| /* |
| * This file is part of the coreboot project. |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <console/console.h> |
| #include <device/pci_ids.h> |
| #include <soc/pci_devs.h> |
| #include <soc/reg_access.h> |
| |
| /* USB Phy Registers */ |
| #define USB2_GLOBAL_PORT 0x4001 |
| #define USB2_PLL1 0x7F02 |
| #define USB2_PLL2 0x7F03 |
| #define USB2_COMPBG 0x7F04 |
| |
| /* EHCI Packet Buffer OUT/IN Thresholds, values in number of DWORDs */ |
| #define EHCI_OUT_THRESHOLD_VALUE 0x7f |
| #define EHCI_IN_THRESHOLD_VALUE 0x7f |
| |
| /* Platform init USB device interrupt masks */ |
| #define V_IOH_USBDEVICE_D_INTR_MSK_UDC_REG (0x0000007f) |
| #define V_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG \ |
| (B_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG_OUT_EP_MASK \ |
| | B_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG_IN_EP_MASK) |
| |
| /* In order to configure the USB PHY to use clk120 (ickusbcoreclk) as PLL |
| * reference clock and Port2 as a USB device port, the following sequence must |
| * be followed |
| */ |
| static const struct reg_script ehci_init_script[] = { |
| |
| /* Set packet buffer OUT/IN thresholds */ |
| REG_MMIO_RMW32(R_IOH_EHCI_INSNREG01, |
| ~(B_IOH_EHCI_INSNREG01_OUT_THRESHOLD_MASK |
| | B_IOH_EHCI_INSNREG01_IN_THRESHOLD_MASK), |
| (EHCI_OUT_THRESHOLD_VALUE |
| << B_IOH_EHCI_INSNREG01_OUT_THRESHOLD_BP) |
| | (EHCI_IN_THRESHOLD_VALUE |
| << B_IOH_EHCI_INSNREG01_IN_THRESHOLD_BP)), |
| |
| /* Sighting #4930631 PDNRESCFG [8:7] of USB2_GLOBAL_PORT = 11b. |
| * For port 0 & 1 as host and port 2 as device. |
| */ |
| REG_USB_RXW(USB2_GLOBAL_PORT, ~(BIT8 | BIT7 | BIT1), (BIT8 | BIT7)), |
| |
| /* |
| * Sighting #4930653 Required BIOS change on Disconnect vref to change |
| * to 600mV. |
| */ |
| REG_USB_RXW(USB2_COMPBG, ~(BIT10 | BIT9 | BIT8 | BIT7), |
| (BIT10 | BIT7)), |
| |
| /* Sideband register write to USB AFE (Phy) |
| * (pllbypass) to bypass/Disable PLL before switch |
| */ |
| REG_USB_OR(USB2_PLL2, BIT29), |
| |
| /* Sideband register write to USB AFE (Phy) |
| * (coreclksel) to select 120MHz (ickusbcoreclk) clk source. |
| * (Default 0 to select 96MHz (ickusbclk96_npad/ppad)) |
| */ |
| REG_USB_OR(USB2_PLL1, BIT1), |
| |
| /* Sideband register write to USB AFE (Phy) |
| * (divide by 8) to achieve internal 480MHz clock |
| * for 120MHz input refclk. (Default: 4'b1000 (divide by 10) for 96MHz) |
| */ |
| REG_USB_RXW(USB2_PLL1, ~(BIT6 | BIT5 | BIT4 | BIT3), BIT6), |
| |
| /* Sideband register write to USB AFE (Phy) |
| * Clear (pllbypass) |
| */ |
| REG_USB_AND(USB2_PLL2, ~BIT29), |
| |
| /* Sideband register write to USB AFE (Phy) |
| * Set (startlock) to force the PLL FSM to restart the lock |
| * sequence due to input clock/freq switch. |
| */ |
| REG_USB_OR(USB2_PLL2, BIT24), |
| REG_SCRIPT_END |
| }; |
| |
| static const struct reg_script usb_device_port_init_script[] = { |
| |
| /* Mask and clear controller interrupts */ |
| REG_MMIO_WRITE32(R_IOH_USBDEVICE_D_INTR_MSK_UDC_REG, |
| V_IOH_USBDEVICE_D_INTR_MSK_UDC_REG), |
| REG_MMIO_WRITE32(R_IOH_USBDEVICE_D_INTR_UDC_REG, |
| V_IOH_USBDEVICE_D_INTR_MSK_UDC_REG), |
| |
| /* Mask and clear end point interrupts */ |
| REG_MMIO_WRITE32(R_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG, |
| V_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG), |
| REG_MMIO_WRITE32(R_IOH_USBDEVICE_EP_INTR_UDC_REG, |
| V_IOH_USBDEVICE_EP_INTR_MSK_UDC_REG), |
| REG_SCRIPT_END |
| }; |
| |
| static void init(struct device *dev) |
| { |
| if ((dev->path.pci.devfn & 7) == EHCI_FUNC) { |
| printk(BIOS_INFO, "Initializing USB PLLs\n"); |
| reg_script_run_on_dev(dev, ehci_init_script); |
| } else { |
| printk(BIOS_INFO, "Initializing USB device port\n"); |
| reg_script_run_on_dev(dev, usb_device_port_init_script); |
| } |
| } |
| |
| static struct device_operations device_ops = { |
| .read_resources = pci_dev_read_resources, |
| .set_resources = pci_dev_set_resources, |
| .enable_resources = pci_dev_enable_resources, |
| .init = init, |
| }; |
| |
| static const struct pci_driver driver __pci_driver = { |
| .ops = &device_ops, |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = EHCI_DEVID, |
| }; |