| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <amdblocks/agesawrapper.h> |
| #include <amdblocks/BiosCallOuts.h> |
| #include <cbmem.h> |
| #include <string.h> |
| |
| static void *agesa_heap_base(void) |
| { |
| return cbmem_add(CBMEM_ID_RESUME_SCRATCH, BIOS_HEAP_SIZE); |
| } |
| |
| static void EmptyHeap(int unused) |
| { |
| void *BiosManagerPtr = agesa_heap_base(); |
| memset(BiosManagerPtr, 0, BIOS_HEAP_SIZE); |
| } |
| |
| /* |
| * Name agesa_GetTempHeapBase |
| * Brief description Get the location for TempRam, the target location in |
| * memory where AmdInitPost copies the heap prior to CAR |
| * teardown. AmdInitEnv calls this function after |
| * teardown for the source address when relocation the |
| * heap to its final location. |
| * Input parameters |
| * Func Unused |
| * Data Unused |
| * ConfigPtr Pointer to type AGESA_TEMP_HEAP_BASE_PARAMS |
| * Output parameters |
| * Status Indicates whether TempHeapAddress was successfully |
| * set. |
| */ |
| AGESA_STATUS agesa_GetTempHeapBase(uint32_t Func, uintptr_t Data, |
| void *ConfigPtr) |
| { |
| AGESA_TEMP_HEAP_BASE_PARAMS *pTempHeapBase; |
| |
| pTempHeapBase = (AGESA_TEMP_HEAP_BASE_PARAMS *)ConfigPtr; |
| pTempHeapBase->TempHeapAddress = CONFIG_PI_AGESA_TEMP_RAM_BASE; |
| |
| return AGESA_SUCCESS; |
| } |
| |
| /* |
| * Name agesa_HeapRebase |
| * Brief description AGESA may use internal hardcoded locations for its |
| * heap. Modern implementations allow the base to be |
| * overridden by calling agesa_HeapRebase. |
| * Input parameters |
| * Func Unused |
| * Data Unused |
| * ConfigPtr Pointer to type AGESA_REBASE_PARAMS |
| * Output parameters |
| * Status Indicates whether HeapAddress was successfully |
| * set. |
| */ |
| AGESA_STATUS agesa_HeapRebase(uint32_t Func, uintptr_t Data, void *ConfigPtr) |
| { |
| AGESA_REBASE_PARAMS *Rebase; |
| |
| Rebase = (AGESA_REBASE_PARAMS *)ConfigPtr; |
| Rebase->HeapAddress = (uintptr_t)agesa_heap_base(); |
| if (!Rebase->HeapAddress) |
| Rebase->HeapAddress = CONFIG_PI_AGESA_CAR_HEAP_BASE; |
| |
| return AGESA_SUCCESS; |
| } |
| |
| /* |
| * Name FindAllocatedNode |
| * Brief description Find an allocated node that matches the handle. |
| * Input parameter The desired handle. |
| * Output parameters |
| * pointer Here is returned either the found node or the last |
| * allocated node if the handle is not found. This is |
| * intentional, as the field NextNode of this node will |
| * have to be filled with the offset of the node being |
| * created in procedure agesa_AllocateBuffer(). |
| * Status Indicates if the node was or was not found. |
| */ |
| static AGESA_STATUS FindAllocatedNode(uint32_t handle, |
| BIOS_BUFFER_NODE **last_allocd_or_match) |
| { |
| uint32_t AllocNodeOffset; |
| uint8_t *BiosHeapBaseAddr; |
| BIOS_BUFFER_NODE *AllocNodePtr; |
| BIOS_HEAP_MANAGER *BiosHeapBasePtr; |
| AGESA_STATUS Status = AGESA_SUCCESS; |
| |
| BiosHeapBaseAddr = agesa_heap_base(); |
| BiosHeapBasePtr = (BIOS_HEAP_MANAGER *)BiosHeapBaseAddr; |
| |
| AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes; |
| AllocNodePtr = (BIOS_BUFFER_NODE *)(BiosHeapBaseAddr + AllocNodeOffset); |
| |
| while (handle != AllocNodePtr->BufferHandle) { |
| if (AllocNodePtr->NextNodeOffset == 0) { |
| Status = AGESA_BOUNDS_CHK; |
| break; |
| } |
| AllocNodeOffset = AllocNodePtr->NextNodeOffset; |
| AllocNodePtr = (BIOS_BUFFER_NODE *)(BiosHeapBaseAddr + |
| AllocNodeOffset); |
| } |
| *last_allocd_or_match = AllocNodePtr; |
| return Status; |
| } |
| |
| /* |
| * Name ConcatenateNodes |
| * Brief description Concatenates two adjacent nodes into a single node, |
| * this procedure is used by agesa_DeallocateBuffer(). |
| * Input parameters |
| * FirstNodePtr This node is in the front, its header will be |
| * maintained. |
| * SecondNodePtr This node is in the back, its header will be cleared. |
| */ |
| static void ConcatenateNodes(BIOS_BUFFER_NODE *FirstNodePtr, |
| BIOS_BUFFER_NODE *SecondNodePtr) |
| { |
| FirstNodePtr->BufferSize += SecondNodePtr->BufferSize + |
| sizeof(BIOS_BUFFER_NODE); |
| FirstNodePtr->NextNodeOffset = SecondNodePtr->NextNodeOffset; |
| |
| /* Zero out the SecondNode header */ |
| memset(SecondNodePtr, 0, sizeof(BIOS_BUFFER_NODE)); |
| } |
| |
| CBMEM_CREATION_HOOK(EmptyHeap); |
| |
| AGESA_STATUS agesa_AllocateBuffer(uint32_t Func, uintptr_t Data, |
| void *ConfigPtr) |
| { |
| /* |
| * Size variables explanation: |
| * FreedNodeSize - the size of the buffer node being examined, |
| * will be copied to BestFitNodeSize if the node |
| * is selected as a possible best fit. |
| * BestFitNodeSize - the size qf the buffer of the node currently |
| * considered the best fit. |
| * MinimumSize - the requested size + sizeof(BIOS_BUFFER_NODE). |
| * Its the minimum size for the buffer to be broken |
| * down into 2 nodes, once a node is selected as |
| * the best fit. |
| */ |
| uint32_t AvailableHeapSize; |
| uint8_t *BiosHeapBaseAddr; |
| uint32_t CurrNodeOffset; |
| uint32_t PrevNodeOffset; |
| uint32_t FreedNodeOffset; |
| uint32_t FreedNodeSize; |
| uint32_t BestFitNodeOffset; |
| uint32_t BestFitNodeSize; |
| uint32_t BestFitPrevNodeOffset; |
| uint32_t NextFreeOffset; |
| uint32_t MinimumSize; |
| BIOS_BUFFER_NODE *CurrNodePtr; |
| BIOS_BUFFER_NODE *FreedNodePtr; |
| BIOS_BUFFER_NODE *BestFitNodePtr; |
| BIOS_BUFFER_NODE *BestFitPrevNodePtr; |
| BIOS_BUFFER_NODE *NextFreePtr; |
| BIOS_HEAP_MANAGER *BiosHeapBasePtr; |
| AGESA_BUFFER_PARAMS *AllocParams; |
| AGESA_STATUS Status; |
| |
| AllocParams = ((AGESA_BUFFER_PARAMS *)ConfigPtr); |
| AllocParams->BufferPointer = NULL; |
| MinimumSize = AllocParams->BufferLength + sizeof(BIOS_BUFFER_NODE); |
| |
| AvailableHeapSize = BIOS_HEAP_SIZE - sizeof(BIOS_HEAP_MANAGER); |
| BestFitNodeSize = AvailableHeapSize; /* init with largest possible */ |
| BiosHeapBaseAddr = agesa_heap_base(); |
| BiosHeapBasePtr = (BIOS_HEAP_MANAGER *)BiosHeapBaseAddr; |
| |
| if (BiosHeapBasePtr->StartOfAllocatedNodes == 0) { |
| /* First allocation */ |
| CurrNodeOffset = sizeof(BIOS_HEAP_MANAGER); |
| CurrNodePtr = (BIOS_BUFFER_NODE *)(BiosHeapBaseAddr |
| + CurrNodeOffset); |
| CurrNodePtr->BufferHandle = AllocParams->BufferHandle; |
| CurrNodePtr->BufferSize = AllocParams->BufferLength; |
| CurrNodePtr->NextNodeOffset = 0; |
| AllocParams->BufferPointer = (uint8_t *)CurrNodePtr |
| + sizeof(BIOS_BUFFER_NODE); |
| |
| /* Update the remaining free space */ |
| FreedNodeOffset = CurrNodeOffset + CurrNodePtr->BufferSize |
| + sizeof(BIOS_BUFFER_NODE); |
| FreedNodePtr = (BIOS_BUFFER_NODE *)(BiosHeapBaseAddr |
| + FreedNodeOffset); |
| FreedNodePtr->BufferSize = AvailableHeapSize |
| - (FreedNodeOffset - CurrNodeOffset) |
| - sizeof(BIOS_BUFFER_NODE); |
| FreedNodePtr->NextNodeOffset = 0; |
| |
| /* Update the offsets for Allocated and Freed nodes */ |
| BiosHeapBasePtr->StartOfAllocatedNodes = CurrNodeOffset; |
| BiosHeapBasePtr->StartOfFreedNodes = FreedNodeOffset; |
| } else { |
| /* |
| * Find out whether BufferHandle has been allocated on the heap. |
| * If it has, return AGESA_BOUNDS_CHK. |
| */ |
| Status = FindAllocatedNode(AllocParams->BufferHandle, |
| &CurrNodePtr); |
| if (Status == AGESA_SUCCESS) |
| return AGESA_BOUNDS_CHK; |
| |
| /* |
| * If status ditn't returned AGESA_SUCCESS, CurrNodePtr here |
| * points to the end of the allocated nodes list. |
| */ |
| |
| /* Find the node that best fits the requested buffer size */ |
| FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes; |
| PrevNodeOffset = FreedNodeOffset; |
| BestFitNodeOffset = 0; |
| BestFitPrevNodeOffset = 0; |
| while (FreedNodeOffset != 0) { |
| FreedNodePtr = (BIOS_BUFFER_NODE *)(BiosHeapBaseAddr |
| + FreedNodeOffset); |
| FreedNodeSize = FreedNodePtr->BufferSize; |
| if (FreedNodeSize >= MinimumSize) { |
| if (BestFitNodeOffset == 0) { |
| /* |
| * First node that fits the requested |
| * buffer size |
| */ |
| BestFitNodeOffset = FreedNodeOffset; |
| BestFitPrevNodeOffset = PrevNodeOffset; |
| BestFitNodeSize = FreedNodeSize; |
| } else { |
| /* |
| * Find out whether current node is a |
| * betterfit than the previous nodes |
| */ |
| if (BestFitNodeSize > FreedNodeSize) { |
| |
| BestFitNodeOffset = |
| FreedNodeOffset; |
| BestFitPrevNodeOffset = |
| PrevNodeOffset; |
| BestFitNodeSize = FreedNodeSize; |
| } |
| } |
| } |
| PrevNodeOffset = FreedNodeOffset; |
| FreedNodeOffset = FreedNodePtr->NextNodeOffset; |
| } /* end of while loop */ |
| |
| if (BestFitNodeOffset == 0) { |
| /* |
| * If we could not find a node that fits the requested |
| * buffer size, return AGESA_BOUNDS_CHK. |
| */ |
| return AGESA_BOUNDS_CHK; |
| } |
| |
| BestFitNodePtr = (BIOS_BUFFER_NODE *)(BiosHeapBaseAddr |
| + BestFitNodeOffset); |
| BestFitPrevNodePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + |
| BestFitPrevNodeOffset); |
| |
| /* |
| * If BestFitNode is larger than the requested buffer, |
| * fragment the node further |
| */ |
| if (BestFitNodePtr->BufferSize > MinimumSize) { |
| NextFreeOffset = BestFitNodeOffset + MinimumSize; |
| NextFreePtr = (BIOS_BUFFER_NODE *) (BiosHeapBaseAddr + |
| NextFreeOffset); |
| NextFreePtr->BufferSize = BestFitNodeSize - MinimumSize; |
| |
| /* Remove BestFitNode from list of Freed nodes */ |
| NextFreePtr->NextNodeOffset = |
| BestFitNodePtr->NextNodeOffset; |
| } else { |
| /* |
| * Otherwise, next free node is NextNodeOffset of |
| * BestFitNode. Remove it from list of Freed nodes. |
| */ |
| NextFreeOffset = BestFitNodePtr->NextNodeOffset; |
| } |
| |
| /* |
| * If BestFitNode is the first buffer in the list, then |
| * update StartOfFreedNodes to reflect new free node. |
| */ |
| if (BestFitNodeOffset == BiosHeapBasePtr->StartOfFreedNodes) |
| BiosHeapBasePtr->StartOfFreedNodes = NextFreeOffset; |
| else |
| BestFitPrevNodePtr->NextNodeOffset = NextFreeOffset; |
| |
| /* Add BestFitNode to the list of Allocated nodes */ |
| CurrNodePtr->NextNodeOffset = BestFitNodeOffset; |
| BestFitNodePtr->BufferSize = AllocParams->BufferLength; |
| BestFitNodePtr->BufferHandle = AllocParams->BufferHandle; |
| BestFitNodePtr->NextNodeOffset = 0; |
| |
| AllocParams->BufferPointer = (uint8_t *)BestFitNodePtr + |
| sizeof(BIOS_BUFFER_NODE); |
| } |
| |
| return AGESA_SUCCESS; |
| } |
| |
| AGESA_STATUS agesa_DeallocateBuffer(uint32_t Func, uintptr_t Data, |
| void *ConfigPtr) |
| { |
| |
| uint8_t *BiosHeapBaseAddr; |
| uint32_t AllocNodeOffset; |
| uint32_t PrevNodeOffset; |
| uint32_t NextNodeOffset; |
| uint32_t FreedNodeOffset; |
| uint32_t EndNodeOffset; |
| BIOS_BUFFER_NODE *AllocNodePtr; |
| BIOS_BUFFER_NODE *PrevNodePtr; |
| BIOS_BUFFER_NODE *FreedNodePtr; |
| BIOS_BUFFER_NODE *NextNodePtr; |
| BIOS_HEAP_MANAGER *BiosHeapBasePtr; |
| AGESA_BUFFER_PARAMS *AllocParams; |
| |
| AllocParams = (AGESA_BUFFER_PARAMS *)ConfigPtr; |
| |
| BiosHeapBaseAddr = agesa_heap_base(); |
| BiosHeapBasePtr = (BIOS_HEAP_MANAGER *)BiosHeapBaseAddr; |
| |
| /* Find target node to deallocate in list of allocated nodes. |
| * Return AGESA_BOUNDS_CHK if the BufferHandle is not found. |
| */ |
| AllocNodeOffset = BiosHeapBasePtr->StartOfAllocatedNodes; |
| AllocNodePtr = (BIOS_BUFFER_NODE *)(BiosHeapBaseAddr + AllocNodeOffset); |
| PrevNodeOffset = AllocNodeOffset; |
| |
| while (AllocNodePtr->BufferHandle != AllocParams->BufferHandle) { |
| if (AllocNodePtr->NextNodeOffset == 0) |
| return AGESA_BOUNDS_CHK; |
| PrevNodeOffset = AllocNodeOffset; |
| AllocNodeOffset = AllocNodePtr->NextNodeOffset; |
| AllocNodePtr = (BIOS_BUFFER_NODE *)(BiosHeapBaseAddr |
| + AllocNodeOffset); |
| } |
| |
| /* Remove target node from list of allocated nodes */ |
| PrevNodePtr = (BIOS_BUFFER_NODE *)(BiosHeapBaseAddr + PrevNodeOffset); |
| PrevNodePtr->NextNodeOffset = AllocNodePtr->NextNodeOffset; |
| |
| /* Zero out the buffer, and clear the BufferHandle */ |
| memset((uint8_t *)AllocNodePtr + sizeof(BIOS_BUFFER_NODE), 0, |
| AllocNodePtr->BufferSize); |
| AllocNodePtr->BufferHandle = 0; |
| |
| /* Add deallocated node in order to the list of freed nodes */ |
| FreedNodeOffset = BiosHeapBasePtr->StartOfFreedNodes; |
| FreedNodePtr = (BIOS_BUFFER_NODE *)(BiosHeapBaseAddr + FreedNodeOffset); |
| |
| EndNodeOffset = AllocNodeOffset + AllocNodePtr->BufferSize + |
| sizeof(BIOS_BUFFER_NODE); |
| |
| if (AllocNodeOffset < FreedNodeOffset) { |
| /* Add to the start of the freed list */ |
| if (EndNodeOffset == FreedNodeOffset) { |
| /* If the freed node is adjacent to the first node in |
| * the list, concatenate both nodes |
| */ |
| ConcatenateNodes(AllocNodePtr, FreedNodePtr); |
| } else { |
| /* Otherwise, add freed node to the start of the list |
| * Update NextNodeOffset and BufferSize to include the |
| * size of BIOS_BUFFER_NODE. |
| */ |
| AllocNodePtr->NextNodeOffset = FreedNodeOffset; |
| } |
| /* Update StartOfFreedNodes to the new first node */ |
| BiosHeapBasePtr->StartOfFreedNodes = AllocNodeOffset; |
| } else { |
| /* Traverse list of freed nodes to find where the deallocated |
| * node should be placed. |
| */ |
| NextNodeOffset = FreedNodeOffset; |
| NextNodePtr = FreedNodePtr; |
| while (AllocNodeOffset > NextNodeOffset) { |
| PrevNodeOffset = NextNodeOffset; |
| if (NextNodePtr->NextNodeOffset == 0) |
| break; |
| NextNodeOffset = NextNodePtr->NextNodeOffset; |
| NextNodePtr = (BIOS_BUFFER_NODE *)(BiosHeapBaseAddr |
| + NextNodeOffset); |
| } |
| |
| /* If deallocated node is adjacent to the next node, |
| * concatenate both nodes. |
| */ |
| if (NextNodeOffset == EndNodeOffset) { |
| NextNodePtr = (BIOS_BUFFER_NODE *)(BiosHeapBaseAddr |
| + NextNodeOffset); |
| ConcatenateNodes(AllocNodePtr, NextNodePtr); |
| } else { |
| /*AllocNodePtr->NextNodeOffset = |
| * FreedNodePtr->NextNodeOffset; */ |
| AllocNodePtr->NextNodeOffset = NextNodeOffset; |
| } |
| /* |
| * If deallocated node is adjacent to the previous node, |
| * concatenate both nodes. |
| */ |
| PrevNodePtr = (BIOS_BUFFER_NODE *)(BiosHeapBaseAddr |
| + PrevNodeOffset); |
| EndNodeOffset = PrevNodeOffset + PrevNodePtr->BufferSize + |
| sizeof(BIOS_BUFFER_NODE); |
| |
| if (AllocNodeOffset == EndNodeOffset) |
| ConcatenateNodes(PrevNodePtr, AllocNodePtr); |
| else |
| PrevNodePtr->NextNodeOffset = AllocNodeOffset; |
| } |
| return AGESA_SUCCESS; |
| } |
| |
| AGESA_STATUS agesa_LocateBuffer(uint32_t Func, uintptr_t Data, void *ConfigPtr) |
| { |
| BIOS_BUFFER_NODE *AllocNodePtr; |
| AGESA_BUFFER_PARAMS *AllocParams; |
| AGESA_STATUS Status; |
| |
| AllocParams = (AGESA_BUFFER_PARAMS *)ConfigPtr; |
| |
| Status = FindAllocatedNode(AllocParams->BufferHandle, &AllocNodePtr); |
| |
| if (Status == AGESA_SUCCESS) { |
| AllocParams->BufferPointer = (uint8_t *)((uint8_t *)AllocNodePtr |
| + sizeof(BIOS_BUFFER_NODE)); |
| AllocParams->BufferLength = AllocNodePtr->BufferSize; |
| } |
| |
| return Status; |
| |
| } |