| ## SPDX-License-Identifier: GPL-2.0-only |
| |
| if SOC_INTEL_COOPERLAKE_SP |
| |
| config SOC_SPECIFIC_OPTIONS |
| def_bool y |
| select HAVE_INTEL_FSP_REPO |
| |
| config FSP_HEADER_PATH |
| default "3rdparty/fsp/CedarIslandFspBinPkg/Include" |
| |
| config FSP_FD_PATH |
| default "3rdparty/fsp/CedarIslandFspBinPkg/Fsp.fd" |
| |
| config MAX_SOCKET |
| int |
| default 2 |
| |
| config MAX_CPUS |
| int |
| default 255 |
| |
| config CPU_ADDR_BITS |
| int |
| default 46 |
| |
| config PCR_BASE_ADDRESS |
| hex |
| default 0xfd000000 |
| help |
| This option allows you to select MMIO Base Address of sideband bus. |
| |
| config DCACHE_RAM_BASE |
| hex |
| default 0xfe800000 |
| |
| config DCACHE_RAM_SIZE |
| hex |
| default 0x1fff00 |
| help |
| The size of the cache-as-ram region required during bootblock |
| and/or romstage. FSP-T reserves the upper 0x100 for |
| FspReservedBuffer. |
| |
| config DCACHE_BSP_STACK_SIZE |
| hex |
| default 0x40000 |
| help |
| The amount of anticipated stack usage in CAR by bootblock and |
| other stages. It needs to include FSP-M stack requirement and |
| CB romstage stack requirement. The integration documentation |
| says this needs to be 256KiB. |
| |
| config FSP_M_RC_HEAP_SIZE |
| hex |
| default 0x130000 |
| help |
| On xeon_sp/cpx FSP-M has two separate heap managers, one regular |
| whose size and base are controllable via the StackBase and |
| StackSize UPDs and a 'rc' heap manager that is statically |
| allocated at 0xfe800000 (the CAR base) and consumes about 0x130000 |
| bytes of memory. |
| |
| config CPU_MICROCODE_CBFS_LOC |
| hex |
| default 0xfff0fdc0 |
| |
| config CPU_MICROCODE_CBFS_LEN |
| hex |
| default 0x7C00 |
| |
| config HEAP_SIZE |
| hex |
| default 0x80000 |
| |
| config STACK_SIZE |
| hex |
| default 0x4000 |
| |
| config FSP_TEMP_RAM_SIZE |
| hex |
| depends on FSP_USES_CB_STACK |
| default 0x40000 |
| help |
| The amount of anticipated heap usage in CAR by FSP. |
| Refer to Platform FSP integration guide document to know |
| the exact FSP requirement for Heap setup. The FSP integration |
| documentation says this needs to be at least 128KiB, but practice |
| show this needs to be 256KiB or more. |
| |
| config IED_REGION_SIZE |
| hex |
| default 0x400000 |
| |
| config IFD_CHIPSET |
| string |
| default "lbg" |
| |
| config SOC_INTEL_COMMON_BLOCK_P2SB |
| def_bool y |
| |
| config CPU_BCLK_MHZ |
| int |
| default 100 |
| |
| # CPX-SP has 2 IMCs, 3 channels per IMC, 2 DIMMs per channel |
| # Default value is set to one socket, full config. |
| config DIMM_MAX |
| default 12 |
| |
| # DDR4 |
| config DIMM_SPD_SIZE |
| default 512 |
| |
| if INTEL_TXT |
| |
| config INTEL_TXT_SINIT_SIZE |
| hex |
| default 0x50000 |
| help |
| According to document number 572782 this needs to be 256KiB |
| for the SINIT module and 64KiB for SINIT data. |
| |
| config INTEL_TXT_HEAP_SIZE |
| hex |
| default 0xf0000 |
| help |
| This must be 960KiB according to 572782. |
| |
| endif # INTEL_TXT |
| |
| endif |