| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <acpi/acpigen.h> |
| #include <amdblocks/data_fabric.h> |
| #include <amdblocks/root_complex.h> |
| #include <arch/ioapic.h> |
| #include <arch/vga.h> |
| #include <console/console.h> |
| #include <cpu/amd/mtrr.h> |
| #include <cpu/cpu.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ops.h> |
| #include <types.h> |
| |
| void amd_pci_domain_scan_bus(struct device *domain) |
| { |
| uint8_t segment_group, bus, limit; |
| |
| if (data_fabric_get_pci_bus_numbers(domain, &segment_group, &bus, &limit) != CB_SUCCESS) { |
| printk(BIOS_ERR, "No PCI bus numbers decoded to PCI root.\n"); |
| return; |
| } |
| |
| if (segment_group >= PCI_SEGMENT_GROUP_COUNT) { |
| printk(BIOS_ERR, "Skipping domain %u due to too large segment group %u.\n", |
| domain->path.domain.domain, segment_group); |
| return; |
| } |
| |
| /* TODO: Check if bus >= PCI_BUSES_PER_SEGMENT_GROUP and return in that case */ |
| |
| /* Make sure to not report more than PCI_BUSES_PER_SEGMENT_GROUP PCI buses */ |
| limit = MIN(limit, PCI_BUSES_PER_SEGMENT_GROUP - 1); |
| |
| /* Set bus first number of PCI root */ |
| domain->downstream->secondary = bus; |
| /* subordinate needs to be the same as secondary before pci_host_bridge_scan_bus call. */ |
| domain->downstream->subordinate = bus; |
| /* Tell allocator about maximum PCI bus number in domain */ |
| domain->downstream->max_subordinate = limit; |
| domain->downstream->segment_group = segment_group; |
| |
| pci_host_bridge_scan_bus(domain); |
| } |
| |
| static void print_df_mmio_outside_of_cpu_mmio_error(unsigned int reg) |
| { |
| printk(BIOS_WARNING, "DF MMIO register %u outside of CPU MMIO region.\n", reg); |
| } |
| |
| static bool is_mmio_region_valid(unsigned int reg, resource_t mmio_base, resource_t mmio_limit) |
| { |
| if (mmio_base > mmio_limit) { |
| printk(BIOS_WARNING, "DF MMIO register %u's base is above its limit.\n", reg); |
| return false; |
| } |
| if (mmio_base >= 4ULL * GiB) { |
| /* MMIO region above 4GB needs to be above TOP_MEM2 MSR value */ |
| if (mmio_base < get_top_of_mem_above_4gb()) { |
| print_df_mmio_outside_of_cpu_mmio_error(reg); |
| return false; |
| } |
| } else { |
| /* MMIO region below 4GB needs to be above TOP_MEM MSR value */ |
| if (mmio_base < get_top_of_mem_below_4gb()) { |
| print_df_mmio_outside_of_cpu_mmio_error(reg); |
| return false; |
| } |
| /* MMIO region below 4GB mustn't cross the 4GB boundary. */ |
| if (mmio_limit >= 4ULL * GiB) { |
| printk(BIOS_WARNING, "DF MMIO register %u crosses 4GB boundary.\n", |
| reg); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static void report_data_fabric_mmio(struct device *domain, unsigned long idx, |
| resource_t mmio_base, resource_t mmio_limit) |
| { |
| struct resource *res; |
| res = new_resource(domain, idx); |
| res->base = mmio_base; |
| res->limit = mmio_limit; |
| res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED; |
| } |
| |
| /* Tell the resource allocator about the usable MMIO ranges configured in the data fabric */ |
| static void add_data_fabric_mmio_regions(struct device *domain, unsigned long *idx) |
| { |
| const signed int iohc_dest_fabric_id = get_iohc_fabric_id(domain); |
| union df_mmio_control ctrl; |
| resource_t mmio_base; |
| resource_t mmio_limit; |
| |
| /* The last 12GB of the usable address space are reserved and can't be used for MMIO */ |
| const resource_t reserved_upper_mmio_base = |
| (1ULL << cpu_phys_address_size()) - DF_RESERVED_TOP_12GB_MMIO_SIZE; |
| |
| for (unsigned int i = 0; i < DF_MMIO_REG_SET_COUNT; i++) { |
| ctrl.raw = data_fabric_broadcast_read32(DF_MMIO_CONTROL(i)); |
| |
| /* Relevant MMIO regions need to have both reads and writes enabled */ |
| if (!ctrl.we || !ctrl.re) |
| continue; |
| |
| /* Non-posted region contains fixed FCH MMIO devices */ |
| if (ctrl.np) |
| continue; |
| |
| /* Only look at MMIO regions that are decoded to the right PCI root */ |
| if (ctrl.dst_fabric_id != iohc_dest_fabric_id) |
| continue; |
| |
| data_fabric_get_mmio_base_size(i, &mmio_base, &mmio_limit); |
| |
| if (!is_mmio_region_valid(i, mmio_base, mmio_limit)) |
| continue; |
| |
| /* Make sure to not report a region overlapping with the fixed MMIO resources |
| below 4GB or the reserved MMIO range in the last 12GB of the addressable |
| address range. The code assumes that the fixed MMIO resources below 4GB |
| are between IO_APIC_ADDR and the 4GB boundary. */ |
| if (mmio_base < 4ULL * GiB) { |
| if (mmio_base >= IO_APIC_ADDR) |
| continue; |
| if (mmio_limit >= IO_APIC_ADDR) |
| mmio_limit = IO_APIC_ADDR - 1; |
| } else { |
| if (mmio_base >= reserved_upper_mmio_base) |
| continue; |
| if (mmio_limit >= reserved_upper_mmio_base) |
| mmio_limit = reserved_upper_mmio_base - 1; |
| } |
| |
| report_data_fabric_mmio(domain, (*idx)++, mmio_base, mmio_limit); |
| } |
| } |
| |
| static void report_data_fabric_io(struct device *domain, unsigned long idx, |
| resource_t io_base, resource_t io_limit) |
| { |
| struct resource *res; |
| res = new_resource(domain, idx); |
| res->base = io_base; |
| res->limit = io_limit; |
| res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED; |
| } |
| |
| /* Tell the resource allocator about the usable I/O space */ |
| static void add_data_fabric_io_regions(struct device *domain, unsigned long *idx) |
| { |
| const signed int iohc_dest_fabric_id = get_iohc_fabric_id(domain); |
| union df_io_base base_reg; |
| union df_io_limit limit_reg; |
| resource_t io_base; |
| resource_t io_limit; |
| |
| for (unsigned int i = 0; i < DF_IO_REG_COUNT; i++) { |
| base_reg.raw = data_fabric_broadcast_read32(DF_IO_BASE(i)); |
| |
| /* Relevant IO regions need to have both reads and writes enabled */ |
| if (!base_reg.we || !base_reg.re) |
| continue; |
| |
| limit_reg.raw = data_fabric_broadcast_read32(DF_IO_LIMIT(i)); |
| |
| /* Only look at IO regions that are decoded to the right PCI root */ |
| if (limit_reg.dst_fabric_id != iohc_dest_fabric_id) |
| continue; |
| |
| io_base = base_reg.io_base << DF_IO_ADDR_SHIFT; |
| io_limit = ((limit_reg.io_limit + 1) << DF_IO_ADDR_SHIFT) - 1; |
| |
| /* Beware that the lower 25 bits of io_base and io_limit can be non-zero |
| despite there only being 16 bits worth of IO port address space. */ |
| if (io_base > 0xffff) { |
| printk(BIOS_WARNING, "DF IO base register %d value outside of valid " |
| "IO port address range.\n", i); |
| continue; |
| } |
| /* If only the IO limit is outside of the valid 16 bit IO port range, report |
| the limit as 0xffff, so that the resource allcator won't put IO BARs outside |
| of the 16 bit IO port address range. */ |
| io_limit = MIN(io_limit, 0xffff); |
| |
| report_data_fabric_io(domain, (*idx)++, io_base, io_limit); |
| } |
| } |
| |
| void amd_pci_domain_read_resources(struct device *domain) |
| { |
| unsigned long idx = 0; |
| |
| add_data_fabric_io_regions(domain, &idx); |
| |
| add_data_fabric_mmio_regions(domain, &idx); |
| |
| read_non_pci_resources(domain, &idx); |
| |
| /* Only add the SoC's DRAM memory map and fixed resources once */ |
| if (domain->path.domain.domain == 0) { |
| read_soc_memmap_resources(domain, &idx); |
| } |
| } |
| |
| static void write_ssdt_domain_io_producer_range_helper(const char *domain_name, |
| resource_t base, resource_t limit) |
| { |
| printk(BIOS_DEBUG, "%s _CRS: adding IO range [%llx-%llx]\n", domain_name, base, limit); |
| acpigen_resource_producer_io(base, limit); |
| } |
| |
| static void write_ssdt_domain_io_producer_range(const char *domain_name, |
| resource_t base, resource_t limit) |
| { |
| /* |
| * Split the IO region at the PCI config IO ports so that the IO resource producer |
| * won't cover the same IO ports that the IO resource consumer for the PCI config IO |
| * ports in the same ACPI device already covers. |
| */ |
| if (base < PCI_IO_CONFIG_INDEX) { |
| write_ssdt_domain_io_producer_range_helper(domain_name, |
| base, |
| MIN(limit, PCI_IO_CONFIG_INDEX - 1)); |
| } |
| if (limit > PCI_IO_CONFIG_LAST_PORT) { |
| write_ssdt_domain_io_producer_range_helper(domain_name, |
| MAX(base, PCI_IO_CONFIG_LAST_PORT + 1), |
| limit); |
| } |
| } |
| |
| static void write_ssdt_domain_mmio_producer_range(const char *domain_name, |
| resource_t base, resource_t limit) |
| { |
| printk(BIOS_DEBUG, "%s _CRS: adding MMIO range [%llx-%llx]\n", |
| domain_name, base, limit); |
| acpigen_resource_producer_mmio(base, limit, |
| MEM_RSRC_FLAG_MEM_READ_WRITE | MEM_RSRC_FLAG_MEM_ATTR_NON_CACHE); |
| } |
| |
| void amd_pci_domain_fill_ssdt(const struct device *domain) |
| { |
| const char *acpi_scope = acpi_device_path(domain); |
| printk(BIOS_DEBUG, "%s ACPI scope: '%s'\n", __func__, acpi_scope); |
| acpigen_write_scope(acpi_device_path(domain)); |
| |
| acpigen_write_name("_CRS"); |
| acpigen_write_resourcetemplate_header(); |
| |
| /* PCI bus number range in domain */ |
| printk(BIOS_DEBUG, "%s _CRS: adding busses [%x-%x] in segment group %x\n", |
| acpi_device_name(domain), domain->downstream->secondary, |
| domain->downstream->max_subordinate, domain->downstream->segment_group); |
| acpigen_resource_producer_bus_number(domain->downstream->secondary, |
| domain->downstream->max_subordinate); |
| |
| if (domain->path.domain.domain == 0) { |
| /* ACPI 6.4.2.5 I/O Port Descriptor */ |
| acpigen_write_io16(PCI_IO_CONFIG_INDEX, PCI_IO_CONFIG_LAST_PORT, 1, |
| PCI_IO_CONFIG_PORT_COUNT, 1); |
| } |
| |
| struct resource *res; |
| for (res = domain->resource_list; res != NULL; res = res->next) { |
| if (!(res->flags & IORESOURCE_ASSIGNED)) |
| continue; |
| /* Don't add MMIO producer ranges for reserved MMIO regions from non-PCI |
| devices */ |
| if ((res->flags & IORESOURCE_RESERVE)) |
| continue; |
| switch (res->flags & IORESOURCE_TYPE_MASK) { |
| case IORESOURCE_IO: |
| write_ssdt_domain_io_producer_range(acpi_device_name(domain), |
| res->base, res->limit); |
| break; |
| case IORESOURCE_MEM: |
| write_ssdt_domain_mmio_producer_range(acpi_device_name(domain), |
| res->base, res->limit); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| if (domain->downstream->bridge_ctrl & PCI_BRIDGE_CTL_VGA) { |
| printk(BIOS_DEBUG, "%s _CRS: adding VGA resource\n", acpi_device_name(domain)); |
| acpigen_resource_producer_mmio(VGA_MMIO_BASE, VGA_MMIO_LIMIT, |
| MEM_RSRC_FLAG_MEM_READ_WRITE | MEM_RSRC_FLAG_MEM_ATTR_CACHE); |
| } |
| |
| acpigen_write_resourcetemplate_footer(); |
| |
| acpigen_write_SEG(domain->downstream->segment_group); |
| acpigen_write_BBN(domain->downstream->secondary); |
| /* Scope */ |
| acpigen_pop_len(); |
| } |