src/mainboard/system76/adl/variants/oryp10/overridetree.cb

chip soc/intel/alderlake
	register "power_limits_config[ADL_P_642_682_45W_CORE]" = "{
		.tdp_pl1_override = 45,
		.tdp_pl2_override = 115,
		.tdp_psyspl2 = 135,
	}"

	# Thermal
	register "tcc_offset" = "10"

	# GPE configuration
	register "pmc_gpe0_dw0" = "PMC_GPP_A"
	register "pmc_gpe0_dw1" = "PMC_GPP_R"
	register "pmc_gpe0_dw2" = "PMC_GPD"

	device domain 0 on
		subsystemid 0x1558 0x65f5 inherit

		device ref pcie5_0 on
			# CPU PCIe RP#2 x8, Clock 3 (DGPU)
			register "cpu_pcie_rp[CPU_RP(2)]" = "{
				.clk_src = 3,
				.clk_req = 3,
				.flags = PCIE_RP_LTR,
			}"
		end
		device ref igpu on
			register "ddi_portA_config" = "1"
			register "ddi_ports_config[DDI_PORT_A]" = "DDI_ENABLE_HPD"
		end
		device ref pcie4_0 on
			# CPU PCIe RP#1 x4, Clock 0 (SSD1)
			register "cpu_pcie_rp[CPU_RP(1)]" = "{
				.clk_src = 0,
				.clk_req = 0,
				.flags = PCIE_RP_LTR,
			}"
		end
		device ref pcie4_1 on
			# CPU PCIe RP#3 x4, Clock 4 (SSD2)
			register "cpu_pcie_rp[CPU_RP(3)]" = "{
				.clk_src = 4,
				.clk_req = 4,
				.flags = PCIE_RP_LTR,
			}"
		end
		device ref tcss_xhci on
			register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC_SKIP)"
			chip drivers/usb/acpi
				device ref tcss_root_hub on
					chip drivers/usb/acpi
						register "desc" = ""USB3 TYPEC2""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						device ref tcss_usb3_port1 on end
					end
				end
			end
		end
		device ref tcss_dma0 on
			chip drivers/intel/usb4/retimer
				register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
				use tcss_usb3_port1 as dfp[0].typec_port
				device generic 0 on end
			end
		end
		device ref xhci on
			register "usb2_ports" = "{
				[0] = USB2_PORT_TYPE_C(OC_SKIP),	/* TYPEC1 (USB 3.2 Gen2) */
				[1] = USB2_PORT_MID(OC_SKIP),		/* J_USB2 */
				[2] = USB2_PORT_MID(OC_SKIP),		/* J_USB1 */
				[5] = USB2_PORT_MID(OC_SKIP),		/* Per-KB */
				[6] = USB2_PORT_MID(OC_SKIP),		/* Fingerprint */
				[7] = USB2_PORT_MID(OC_SKIP),		/* Camera */
				[8] = USB2_PORT_TYPE_C(OC_SKIP),	/* TYPEC2 (Thunderbolt) */
				[9] = USB2_PORT_MID(OC_SKIP),		/* Bluetooth */
			}"
			register "usb3_ports" = "{
				[0] = USB3_PORT_DEFAULT(OC_SKIP),	/* TYPEC1 (USB 3.2 Gen2) */
				[1] = USB3_PORT_DEFAULT(OC_SKIP),	/* J_USB2 */
				[2] = USB3_PORT_DEFAULT(OC_SKIP),	/* J_USB1 */
			}"
			# ACPI
			chip drivers/usb/acpi
				device ref xhci_root_hub on
					chip drivers/usb/acpi
						register "desc" = ""USB2 TYPEC1""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						device ref usb2_port1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 J_USB2""
						register "type" = "UPC_TYPE_A"
						device ref usb2_port2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 J_USB1""
						register "type" = "UPC_TYPE_A"
						device ref usb2_port3 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Per-KB""
						register "type" = "UPC_TYPE_INTERNAL"
						device ref usb2_port6 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Fingerprint""
						register "type" = "UPC_TYPE_INTERNAL"
						device ref usb2_port7 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Camera""
						register "type" = "UPC_TYPE_INTERNAL"
						device ref usb2_port8 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 TYPEC2""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						device ref usb2_port9 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Bluetooth""
						register "type" = "UPC_TYPE_INTERNAL"
						device ref usb2_port10 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 TYPEC1""
						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
						device ref usb3_port1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 J_USB2""
						register "type" = "UPC_TYPE_A"
						device ref usb3_port2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 J_USB2""
						register "type" = "UPC_TYPE_A"
						device ref usb3_port3 on end
					end
				end
			end
		end
		device ref sata off end
		device ref pcie_rp5 on
			# PCIe RP#5 x1, Clock 2 (WLAN)
			register "pch_pcie_rp[PCH_RP(5)]" = "{
				.clk_src = 2,
				.clk_req = 2,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
		end
		device ref pcie_rp6 on
			# PCIe RP#6 x1, Clock 6 (CARD)
			register "pch_pcie_rp[PCH_RP(6)]" = "{
				.clk_src = 6,
				.clk_req = 6,
				.flags = PCIE_RP_HOTPLUG | PCIE_RP_AER,
			}"
		end
		device ref pcie_rp8 on
			# PCIe RP#8 x1, Clock 5 (GLAN)
			register "pch_pcie_rp[PCH_RP(8)]" = "{
				.clk_src = 5,
				.clk_req = 5,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
		end

		device ref pmc hidden
			chip drivers/intel/pmc_mux
				device generic 0 on
					chip drivers/intel/pmc_mux/conn
						# TYPEC2
						use usb2_port9 as usb2_port
						use tcss_usb3_port1 as usb3_port
						device generic 0 alias conn0 on end
					end
				end
			end
		end
	end
end