Angel Pons | 182dbde | 2020-04-02 23:49:05 +0200 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0-only */ |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 2 | |
| 3 | #include <console/console.h> |
| 4 | #include <device/device.h> |
| 5 | #include <device/pci.h> |
| 6 | #include <device/pci_ids.h> |
Kyösti Mälkki | cbf9571 | 2020-01-05 08:05:45 +0200 | [diff] [blame] | 7 | #include <option.h> |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 8 | #include <pc80/mc146818rtc.h> |
| 9 | #include <pc80/isa-dma.h> |
| 10 | #include <pc80/i8259.h> |
| 11 | #include <arch/io.h> |
Kyösti Mälkki | f1b58b7 | 2019-03-01 13:43:02 +0200 | [diff] [blame] | 12 | #include <device/pci_ops.h> |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 13 | #include <arch/ioapic.h> |
Furquan Shaikh | 76cedd2 | 2020-05-02 10:24:23 -0700 | [diff] [blame] | 14 | #include <acpi/acpi.h> |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 15 | #include <cpu/x86/smm.h> |
Arthur Heymans | 98c9257 | 2022-11-07 11:39:58 +0100 | [diff] [blame] | 16 | #include <cpu/intel/speedstep.h> |
Furquan Shaikh | 76cedd2 | 2020-05-02 10:24:23 -0700 | [diff] [blame] | 17 | #include <acpi/acpigen.h> |
Arthur Heymans | ad50149 | 2017-04-12 00:15:39 +0200 | [diff] [blame] | 18 | #include <arch/smp/mpspec.h> |
Kyösti Mälkki | 12b121c | 2019-08-18 16:33:39 +0300 | [diff] [blame] | 19 | #include "chip.h" |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 20 | #include "i82801jx.h" |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 21 | #include <southbridge/intel/common/pciehp.h> |
Angel Pons | 490473e | 2020-06-21 17:10:28 +0200 | [diff] [blame] | 22 | #include <southbridge/intel/common/pmutil.h> |
Arthur Heymans | a8a9f34 | 2017-12-24 08:11:13 +0100 | [diff] [blame] | 23 | #include <southbridge/intel/common/acpi_pirq_gen.h> |
Tim Wawrzynczak | f62c494 | 2021-02-26 10:30:52 -0700 | [diff] [blame] | 24 | #include <southbridge/intel/common/rcba_pirq.h> |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 25 | |
| 26 | #define NMI_OFF 0 |
| 27 | |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 28 | typedef struct southbridge_intel_i82801jx_config config_t; |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 29 | |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 30 | static void i82801jx_enable_apic(struct device *dev) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 31 | { |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 32 | /* Enable IOAPIC. Keep APIC Range Select at zero. */ |
| 33 | RCBA8(0x31ff) = 0x03; |
| 34 | /* We have to read 0x31ff back if bit0 changed. */ |
| 35 | RCBA8(0x31ff); |
| 36 | |
| 37 | /* Lock maximum redirection entries (MRE), R/WO register. */ |
Felix Held | 0d19289 | 2024-02-06 16:55:29 +0100 | [diff] [blame] | 38 | ioapic_lock_max_vectors(IO_APIC_ADDR); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 39 | |
Felix Held | 0d19289 | 2024-02-06 16:55:29 +0100 | [diff] [blame] | 40 | register_new_ioapic_gsi0(IO_APIC_ADDR); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 41 | } |
| 42 | |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 43 | static void i82801jx_enable_serial_irqs(struct device *dev) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 44 | { |
| 45 | /* Set packet length and toggle silent mode bit for one frame. */ |
| 46 | pci_write_config8(dev, D31F0_SERIRQ_CNTL, |
| 47 | (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0)); |
| 48 | } |
| 49 | |
| 50 | /* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control |
| 51 | * 0x00 - 0000 = Reserved |
| 52 | * 0x01 - 0001 = Reserved |
| 53 | * 0x02 - 0010 = Reserved |
| 54 | * 0x03 - 0011 = IRQ3 |
| 55 | * 0x04 - 0100 = IRQ4 |
| 56 | * 0x05 - 0101 = IRQ5 |
| 57 | * 0x06 - 0110 = IRQ6 |
| 58 | * 0x07 - 0111 = IRQ7 |
| 59 | * 0x08 - 1000 = Reserved |
| 60 | * 0x09 - 1001 = IRQ9 |
| 61 | * 0x0A - 1010 = IRQ10 |
| 62 | * 0x0B - 1011 = IRQ11 |
| 63 | * 0x0C - 1100 = IRQ12 |
| 64 | * 0x0D - 1101 = Reserved |
| 65 | * 0x0E - 1110 = IRQ14 |
| 66 | * 0x0F - 1111 = IRQ15 |
| 67 | * PIRQ[n]_ROUT[7] - PIRQ Routing Control |
| 68 | * 0x80 - The PIRQ is not routed. |
| 69 | */ |
| 70 | |
Elyes HAOUAS | 1a8c1df | 2018-05-13 13:36:44 +0200 | [diff] [blame] | 71 | static void i82801jx_pirq_init(struct device *dev) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 72 | { |
Elyes HAOUAS | 1a8c1df | 2018-05-13 13:36:44 +0200 | [diff] [blame] | 73 | struct device *irq_dev; |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 74 | |
Arthur Heymans | 87af36a | 2017-04-12 10:53:30 +0200 | [diff] [blame] | 75 | /* Interrupt 11 is not used by legacy devices and so can always be used |
| 76 | * for PCI interrupts. Full legacy IRQ routing is complicated and hard |
| 77 | * to get right. Fortunately all modern OS use MSI and so it's not that |
| 78 | * big of an issue anyway. Still we have to provide a reasonable |
| 79 | * default. Using interrupt 11 for it everywhere is a working default. |
| 80 | * ACPI-aware OS can move it to any interrupt and others will just leave |
| 81 | * them at default. |
| 82 | */ |
| 83 | const u8 pirq_routing = 11; |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 84 | |
Arthur Heymans | 87af36a | 2017-04-12 10:53:30 +0200 | [diff] [blame] | 85 | pci_write_config8(dev, D31F0_PIRQA_ROUT, pirq_routing); |
| 86 | pci_write_config8(dev, D31F0_PIRQB_ROUT, pirq_routing); |
| 87 | pci_write_config8(dev, D31F0_PIRQC_ROUT, pirq_routing); |
| 88 | pci_write_config8(dev, D31F0_PIRQD_ROUT, pirq_routing); |
| 89 | |
| 90 | pci_write_config8(dev, D31F0_PIRQE_ROUT, pirq_routing); |
| 91 | pci_write_config8(dev, D31F0_PIRQF_ROUT, pirq_routing); |
| 92 | pci_write_config8(dev, D31F0_PIRQG_ROUT, pirq_routing); |
| 93 | pci_write_config8(dev, D31F0_PIRQH_ROUT, pirq_routing); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 94 | |
| 95 | /* Eric Biederman once said we should let the OS do this. |
| 96 | * I am not so sure anymore he was right. |
| 97 | */ |
| 98 | |
| 99 | for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { |
Arthur Heymans | 87af36a | 2017-04-12 10:53:30 +0200 | [diff] [blame] | 100 | u8 int_pin = 0; |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 101 | |
Fabio Aiuto | d835da9 | 2022-09-30 11:25:28 +0200 | [diff] [blame] | 102 | if (!is_enabled_pci(irq_dev)) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 103 | continue; |
| 104 | |
| 105 | int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); |
| 106 | |
Arthur Heymans | 87af36a | 2017-04-12 10:53:30 +0200 | [diff] [blame] | 107 | if (int_pin == 0) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 108 | continue; |
| 109 | |
Arthur Heymans | 87af36a | 2017-04-12 10:53:30 +0200 | [diff] [blame] | 110 | pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, pirq_routing); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 111 | } |
| 112 | } |
| 113 | |
Elyes HAOUAS | 1a8c1df | 2018-05-13 13:36:44 +0200 | [diff] [blame] | 114 | static void i82801jx_gpi_routing(struct device *dev) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 115 | { |
| 116 | /* Get the chip configuration */ |
| 117 | config_t *config = dev->chip_info; |
| 118 | u32 reg32 = 0; |
| 119 | |
| 120 | /* An array would be much nicer here, or some |
| 121 | * other method of doing this. |
| 122 | */ |
| 123 | reg32 |= (config->gpi0_routing & 0x03) << 0; |
| 124 | reg32 |= (config->gpi1_routing & 0x03) << 2; |
| 125 | reg32 |= (config->gpi2_routing & 0x03) << 4; |
| 126 | reg32 |= (config->gpi3_routing & 0x03) << 6; |
| 127 | reg32 |= (config->gpi4_routing & 0x03) << 8; |
| 128 | reg32 |= (config->gpi5_routing & 0x03) << 10; |
| 129 | reg32 |= (config->gpi6_routing & 0x03) << 12; |
| 130 | reg32 |= (config->gpi7_routing & 0x03) << 14; |
| 131 | reg32 |= (config->gpi8_routing & 0x03) << 16; |
| 132 | reg32 |= (config->gpi9_routing & 0x03) << 18; |
| 133 | reg32 |= (config->gpi10_routing & 0x03) << 20; |
| 134 | reg32 |= (config->gpi11_routing & 0x03) << 22; |
| 135 | reg32 |= (config->gpi12_routing & 0x03) << 24; |
| 136 | reg32 |= (config->gpi13_routing & 0x03) << 26; |
| 137 | reg32 |= (config->gpi14_routing & 0x03) << 28; |
| 138 | reg32 |= (config->gpi15_routing & 0x03) << 30; |
| 139 | |
| 140 | pci_write_config32(dev, D31F0_GPIO_ROUT, reg32); |
| 141 | } |
| 142 | |
Arthur Heymans | 98c9257 | 2022-11-07 11:39:58 +0100 | [diff] [blame] | 143 | bool southbridge_support_c5(void) |
| 144 | { |
| 145 | struct device *lpc_dev = __pci_0_1f_0; |
| 146 | struct southbridge_intel_i82801jx_config *config = lpc_dev->chip_info; |
Elyes Haouas | a7f55af | 2023-09-09 10:18:03 +0200 | [diff] [blame] | 147 | return config->c5_enable; |
Arthur Heymans | 98c9257 | 2022-11-07 11:39:58 +0100 | [diff] [blame] | 148 | } |
| 149 | |
| 150 | bool southbridge_support_c6(void) |
| 151 | { |
| 152 | struct device *lpc_dev = __pci_0_1f_0; |
| 153 | struct southbridge_intel_i82801jx_config *config = lpc_dev->chip_info; |
Elyes Haouas | a7f55af | 2023-09-09 10:18:03 +0200 | [diff] [blame] | 154 | return config->c6_enable; |
Arthur Heymans | 98c9257 | 2022-11-07 11:39:58 +0100 | [diff] [blame] | 155 | } |
| 156 | |
Elyes HAOUAS | 1a8c1df | 2018-05-13 13:36:44 +0200 | [diff] [blame] | 157 | static void i82801jx_power_options(struct device *dev) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 158 | { |
| 159 | u8 reg8; |
| 160 | u16 reg16, pmbase; |
| 161 | u32 reg32; |
| 162 | const char *state; |
| 163 | /* Get the chip configuration */ |
| 164 | config_t *config = dev->chip_info; |
| 165 | |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 166 | /* BIOS must program... */ |
Angel Pons | 2048cb4 | 2020-06-08 02:09:33 +0200 | [diff] [blame] | 167 | pci_or_config32(dev, 0xac, (1 << 30) | (3 << 8)); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 168 | |
| 169 | /* Which state do we want to goto after g3 (power restored)? |
| 170 | * 0 == S0 Full On |
| 171 | * 1 == S5 Soft Off |
| 172 | * |
| 173 | * If the option is not existent (Laptops), use MAINBOARD_POWER_ON. |
| 174 | */ |
Angel Pons | 88dcb31 | 2021-04-26 17:10:28 +0200 | [diff] [blame] | 175 | const unsigned int pwr_on = get_uint_option("power_on_after_fail", MAINBOARD_POWER_ON); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 176 | |
| 177 | reg8 = pci_read_config8(dev, D31F0_GEN_PMCON_3); |
| 178 | reg8 &= 0xfe; |
| 179 | switch (pwr_on) { |
| 180 | case MAINBOARD_POWER_OFF: |
| 181 | reg8 |= 1; |
| 182 | state = "off"; |
| 183 | break; |
| 184 | case MAINBOARD_POWER_ON: |
| 185 | reg8 &= ~1; |
| 186 | state = "on"; |
| 187 | break; |
| 188 | case MAINBOARD_POWER_KEEP: |
| 189 | reg8 &= ~1; |
| 190 | state = "state keep"; |
| 191 | break; |
| 192 | default: |
| 193 | state = "undefined"; |
| 194 | } |
| 195 | |
| 196 | reg8 |= (3 << 4); /* avoid #S4 assertions */ |
Elyes HAOUAS | dc41371 | 2021-02-07 20:54:53 +0100 | [diff] [blame] | 197 | reg8 &= ~(1 << 3); /* minimum assertion is 1 to 2 RTCCLK */ |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 198 | |
| 199 | pci_write_config8(dev, D31F0_GEN_PMCON_3, reg8); |
| 200 | printk(BIOS_INFO, "Set power %s after power failure.\n", state); |
| 201 | |
| 202 | /* Set up NMI on errors. */ |
| 203 | reg8 = inb(0x61); |
| 204 | reg8 &= 0x0f; /* Higher Nibble must be 0 */ |
| 205 | reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */ |
| 206 | // reg8 &= ~(1 << 2); /* PCI SERR# Enable */ |
| 207 | reg8 |= (1 << 2); /* PCI SERR# Disable for now */ |
| 208 | outb(reg8, 0x61); |
| 209 | |
| 210 | reg8 = inb(0x74); /* Read from 0x74 as 0x70 is write only. */ |
Angel Pons | 88dcb31 | 2021-04-26 17:10:28 +0200 | [diff] [blame] | 211 | const unsigned int nmi_option = get_uint_option("nmi", NMI_OFF); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 212 | if (nmi_option) { |
| 213 | printk(BIOS_INFO, "NMI sources enabled.\n"); |
| 214 | reg8 &= ~(1 << 7); /* Set NMI. */ |
| 215 | } else { |
| 216 | printk(BIOS_INFO, "NMI sources disabled.\n"); |
Elyes HAOUAS | 9c5d463 | 2018-04-26 22:21:21 +0200 | [diff] [blame] | 217 | reg8 |= (1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 218 | } |
| 219 | outb(reg8, 0x70); |
| 220 | |
| 221 | /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */ |
| 222 | reg16 = pci_read_config16(dev, D31F0_GEN_PMCON_1); |
| 223 | reg16 &= ~(3 << 0); // SMI# rate 1 minute |
| 224 | reg16 |= (1 << 2); // CLKRUN_EN - Mobile/Ultra only |
| 225 | reg16 |= (1 << 3); // Speedstep Enable - Mobile/Ultra only |
| 226 | reg16 |= (1 << 5); // CPUSLP_EN Desktop only |
| 227 | |
| 228 | if (config->c4onc3_enable) |
| 229 | reg16 |= (1 << 7); |
| 230 | |
| 231 | // another laptop wants this? |
| 232 | // reg16 &= ~(1 << 10); // BIOS_PCI_EXP_EN - Desktop/Mobile only |
| 233 | reg16 |= (1 << 10); // BIOS_PCI_EXP_EN - Desktop/Mobile only |
Kyösti Mälkki | 9446447 | 2020-06-13 13:45:42 +0300 | [diff] [blame] | 234 | if (CONFIG(DEBUG_PERIODIC_SMI)) |
| 235 | reg16 |= (3 << 0); // Periodic SMI every 8s |
Arthur Heymans | 98c9257 | 2022-11-07 11:39:58 +0100 | [diff] [blame] | 236 | if (southbridge_support_c5()) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 237 | reg16 |= (1 << 11); /* Enable C5, C6 and PMSYNC# */ |
| 238 | pci_write_config16(dev, D31F0_GEN_PMCON_1, reg16); |
| 239 | |
| 240 | /* Set exit timings for C5/C6. */ |
Arthur Heymans | 98c9257 | 2022-11-07 11:39:58 +0100 | [diff] [blame] | 241 | if (southbridge_support_c5()) { |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 242 | reg8 = pci_read_config8(dev, D31F0_C5_EXIT_TIMING); |
| 243 | reg8 &= ~((7 << 3) | (7 << 0)); |
Arthur Heymans | 98c9257 | 2022-11-07 11:39:58 +0100 | [diff] [blame] | 244 | if (southbridge_support_c6()) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 245 | reg8 |= (5 << 3) | (3 << 0); /* 38-44us PMSYNC# to STPCLK#, |
| 246 | 95-102us DPRSTP# to STP_CPU# */ |
| 247 | else |
| 248 | reg8 |= (0 << 3) | (1 << 0); /* 16-17us PMSYNC# to STPCLK#, |
| 249 | 34-40us DPRSTP# to STP_CPU# */ |
| 250 | pci_write_config8(dev, D31F0_C5_EXIT_TIMING, reg8); |
| 251 | } |
| 252 | |
| 253 | // Set the board's GPI routing. |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 254 | i82801jx_gpi_routing(dev); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 255 | |
| 256 | pmbase = pci_read_config16(dev, 0x40) & 0xfffe; |
| 257 | |
| 258 | outl(config->gpe0_en, pmbase + 0x28); |
| 259 | outw(config->alt_gp_smi_en, pmbase + 0x38); |
| 260 | |
| 261 | /* Set up power management block and determine sleep mode */ |
| 262 | reg16 = inw(pmbase + 0x00); /* PM1_STS */ |
| 263 | outw(reg16, pmbase + 0x00); /* Clear status bits. At least bit11 (power |
| 264 | button override) must be cleared or SCI |
| 265 | will be constantly fired and OSPM must |
| 266 | not know about it (ACPI spec says to |
| 267 | ignore the bit). */ |
| 268 | reg32 = inl(pmbase + 0x04); // PM1_CNT |
| 269 | reg32 &= ~(7 << 10); // SLP_TYP |
| 270 | outl(reg32, pmbase + 0x04); |
| 271 | |
| 272 | /* Set duty cycle for hardware throttling (defaults to 0x0: 50%). */ |
| 273 | reg32 = inl(pmbase + 0x10); |
| 274 | reg32 &= ~(7 << 5); |
| 275 | reg32 |= (config->throttle_duty & 7) << 5; |
| 276 | outl(reg32, pmbase + 0x10); |
| 277 | } |
| 278 | |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 279 | static void i82801jx_rtc_init(struct device *dev) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 280 | { |
| 281 | u8 reg8; |
| 282 | int rtc_failed; |
| 283 | |
| 284 | reg8 = pci_read_config8(dev, D31F0_GEN_PMCON_3); |
| 285 | rtc_failed = reg8 & RTC_BATTERY_DEAD; |
| 286 | if (rtc_failed) { |
| 287 | reg8 &= ~RTC_BATTERY_DEAD; |
| 288 | pci_write_config8(dev, D31F0_GEN_PMCON_3, reg8); |
| 289 | } |
| 290 | printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); |
| 291 | |
| 292 | cmos_init(rtc_failed); |
| 293 | } |
| 294 | |
| 295 | static void enable_hpet(void) |
| 296 | { |
| 297 | u32 reg32; |
| 298 | |
| 299 | /* Move HPET to default address 0xfed00000 and enable it */ |
| 300 | reg32 = RCBA32(RCBA_HPTC); |
| 301 | reg32 |= (1 << 7); // HPET Address Enable |
| 302 | reg32 &= ~(3 << 0); |
| 303 | RCBA32(RCBA_HPTC) = reg32; |
| 304 | } |
| 305 | |
| 306 | static void enable_clock_gating(void) |
| 307 | { |
| 308 | u32 reg32; |
| 309 | |
| 310 | /* Enable DMI dynamic clock gating. */ |
| 311 | RCBA32(RCBA_DMIC) |= 3; |
| 312 | |
| 313 | /* Enable Clock Gating for most devices. */ |
| 314 | reg32 = RCBA32(RCBA_CG); |
| 315 | reg32 |= (1 << 31); /* LPC dynamic clock gating */ |
| 316 | /* USB UHCI dynamic clock gating: */ |
| 317 | reg32 |= (1 << 29) | (1 << 28); |
| 318 | /* SATA dynamic clock gating [0-3]: */ |
| 319 | reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24); |
| 320 | reg32 |= (1 << 23); /* LAN static clock gating (if LAN disabled) */ |
| 321 | reg32 |= (1 << 22); /* HD audio dynamic clock gating */ |
| 322 | reg32 &= ~(1 << 21); /* No HD audio static clock gating */ |
| 323 | reg32 &= ~(1 << 20); /* No USB EHCI static clock gating */ |
| 324 | reg32 |= (1 << 19); /* USB EHCI dynamic clock gating */ |
| 325 | /* More SATA dynamic clock gating [4-5]: */ |
| 326 | reg32 |= (1 << 18) | (1 << 17); |
| 327 | reg32 |= (1 << 16); /* PCI dynamic clock gating */ |
| 328 | /* PCIe, DMI dynamic clock gating: */ |
| 329 | reg32 |= (1 << 4) | (1 << 3) | (1 << 2) | (1 << 1); |
| 330 | reg32 |= (1 << 0); /* PCIe root port static clock gating */ |
| 331 | RCBA32(RCBA_CG) = reg32; |
| 332 | |
| 333 | /* Enable SPI dynamic clock gating. */ |
| 334 | RCBA32(0x38c0) |= 7; |
| 335 | } |
| 336 | |
Kyösti Mälkki | 83d6a8a | 2019-07-12 08:16:53 +0300 | [diff] [blame] | 337 | static void i82801jx_set_acpi_mode(struct device *dev) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 338 | { |
Kyösti Mälkki | ad882c3 | 2020-06-02 05:05:30 +0300 | [diff] [blame] | 339 | if (!acpi_is_wakeup_s3()) { |
| 340 | apm_control(APM_CNT_ACPI_DISABLE); |
| 341 | } else { |
| 342 | apm_control(APM_CNT_ACPI_ENABLE); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 343 | } |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 344 | } |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 345 | |
| 346 | static void lpc_init(struct device *dev) |
| 347 | { |
Elyes HAOUAS | bfc255a | 2020-03-07 13:05:14 +0100 | [diff] [blame] | 348 | printk(BIOS_DEBUG, "i82801jx: %s\n", __func__); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 349 | |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 350 | /* IO APIC initialization. */ |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 351 | i82801jx_enable_apic(dev); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 352 | |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 353 | i82801jx_enable_serial_irqs(dev); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 354 | |
| 355 | /* Setup the PIRQ. */ |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 356 | i82801jx_pirq_init(dev); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 357 | |
| 358 | /* Setup power options. */ |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 359 | i82801jx_power_options(dev); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 360 | |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 361 | /* Initialize the real time clock. */ |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 362 | i82801jx_rtc_init(dev); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 363 | |
| 364 | /* Initialize ISA DMA. */ |
| 365 | isa_dma_init(); |
| 366 | |
| 367 | /* Initialize the High Precision Event Timers, if present. */ |
| 368 | enable_hpet(); |
| 369 | |
| 370 | /* Initialize Clock Gating */ |
| 371 | enable_clock_gating(); |
| 372 | |
| 373 | setup_i8259(); |
| 374 | |
| 375 | /* The OS should do this? */ |
| 376 | /* Interrupt 9 should be level triggered (SCI) */ |
| 377 | i8259_configure_irq_trigger(9, 1); |
| 378 | |
Kyösti Mälkki | 44da9e7 | 2019-10-09 12:32:16 +0300 | [diff] [blame] | 379 | i82801jx_set_acpi_mode(dev); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 380 | } |
| 381 | |
Elyes HAOUAS | 1a8c1df | 2018-05-13 13:36:44 +0200 | [diff] [blame] | 382 | static void i82801jx_lpc_read_resources(struct device *dev) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 383 | { |
Arthur Heymans | e5dcaf1 | 2017-04-12 00:03:37 +0200 | [diff] [blame] | 384 | int i, io_index = 0; |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 385 | /* |
| 386 | * I/O Resources |
| 387 | * |
| 388 | * 0x0000 - 0x000f....ISA DMA |
| 389 | * 0x0010 - 0x001f....ISA DMA aliases |
| 390 | * 0x0020 ~ 0x003d....PIC |
| 391 | * 0x002e - 0x002f....Maybe Super I/O |
| 392 | * 0x0040 - 0x0043....Timer |
| 393 | * 0x004e - 0x004f....Maybe Super I/O |
| 394 | * 0x0050 - 0x0053....Timer aliases |
| 395 | * 0x0061.............NMI_SC |
| 396 | * 0x0070.............NMI_EN (readable in alternative access mode) |
| 397 | * 0x0070 - 0x0077....RTC |
| 398 | * 0x0080 - 0x008f....ISA DMA |
| 399 | * 0x0090 ~ 0x009f....ISA DMA aliases |
| 400 | * 0x0092.............Fast A20 and Init |
| 401 | * 0x00a0 ~ 0x00bd....PIC |
| 402 | * 0x00b2 - 0x00b3....APM |
| 403 | * 0x00c0 ~ 0x00de....ISA DMA |
| 404 | * 0x00c1 ~ 0x00df....ISA DMA aliases |
| 405 | * 0x00f0.............Coprocessor Error |
Angel Pons | b21bffa | 2020-07-03 01:02:28 +0200 | [diff] [blame] | 406 | * (0x0400-0x041f)....SMBus (CONFIG_FIXED_SMBUS_IO_BASE, during raminit) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 407 | * 0x04d0 - 0x04d1....PIC |
| 408 | * 0x0500 - 0x057f....PM (DEFAULT_PMBASE) |
| 409 | * 0x0580 - 0x05bf....SB GPIO (DEFAULT_GPIOBASE) |
| 410 | * 0x05c0 - 0x05ff....SB GPIO cont. (mobile only) |
| 411 | * 0x0cf8 - 0x0cff....PCI |
| 412 | * 0x0cf9.............Reset Control |
| 413 | */ |
| 414 | |
| 415 | struct resource *res; |
| 416 | |
| 417 | /* Get the normal PCI resources of this device. */ |
| 418 | pci_dev_read_resources(dev); |
| 419 | |
| 420 | /* Add an extra subtractive resource for both memory and I/O. */ |
Arthur Heymans | e5dcaf1 | 2017-04-12 00:03:37 +0200 | [diff] [blame] | 421 | res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 422 | res->base = 0; |
| 423 | res->size = 0x1000; |
| 424 | res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | |
| 425 | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
| 426 | |
Arthur Heymans | e5dcaf1 | 2017-04-12 00:03:37 +0200 | [diff] [blame] | 427 | res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); |
| 428 | res->base = 0xff000000; |
| 429 | res->size = 0x01000000; /* 16 MB for flash */ |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 430 | res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | |
| 431 | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
| 432 | |
| 433 | res = new_resource(dev, 3); /* IOAPIC */ |
| 434 | res->base = IO_APIC_ADDR; |
| 435 | res->size = 0x00001000; |
| 436 | res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
Arthur Heymans | e5dcaf1 | 2017-04-12 00:03:37 +0200 | [diff] [blame] | 437 | |
| 438 | /* Set IO decode ranges if required.*/ |
| 439 | for (i = 0; i < 4; i++) { |
| 440 | u32 gen_dec; |
| 441 | gen_dec = pci_read_config32(dev, 0x84 + 4 * i); |
| 442 | |
| 443 | if ((gen_dec & 0xFFFC) > 0x1000) { |
| 444 | res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); |
| 445 | res->base = gen_dec & 0xFFFC; |
| 446 | res->size = (gen_dec >> 16) & 0xFC; |
| 447 | res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | |
| 448 | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
| 449 | } |
| 450 | } |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 451 | } |
| 452 | |
Arthur Heymans | a8a9f34 | 2017-12-24 08:11:13 +0100 | [diff] [blame] | 453 | static const char *lpc_acpi_name(const struct device *dev) |
| 454 | { |
| 455 | return "LPCB"; |
| 456 | } |
| 457 | |
Furquan Shaikh | 7536a39 | 2020-04-24 21:59:21 -0700 | [diff] [blame] | 458 | static void southbridge_fill_ssdt(const struct device *device) |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 459 | { |
Kyösti Mälkki | c70eed1 | 2018-05-22 02:18:00 +0300 | [diff] [blame] | 460 | struct device *dev = pcidev_on_root(0x1f, 0); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 461 | config_t *chip = dev->chip_info; |
| 462 | |
| 463 | intel_acpi_pcie_hotplug_generator(chip->pcie_hotplug_map, 8); |
Arthur Heymans | a8a9f34 | 2017-12-24 08:11:13 +0100 | [diff] [blame] | 464 | intel_acpi_gen_def_acpi_pirq(device); |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 465 | } |
| 466 | |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 467 | static struct device_operations device_ops = { |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 468 | .read_resources = i82801jx_lpc_read_resources, |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 469 | .set_resources = pci_dev_set_resources, |
| 470 | .enable_resources = pci_dev_enable_resources, |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 471 | .write_acpi_tables = acpi_write_hpet, |
Nico Huber | 68680dd | 2020-03-31 17:34:52 +0200 | [diff] [blame] | 472 | .acpi_fill_ssdt = southbridge_fill_ssdt, |
Arthur Heymans | a8a9f34 | 2017-12-24 08:11:13 +0100 | [diff] [blame] | 473 | .acpi_name = lpc_acpi_name, |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 474 | .init = lpc_init, |
Nico Huber | 51b75ae | 2019-03-14 16:02:05 +0100 | [diff] [blame] | 475 | .scan_bus = scan_static_bus, |
Angel Pons | 1fc0edd | 2020-05-31 00:03:28 +0200 | [diff] [blame] | 476 | .ops_pci = &pci_dev_ops_pci, |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 477 | }; |
| 478 | |
| 479 | static const unsigned short pci_device_ids[] = { |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 480 | 0x3a10, /* ICH10R Eng. Sample */ |
| 481 | 0x3a14, /* ICH10DO */ |
| 482 | 0x3a16, /* ICH10R */ |
| 483 | 0x3a18, /* ICH10 */ |
| 484 | 0x3a1a, /* ICH10D */ |
| 485 | 0x3a1e, /* ICH10 Eng. Sample */ |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 486 | 0 |
| 487 | }; |
| 488 | |
Arthur Heymans | 349e085 | 2017-04-09 20:48:37 +0200 | [diff] [blame] | 489 | static const struct pci_driver ich10_lpc __pci_driver = { |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 490 | .ops = &device_ops, |
Felix Singer | 43b7f41 | 2022-03-07 04:34:52 +0100 | [diff] [blame] | 491 | .vendor = PCI_VID_INTEL, |
Arthur Heymans | 7b9c139 | 2017-04-09 20:40:39 +0200 | [diff] [blame] | 492 | .devices = pci_device_ids, |
| 493 | }; |