| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #ifndef SUPERIO_FINTEK_F81803_HWM_H |
| #define SUPERIO_FINTEK_F81803_HWM_H |
| |
| #define TP_SENSOR_TYPE 0x6b |
| #define TP_SENSOR1_TYPE_SHIFT 1 |
| #define TP_SENSOR2_TYPE_SHIFT 2 |
| #define TP_SENSOR_TYPE_MASK 0x01 |
| #define TP_DIODE_STATUS 0x6f |
| #define TP_MMX_OPEN 0x40 |
| #define TP_PECI_OPEN 0x20 |
| #define TP_TSI_OPEN 0x10 |
| #define TP_EXTERNAL_SENSOR2_OPEN 0x04 |
| #define TP_EXTERNAL_SENSOR1_OPEN 0x02 |
| |
| #define FAN_TYPE_REG 0x94 |
| #define FAN_TYPE_SHIFT(fan) ((fan - 1) * 2) |
| #define FAN_TYPE_MASK 0x03 |
| #define FAN_MODE_REG 0x96 |
| /* FUNC_PROG_SEL = 0 */ |
| #define FAN_MODE_SHIFT(fan) ((fan - 1) * 4) |
| #define FAN_MODE_MASK 0x07 |
| /* FUNC_PROG_SEL = 1 */ |
| #define FAN1_ADJ_SEL_SHIFT 0 |
| #define FAN1_ADJ_SEL_MASK 0x07 |
| #define FAN_FREQ_SEL_ADD_SHIFT(fan) (fan + 2) |
| #define FAN_UP_RATE_REG 0x9a |
| #define FAN_RATE_SHIFT(fan) ((fan - 1) * 2) |
| #define FAN_RATE_MASK 0x03 |
| #define FAN_DOWN_RATE_REG 0x9b |
| #define FAN_DOWN_RATE_DIFF_FROM_UP_SHIFT 7 /* FUNC_PROG_SEL = 1 */ |
| #define FAN_DIRECT_LOAD_EN_SHIFT 6 /* FUNC_PROG_SEL = 1 */ |
| #define FAN_FAULT_TIME_REG 0x9f |
| #define FAN_FUNC_PROG_SEL_SHIFT 7 |
| |
| #define FAN_BOUND_TEMP 0xa6 /* 4 temperatures */ |
| #define FAN_SECTION_SPEED 0xaa /* 5 sections */ |
| #define FAN_TMP_MAPPING 0xaf |
| #define FAN_TEMP_SEL_HIGH_SHIFT 7 |
| #define FAN_PWM_FREQ_SEL_SHIFT 6 |
| #define FAN_INTERPOLATION_SHIFT 4 |
| #define FAN_JUMP_UP_SHIFT 3 |
| #define FAN_JUMP_DOWN_SHIFT 2 |
| #define FAN_TEMP_SEL_LOW_SHIFT 0 |
| #define FAN_TEMP_SEL_LOW_MASK 0x03 |
| #define FAN_BIT_MASK 0x01 |
| |
| #define FAN_ADJUST(fan, start) (((fan - 1) * 0x10) + start) |
| |
| #define STATUS_INVALID_VALUE -1 |
| #define STATUS_INVALID_ORDER -2 |
| |
| #define FIRST_FAN 1 |
| #define LAST_FAN 2 |
| #define MAX_DUTY 100 |
| |
| #endif /* SUPERIO_FINTEK_F81803_HWM_H */ |