src/mainboard/prodrive/hermes/romstage.c

/* SPDX-License-Identifier: GPL-2.0-only */

#include <soc/cnl_memcfg_init.h>
#include <soc/romstage.h>

#include "eeprom.h"

static const struct cnl_mb_cfg baseboard_mem_cfg = {
	/* Access memory info through SMBUS. */
	.spd[0] = {
		.read_type = READ_SMBUS,
		.spd_spec = {.spd_smbus_address = 0xa0}
	},
	.spd[1] = {
		.read_type = READ_SMBUS,
		.spd_spec = {.spd_smbus_address = 0xa2}
	},
	.spd[2] = {
		.read_type = READ_SMBUS,
		.spd_spec = {.spd_smbus_address = 0xa4}
	},
	.spd[3] = {
		.read_type = READ_SMBUS,
		.spd_spec = {.spd_smbus_address = 0xa6}
	},

	/* Rcomp resistors on CFL-S are located on the CPU itself */
	.rcomp_resistor = {121, 75, 100},

	/* Rcomp target values for CFL-S, DDR4 and 2 DIMMs per channel */
	.rcomp_targets = {60, 26, 20, 20, 26},

	/* Baseboard is an interleaved design */
	.dq_pins_interleaved = 1,

	/* Baseboard is using config 2 for vref_ca */
	.vref_ca_config = 2,

	/* Disable Early Command Training */
	.ect = 0,
};

void mainboard_memory_init_params(FSPM_UPD *memupd)
{
	memupd->FspmConfig.UserBd = BOARD_TYPE_SERVER;
	memupd->FspmTestConfig.SmbusSpdWriteDisable = 0;
	cannonlake_memcfg_init(&memupd->FspmConfig, &baseboard_mem_cfg);

	/* Tell FSP-M about the desired primary video adapter so that GGC is set up properly */
	const struct eeprom_board_settings *board_cfg = get_board_settings();
	if (board_cfg && board_cfg->primary_video == PRIMARY_VIDEO_INTEL)
		memupd->FspmConfig.PrimaryDisplay = 0; /* iGPU is primary */

	/* Overwrite memupd */
	if (!check_signature(offsetof(struct eeprom_layout, mupd), FSPM_UPD_SIGNATURE))
		return;

	READ_EEPROM_FSP_M(memupd, FspmConfig.RMT);
	READ_EEPROM_FSP_M(memupd, FspmConfig.HyperThreading);
	READ_EEPROM_FSP_M(memupd, FspmConfig.BootFrequency);
	READ_EEPROM_FSP_M(memupd, FspmTestConfig.VtdDisable);
}