Reinauer | 6651da3 | 2012-04-27 23:16:30 +0200 | [diff] [blame] | 43 | |
Angel Pons | 8b45399 | 2020-01-01 21:47:52 +0100 | [diff] [blame] | 44 | chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH |
Stefan Reinauer | 6651da3 | 2012-04-27 23:16:30 +0200 | [diff] [blame] | 45 | # GPI routing |
| 46 | # 0 No effect (default) |
| 47 | # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) |
| 48 | # 2 SCI (if corresponding GPIO_EN bit is also set) |
Angel Pons | 8b45399 | 2020-01-01 21:47:52 +0100 | [diff] [blame] | 49 | register "gpi1_routing" = "1" |
Stefan Reinauer | 6651da3 | 2012-04-27 23:16:30 +0200 | [diff] [blame] | 50 | register "gpi14_routing" = "2" |
Gabe Black | 5fe7a20 | 2012-03-29 17:58:52 -0700 | [diff] [blame] | 51 | register "alt_gp_smi_en" = "0x0002" |
| 52 | register "gpe0_en" = "0x4000" |
Stefan Reinauer | 6651da3 | 2012-04-27 23:16:30 +0200 | [diff] [blame] | 53 | |
Stefan Reinauer | 6651da3 | 2012-04-27 23:16:30 +0200 | [diff] [blame] | 54 | register "sata_port_map" = "0x3f" |
| 55 | |
Arthur Heymans | 6beaef9 | 2019-06-16 23:29:23 +0200 | [diff] [blame] | 56 | register "gen1_dec" = "0x00fc1601" |
| 57 | # runtime_port registers |
| 58 | register "gen2_dec" = "0x000c0181" |
Stefan Reinauer | 6651da3 | 2012-04-27 23:16:30 +0200 | [diff] [blame] | 59 | # SuperIO range is 0x700-0x73f |
Arthur Heymans | 6beaef9 | 2019-06-16 23:29:23 +0200 | [diff] [blame] | 60 | register "gen3_dec" = "0x003c0701" |
Keith Hui | 51a57eb | 2024-02-05 16:44:38 -0500 | [diff] [blame^] | 61 | register "usb_port_config" = "{ |
| 62 | { 1, 0, 0 }, /* P0: Front port (OC0) */ |
| 63 | { 1, 0, 1 }, /* P1: Back port (OC1) */ |
| 64 | { 1, 0, -1 }, /* P2: MINIPCIE1 (no OC) */ |
| 65 | { 1, 0, -1 }, /* P3: MMC (no OC) */ |
| 66 | { 1, 0, 2 }, /* P4: Front port (OC2) */ |
| 67 | { 0, 0, -1 }, /* P5: Empty */ |
| 68 | { 0, 0, -1 }, /* P6: Empty */ |
| 69 | { 0, 0, -1 }, /* P7: Empty */ |
| 70 | { 1, 0, 4 }, /* P8: Back port (OC4) */ |
| 71 | { 1, 0, -1 }, /* P9: MINIPCIE3 (no OC) */ |
| 72 | { 1, 0, -1 }, /* P10: BLUETOOTH (no OC) */ |
| 73 | { 0, 0, -1 }, /* P11: Empty */ |
| 74 | { 1, 0, 6 }, /* P12: Back port (OC6) */ |
| 75 | { 1, 0, 5 }, /* P13: Back port (OC5) */ |
| 76 | }" |
Stefan Reinauer | 6651da3 | 2012-04-27 23:16:30 +0200 | [diff] [blame] | 77 | |
Arthur Heymans | b5df65a | 2022-11-12 14:51:49 +0100 | [diff] [blame] | 78 | device ref mei1 on end # Management Engine Interface 1 |
| 79 | device ref mei2 off end # Management Engine Interface 2 |
| 80 | device ref me_ide_r off end # Management Engine IDE-R |
| 81 | device ref me_kt off end # Management Engine KT |
| 82 | device ref gbe off end # Intel Gigabit Ethernet |
| 83 | device ref ehci2 on end # USB2 EHCI #2 |
| 84 | device ref hda on end # High Definition Audio |
| 85 | device ref pcie_rp1 on end # PCIe Port #1 (WLAN) |
| 86 | device ref pcie_rp2 off end # PCIe Port #2 |
| 87 | device ref pcie_rp3 on end # PCIe Port #3 (Debug) |
| 88 | device ref pcie_rp4 on end # PCIe Port #4 (LAN) |
| 89 | device ref pcie_rp5 off end # PCIe Port #5 |
| 90 | device ref pcie_rp6 off end # PCIe Port #6 |
| 91 | device ref pcie_rp7 off end # PCIe Port #7 |
| 92 | device ref pcie_rp8 off end # PCIe Port #8 |
| 93 | device ref ehci1 on end # USB2 EHCI #1 |
| 94 | device ref pci_bridge off end # PCI bridge |
| 95 | device ref lpc on end # LPC bridge |
| 96 | device ref sata1 on end # SATA Controller 1 |
| 97 | device ref smbus on end # SMBus |
| 98 | device ref sata2 off end # SATA Controller 2 |
| 99 | device ref thermal on end # Thermal |
Stefan Reinauer | 6651da3 | 2012-04-27 23:16:30 +0200 | [diff] [blame] | 100 | end |
| 101 | end |
| 102 | end |