Ronak Kanabar | 1ae366f | 2023-06-07 01:21:56 +0530 | [diff] [blame^] | 1 | /** @file |
| 2 | This protocol provides services that allow NVM Express commands to be sent to an |
| 3 | NVM Express controller or to a specific namespace in a NVM Express controller. |
| 4 | This protocol interface is optimized for storage. |
| 5 | |
| 6 | Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR> |
| 7 | SPDX-License-Identifier: BSD-2-Clause-Patent |
| 8 | |
| 9 | @par Revision Reference: |
| 10 | This Protocol was introduced in UEFI Specification 2.5. |
| 11 | |
| 12 | **/ |
| 13 | |
| 14 | #ifndef _UEFI_NVM_EXPRESS_PASS_THRU_H_ |
| 15 | #define _UEFI_NVM_EXPRESS_PASS_THRU_H_ |
| 16 | |
| 17 | #define EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID \ |
| 18 | { \ |
| 19 | 0x52c78312, 0x8edc, 0x4233, { 0x98, 0xf2, 0x1a, 0x1a, 0xa5, 0xe3, 0x88, 0xa5 } \ |
| 20 | } |
| 21 | |
| 22 | typedef struct _EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL; |
| 23 | |
| 24 | typedef struct { |
| 25 | UINT32 Attributes; |
| 26 | UINT32 IoAlign; |
| 27 | UINT32 NvmeVersion; |
| 28 | } EFI_NVM_EXPRESS_PASS_THRU_MODE; |
| 29 | |
| 30 | // |
| 31 | // If this bit is set, then the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL interface is |
| 32 | // for directly addressable namespaces. |
| 33 | // |
| 34 | #define EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_PHYSICAL 0x0001 |
| 35 | // |
| 36 | // If this bit is set, then the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL interface is |
| 37 | // for a single volume logical namespace comprised of multiple namespaces. |
| 38 | // |
| 39 | #define EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_LOGICAL 0x0002 |
| 40 | // |
| 41 | // If this bit is set, then the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL interface |
| 42 | // supports non-blocking I/O. |
| 43 | // |
| 44 | #define EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_NONBLOCKIO 0x0004 |
| 45 | // |
| 46 | // If this bit is set, then the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL interface |
| 47 | // supports NVM command set. |
| 48 | // |
| 49 | #define EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_CMD_SET_NVM 0x0008 |
| 50 | |
| 51 | // |
| 52 | // FusedOperation |
| 53 | // |
| 54 | #define NORMAL_CMD 0x00 |
| 55 | #define FUSED_FIRST_CMD 0x01 |
| 56 | #define FUSED_SECOND_CMD 0x02 |
| 57 | |
| 58 | typedef struct { |
| 59 | UINT32 Opcode : 8; |
| 60 | UINT32 FusedOperation : 2; |
| 61 | UINT32 Reserved : 22; |
| 62 | } NVME_CDW0; |
| 63 | |
| 64 | // |
| 65 | // Flags |
| 66 | // |
| 67 | #define CDW2_VALID 0x01 |
| 68 | #define CDW3_VALID 0x02 |
| 69 | #define CDW10_VALID 0x04 |
| 70 | #define CDW11_VALID 0x08 |
| 71 | #define CDW12_VALID 0x10 |
| 72 | #define CDW13_VALID 0x20 |
| 73 | #define CDW14_VALID 0x40 |
| 74 | #define CDW15_VALID 0x80 |
| 75 | |
| 76 | // |
| 77 | // Queue Type |
| 78 | // |
| 79 | #define NVME_ADMIN_QUEUE 0x00 |
| 80 | #define NVME_IO_QUEUE 0x01 |
| 81 | |
| 82 | typedef struct { |
| 83 | NVME_CDW0 Cdw0; |
| 84 | UINT8 Flags; |
| 85 | UINT32 Nsid; |
| 86 | UINT32 Cdw2; |
| 87 | UINT32 Cdw3; |
| 88 | UINT32 Cdw10; |
| 89 | UINT32 Cdw11; |
| 90 | UINT32 Cdw12; |
| 91 | UINT32 Cdw13; |
| 92 | UINT32 Cdw14; |
| 93 | UINT32 Cdw15; |
| 94 | } EFI_NVM_EXPRESS_COMMAND; |
| 95 | |
| 96 | typedef struct { |
| 97 | UINT32 DW0; |
| 98 | UINT32 DW1; |
| 99 | UINT32 DW2; |
| 100 | UINT32 DW3; |
| 101 | } EFI_NVM_EXPRESS_COMPLETION; |
| 102 | |
| 103 | typedef struct { |
| 104 | UINT64 CommandTimeout; |
| 105 | VOID *TransferBuffer; |
| 106 | UINT32 TransferLength; |
| 107 | VOID *MetadataBuffer; |
| 108 | UINT32 MetadataLength; |
| 109 | UINT8 QueueType; |
| 110 | EFI_NVM_EXPRESS_COMMAND *NvmeCmd; |
| 111 | EFI_NVM_EXPRESS_COMPLETION *NvmeCompletion; |
| 112 | } EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET; |
| 113 | |
| 114 | // |
| 115 | // Protocol function prototypes |
| 116 | // |
| 117 | |
| 118 | /** |
| 119 | Sends an NVM Express Command Packet to an NVM Express controller or namespace. This function supports |
| 120 | both blocking I/O and non-blocking I/O. The blocking I/O functionality is required, and the non-blocking |
| 121 | I/O functionality is optional. |
| 122 | |
| 123 | |
| 124 | @param[in] This A pointer to the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL instance. |
| 125 | @param[in] NamespaceId A 32 bit namespace ID as defined in the NVMe specification to which the NVM Express Command |
| 126 | Packet will be sent. A value of 0 denotes the NVM Express controller, a value of all 0xFF's |
| 127 | (all bytes are 0xFF) in the namespace ID specifies that the command packet should be sent to |
| 128 | all valid namespaces. |
| 129 | @param[in,out] Packet A pointer to the NVM Express Command Packet. |
| 130 | @param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking I/O is performed. |
| 131 | If Event is NULL, then blocking I/O is performed. If Event is not NULL and non-blocking I/O |
| 132 | is supported, then non-blocking I/O is performed, and Event will be signaled when the NVM |
| 133 | Express Command Packet completes. |
| 134 | |
| 135 | @retval EFI_SUCCESS The NVM Express Command Packet was sent by the host. TransferLength bytes were transferred |
| 136 | to, or from DataBuffer. |
| 137 | @retval EFI_BAD_BUFFER_SIZE The NVM Express Command Packet was not executed. The number of bytes that could be transferred |
| 138 | is returned in TransferLength. |
| 139 | @retval EFI_NOT_READY The NVM Express Command Packet could not be sent because the controller is not ready. The caller |
| 140 | may retry again later. |
| 141 | @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the NVM Express Command Packet. |
| 142 | @retval EFI_INVALID_PARAMETER NamespaceId or the contents of EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET are invalid. The NVM |
| 143 | Express Command Packet was not sent, so no additional status information is available. |
| 144 | @retval EFI_UNSUPPORTED The command described by the NVM Express Command Packet is not supported by the NVM Express |
| 145 | controller. The NVM Express Command Packet was not sent so no additional status information |
| 146 | is available. |
| 147 | @retval EFI_TIMEOUT A timeout occurred while waiting for the NVM Express Command Packet to execute. |
| 148 | |
| 149 | **/ |
| 150 | typedef |
| 151 | EFI_STATUS |
| 152 | (EFIAPI *EFI_NVM_EXPRESS_PASS_THRU_PASSTHRU)( |
| 153 | IN EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *This, |
| 154 | IN UINT32 NamespaceId, |
| 155 | IN OUT EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet, |
| 156 | IN EFI_EVENT Event OPTIONAL |
| 157 | ); |
| 158 | |
| 159 | /** |
| 160 | Used to retrieve the next namespace ID for this NVM Express controller. |
| 161 | |
| 162 | The EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.GetNextNamespace() function retrieves the next valid |
| 163 | namespace ID on this NVM Express controller. |
| 164 | |
| 165 | If on input the value pointed to by NamespaceId is 0xFFFFFFFF, then the first valid namespace |
| 166 | ID defined on the NVM Express controller is returned in the location pointed to by NamespaceId |
| 167 | and a status of EFI_SUCCESS is returned. |
| 168 | |
| 169 | If on input the value pointed to by NamespaceId is an invalid namespace ID other than 0xFFFFFFFF, |
| 170 | then EFI_INVALID_PARAMETER is returned. |
| 171 | |
| 172 | If on input the value pointed to by NamespaceId is a valid namespace ID, then the next valid |
| 173 | namespace ID on the NVM Express controller is returned in the location pointed to by NamespaceId, |
| 174 | and EFI_SUCCESS is returned. |
| 175 | |
| 176 | If the value pointed to by NamespaceId is the namespace ID of the last namespace on the NVM |
| 177 | Express controller, then EFI_NOT_FOUND is returned. |
| 178 | |
| 179 | @param[in] This A pointer to the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL instance. |
| 180 | @param[in,out] NamespaceId On input, a pointer to a legal NamespaceId for an NVM Express |
| 181 | namespace present on the NVM Express controller. On output, a |
| 182 | pointer to the next NamespaceId of an NVM Express namespace on |
| 183 | an NVM Express controller. An input value of 0xFFFFFFFF retrieves |
| 184 | the first NamespaceId for an NVM Express namespace present on an |
| 185 | NVM Express controller. |
| 186 | |
| 187 | @retval EFI_SUCCESS The Namespace ID of the next Namespace was returned. |
| 188 | @retval EFI_NOT_FOUND There are no more namespaces defined on this controller. |
| 189 | @retval EFI_INVALID_PARAMETER NamespaceId is an invalid value other than 0xFFFFFFFF. |
| 190 | |
| 191 | **/ |
| 192 | typedef |
| 193 | EFI_STATUS |
| 194 | (EFIAPI *EFI_NVM_EXPRESS_PASS_THRU_GET_NEXT_NAMESPACE)( |
| 195 | IN EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *This, |
| 196 | IN OUT UINT32 *NamespaceId |
| 197 | ); |
| 198 | |
| 199 | /** |
| 200 | Used to allocate and build a device path node for an NVM Express namespace on an NVM Express controller. |
| 201 | |
| 202 | The EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.BuildDevicePath() function allocates and builds a single device |
| 203 | path node for the NVM Express namespace specified by NamespaceId. |
| 204 | |
| 205 | If the NamespaceId is not valid, then EFI_NOT_FOUND is returned. |
| 206 | |
| 207 | If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. |
| 208 | |
| 209 | If there are not enough resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned. |
| 210 | |
| 211 | Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of DevicePath are |
| 212 | initialized to describe the NVM Express namespace specified by NamespaceId, and EFI_SUCCESS is returned. |
| 213 | |
| 214 | @param[in] This A pointer to the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL instance. |
| 215 | @param[in] NamespaceId The NVM Express namespace ID for which a device path node is to be |
| 216 | allocated and built. Caller must set the NamespaceId to zero if the |
| 217 | device path node will contain a valid UUID. |
| 218 | @param[out] DevicePath A pointer to a single device path node that describes the NVM Express |
| 219 | namespace specified by NamespaceId. This function is responsible for |
| 220 | allocating the buffer DevicePath with the boot service AllocatePool(). |
| 221 | It is the caller's responsibility to free DevicePath when the caller |
| 222 | is finished with DevicePath. |
| 223 | @retval EFI_SUCCESS The device path node that describes the NVM Express namespace specified |
| 224 | by NamespaceId was allocated and returned in DevicePath. |
| 225 | @retval EFI_NOT_FOUND The NamespaceId is not valid. |
| 226 | @retval EFI_INVALID_PARAMETER DevicePath is NULL. |
| 227 | @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate the DevicePath node. |
| 228 | |
| 229 | **/ |
| 230 | typedef |
| 231 | EFI_STATUS |
| 232 | (EFIAPI *EFI_NVM_EXPRESS_PASS_THRU_BUILD_DEVICE_PATH)( |
| 233 | IN EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *This, |
| 234 | IN UINT32 NamespaceId, |
| 235 | OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath |
| 236 | ); |
| 237 | |
| 238 | /** |
| 239 | Used to translate a device path node to a namespace ID. |
| 240 | |
| 241 | The EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.GetNamespace() function determines the namespace ID associated with the |
| 242 | namespace described by DevicePath. |
| 243 | |
| 244 | If DevicePath is a device path node type that the NVM Express Pass Thru driver supports, then the NVM Express |
| 245 | Pass Thru driver will attempt to translate the contents DevicePath into a namespace ID. |
| 246 | |
| 247 | If this translation is successful, then that namespace ID is returned in NamespaceId, and EFI_SUCCESS is returned |
| 248 | |
| 249 | @param[in] This A pointer to the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL instance. |
| 250 | @param[in] DevicePath A pointer to the device path node that describes an NVM Express namespace on |
| 251 | the NVM Express controller. |
| 252 | @param[out] NamespaceId The NVM Express namespace ID contained in the device path node. |
| 253 | |
| 254 | @retval EFI_SUCCESS DevicePath was successfully translated to NamespaceId. |
| 255 | @retval EFI_INVALID_PARAMETER If DevicePath or NamespaceId are NULL, then EFI_INVALID_PARAMETER is returned. |
| 256 | @retval EFI_UNSUPPORTED If DevicePath is not a device path node type that the NVM Express Pass Thru driver |
| 257 | supports, then EFI_UNSUPPORTED is returned. |
| 258 | @retval EFI_NOT_FOUND If DevicePath is a device path node type that the NVM Express Pass Thru driver |
| 259 | supports, but there is not a valid translation from DevicePath to a namespace ID, |
| 260 | then EFI_NOT_FOUND is returned. |
| 261 | **/ |
| 262 | typedef |
| 263 | EFI_STATUS |
| 264 | (EFIAPI *EFI_NVM_EXPRESS_PASS_THRU_GET_NAMESPACE)( |
| 265 | IN EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *This, |
| 266 | IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, |
| 267 | OUT UINT32 *NamespaceId |
| 268 | ); |
| 269 | |
| 270 | // |
| 271 | // Protocol Interface Structure |
| 272 | // |
| 273 | struct _EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL { |
| 274 | EFI_NVM_EXPRESS_PASS_THRU_MODE *Mode; |
| 275 | EFI_NVM_EXPRESS_PASS_THRU_PASSTHRU PassThru; |
| 276 | EFI_NVM_EXPRESS_PASS_THRU_GET_NEXT_NAMESPACE GetNextNamespace; |
| 277 | EFI_NVM_EXPRESS_PASS_THRU_BUILD_DEVICE_PATH BuildDevicePath; |
| 278 | EFI_NVM_EXPRESS_PASS_THRU_GET_NAMESPACE GetNamespace; |
| 279 | }; |
| 280 | |
| 281 | extern EFI_GUID gEfiNvmExpressPassThruProtocolGuid; |
| 282 | |
| 283 | #endif |