| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <acpi/acpi.h> |
| #include <baseboard/cbi_ssfc.h> |
| #include <baseboard/variants.h> |
| #include <boardid.h> |
| #include <bootstate.h> |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci_def.h> |
| #include <device/pci_ops.h> |
| #include <drivers/i2c/generic/chip.h> |
| #include <ec/google/chromeec/ec.h> |
| #include <ec/ec.h> |
| #include <intelblocks/xhci.h> |
| #include <nhlt.h> |
| #include <smbios.h> |
| #include <soc/cpu.h> |
| #include <soc/gpio.h> |
| #include <soc/nhlt.h> |
| #include <soc/pci_devs.h> |
| #include <stdint.h> |
| #include <variant/ec.h> |
| #include <variant/gpio.h> |
| |
| extern struct chip_operations drivers_i2c_generic_ops; |
| extern struct chip_operations drivers_i2c_cs42l42_ops; |
| extern struct chip_operations drivers_i2c_da7219_ops; |
| |
| static bool is_cnvi_held_in_reset(void) |
| { |
| struct device *dev = pcidev_path_on_root(PCH_DEVFN_CNVI); |
| uint32_t reg = pci_read_config32(dev, PCI_VENDOR_ID); |
| |
| /* |
| * If vendor/device ID for CNVi reads as 0xffffffff, then it is safe to |
| * assume that it is being held in reset. |
| */ |
| if (reg == 0xffffffff) |
| return true; |
| |
| return false; |
| } |
| |
| static void disable_wifi_wake(void) |
| { |
| static const struct pad_config wifi_wake_gpio[] = { |
| PAD_NC(GPIO_119, UP_20K), |
| }; |
| |
| gpio_configure_pads(wifi_wake_gpio, ARRAY_SIZE(wifi_wake_gpio)); |
| } |
| |
| /* |
| * GPIO_137 for two audio codecs right now has the different configuration so |
| * if SSFC indicates that codec is different than default one then GPIO_137 |
| * needs to be overridden for the corresponding second source. |
| */ |
| static void gpio_modification_by_ssfc(struct pad_config *table, size_t num) |
| { |
| /* For RT5682, GPIO 137 should be set as EDGE_BOTH. */ |
| const struct pad_config rt5682_gpio_137 = PAD_CFG_GPI_APIC_IOS(GPIO_137, |
| NONE, DEEP, EDGE_BOTH, INVERT, HIZCRx1, DISPUPD); |
| enum ssfc_audio_codec codec = ssfc_get_audio_codec(); |
| |
| if (table == NULL || num == 0) |
| return; |
| |
| /* |
| * Currently we only have the case of RT5682 as the second source. And |
| * in case of Ampton which used RT5682 as the default source, it didn't |
| * provide override_table right now so it will be returned earlier since |
| * table above is NULL. |
| */ |
| if ((codec != SSFC_AUDIO_CODEC_RT5682) && |
| (codec != SSFC_AUDIO_CODEC_RT5682_VS)) |
| return; |
| |
| while (num--) { |
| if (table->pad == GPIO_137) { |
| *table = rt5682_gpio_137; |
| printk(BIOS_INFO, |
| "Configure GPIO 137 based on SSFC.\n"); |
| return; |
| } |
| |
| table++; |
| } |
| } |
| |
| static void mainboard_init(void *chip_info) |
| { |
| int boardid; |
| const struct pad_config *base_pads; |
| const struct pad_config *override_pads; |
| size_t base_num, override_num; |
| |
| boardid = board_id(); |
| printk(BIOS_INFO, "Board ID: %d\n", boardid); |
| |
| base_pads = variant_base_gpio_table(&base_num); |
| override_pads = variant_override_gpio_table(&override_num); |
| gpio_modification_by_ssfc((struct pad_config *)override_pads, |
| override_num); |
| |
| gpio_configure_pads_with_override(base_pads, base_num, |
| override_pads, override_num); |
| |
| if (!is_cnvi_held_in_reset()) |
| disable_wifi_wake(); |
| |
| mainboard_ec_init(); |
| } |
| |
| static unsigned long mainboard_write_acpi_tables( |
| const struct device *device, unsigned long current, acpi_rsdp_t *rsdp) |
| { |
| uintptr_t start_addr; |
| uintptr_t end_addr; |
| struct nhlt *nhlt; |
| |
| start_addr = current; |
| |
| nhlt = nhlt_init(); |
| |
| if (nhlt == NULL) |
| return start_addr; |
| |
| variant_nhlt_init(nhlt); |
| |
| end_addr = nhlt_soc_serialize(nhlt, start_addr); |
| |
| if (end_addr != start_addr) |
| acpi_add_table(rsdp, (void *)start_addr); |
| |
| return end_addr; |
| } |
| |
| static void mainboard_enable(struct device *dev) |
| { |
| dev->ops->write_acpi_tables = mainboard_write_acpi_tables; |
| } |
| |
| struct chip_operations mainboard_ops = { |
| .init = mainboard_init, |
| .enable_dev = mainboard_enable, |
| }; |
| |
| void __weak variant_update_devtree(struct device *dev) |
| { |
| /* Place holder for common updates. */ |
| } |
| |
| /* |
| * Check if CNVi PCI device is released from reset. If yes, then the system is |
| * booting with CNVi module. In this case, the PCIe device for WiFi needs to |
| * be disabled. If CNVi device is held in reset, then disable it. |
| */ |
| static void wifi_device_update(void) |
| { |
| struct device *dev; |
| unsigned int devfn; |
| |
| if (is_cnvi_held_in_reset()) |
| devfn = PCH_DEVFN_CNVI; |
| else |
| devfn = PCH_DEVFN_PCIE1; |
| |
| dev = pcidev_path_on_root(devfn); |
| if (dev) |
| dev->enabled = 0; |
| } |
| |
| /* |
| * Base on SSFC value in the CBI from EC to enable one of audio codec sources in |
| * the device tree. |
| */ |
| static void audio_codec_device_update(void) |
| { |
| struct device *audio_dev = NULL; |
| struct bus *audio_i2c_bus = |
| pcidev_path_on_root(PCH_DEVFN_I2C5)->link_list; |
| enum ssfc_audio_codec codec = ssfc_get_audio_codec(); |
| |
| while ((audio_dev = dev_bus_each_child(audio_i2c_bus, audio_dev))) { |
| if (audio_dev->chip_info == NULL) |
| continue; |
| |
| if ((audio_dev->chip_ops == &drivers_i2c_da7219_ops) && |
| (codec == SSFC_AUDIO_CODEC_DA7219)) { |
| printk(BIOS_INFO, "enable DA7219.\n"); |
| continue; |
| } |
| |
| if (audio_dev->chip_ops == &drivers_i2c_generic_ops) { |
| struct drivers_i2c_generic_config *cfg = |
| audio_dev->chip_info; |
| |
| if ((cfg != NULL && !strcmp(cfg->hid, "10EC5682")) && |
| (codec == SSFC_AUDIO_CODEC_RT5682)) { |
| printk(BIOS_INFO, "enable RT5682 VD.\n"); |
| continue; |
| } |
| |
| if ((cfg != NULL && !strcmp(cfg->hid, "10EC5682")) && |
| (codec == SSFC_AUDIO_CODEC_RT5682_VS)) { |
| cfg->hid = "RTL5682"; |
| printk(BIOS_INFO, "enable RT5682 VS.\n"); |
| continue; |
| } |
| |
| if ((cfg != NULL && !strcmp(cfg->hid, "RTL5682")) && |
| (codec == SSFC_AUDIO_CODEC_RT5682_VS)) { |
| printk(BIOS_INFO, "enable RT5682 VS.\n"); |
| continue; |
| } |
| } |
| |
| if ((audio_dev->chip_ops == &drivers_i2c_cs42l42_ops) && |
| (codec == SSFC_AUDIO_CODEC_CS42L42)) { |
| printk(BIOS_INFO, "enable CS42L42.\n"); |
| continue; |
| } |
| |
| printk(BIOS_INFO, "%s has been disabled\n", audio_dev->chip_ops->name); |
| audio_dev->enabled = 0; |
| } |
| } |
| |
| void mainboard_devtree_update(struct device *dev) |
| { |
| /* Apply common devtree updates. */ |
| wifi_device_update(); |
| audio_codec_device_update(); |
| |
| /* Defer to variant for board-specific updates. */ |
| variant_update_devtree(dev); |
| } |
| |
| bool __weak variant_ext_usb_status(unsigned int port_type, unsigned int port_id) |
| { |
| /* All externally visible USB ports are present */ |
| return true; |
| } |
| |
| static void disable_unused_devices(void *unused) |
| { |
| usb_xhci_disable_unused(variant_ext_usb_status); |
| } |
| |
| BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_EXIT, disable_unused_devices, NULL); |