| # SPDX-License-Identifier: GPL-2.0-only |
| |
| config SOUTHBRIDGE_AMD_AGESA_HUDSON |
| bool |
| |
| config SOUTHBRIDGE_AMD_AGESA_YANGTZE |
| bool |
| |
| if SOUTHBRIDGE_AMD_AGESA_HUDSON || SOUTHBRIDGE_AMD_AGESA_YANGTZE |
| |
| config SOUTHBRIDGE_SPECIFIC_OPTIONS |
| def_bool y |
| select HAVE_USBDEBUG_OPTIONS |
| select HAVE_CF9_RESET |
| select HAVE_CF9_RESET_PREPARE |
| select SOC_AMD_COMMON |
| select SOC_AMD_COMMON_BLOCK_ACPIMMIO |
| select SOC_AMD_COMMON_BLOCK_ACPIMMIO_BIOSRAM |
| select SOC_AMD_COMMON_BLOCK_PCI_MMCONF |
| |
| config EHCI_BAR |
| hex |
| default 0xfef00000 |
| |
| config HUDSON_XHCI_ENABLE |
| bool "Enable Hudson XHCI Controller" |
| default y if HUDSON_XHCI_FWM |
| help |
| The XHCI controller must be enabled and the XHCI firmware |
| must be added in order to have USB 3.0 support configured |
| by coreboot. The OS will be responsible for enabling the XHCI |
| controller if the XHCI firmware is available but the |
| XHCI controller is not enabled by coreboot. |
| |
| config HUDSON_XHCI_FWM |
| bool "Add xhci firmware" |
| default y if USE_BLOBS |
| help |
| Add Hudson 2/3/4 XHCI Firmware to support the onboard USB 3.0 |
| |
| config HUDSON_IMC_ENABLE |
| bool |
| default n |
| |
| config HUDSON_IMC_FWM |
| bool "Add IMC firmware" |
| depends on HUDSON_IMC_ENABLE |
| default y if USE_BLOBS |
| select SPI_FLASH_HAS_VOLATILE_GROUP if SPI_FLASH |
| help |
| Add Hudson 2/3/4 IMC Firmware to support the onboard fan control |
| |
| config HUDSON_GEC_FWM |
| bool |
| default n |
| help |
| Add Hudson 2/3/4 GEC Firmware to support the onboard gigabit Ethernet MAC. |
| Must be connected to a Broadcom B50610 or B50610M PHY on the motherboard. |
| |
| config HUDSON_XHCI_FWM_FILE |
| string "XHCI firmware path and filename" |
| default "3rdparty/blobs/southbridge/amd/hudson/xhci.bin" if SOUTHBRIDGE_AMD_AGESA_HUDSON |
| default "3rdparty/blobs/southbridge/amd/yangtze/xhci.bin" if SOUTHBRIDGE_AMD_AGESA_YANGTZE |
| depends on HUDSON_XHCI_FWM |
| |
| config HUDSON_IMC_FWM_FILE |
| string "IMC firmware path and filename" |
| default "3rdparty/blobs/southbridge/amd/hudson/imc.bin" if SOUTHBRIDGE_AMD_AGESA_HUDSON |
| default "3rdparty/blobs/southbridge/amd/yangtze/imc.bin" if SOUTHBRIDGE_AMD_AGESA_YANGTZE |
| depends on HUDSON_IMC_FWM |
| |
| config HUDSON_GEC_FWM_FILE |
| string "GEC firmware path and filename" |
| default "3rdparty/blobs/southbridge/amd/hudson/gec.bin" if SOUTHBRIDGE_AMD_AGESA_HUDSON |
| default "3rdparty/blobs/southbridge/amd/yangtze/gec.bin" if SOUTHBRIDGE_AMD_AGESA_YANGTZE |
| depends on HUDSON_GEC_FWM |
| |
| config HUDSON_SATA_MODE |
| int "SATA Mode" |
| default 2 |
| range 0 6 |
| help |
| Select the mode in which SATA should be driven. NATIVE AHCI, or RAID. |
| The default is NATIVE. |
| 0: NATIVE mode does not require a ROM. |
| 1: RAID mode must have the two ROM files. |
| 2: AHCI may work with or without AHCI ROM. It depends on the payload support. |
| For example, seabios does not require the AHCI ROM. |
| 3: LEGACY IDE |
| 4: IDE to AHCI |
| 5: AHCI7804: ROM Required, and AMD driver required in the OS. |
| 6: IDE to AHCI7804: ROM Required, and AMD driver required in the OS. |
| |
| comment "NATIVE" |
| depends on HUDSON_SATA_MODE = 0 |
| |
| comment "RAID" |
| depends on HUDSON_SATA_MODE = 1 |
| |
| comment "AHCI" |
| depends on HUDSON_SATA_MODE = 2 |
| |
| comment "LEGACY IDE" |
| depends on HUDSON_SATA_MODE = 3 |
| |
| comment "IDE to AHCI" |
| depends on HUDSON_SATA_MODE = 4 |
| |
| comment "AHCI7804" |
| depends on HUDSON_SATA_MODE = 5 |
| |
| comment "IDE to AHCI7804" |
| depends on HUDSON_SATA_MODE = 6 |
| |
| if HUDSON_SATA_MODE = 2 || HUDSON_SATA_MODE = 5 |
| |
| config AHCI_ROM_ID |
| string "AHCI device PCI IDs" |
| default "1022,7801" if HUDSON_SATA_MODE = 2 |
| default "1022,7804" if HUDSON_SATA_MODE = 5 |
| |
| config HUDSON_AHCI_ROM |
| bool "Add a AHCI ROM" |
| |
| config AHCI_ROM_FILE |
| string "AHCI ROM path and filename" |
| depends on HUDSON_AHCI_ROM |
| default "src/southbridge/amd/agesa/hudson/ahci.bin" |
| |
| endif |
| |
| if HUDSON_SATA_MODE = 1 |
| |
| config RAID_ROM_ID |
| string "RAID device PCI IDs" |
| default "1022,7802" |
| help |
| 1022,7802 for SATA NON-RAID5 module, 1022,7803 for SATA RAID5 mode |
| |
| config RAID_ROM_FILE |
| string "RAID ROM path and filename" |
| default "src/southbridge/amd/agesa/hudson/raid.bin" |
| |
| config RAID_MISC_ROM_FILE |
| string "RAID Misc ROM path and filename" |
| default "src/southbridge/amd/agesa/hudson/misc.bin" |
| |
| config RAID_MISC_ROM_POSITION |
| hex "RAID Misc ROM Position" |
| default 0xFFF00000 |
| help |
| The RAID ROM requires that the MISC ROM is located between the range |
| 0xFFF0_0000 to 0xFFF0_FFFF. Also, it must 1K bytes aligned. |
| The CONFIG_ROM_SIZE must be larger than 0x100000. |
| |
| endif |
| |
| config HUDSON_LEGACY_FREE |
| bool "System is legacy free" |
| help |
| Select y if there is no keyboard controller in the system. |
| This sets variables in AGESA and ACPI. |
| |
| config ACPI_ENABLE_THERMAL_ZONE |
| bool |
| default y |
| |
| endif # SOUTHBRIDGE_AMD_AGESA_HUDSON || SOUTHBRIDGE_AMD_AGESA_YANGTZE |
| |
| if SOUTHBRIDGE_AMD_AGESA_YANGTZE |
| config AZ_PIN |
| hex |
| default 0xaa |
| help |
| bit 1,0 - pin 0 |
| bit 3,2 - pin 1 |
| bit 5,4 - pin 2 |
| bit 7,6 - pin 3 |
| endif |