| # SPDX-License-Identifier: GPL-2.0-only |
| |
| chip soc/amd/cezanne |
| register "common_config.espi_config" = "{ |
| .std_io_decode_bitmap = ESPI_DECODE_IO_0x80_EN | ESPI_DECODE_IO_0X2E_0X2F_EN, |
| .io_mode = ESPI_IO_MODE_QUAD, |
| .op_freq_mhz = ESPI_OP_FREQ_16_MHZ, |
| .crc_check_enable = 1, |
| .alert_pin = ESPI_ALERT_PIN_PUSH_PULL, |
| .periph_ch_en = 1, |
| .vw_ch_en = 1, |
| .oob_ch_en = 1, |
| .flash_ch_en = 0, |
| }" |
| |
| # I2C Pad Control RX Select Configuration |
| register "i2c_pad_ctrl_rx_sel[0]" = "I2C_PAD_CTRL_RX_SEL_3_3V" |
| register "i2c_pad_ctrl_rx_sel[1]" = "I2C_PAD_CTRL_RX_SEL_3_3V" |
| register "i2c_pad_ctrl_rx_sel[2]" = "I2C_PAD_CTRL_RX_SEL_3_3V" |
| register "i2c_pad_ctrl_rx_sel[3]" = "I2C_PAD_CTRL_RX_SEL_3_3V" |
| |
| register "s0ix_enable" = "true" |
| |
| register "pspp_policy" = "DXIO_PSPP_BALANCED" |
| |
| device domain 0 on |
| device ref gpp_gfx_bridge_0 on end # MXM |
| device ref gpp_bridge_0 on end # NVMe |
| device ref gpp_bridge_1 on end |
| device ref gpp_bridge_2 on end # WWAN |
| device ref gpp_bridge_3 on end # LAN |
| device ref gpp_bridge_4 on end # WLAN |
| device ref gpp_bridge_5 on end |
| device ref gpp_bridge_a on # Internal GPP Bridge 0 to Bus A |
| device ref gfx on end # Internal GPU (GFX) |
| device ref crypto on end # Crypto Coprocessor |
| device ref xhci_0 on # USB 3.1 (USB0) |
| chip drivers/usb/acpi |
| device ref xhci_0_root_hub on |
| chip drivers/usb/acpi |
| device ref usb3_port0 on end |
| end |
| chip drivers/usb/acpi |
| device ref usb3_port1 on end |
| end |
| chip drivers/usb/acpi |
| device ref usb2_port0 on end |
| end |
| chip drivers/usb/acpi |
| device ref usb2_port1 on end |
| end |
| chip drivers/usb/acpi |
| device ref usb2_port2 on end |
| end |
| chip drivers/usb/acpi |
| device ref usb2_port3 on end |
| end |
| end |
| end |
| end |
| device ref xhci_1 on # USB 3.1 (USB1) |
| chip drivers/usb/acpi |
| device ref xhci_1_root_hub on |
| chip drivers/usb/acpi |
| device ref usb3_port4 on end |
| end |
| chip drivers/usb/acpi |
| device ref usb3_port5 on end |
| end |
| chip drivers/usb/acpi |
| device ref usb2_port4 on end |
| end |
| chip drivers/usb/acpi |
| device ref usb2_port5 on end |
| end |
| chip drivers/usb/acpi |
| device ref usb2_port6 on end |
| end |
| chip drivers/usb/acpi |
| device ref usb2_port7 on end |
| end |
| end |
| end |
| end |
| end |
| end |
| |
| device ref uart_0 on end # UART0 |
| |
| end |