src/cpu/intel/car/cache_as_ram_ht.inc

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich@gmail.com>
 * Copyright (C) 2005 Tyan (written by Yinghai Lu for Tyan)
 * Copyright (C) 2007-2008 coresystems GmbH
 * Copyright (C) 2012 Kyösti Mälkki <kyosti.malkki@gmail.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

#include <cpu/x86/stack.h>
#include <cpu/x86/mtrr.h>
#include <cpu/x86/post_code.h>
#include <cpu/x86/lapic_def.h>

/* Macro to access Local APIC registers at default base. */
#define LAPIC(x)		$(LAPIC_DEFAULT_BASE | LAPIC_ ## x)
#define START_IPI_VECTOR	((CONFIG_AP_SIPI_VECTOR >> 12) & 0xff)

/* Base address to cache all of Flash ROM, just below 4GB. */
#define CACHE_ROM_BASE	((1<<22 - CONFIG_CACHE_ROM_SIZE>>10)<<10)

#define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE
#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE

	/* Save the BIST result. */
	movl	%eax, %ebp

cache_as_ram:
	post_code(0x20)

	movl	$LAPIC_BASE_MSR, %ecx
	rdmsr
	andl	$LAPIC_BASE_MSR_BOOTSTRAP_PROCESSOR, %eax
	jz	ap_init

	/* Zero out all fixed range and variable range MTRRs.
	 * For hyper-threaded CPUs these are shared.
	 */
	movl	$mtrr_table, %esi
	movl	$((mtrr_table_end - mtrr_table) / 2), %edi
	xorl	%eax, %eax
	xorl	%edx, %edx
clear_mtrrs:
	movw	(%esi), %bx
	movzx	%bx, %ecx
	wrmsr
	add	$2, %esi
	dec	%edi
	jnz	clear_mtrrs

	post_code(0x21)

	/* Configure the default memory type to uncacheable. */
	movl	$MTRRdefType_MSR, %ecx
	rdmsr
	andl	$(~0x00000cff), %eax
	wrmsr

	post_code(0x22)

	/* Determine CPU_ADDR_BITS and load PHYSMASK high
	 * word to %edx.
	 */
	movl	$0x80000000, %eax
	cpuid
	cmpl	$0x80000008, %eax
	jc	addrsize_no_MSR
	movl	$0x80000008, %eax
	cpuid
	movb	%al, %cl
	sub	$32, %cl
	movl	$1, %edx
	shl	%cl, %edx
	subl	$1, %edx
	jmp	addrsize_set_high
addrsize_no_MSR:
	movl	$1, %eax
	cpuid
	andl	$(1<<6 | 1<<17), %edx	/* PAE or PSE36 */
	jz	addrsize_set_high
	movl	$0x0f, %edx

	/* Preload high word of address mask (in %edx) for Variable
	 * MTRRs 0 and 1 and enable local apic at default base.
	 */
addrsize_set_high:
	xorl	%eax, %eax
	movl	$MTRRphysMask_MSR(0), %ecx
	wrmsr
	movl	$MTRRphysMask_MSR(1), %ecx
	wrmsr
	movl	$LAPIC_BASE_MSR, %ecx
	not	%edx
	movl	%edx, %ebx
	rdmsr
	andl	%ebx, %edx
	andl	$(~LAPIC_BASE_MSR_ADDR_MASK), %eax
	orl	$(LAPIC_DEFAULT_BASE | LAPIC_BASE_MSR_ENABLE), %eax
	wrmsr

bsp_init:

	post_code(0x23)

	/* Send INIT IPI to all excluding ourself. */
	movl	LAPIC(ICR), %edi
	movl	$(LAPIC_DEST_ALLBUT | LAPIC_INT_ASSERT | LAPIC_DM_INIT), %eax
1:	movl	%eax, (%edi)
	movl	$0x30, %ecx
2:	pause
	dec	%ecx
	jnz	2b
	movl	(%edi), %ecx
	andl	$LAPIC_ICR_BUSY, %ecx
	jnz	1b

	post_code(0x24)

	/* For a hyper-threading processor, cache must not be disabled
	 * on an AP on the same physical package with the BSP.
	 */
	movl	$01, %eax
	cpuid
	btl	$28, %edx
	jnc	sipi_complete
	bswapl	%ebx
	cmpb	$01, %bh
	jbe	sipi_complete

hyper_threading_cpu:

	/* delay 10 ms */
	movl	$10000, %ecx
1:	inb	$0x80, %al
	dec	%ecx
	jnz	1b

	post_code(0x25)

	/* Send Start IPI to all excluding ourself. */
	movl	LAPIC(ICR), %edi
	movl	$(LAPIC_DEST_ALLBUT | LAPIC_DM_STARTUP | START_IPI_VECTOR), %eax
1:	movl	%eax, (%edi)
	movl	$0x30, %ecx
2:	pause
	dec	%ecx
	jnz	2b
	movl	(%edi), %ecx
	andl	$LAPIC_ICR_BUSY, %ecx
	jnz	1b

	/* delay 250 us */
	movl	$250, %ecx
1:	inb	$0x80, %al
	dec	%ecx
	jnz	1b

	post_code(0x26)

	/* Wait for sibling CPU to start. */
1:	movl	$(MTRRphysBase_MSR(0)), %ecx
	rdmsr
	andl	%eax, %eax
	jnz	sipi_complete

	movl	$0x30, %ecx
2:	pause
	dec	%ecx
	jnz	2b
	jmp	1b


ap_init:
	post_code(0x27)

	/* Do not disable cache (so BSP can enable it). */
        movl	%cr0, %eax
	andl	$(~((1 << 30) | (1 << 29))), %eax
	movl	%eax, %cr0

	post_code(0x28)

	/* MTRR registers are shared between HT siblings. */
	movl	$(MTRRphysBase_MSR(0)), %ecx
	movl	$(1<<12), %eax
	xorl	%edx, %edx
	wrmsr

	post_code(0x29)

ap_halt:
	cli
1:	hlt
	jnz	1b



sipi_complete:

	post_code(0x2a)

	/* Set Cache-as-RAM base address. */
	movl	$(MTRRphysBase_MSR(0)), %ecx
	movl	$(CACHE_AS_RAM_BASE | MTRR_TYPE_WRBACK), %eax
	xorl	%edx, %edx
	wrmsr

	/* Set Cache-as-RAM mask. */
	movl	$(MTRRphysMask_MSR(0)), %ecx
	rdmsr
	movl	$(~(CACHE_AS_RAM_SIZE - 1) | MTRRphysMaskValid), %eax
	wrmsr

	/* Enable MTRR. */
	movl	$MTRRdefType_MSR, %ecx
	rdmsr
	orl	$MTRRdefTypeEn, %eax
	wrmsr

	post_code(0x2b)

	/* Enable L2 cache Write-Back (WBINVD and FLUSH#).
	 *
	 * MSR is set when DisplayFamily_DisplayModel is one of:
	 * 06_0x, 06_17, 06_1C
	 *
	 * Description says this bit enables use of WBINVD and FLUSH#.
	 * Should this be set only after the system bus and/or memory
	 * controller can successfully handle write cycles?
	 */

#define EAX_FAMILY(a)	(a << 8)	/* for family <= 0fH */
#define EAX_MODEL(a)	(((a & 0xf0) << 12) | ((a & 0xf) << 4))

	movl	$1, %eax
	cpuid
	movl	%eax, %ebx
	andl	$EAX_FAMILY(0x0f), %eax
	cmpl	$EAX_FAMILY(0x06), %eax
	jne	no_msr_11e
	movl	%ebx, %eax
	andl	$EAX_MODEL(0xff), %eax
	cmpl	$EAX_MODEL(0x17), %eax
	je	has_msr_11e
	cmpl	$EAX_MODEL(0x1c), %eax
	je	has_msr_11e
	andl	$EAX_MODEL(0xf0), %eax
	cmpl	$EAX_MODEL(0x00), %eax
	jne	no_msr_11e
has_msr_11e:
	movl	$0x11e, %ecx
	rdmsr
	orl	$(1 << 8), %eax
	wrmsr
no_msr_11e:

	post_code(0x2c)

	/* Enable cache (CR0.CD = 0, CR0.NW = 0). */
	movl	%cr0, %eax
	andl	$(~((1 << 30) | (1 << 29))), %eax
	invd
	movl	%eax, %cr0

	/* Clear the cache memory reagion. */
	cld
	xorl	%eax, %eax
	movl	$CACHE_AS_RAM_BASE, %edi
	movl	$(CACHE_AS_RAM_SIZE / 4), %ecx
	rep	stosl

	/* Enable Cache-as-RAM mode by disabling cache. */
	movl	%cr0, %eax
	orl	$(1 << 30), %eax
	movl	%eax, %cr0

	post_code(0x2d)

#if CONFIG_XIP_ROM_SIZE
	/* Enable cache for our code in Flash because we do XIP here */
	movl	$MTRRphysBase_MSR(1), %ecx
	xorl	%edx, %edx
	/*
	 * IMPORTANT: The following calculation _must_ be done at runtime. See
	 * http://www.coreboot.org/pipermail/coreboot/2010-October/060855.html
	 */
	movl	$copy_and_run, %eax
	andl	$(~(CONFIG_XIP_ROM_SIZE - 1)), %eax
	orl	$MTRR_TYPE_WRBACK, %eax
	wrmsr

	movl	$MTRRphysMask_MSR(1), %ecx
	rdmsr
	movl	$(~(CONFIG_XIP_ROM_SIZE - 1) | MTRRphysMaskValid), %eax
	wrmsr
#endif /* CONFIG_XIP_ROM_SIZE */

	/* Enable cache. */
	movl	%cr0, %eax
	andl	$(~((1 << 30) | (1 << 29))), %eax
	movl	%eax, %cr0

	post_code(0x2e)

	/* Set up the stack pointer. */
#if CONFIG_USBDEBUG
	/* Leave some space for the struct ehci_debug_info. */
	movl	$(CACHE_AS_RAM_BASE + CACHE_AS_RAM_SIZE - 4 - 128), %esp
#else
	movl	$(CACHE_AS_RAM_BASE + CACHE_AS_RAM_SIZE - 4), %esp
#endif

	/* Restore the BIST result. */
	movl	%ebp, %eax
	movl	%esp, %ebp
	pushl	%eax

	post_code(0x2f)

	/* Call romstage.c main function. */
	call	main
	addl	$4, %esp

	post_code(0x30)

	/* Disable cache. */
	movl	%cr0, %eax
	orl	$(1 << 30), %eax
	movl	%eax, %cr0

	post_code(0x34)

	/* Disable MTRR. */
	movl	$MTRRdefType_MSR, %ecx
	rdmsr
	andl	$(~MTRRdefTypeEn), %eax
	wrmsr

	post_code(0x35)

	invd

	post_code(0x36)

	/* Enable cache. */
	movl	%cr0, %eax
	andl	$~((1 << 30) | (1 << 29)), %eax
	movl	%eax, %cr0

	post_code(0x37)

	/* Disable cache. */
	movl	%cr0, %eax
	orl	$(1 << 30), %eax
	movl	%eax, %cr0

	post_code(0x38)

	/* Enable Write Back and Speculative Reads for low RAM. */
	movl	$MTRRphysBase_MSR(0), %ecx
	movl	$(0x00000000 | MTRR_TYPE_WRBACK), %eax
	xorl	%edx, %edx
	wrmsr
	movl	$MTRRphysMask_MSR(0), %ecx
	rdmsr
	movl	$(~(CONFIG_RAMTOP - 1) | MTRRphysMaskValid), %eax
	wrmsr

	/* Enable caching and Speculative Reads for Flash ROM device. */
	movl	$MTRRphysBase_MSR(1), %ecx
	movl	$(CACHE_ROM_BASE | MTRR_TYPE_WRPROT), %eax
	xorl	%edx, %edx
	wrmsr
	movl	$MTRRphysMask_MSR(1), %ecx
	rdmsr
	movl	$(~(CONFIG_CACHE_ROM_SIZE - 1) | MTRRphysMaskValid), %eax
	wrmsr

	post_code(0x39)

	/* And enable cache again after setting MTRRs. */
	movl	%cr0, %eax
	andl	$~((1 << 30) | (1 << 29)), %eax
	movl	%eax, %cr0

	post_code(0x3a)

	/* Enable MTRR. */
	movl	$MTRRdefType_MSR, %ecx
	rdmsr
	orl	$MTRRdefTypeEn, %eax
	wrmsr

	post_code(0x3b)

	/* Invalidate the cache again. */
	invd

	post_code(0x3c)

	/* Clear boot_complete flag. */
	xorl	%ebp, %ebp
__main:
	post_code(POST_PREPARE_RAMSTAGE)
	cld			/* Clear direction flag. */

	movl	%ebp, %esi

	movl	$ROMSTAGE_STACK, %esp
	movl	%esp, %ebp
	pushl	%esi
	call	copy_and_run

.Lhlt:
	post_code(POST_DEAD_CODE)
	hlt
	jmp	.Lhlt

mtrr_table:
	/* Fixed MTRRs */
	.word 0x250, 0x258, 0x259
	.word 0x268, 0x269, 0x26A
	.word 0x26B, 0x26C, 0x26D
	.word 0x26E, 0x26F
	/* Variable MTRRs */
	.word 0x200, 0x201, 0x202, 0x203
	.word 0x204, 0x205, 0x206, 0x207
	.word 0x208, 0x209, 0x20A, 0x20B
	.word 0x20C, 0x20D, 0x20E, 0x20F
mtrr_table_end: