Jens Rottmann | 36224b4 | 2010-09-10 21:51:34 +0000 | [diff] [blame^] | 1 | chip northbridge/amd/lx |
| 2 | device pci_domain 0 on |
| 3 | device pci 1.0 on end # Northbridge |
| 4 | device pci 1.1 on end # Graphics |
| 5 | device pci 1.2 on end # AES |
| 6 | chip southbridge/amd/cs5536 |
| 7 | # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK |
| 8 | # SIRQ Mode = Active(Quiet) mode. Save power.... |
| 9 | # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, |
| 10 | # UARTs, etc IRQs. OK |
| 11 | register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 |
| 12 | register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above |
| 13 | register "lpc_serirq_mode" = "1" |
| 14 | register "enable_gpio_int_route" = "0x0D0C0700" |
| 15 | register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash |
| 16 | register "enable_USBP4_device" = "0" # 0:host, 1:device |
| 17 | register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) |
| 18 | register "com1_enable" = "0" |
| 19 | register "com1_address" = "0x3E8" |
| 20 | register "com1_irq" = "6" |
| 21 | register "com2_enable" = "0" |
| 22 | register "com2_address" = "0x2E8" |
| 23 | register "com2_irq" = "6" |
| 24 | register "unwanted_vpci[0]" = "0" # End of list has a zero |
| 25 | device pci 8.0 on end # Slot4 |
| 26 | device pci 9.0 on end # Slot3 |
| 27 | device pci a.0 on end # Slot2 |
| 28 | device pci b.0 on end # Slot1 |
| 29 | device pci c.0 on end # IT8888 |
| 30 | device pci d.0 on end # Mini-PCI |
| 31 | device pci e.0 on end # Ethernet |
| 32 | device pci f.0 on # ISA Bridge |
| 33 | chip superio/ite/it8712f |
| 34 | device pnp 2e.0 on # Floppy |
| 35 | io 0x60 = 0x3f0 |
| 36 | irq 0x70 = 6 |
| 37 | drq 0x74 = 2 |
| 38 | end |
| 39 | device pnp 2e.1 on # Com1 |
| 40 | io 0x60 = 0x3f8 |
| 41 | irq 0x70 = 4 |
| 42 | end |
| 43 | device pnp 2e.2 on # Com2 |
| 44 | io 0x60 = 0x2f8 |
| 45 | irq 0x70 = 3 |
| 46 | end |
| 47 | device pnp 2e.3 on # Parallel port |
| 48 | io 0x60 = 0x378 |
| 49 | irq 0x70 = 7 |
| 50 | end |
| 51 | device pnp 2e.4 on # EC |
| 52 | io 0x60 = 0x290 # EC |
| 53 | io 0x62 = 0x298 # PME |
| 54 | irq 0x70 = 9 |
| 55 | end |
| 56 | device pnp 2e.5 on # PS/2 keyboard |
| 57 | io 0x60 = 0x60 |
| 58 | io 0x62 = 0x64 |
| 59 | irq 0x70 = 1 |
| 60 | end |
| 61 | device pnp 2e.6 on # PS/2 mouse |
| 62 | irq 0x70 = 12 |
| 63 | end |
| 64 | device pnp 2e.7 on # GPIO |
| 65 | io 0x62 = 0x1220 # Simple I/O |
| 66 | io 0x64 = 0x1228 # SPI |
| 67 | end |
| 68 | device pnp 2e.8 off # MIDI |
| 69 | io 0x60 = 0x300 |
| 70 | irq 0x70 = 9 |
| 71 | end |
| 72 | device pnp 2e.9 off # Game port |
| 73 | io 0x60 = 0x220 |
| 74 | end |
| 75 | device pnp 2e.a off end # CIR |
| 76 | end |
| 77 | end |
| 78 | device pci f.2 on end # IDE |
| 79 | device pci f.3 on end # Audio |
| 80 | device pci f.4 on end # OHCI |
| 81 | device pci f.5 on end # EHCI |
| 82 | end |
| 83 | end |
| 84 | # APIC cluster is late CPU init. |
| 85 | device lapic_cluster 0 on |
| 86 | chip cpu/amd/model_lx |
| 87 | device lapic 0 on end |
| 88 | end |
| 89 | end |
| 90 | end |