| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| |
| #define __SIMPLE_DEVICE__ |
| |
| #include <arch/ioapic.h> |
| #include <assert.h> |
| #include <console/console.h> |
| #include <device/pci.h> |
| #include <device/pci_ops.h> |
| #include <intelblocks/itss.h> |
| #include <intelblocks/lpc_lib.h> |
| #include <intelblocks/pcr.h> |
| #include <lib.h> |
| #include "lpc_def.h" |
| #include <soc/irq.h> |
| #include <soc/pci_devs.h> |
| #include <soc/pcr_ids.h> |
| |
| uint16_t lpc_enable_fixed_io_ranges(uint16_t io_enables) |
| { |
| uint16_t reg_io_enables; |
| |
| reg_io_enables = pci_read_config16(PCH_DEV_LPC, LPC_IO_ENABLES); |
| io_enables |= reg_io_enables; |
| pci_write_config16(PCH_DEV_LPC, LPC_IO_ENABLES, io_enables); |
| if (CONFIG(SOC_INTEL_COMMON_BLOCK_LPC_MIRROR_TO_DMI)) |
| pcr_write16(PID_DMI, PCR_DMI_LPCIOE, io_enables); |
| |
| return io_enables; |
| } |
| |
| uint16_t lpc_get_fixed_io_decode(void) |
| { |
| return pci_read_config16(PCH_DEV_LPC, LPC_IO_DECODE); |
| } |
| |
| uint16_t lpc_set_fixed_io_ranges(uint16_t io_ranges, uint16_t mask) |
| { |
| uint16_t reg_io_ranges; |
| |
| reg_io_ranges = lpc_get_fixed_io_decode() & ~mask; |
| io_ranges |= reg_io_ranges & mask; |
| pci_write_config16(PCH_DEV_LPC, LPC_IO_DECODE, io_ranges); |
| if (CONFIG(SOC_INTEL_COMMON_BLOCK_LPC_MIRROR_TO_DMI)) |
| pcr_write16(PID_DMI, PCR_DMI_LPCIOD, io_ranges); |
| |
| return io_ranges; |
| } |
| |
| /* |
| * Find the first unused IO window. |
| * Returns -1 if not found, 0 for reg 0x84, 1 for reg 0x88 ... |
| */ |
| static int find_unused_pmio_window(void) |
| { |
| int i; |
| uint32_t lgir; |
| |
| for (i = 0; i < LPC_NUM_GENERIC_IO_RANGES; i++) { |
| lgir = pci_read_config32(PCH_DEV_LPC, LPC_GENERIC_IO_RANGE(i)); |
| |
| if (!(lgir & LPC_LGIR_EN)) |
| return i; |
| } |
| |
| return -1; |
| } |
| |
| void lpc_open_pmio_window(uint16_t base, uint16_t size) |
| { |
| int i, lgir_reg_num; |
| uint32_t lgir_reg_offset, lgir, window_size, alignment; |
| resource_t bridged_size, bridge_base; |
| |
| printk(BIOS_SPEW, "LPC: Trying to open IO window from %x size %x\n", |
| base, size); |
| |
| bridged_size = 0; |
| bridge_base = base; |
| |
| while (bridged_size < size) { |
| /* Each IO range register can only open a 256-byte window. */ |
| window_size = MIN(size, LPC_LGIR_MAX_WINDOW_SIZE); |
| |
| if (window_size <= 0) |
| return; |
| |
| /* Window size must be a power of two for the AMASK to work. */ |
| alignment = 1UL << (log2_ceil(window_size)); |
| window_size = ALIGN_UP(window_size, alignment); |
| |
| /* Address[15:2] in LGIR[15:12] and Mask[7:2] in LGIR[23:18]. */ |
| lgir = (bridge_base & LPC_LGIR_ADDR_MASK) | LPC_LGIR_EN; |
| lgir |= ((window_size - 1) << 16) & LPC_LGIR_AMASK_MASK; |
| |
| /* Skip programming if same range already programmed. */ |
| for (i = 0; i < LPC_NUM_GENERIC_IO_RANGES; i++) { |
| if (lgir == pci_read_config32(PCH_DEV_LPC, |
| LPC_GENERIC_IO_RANGE(i))) |
| return; |
| } |
| |
| lgir_reg_num = find_unused_pmio_window(); |
| if (lgir_reg_num < 0) { |
| printk(BIOS_ERR, |
| "LPC: Cannot open IO window: %llx size %llx\n", |
| bridge_base, size - bridged_size); |
| printk(BIOS_ERR, "No more IO windows\n"); |
| return; |
| } |
| lgir_reg_offset = LPC_GENERIC_IO_RANGE(lgir_reg_num); |
| |
| pci_write_config32(PCH_DEV_LPC, lgir_reg_offset, lgir); |
| if (CONFIG(SOC_INTEL_COMMON_BLOCK_LPC_MIRROR_TO_DMI)) |
| pcr_write32(PID_DMI, PCR_DMI_LPCLGIR1 + lgir_reg_num * 4, lgir); |
| |
| printk(BIOS_DEBUG, |
| "LPC: Opened IO window LGIR%d: base %llx size %x\n", |
| lgir_reg_num, bridge_base, window_size); |
| |
| bridged_size += window_size; |
| bridge_base += window_size; |
| } |
| } |
| |
| void lpc_open_mmio_window(uintptr_t base, size_t size) |
| { |
| uint32_t lgmr; |
| |
| lgmr = pci_read_config32(PCH_DEV_LPC, LPC_GENERIC_MEM_RANGE); |
| |
| if (lgmr & LPC_LGMR_EN) { |
| printk(BIOS_ERR, |
| "LPC: Cannot open window to resource %lx size %zx\n", |
| base, size); |
| printk(BIOS_ERR, "LPC: MMIO window already in use\n"); |
| return; |
| } |
| |
| if (size > LPC_LGMR_WINDOW_SIZE) { |
| printk(BIOS_WARNING, |
| "LPC: Resource %lx size %zx larger than window(%x)\n", |
| base, size, LPC_LGMR_WINDOW_SIZE); |
| } |
| |
| lgmr = (base & LPC_LGMR_ADDR_MASK) | LPC_LGMR_EN; |
| |
| pci_write_config32(PCH_DEV_LPC, LPC_GENERIC_MEM_RANGE, lgmr); |
| if (CONFIG(SOC_INTEL_COMMON_BLOCK_LPC_MIRROR_TO_DMI)) |
| pcr_write32(PID_DMI, PCR_DMI_LPCGMR, lgmr); |
| } |
| |
| /* |
| * Set FAST_SPIBAR BIOS Control register based on input bit field. |
| */ |
| static void lpc_set_bios_control_reg(uint8_t bios_cntl_bit) |
| { |
| pci_devfn_t dev = PCH_DEV_LPC; |
| uint8_t bc_cntl; |
| |
| assert(IS_POWER_OF_2(bios_cntl_bit)); |
| bc_cntl = pci_read_config8(dev, LPC_BIOS_CNTL); |
| bc_cntl |= bios_cntl_bit; |
| pci_write_config8(dev, LPC_BIOS_CNTL, bc_cntl); |
| |
| /* |
| * Ensure an additional read back after performing lock down |
| */ |
| pci_read_config8(PCH_DEV_LPC, LPC_BIOS_CNTL); |
| } |
| |
| /* |
| * Set LPC BIOS Control BILD bit. |
| */ |
| void lpc_set_bios_interface_lock_down(void) |
| { |
| lpc_set_bios_control_reg(LPC_BC_BILD); |
| } |
| |
| /* |
| * Set LPC BIOS Control LE bit. |
| */ |
| void lpc_set_lock_enable(void) |
| { |
| lpc_set_bios_control_reg(LPC_BC_LE); |
| } |
| |
| /* |
| * Set LPC BIOS Control EISS bit. |
| */ |
| void lpc_set_eiss(void) |
| { |
| lpc_set_bios_control_reg(LPC_BC_EISS); |
| } |
| |
| /* |
| * Set LPC Serial IRQ mode. |
| */ |
| void lpc_set_serirq_mode(enum serirq_mode mode) |
| { |
| pci_devfn_t dev = PCH_DEV_LPC; |
| uint8_t scnt; |
| |
| scnt = pci_read_config8(dev, LPC_SERIRQ_CTL); |
| scnt &= ~(LPC_SCNT_EN | LPC_SCNT_MODE); |
| |
| switch (mode) { |
| case SERIRQ_QUIET: |
| scnt |= LPC_SCNT_EN; |
| break; |
| case SERIRQ_CONTINUOUS: |
| scnt |= LPC_SCNT_EN | LPC_SCNT_MODE; |
| break; |
| case SERIRQ_OFF: |
| default: |
| break; |
| } |
| |
| pci_write_config8(dev, LPC_SERIRQ_CTL, scnt); |
| } |
| |
| void lpc_io_setup_comm_a_b(void) |
| { |
| /* ComA Range 3F8h-3FFh [2:0] */ |
| uint16_t com_ranges = LPC_IOD_COMA_RANGE; |
| uint16_t com_enable = LPC_IOE_COMA_EN; |
| uint16_t com_mask = LPC_IOD_COMA_RANGE_MASK; |
| |
| /* ComB Range 2F8h-2FFh [6:4] */ |
| if (CONFIG(SOC_INTEL_COMMON_BLOCK_LPC_COMB_ENABLE)) { |
| com_ranges |= LPC_IOD_COMB_RANGE; |
| com_enable |= LPC_IOE_COMB_EN; |
| com_mask |= LPC_IOD_COMB_RANGE_MASK; |
| } |
| |
| /* Setup I/O Decode Range Register for LPC */ |
| lpc_set_fixed_io_ranges(com_ranges, com_mask); |
| /* Enable ComA and ComB Port */ |
| lpc_enable_fixed_io_ranges(com_enable); |
| } |
| |
| static void lpc_set_gen_decode_range( |
| uint32_t gen_io_dec[LPC_NUM_GENERIC_IO_RANGES]) |
| { |
| size_t i; |
| |
| /* Set in PCI generic decode range registers */ |
| for (i = 0; i < LPC_NUM_GENERIC_IO_RANGES; i++) { |
| pci_write_config32(PCH_DEV_LPC, LPC_GENERIC_IO_RANGE(i), gen_io_dec[i]); |
| if (CONFIG(SOC_INTEL_COMMON_BLOCK_LPC_MIRROR_TO_DMI)) |
| pcr_write32(PID_DMI, PCR_DMI_LPCLGIR1 + i * 4, gen_io_dec[i]); |
| } |
| } |
| |
| void pch_enable_lpc(void) |
| { |
| uint32_t gen_io_dec[LPC_NUM_GENERIC_IO_RANGES]; |
| |
| soc_get_gen_io_dec_range(gen_io_dec); |
| lpc_set_gen_decode_range(gen_io_dec); |
| if (ENV_PAYLOAD_LOADER) |
| pch_pirq_init(); |
| } |
| |
| void lpc_enable_pci_clk_cntl(void) |
| { |
| pci_write_config8(PCH_DEV_LPC, LPC_PCCTL, LPC_PCCTL_CLKRUN_EN); |
| } |
| |
| void lpc_disable_clkrun(void) |
| { |
| const uint8_t pcctl = pci_read_config8(PCH_DEV_LPC, LPC_PCCTL); |
| pci_write_config8(PCH_DEV_LPC, LPC_PCCTL, pcctl & ~LPC_PCCTL_CLKRUN_EN); |
| } |
| |
| /* Enable PCH IOAPIC */ |
| void pch_enable_ioapic(void) |
| { |
| uint32_t reg32; |
| /* PCH-LP has 120 redirection entries */ |
| const int redir_entries = 120; |
| |
| set_ioapic_id((void *)IO_APIC_ADDR, 0x02); |
| |
| /* affirm full set of redirection table entries ("write once") */ |
| reg32 = io_apic_read((void *)IO_APIC_ADDR, 0x01); |
| |
| reg32 &= ~0x00ff0000; |
| reg32 |= (redir_entries - 1) << 16; |
| |
| io_apic_write((void *)IO_APIC_ADDR, 0x01, reg32); |
| |
| /* |
| * Select Boot Configuration register (0x03) and |
| * use Processor System Bus (0x01) to deliver interrupts. |
| */ |
| io_apic_write((void *)IO_APIC_ADDR, 0x03, 0x01); |
| } |
| |
| /* |
| * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control |
| * 0x00 - 0000 = Reserved |
| * 0x01 - 0001 = Reserved |
| * 0x02 - 0010 = Reserved |
| * 0x03 - 0011 = IRQ3 |
| * 0x04 - 0100 = IRQ4 |
| * 0x05 - 0101 = IRQ5 |
| * 0x06 - 0110 = IRQ6 |
| * 0x07 - 0111 = IRQ7 |
| * 0x08 - 1000 = Reserved |
| * 0x09 - 1001 = IRQ9 |
| * 0x0A - 1010 = IRQ10 |
| * 0x0B - 1011 = IRQ11 |
| * 0x0C - 1100 = IRQ12 |
| * 0x0D - 1101 = Reserved |
| * 0x0E - 1110 = IRQ14 |
| * 0x0F - 1111 = IRQ15 |
| * PIRQ[n]_ROUT[7] - PIRQ Routing Control |
| * 0x80 - The PIRQ is not routed. |
| */ |
| void pch_pirq_init(void) |
| { |
| const struct device *irq_dev; |
| uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG]; |
| |
| pch_interrupt_routing[0] = PCH_IRQ11; |
| pch_interrupt_routing[1] = PCH_IRQ10; |
| pch_interrupt_routing[2] = PCH_IRQ11; |
| pch_interrupt_routing[3] = PCH_IRQ11; |
| pch_interrupt_routing[4] = PCH_IRQ11; |
| pch_interrupt_routing[5] = PCH_IRQ11; |
| pch_interrupt_routing[6] = PCH_IRQ11; |
| pch_interrupt_routing[7] = PCH_IRQ11; |
| |
| itss_irq_init(pch_interrupt_routing); |
| |
| for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { |
| uint8_t int_pin = 0, int_line = 0; |
| |
| if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) |
| continue; |
| |
| int_pin = pci_read_config8(PCI_BDF(irq_dev), PCI_INTERRUPT_PIN); |
| |
| switch (int_pin) { |
| case 1: /* INTA# */ |
| int_line = PCH_IRQ11; |
| break; |
| case 2: /* INTB# */ |
| int_line = PCH_IRQ10; |
| break; |
| case 3: /* INTC# */ |
| int_line = PCH_IRQ11; |
| break; |
| case 4: /* INTD# */ |
| int_line = PCH_IRQ11; |
| break; |
| } |
| |
| if (!int_line) |
| continue; |
| |
| pci_write_config8(PCI_BDF(irq_dev), PCI_INTERRUPT_LINE, int_line); |
| } |
| } |
| |
| #define PPI_PORT_B 0x61 |
| #define SERR_DIS (1 << 2) |
| #define CMOS_NMI 0x70 |
| #define NMI_DIS (1 << 7) |
| |
| /* LPC MISC programming */ |
| void pch_misc_init(void) |
| { |
| uint8_t reg8; |
| |
| /* Setup NMI on errors, disable SERR */ |
| reg8 = (inb(PPI_PORT_B)) & 0xf0; |
| outb((reg8 | SERR_DIS), PPI_PORT_B); |
| |
| /* Disable NMI sources */ |
| outb(NMI_DIS, CMOS_NMI); |
| } |