| /** @file |
| Provides the services required to access a block I/O 2 device during PEI recovery |
| boot mode. |
| |
| Copyright (c) 2015, Intel Corporation. All rights reserved.<BR> |
| SPDX-License-Identifier: BSD-2-Clause-Patent |
| |
| @par Revision Reference: |
| This PPI is defined in UEFI Platform Initialization Specification 1.4 Volume 1: |
| Pre-EFI Initialization Core Interface. |
| |
| **/ |
| |
| #ifndef _PEI_BLOCK_IO2_H_ |
| #define _PEI_BLOCK_IO2_H_ |
| |
| #include <Ppi/BlockIo.h> |
| #include <Protocol/DevicePath.h> |
| |
| /// |
| /// Global ID for EFI_PEI_RECOVERY_BLOCK_IO2_PPI |
| /// |
| #define EFI_PEI_RECOVERY_BLOCK_IO2_PPI_GUID \ |
| { \ |
| 0x26cc0fad, 0xbeb3, 0x478a, { 0x91, 0xb2, 0xc, 0x18, 0x8f, 0x72, 0x61, 0x98 } \ |
| } |
| |
| /// |
| /// The forward declaration for EFI_PEI_RECOVERY_BLOCK_IO_PPI. |
| /// |
| typedef struct _EFI_PEI_RECOVERY_BLOCK_IO2_PPI EFI_PEI_RECOVERY_BLOCK_IO2_PPI; |
| |
| #define EFI_PEI_RECOVERY_BLOCK_IO2_PPI_REVISION 0x00010000 |
| |
| typedef struct { |
| /// |
| /// A type of interface that the device being referenced by DeviceIndex is |
| /// attached to. This field re-uses Messaging Device Path Node sub-type values |
| /// as defined by Section 9.3.5 Messaging Device Path of UEFI Specification. |
| /// When more than one sub-type is associated with the interface, sub-type with |
| /// the smallest number must be used. |
| /// |
| UINT8 InterfaceType; |
| /// |
| /// A flag that indicates if media is removable. |
| /// |
| BOOLEAN RemovableMedia; |
| /// |
| /// A flag that indicates if media is present. This flag is always set for |
| /// non-removable media devices. |
| /// |
| BOOLEAN MediaPresent; |
| /// |
| /// A flag that indicates if media is read-only. |
| /// |
| BOOLEAN ReadOnly; |
| /// |
| /// The size of a logical block in bytes. |
| /// |
| UINT32 BlockSize; |
| /// |
| /// The last logical block that the device supports. |
| /// |
| EFI_PEI_LBA LastBlock; |
| } EFI_PEI_BLOCK_IO2_MEDIA; |
| |
| /** |
| Gets the count of block I/O devices that one specific block driver detects. |
| |
| This function is used for getting the count of block I/O devices that one |
| specific block driver detects. To the PEI ATAPI driver, it returns the number |
| of all the detected ATAPI devices it detects during the enumeration process. |
| To the PEI legacy floppy driver, it returns the number of all the legacy |
| devices it finds during its enumeration process. If no device is detected, |
| then the function will return zero. |
| |
| @param[in] PeiServices General-purpose services that are available |
| to every PEIM. |
| @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI |
| instance. |
| @param[out] NumberBlockDevices The number of block I/O devices discovered. |
| |
| @retval EFI_SUCCESS The operation performed successfully. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_PEI_GET_NUMBER_BLOCK_DEVICES2)( |
| IN EFI_PEI_SERVICES **PeiServices, |
| IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This, |
| OUT UINTN *NumberBlockDevices |
| ); |
| |
| /** |
| Gets a block device's media information. |
| |
| This function will provide the caller with the specified block device's media |
| information. If the media changes, calling this function will update the media |
| information accordingly. |
| |
| @param[in] PeiServices General-purpose services that are available to every |
| PEIM |
| @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance. |
| @param[in] DeviceIndex Specifies the block device to which the function wants |
| to talk. Because the driver that implements Block I/O |
| PPIs will manage multiple block devices, the PPIs that |
| want to talk to a single device must specify the |
| device index that was assigned during the enumeration |
| process. This index is a number from one to |
| NumberBlockDevices. |
| @param[out] MediaInfo The media information of the specified block media. |
| The caller is responsible for the ownership of this |
| data structure. |
| |
| @par Note: |
| The MediaInfo structure describes an enumeration of possible block device |
| types. This enumeration exists because no device paths are actually passed |
| across interfaces that describe the type or class of hardware that is publishing |
| the block I/O interface. This enumeration will allow for policy decisions |
| in the Recovery PEIM, such as "Try to recover from legacy floppy first, |
| LS-120 second, CD-ROM third." If there are multiple partitions abstracted |
| by a given device type, they should be reported in ascending order; this |
| order also applies to nested partitions, such as legacy MBR, where the |
| outermost partitions would have precedence in the reporting order. The |
| same logic applies to systems such as IDE that have precedence relationships |
| like "Master/Slave" or "Primary/Secondary". The master device should be |
| reported first, the slave second. |
| |
| @retval EFI_SUCCESS Media information about the specified block device |
| was obtained successfully. |
| @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware |
| error. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_PEI_GET_DEVICE_MEDIA_INFORMATION2)( |
| IN EFI_PEI_SERVICES **PeiServices, |
| IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This, |
| IN UINTN DeviceIndex, |
| OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo |
| ); |
| |
| /** |
| Reads the requested number of blocks from the specified block device. |
| |
| The function reads the requested number of blocks from the device. All the |
| blocks are read, or an error is returned. If there is no media in the device, |
| the function returns EFI_NO_MEDIA. |
| |
| @param[in] PeiServices General-purpose services that are available to |
| every PEIM. |
| @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance. |
| @param[in] DeviceIndex Specifies the block device to which the function wants |
| to talk. Because the driver that implements Block I/O |
| PPIs will manage multiple block devices, PPIs that |
| want to talk to a single device must specify the device |
| index that was assigned during the enumeration process. |
| This index is a number from one to NumberBlockDevices. |
| @param[in] StartLBA The starting logical block address (LBA) to read from |
| on the device |
| @param[in] BufferSize The size of the Buffer in bytes. This number must be |
| a multiple of the intrinsic block size of the device. |
| @param[out] Buffer A pointer to the destination buffer for the data. |
| The caller is responsible for the ownership of the |
| buffer. |
| |
| @retval EFI_SUCCESS The data was read correctly from the device. |
| @retval EFI_DEVICE_ERROR The device reported an error while attempting |
| to perform the read operation. |
| @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not |
| valid, or the buffer is not properly aligned. |
| @retval EFI_NO_MEDIA There is no media in the device. |
| @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of |
| the intrinsic block size of the device. |
| |
| **/ |
| typedef |
| EFI_STATUS |
| (EFIAPI *EFI_PEI_READ_BLOCKS2)( |
| IN EFI_PEI_SERVICES **PeiServices, |
| IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This, |
| IN UINTN DeviceIndex, |
| IN EFI_PEI_LBA StartLBA, |
| IN UINTN BufferSize, |
| OUT VOID *Buffer |
| ); |
| |
| /// |
| /// EFI_PEI_RECOVERY_BLOCK_IO_PPI provides the services that are required |
| /// to access a block I/O device during PEI recovery boot mode. |
| /// |
| struct _EFI_PEI_RECOVERY_BLOCK_IO2_PPI { |
| /// |
| /// The revision to which the interface adheres. |
| /// All future revisions must be backwards compatible. |
| /// |
| UINT64 Revision; |
| /// |
| /// Gets the number of block I/O devices that the specific block driver manages. |
| /// |
| EFI_PEI_GET_NUMBER_BLOCK_DEVICES2 GetNumberOfBlockDevices; |
| |
| /// |
| /// Gets the specified media information. |
| /// |
| EFI_PEI_GET_DEVICE_MEDIA_INFORMATION2 GetBlockDeviceMediaInfo; |
| |
| /// |
| /// Reads the requested number of blocks from the specified block device. |
| /// |
| EFI_PEI_READ_BLOCKS2 ReadBlocks; |
| }; |
| |
| extern EFI_GUID gEfiPeiVirtualBlockIo2PpiGuid; |
| |
| #endif |