Patrick Georgi | 0588d19 | 2009-08-12 15:00:51 +0000 | [diff] [blame] | 1 | chip northbridge/amd/lx |
Stefan Reinauer | 4aff445 | 2013-02-12 14:17:15 -0800 | [diff] [blame^] | 2 | device domain 0 on |
Patrick Georgi | 0588d19 | 2009-08-12 15:00:51 +0000 | [diff] [blame] | 3 | device pci 1.0 on end |
| 4 | device pci 1.1 on end |
| 5 | chip southbridge/amd/cs5536 |
| 6 | # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK |
| 7 | # SIRQ Mode = Active(Quiet) mode. Save power.... |
| 8 | # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK |
| 9 | # How to get these? Boot linux and do this: |
| 10 | # rdmsr 0x51400025 |
| 11 | register "lpc_serirq_enable" = "0x0000105a" |
| 12 | # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits |
| 13 | register "lpc_serirq_polarity" = "0x0000EFA5" |
| 14 | # mode is high 10 bits (determined from code) |
| 15 | register "lpc_serirq_mode" = "1" |
| 16 | # Don't yet know how to find this. |
| 17 | register "enable_gpio_int_route" = "0x0D0C0700" |
| 18 | register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash |
| 19 | register "enable_USBP4_device" = "0" #0: host, 1:device |
| 20 | register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) |
| 21 | register "com1_enable" = "0" |
| 22 | register "com1_address" = "0x3F8" |
| 23 | register "com1_irq" = "4" |
| 24 | register "com2_enable" = "0" |
| 25 | register "com2_address" = "0x2F8" |
| 26 | register "com2_irq" = "3" |
| 27 | register "unwanted_vpci[0]" = "0" # End of list has a zero |
| 28 | device pci f.0 on # ISA Bridge |
| 29 | chip superio/winbond/w83627hf |
| 30 | device pnp 2e.0 off # Floppy |
| 31 | io 0x60 = 0x3f0 |
| 32 | irq 0x70 = 6 |
| 33 | drq 0x74 = 2 |
| 34 | end |
| 35 | device pnp 2e.1 on # Parallel Port |
| 36 | io 0x60 = 0x378 |
| 37 | irq 0x70 = 7 |
| 38 | end |
| 39 | device pnp 2e.2 on # Com1 |
| 40 | io 0x60 = 0x3f8 |
| 41 | irq 0x70 = 4 |
| 42 | end |
| 43 | device pnp 2e.3 on # Com2 |
| 44 | io 0x60 = 0x2f8 |
| 45 | irq 0x70 = 3 |
| 46 | end |
| 47 | device pnp 2e.5 on # Keyboard |
| 48 | io 0x60 = 0x60 |
| 49 | io 0x62 = 0x64 |
| 50 | irq 0x70 = 1 |
| 51 | irq 0x72 = 12 |
| 52 | end |
| 53 | device pnp 2e.6 off # CIR |
| 54 | io 0x60 = 0x100 |
| 55 | end |
| 56 | device pnp 2e.7 off # GAME_MIDI_GIPO1 |
| 57 | io 0x60 = 0x220 |
| 58 | io 0x62 = 0x300 |
| 59 | irq 0x70 = 9 |
Stefan Reinauer | 14e2277 | 2010-04-27 06:56:47 +0000 | [diff] [blame] | 60 | end |
Patrick Georgi | 0588d19 | 2009-08-12 15:00:51 +0000 | [diff] [blame] | 61 | device pnp 2e.8 on end # GPIO2 |
| 62 | device pnp 2e.9 on end # GPIO3 |
| 63 | device pnp 2e.a on end # ACPI |
| 64 | device pnp 2e.b on # HW Monitor |
| 65 | io 0x60 = 0x290 |
| 66 | irq 0x70 = 5 |
| 67 | end |
| 68 | end |
| 69 | end |
| 70 | device pci f.1 on end # Flash controller |
| 71 | device pci f.2 on end # IDE controller |
| 72 | device pci f.3 on end # Audio |
| 73 | device pci f.4 on end # OHCI |
| 74 | device pci f.5 on end # EHCI |
| 75 | end |
| 76 | end |
| 77 | |
| 78 | # APIC cluster is late CPU init. |
Patrick Georgi | 8d31368 | 2010-05-05 13:12:42 +0000 | [diff] [blame] | 79 | device lapic_cluster 0 on |
Kyösti Mälkki | 7916f4c | 2012-02-09 16:07:41 +0200 | [diff] [blame] | 80 | chip cpu/amd/geode_lx |
Patrick Georgi | 8d31368 | 2010-05-05 13:12:42 +0000 | [diff] [blame] | 81 | device lapic 0 on end |
Patrick Georgi | 0588d19 | 2009-08-12 15:00:51 +0000 | [diff] [blame] | 82 | end |
| 83 | end |
| 84 | |
| 85 | end |
| 86 | |