| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2010 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <device/pci_ops.h> |
| #include "sb800.h" |
| |
| static void ide_init(struct device *dev) |
| { |
| struct southbridge_amd_sb800_config *conf; |
| /* Enable ide devices so the linux ide driver will work */ |
| u32 dword; |
| u8 byte; |
| |
| conf = dev->chip_info; |
| |
| /* RPR9.1 disable MSI */ |
| /* TODO: For A14, it should set as 1. I doubt it. */ |
| dword = pci_read_config32(dev, 0x70); |
| dword &= ~(1 << 16); |
| pci_write_config32(dev, 0x70, dword); |
| |
| /* Ultra DMA mode */ |
| /* enable UDMA */ |
| byte = pci_read_config8(dev, 0x54); |
| byte |= 1 << 0; |
| pci_write_config8(dev, 0x54, byte); |
| |
| /* Enable I/O Access&& Bus Master */ |
| dword = pci_read_config16(dev, 0x4); |
| dword |= 1 << 2; |
| pci_write_config16(dev, 0x4, dword); |
| |
| /* set ide as primary, if you want to boot from IDE, you'd better set it |
| * in mainboard/Config.lb */ |
| if (conf->boot_switch_sata_ide == 1) { |
| byte = pci_read_config8(dev, 0xAD); |
| byte |= 1 << 4; |
| pci_write_config8(dev, 0xAD, byte); |
| } |
| |
| #if CONFIG_PCI_ROM_RUN == 1 |
| pci_dev_init(dev); |
| #endif |
| } |
| |
| static struct pci_operations lops_pci = { |
| .set_subsystem = pci_dev_set_subsystem, |
| }; |
| |
| static struct device_operations ide_ops = { |
| .read_resources = pci_dev_read_resources, |
| .set_resources = pci_dev_set_resources, |
| .enable_resources = pci_dev_enable_resources, |
| .init = ide_init, |
| .scan_bus = 0, |
| .ops_pci = &lops_pci, |
| }; |
| |
| static const struct pci_driver ide_driver __pci_driver = { |
| .ops = &ide_ops, |
| .vendor = PCI_VENDOR_ID_ATI, |
| .device = PCI_DEVICE_ID_ATI_SB800_IDE, |
| }; |