| #include <console/console.h> |
| #include <arch/smp/mpspec.h> |
| #include <arch/ioapic.h> |
| #include <device/pci.h> |
| #include <string.h> |
| #include <stdint.h> |
| #if CONFIG_LOGICAL_CPUS==1 |
| #include <cpu/amd/multicore.h> |
| #endif |
| |
| static unsigned node_link_to_bus(unsigned node, unsigned link) |
| { |
| device_t dev; |
| unsigned reg; |
| |
| dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); |
| if (!dev) { |
| return 0; |
| } |
| for(reg = 0xE0; reg < 0xF0; reg += 0x04) { |
| uint32_t config_map; |
| unsigned dst_node; |
| unsigned dst_link; |
| unsigned bus_base; |
| config_map = pci_read_config32(dev, reg); |
| if ((config_map & 3) != 3) { |
| continue; |
| } |
| dst_node = (config_map >> 4) & 7; |
| dst_link = (config_map >> 8) & 3; |
| bus_base = (config_map >> 16) & 0xff; |
| #if 0 |
| printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", |
| dst_node, dst_link, bus_base, |
| reg, config_map); |
| #endif |
| if ((dst_node == node) && (dst_link == link)) |
| { |
| return bus_base; |
| } |
| } |
| return 0; |
| } |
| |
| static void *smp_write_config_table(void *v) |
| { |
| struct mp_config_table *mc; |
| int bus_isa; |
| unsigned char bus_chain_0; |
| unsigned char bus_8131_1; |
| unsigned char bus_8131_2; |
| unsigned char bus_8111_1; |
| unsigned apicid_base; |
| unsigned apicid_8111; |
| unsigned apicid_8131_1; |
| unsigned apicid_8131_2; |
| |
| mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); |
| |
| mptable_init(mc, LOCAL_APIC_ADDR); |
| |
| smp_write_processors(mc); |
| |
| { |
| device_t dev; |
| |
| /* HT chain 0 */ |
| bus_chain_0 = node_link_to_bus(0, 1); |
| if (bus_chain_0 == 0) { |
| printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); |
| bus_chain_0 = 1; |
| } |
| |
| /* 8111 */ |
| dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); |
| if (dev) { |
| bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); |
| |
| bus_8111_1 = 4; |
| } |
| /* 8131-1 */ |
| dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0)); |
| if (dev) { |
| bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); |
| |
| bus_8131_1 = 2; |
| } |
| /* 8131-2 */ |
| dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0)); |
| if (dev) { |
| bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| |
| } |
| else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); |
| |
| bus_8131_2 = 3; |
| } |
| } |
| |
| /*Bus: Bus ID Type*/ |
| mptable_write_buses(mc, NULL, &bus_isa); |
| |
| /*I/O APICs: APIC ID Version State Address*/ |
| #if CONFIG_LOGICAL_CPUS==1 |
| apicid_base = get_apicid_base(3); |
| #else |
| apicid_base = CONFIG_MAX_PHYSICAL_CPUS; |
| #endif |
| apicid_8111 = apicid_base+0; |
| apicid_8131_1 = apicid_base+1; |
| apicid_8131_2 = apicid_base+2; |
| smp_write_ioapic(mc, apicid_8111, 0x11, IO_APIC_ADDR); |
| { |
| device_t dev; |
| struct resource *res; |
| dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x1,1)); |
| if (dev) { |
| res = find_resource(dev, PCI_BASE_ADDRESS_0); |
| if (res) { |
| smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); |
| } |
| } |
| dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x2,1)); |
| if (dev) { |
| res = find_resource(dev, PCI_BASE_ADDRESS_0); |
| if (res) { |
| smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base); |
| } |
| } |
| |
| } |
| |
| mptable_add_isa_interrupts(mc, bus_isa, apicid_8111, 0); |
| |
| /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13); |
| |
| |
| //On Board AMD USB |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); |
| |
| //On Board Via USB 1.1 and 2 |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|0, apicid_8111, 0x11); //1.1 |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|1, apicid_8111, 0x10); //1.1 |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|2, apicid_8111, 0x12); //2 |
| |
| //Slot 5 PCI 32 |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|0, apicid_8111, 0x10); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|1, apicid_8111, 0x11); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|2, apicid_8111, 0x12); // |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|3, apicid_8111, 0x13); // |
| |
| |
| //On Board SI Serial ATA |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|0, apicid_8111, 0x13); |
| //On Board ATI Display Adapter |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (6<<2)|0, apicid_8111, 0x12); |
| |
| |
| //Slot 4 PCIX 100/66 |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|0, apicid_8131_1, 0x3); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|1, apicid_8131_1, 0x0); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);// |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);// |
| |
| //Slot 3 PCIX 100/66 |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);// |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);// |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|3, apicid_8131_1, 0x1);// |
| |
| //On Board LSI scsi and NIC |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|0, apicid_8131_1, 0x0); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|1, apicid_8131_1, 0x1); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, apicid_8131_1, 0x0); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|1, apicid_8131_1, 0x1); |
| |
| //Slot 2 PCI-X 133/100/66 |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, apicid_8131_2, 0x0); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, apicid_8131_2, 0x1); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, apicid_8131_2, 0x2); // |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, apicid_8131_2, 0x3); // |
| |
| //Slot 1 PCI-X 133/100/66 |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|0, apicid_8131_2, 0x1); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|1, apicid_8131_2, 0x2); |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|2, apicid_8131_2, 0x3);// |
| smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|3, apicid_8131_2, 0x0);// |
| |
| /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ |
| mptable_lintsrc(mc, bus_isa); |
| /* There is no extension information... */ |
| |
| /* Compute the checksums */ |
| return mptable_finalize(mc); |
| } |
| |
| unsigned long write_smp_table(unsigned long addr) |
| { |
| void *v; |
| v = smp_write_floating_table(addr, 0); |
| return (unsigned long)smp_write_config_table(v); |
| } |